Used Casing In for sale (1,960)

Condition: excellent (used), CATALOG NUMBER 7587 Technical data: - Shaft width: 410 mm - Number of knives: 3 pcs - Brake - Table length: 2540 mm - Cast iron tables - Both tables adjustable - Original cast iron fence, angle-adjustable - Motor: 3 kW - Dimensions (L/W/H): 2540x1000x1050 mm - Weight: 730 kg Advantages: – Made in Poland – 3-knife shaft Fgodpfev Nhgxsx Ab Tsk – Used jointer – Very good condition Net price: 7,900 PLN Net price: 1,880 EUR Net price calculated according to exchange rate 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), Mahr Mahr MarSurf CD 120 / CT120 Complete System For sale is a professional contour and surface measuring system from Mahr, consisting of several devices, accessories, calibration standards, and extensive training documentation. This is a high-quality laboratory or quality measurement system for precise analysis of surface geometry, contours, and measurement parameters. Main unit: Mahr MarSurf CD 120 (Contour Measuring System) CNC contour measuring instrument with vertical axis system Precision measuring module with stylus holder Granite measuring plate with guides Suitable for contour measurements on technical components Typical measuring ranges: Vertical (Z-axis): approx. 60–120 mm (model-dependent) Horizontal (X-axis): approx. 100–120 mm Extremely high accuracy due to granite base and backlash-free guides Control units: Mahr MidRange / MidRange CNC (Type MCP-22 / MCP-23) Control and operating unit for the axes Interface for measurement software (MarWin / MarSurf XC) Mahr ST 500 External control or sensor module (often for special probes) Software and Documentation Status MarSurf XC2 V. 3.01–03.4 MarSurf XC20 V. 5.00–10.1 MarWin v13.20-07 Operation manuals, training folders, training documents Measuring examples, diagrams, technical instructions This software is designed for evaluating contours, profiles, and surface parameters. Accessories / Measuring and Calibration Parts Stylus and probe arm sets Precision styluses of various shapes and lengths Replacement needles and mounting tools Stylus holder with protective case Calibration and reference pieces Mahr Contour 2 Block with reference sphere Calibration and parameter data For PCV, CD 120, LD 120 CDs and data carriers with parameters and software Transport and protective cases Several original cases with foam inserts Calibration seal/inspection sticker visible (valid until 2026) Typical voltage data for the Mahr MarSurf / MidRange / CT series MarSurf CD 120 (Contour measuring unit / axis drive) Supplied via control unit Internal usually: 24 V DC External power supply via MidRange control unit Mahr MidRange control unit (MCP-21 / MCP-22 / MCP-23) This device is the central power supply unit. Typical values: Primary: 230 V AC / 50-60 Hz Secondary: 24 V DC (regulated) Power consumption: approx. 40–80 W Mahr ST 500 Fjdpjx A Ur Rofx Ab Togk Also connected to the MidRange system Powered by 24 V DC CT120 / Probe systems Sensors operate at low voltage 5–24 V DC Supplied by the main unit (no separate power supply) Accessories, manual control units, interface boxes Usually 5 V or 24 V DC, depending on module Weight: approx. 65–73 kg Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (see photo) (Subject to change and errors in the technical data and specifications!) Further questions can be answered by phone.

Condition: excellent (used), For sale: a complete, professional magnetic particle testing (MT/NDT) kit from the renowned brands Tiede and Blak-Ray, used in industrial quality control, welding, rail transport, and the energy sector. The equipment is fully operational and in very good technical and visual condition—ready for immediate use. The set includes: • Tiede FSM-2 – magnetic field strength meter (Feldstärkemessgerät), measuring range ±400 A/cm, 9 V DC power supply • Blak-Ray J-221 – professional long wave ultraviolet meter for UV lamp verification in NDT applications • Field Indicator MAGNAFLUX – magnetic field indicator for quick induction checks • Measurement probe with cable • Calibration specimen and auxiliary accessories • Glass cylinder for indicator fluid • Original transport case with protective foam Fedpfx Asxl Dbtsb Togk Applications: • Weld seam inspection • Shaft, axle, and machine component examination • Testing of railway, energy, and aviation parts • Quality control in industrial production

Condition: good (used), functionality: fully functional, SIMI Shelving Press 300x130 cm Fodpfx Ajx Ezr Ejb Tsgk Specification: • condition – used, serviced and fitted with new seals • manufacturer – SIMI • shelves dimensions: 300 x 130 cm • max clearance between shelves: 460 mm • shelves are straight, clean, without dents or damage • 6 pistons, each 80 mm diameter • new seals on all pistons • pump motor: 1.5 kW • max pressure: 400 bar • automatic pressure compensation in case of pressure drop • glueing cycle timer • shelves prepared for water heating from central heating (top shelf is leaking) • original paintwork • weight approx. 4500 kg • overall dimensions: 380 x 155 x 225 cm (L x W x H) Additional information: • perfect, factory technical condition • displayed photos show the actual condition of the item for sale • possibility to switch on and test the device on site

Condition: new, with compressed air cleaning and frequency inverter Start-up with frequency inverter Pressure transmitter for demand-based control Pre-separator integrated Extinguishing system integrated Efficient and economical: Large-volume compressed air tank with fast-acting diaphragm valves for effective OPTI JET filter cleaning and minimal compressed air consumption. Simple yet effective: OPTI JET cleaning and bag filters with snap ring closure. Extremely efficient: Energy-efficient IE3-class drives. Safe in case of emergency: Service-friendly extinguishing system. Exceptionally quiet: sound-insulated air recirculation from AL-KO. All options available: PLC control for manual and automatic operation. Fgjdpfx Abswzyh Rj Tjk Countless options, such as machine recognition, damper control, and frequency-controlled operation, to name just a few. No mess: Collection container with inspection viewing window. Practical down to the last detail: Container locking with ergonomically shaped clamping lever. Easy retrofitting: Can be converted for discharge via briquette press or rotary valve. - high extraction capacity - minimal space requirement - 100% air recirculation without temperature loss - (residual dust < 0.1 mg/m³) - integrated pre-separator and expandable control system - optimal filter cleaning - minimal noise level - optional: patented fill level monitoring - service-friendly, certified fire extinguishing system - dust barrier for dust-free container change - (optional: safety interlock for containers) - modules freely configurable and expandable ----- Technical Data ----- Extraction nozzle Ø: 355 mm Nominal air flow: 7,127 m³/h Max. air flow: 10,000 m³/h Max. negative pressure: 3,347 Pa Filter area: 73 m² Chip collection volume: 3 x 250 liters Number of bags: 3 pcs Motor 400 V: 15.0 kW Dimensions (LxWxH): 3,320 x 1,058 x 2,361 mm Sound pressure level: 73 dB(A) Weight: 1,064 kg according to: GS - HO - 07

Condition: used, functionality: fully functional, For sale: UNI-TROL vulcanisation equipment set: - JANKA KK automatic tyre changer Technical parameters: External rim clamping: 10" - 26" Maximum wheel width: 15" Maximum wheel diameter: 1070 mm Bead breaker cylinder force: 2800 kg Operating compressed air pressure: 8 - 10 bar Turntable rotation speed: 7 rpm Electrical supply: 3 x 400V / 50 Hz Fsdpfx Aox Eyipob Togk Motor power: 0.75 kW (1.1 kW in 2-speed version) Machine weight: 370 kg Wheel chuck: Pneumatic - TROLL 2112 S wheel balancer Technical parameters: Balancing wheel diameter: 10-24" Balancing wheel width: from 2-10 Accuracy: 1g Max. weight of balanced wheel: up to 60 kg Electrical supply: 230V/50Hz Pneumatic supply: 0.6-1.0 MPa Weight: 100 kg Equipment is fully functional, ready for immediate operation. Negotiation possible. Can be sold as a set or individually. Price in case of individual sale – negotiable. Viewing on site possible.

Condition: excellent (used), CATALOG NUMBER 6679 TECHNICAL DATA - Maximum workpiece width: 250 mm - Maximum workpiece height: 170 mm 6 spindles: 1) Lower horizontal 250 mm 5.5 kW 2) Right vertical 170 mm 5.5 kW 3) Left vertical 170 mm 5.5 kW 4) Upper horizontal 250 mm 7.5 kW 5) Lower horizontal 250 mm 7.5 kW 6) Universal 250 mm, 360° adjustable, 5.5 kW - 6th spindle electrically adjustable up/down - All spindles adjustable up/down, right/left - Spindle diameter: 40 mm - Top: 6 powered, toothed, infeed rollers including 2 double rollers Fgedpfx Aelrvhyob Tjk - Top: 6 powered, rubber, smooth, outfeed rollers including 2 double rollers - Top: 2 hold-downs - Bottom: 1 powered, toothed, swivelling infeed roller before the first spindle - Bottom: 2 powered, metal, smooth outfeed rollers - Bottom: 4 lateral pressure rollers - Feed drive using Cardan shafts - Pneumatic pressure rollers - Infinitely variable feed speed via inverter: 6–30 m/min - Feed motor: 4 kW - Working pressure: 8–10 bar - Electric thickness adjustment - Lifting motor: 1.1 kW - Central table lubrication - Infeed table length: 2180 mm - Extraction port diameter: 6 x 150 mm - Dimensions (L/W/H): 5000 x 1800 x 1900 mm - Weight: approx. 4600 kg ADVANTAGES – Italian manufacture – 6-head configuration – Full DTR technical documentation + CE certification – Ideal for both wet and dry wood – Universal spindle – Excellent condition / as new Net price: 134,900 PLN Net price: 32,100 EUR Net price calculated at 4.2 PLN/EUR (price may vary in case of significant exchange rate fluctuations)

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, machine/vehicle number: S2930815010072, travel distance X-axis: 450 mm, travel distance Y-axis: 670 mm, travel distance Z-axis: 665 mm, controller manufacturer: HEIDENHAIN, controller model: TNC7, spindle speed (max.): 12,000 rpm, operating hours of spindle: 349 h, coolant supply: 40 bar, number of slots in tool magazine: 117, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Highlights: - Automation PSS-T300 - 117 tools in the magazine - IKZ 40 bar _____ Basic machine G150 Travel path of the X-axis 450 mm Travel path of the Y'-axis 670 mm Travel path of the Z-axis 665 mm Power supply system 400 V, 50 Hz, TN-S Compressed air system, with pressure booster, operating pressure 5 and 9 bar, pressure vessel volume 10 l Work area door, automatic, for manual and automatic loading/unloading Decentralized work area mist collector: 800 m³, filter class ISO ePM1 80% Machine cooling system GCU (24 kW) with air-cooled cooling unit Modified door at machine column in case of integration of an automation system Machine control system HEIDENHAIN TNC7 with GROB⁴Pilot generation 2 Swivel axis calibration GSC Advanced Interface for connection of an automation system - standard interface version 1.7 (GROB) Control panel to enter tool data at tool loading and unloading position (HEIDENHAIN) Collision monitoring DCM Collision, version 1 (HEIDENHAIN) Rotary table with EROWA MTS pallet clamping system (B-axis) Fgsdpfx Abox Ex Rxj Tok Motorized spindle HSK-A 63, 12,000 rpm, 64/83 Nm, 40/52 kW GROB spindle diagnostics GSD Triple disk-type tool magazine HSK-A 63 with 117 tool pockets Tool cleaning device Electromechanical tool breakage detection device Laser measurement system LaserControl NT LC50-DIGILOG for milling tools, BLUM-NOVOTEST Pallet storage tower system PSS-T300, basic module Host computer software PROCAM EMS light 10x EROWA pallet, MTS 320 x 320 x 48 mm / STM 160, Tslots 3x Pallet ITS ø148 G (EROWA) 3x EROWA pallet ø 148 P for part clamp EROWA adapter pallet MTS - ITS (STM160) High-pressure cutting fluid system (10-40 bar, ICS) Compressed air feed through spindle center External compressed air supply via a flexibly adjustable hose Changeable cutting fluid pressure increase for the motorspindle nozzles Cutting fluid recirculation on weekends Oil skimmer for cutting fluid care Air gun at the work area Flushing unit for the base of the work area Flushing unit (Z-axis) Part clamping system in work area, customer-specific - Compressed air, manual pressure regulation, 0.5-5 bar (P8.1) - Compressed air, manual pressure regulation, 0.5-5 bar (P1.1) Machine status light, 3-colored Machine accuracy package 1 Radio touch probe RMP400 (RENISHAW) 12-month warranty

Condition: excellent (used), For sale: Professional measuring set from the Japanese company Mitutoyo, model SBM-25CXST (cat. no. 568-925). This set is designed for precision measurement of hole diameters and cylindrical parts in the range from 12 to 25 mm. Set contents: Mitutoyo ABSOLUTE Digimatic digital bore gauge with LCD display; Three measuring heads: 12–16 mm, 16–20 mm, 20–25 mm; Setting rings: Mitutoyo 19.997 mm and HK66 19.001 mm; Extension rods and additional accessories; Original Mitutoyo wooden case with custom foam insert. The ABSOLUTE system ensures stable measurements and no need for re-zeroing every time the device is switched on. Digital readout provides quick and reliable measurements with high accuracy. The set is in very good condition, complete and ready for use. Ideal for measurement laboratories, quality control, and tool workshops. Fgodpfow R E Hvox Ab Tek

Condition: new, Year of construction: 2025, functionality: fully functional, type of input current: AC, total length: 1,600 mm, total height: 1,600 mm, total width: 1,600 mm, input voltage: 230 V, overall weight: 150 kg, Equipment: rotational speed infinitely variable, type plate available, Automatic packaging machine with 3 feeders. The packaging machine works in fully automatic mode. It packs a given amount of product into plastic bags, which are made of plastic tape. In a simple way, through control from the user panel, we set the given amount of products to be packed into the bag. Drums, feeders are prepared for the details that we want to pack - depending on the weight of the item, length, appearance, the feeders are adjusted individually. It is possible to order additional inserts for the feeding drums in order to retool the machine for other details that we want to pack. Depending on the needs, we can configure any appearance of the table on which the feeders are located. The machine is prepared for making bags from plastic tape with a maximum width of 320 mm. It only requires power supply with electricity and compressed air. It has a fully Polish menu and meets CE requirements. It is made on renowned components from world-class manufacturers. Product parameters - Closing the cycle in automatic mode, based on the given quantities. -Adjustable length of the formed bag in the range of 60 - 180 mm. -Possibility of modifying the software in order to create one set of bags that are connected into a whole, but are separated by a weld, when the delivery requires it or the assembly instructions are written so. Such modifications must be determined at the design stage of the machine. -Additional options for equipping the table -Additional forming funnels for other tape widths, e.g. 120, 180, 220, 260, 320 or any specified by the customer. In the case of forming a bag, its width is half the width of the tape, minus 10-15 mm. -Possibility of ordering Tefloned vertical and horizontal sealing jaws, in order to use LPDE film. -A support supporting a heavy bag, which is held on a base during filling, then it is pushed onto the belt conveyor. - A conveyor belt to transport finished bags, e.g. to collective cartons or boxes. Fgjdpfx Abjvrrbxj Tok - A printer designed to print on the bag - various information or signs can be placed there depending on the needs - including a barcode, QR code, catalog number or product description. - A checkweigher checking the final packed bag - in the event of incorrect packing, such a bag is rejected for re-verification. - An automatic machine with a container speeds up the process of picking and packaging products. The packaging machine works in automatic mode - this allows for efficient improvement of the quality and speed of packing various parts into collective packaging, while optimizing the packaging time and reducing the human factor to a minimum, which is needed to add products to containers that count the correct amount of detail. In case of additional questions, please contact our company.

Condition: new, with compressed air cleaning and frequency converter Startup with frequency converter, Pressure transmitter for demand-based control Pre-separator integrated, Automatic fire extinguishing system integrated Efficient and economical: Large-capacity compressed air tank with fast-acting diaphragm valves for effective Fgodjxpximspfx Ab Tjk OPTI JET filter cleaning and minimal compressed air consumption. So simple and so effective: OPTI JET cleaning and filter bags with snap ring closure. Exceptionally economical: energy-efficient drives according to IE3 Safe in case of emergency: maintenance-friendly fire extinguishing system. Extremely quiet operation: sound-insulated air recirculation from AL-KO. All options available: PLC control for manual and automatic modes. Countless options from machine recognition to gate actuation to frequency-controlled operation, to name just three examples. Nothing left to chance: collection container with inspection window. Practical in every detail: container fastening with ergonomically shaped clamping lever. Expandable at any time: retrofit for discharge via briquetting press or rotary valve possible. - High extraction performance - Compact footprint - 100% air recirculation without temperature loss - (Residual dust < 0.1 mg/m³) - Integrated pre-separator and expandable control system - Optimal filter cleaning - Minimal noise level - Optional: patented fill level monitoring - Maintenance-friendly, certified automatic fire extinguishing system - Dust barrier for dust-free bin changes - (Optional: safety locking system for the containers) - Freely configurable module exchange and expandable ----- Technical Data ----- Extraction nozzle diameter: 350 mm, Nominal air flow rate: 6,927 m³/h, Maximum air flow rate: 8,500 m³/h, Maximum negative pressure: 2,543 Pa, Filter surface: 73 m², Chip collection volume: 3 x 250 liters, Number of bags: 3, Motor 400 V: 11.0 kW, Dimensions (LxWxH): 3,340 x 1,058 x 2,351 mm, Sound pressure level: 71 dB(A), Weight: 999 kg, according to: GS - HO - 07

Condition: used, Three-phase power meter, current, voltage and power measurement, long-term recording, energy metering 3-phase power measuring device, ammeter, voltmeter, digital multimeter, active power, apparent power, reactive power BEHA Type UNITEST Power Analyzer 93555 For measuring voltage, current, active power, apparent power, reactive power, power factor, phase angle, frequency measurement, rotation field detection, energy measurement, harmonic analysis Display: LC multifunction display with backlight Refresh rate: approx. 2 sec. Data logger: 512 kB non-volatile memory (max. 21,000 readings, max. 10 measurement series) Sampling rate: 5 s, 30 s, 1 min, 2 min (adjustable) Data transfer: via optically isolated RS232 interface Manual reading memory: max. 99 readings Overvoltage category: CAT III 600 V Power supply: 8 x 1.5 V batteries (AA) or plug-in power supply 230VAC / 12VDC (batteries not included) Voltage measurement: 3 input channels with common reference point "N" Measurement range: 0–600 V rms Display range: 0–999.9 V rms Resolution: 0.1 V Mains frequency: 50 Hz Current measurement: Input range I1, I2, I3: 3–999.9 A Input I4: 3–250 A Display range: 0–999.9 A Resolution: 0.1 A Clamp opening: 40 mm Active power: Option to display the active power of a single input or the total value Display range: 0–999.9 kW Resolution: 0.1 kW Apparent power: calculated from the RMS values of voltage and current Display range: 0–999.9 kVA Resolution: 0.1 kVA Frequency measurement: Range: 45–80 Hz Resolution: 0.1 Hz Accessories: - Carrying case - User manual - 4 current clamps - 4 measuring leads with crocodile clips - RS232 adapter cable - Plug-in power supply 230VAC / 12VDC Overall dimensions (W x H x D): 370 x 270 x 170 mm Total weight: kg Fgjdpfx Ajx A Imzob Tok Device tested, fully functional. The housings of 2 current clamps are damaged and the battery compartment is slightly oxidised, see pictures.

Condition: new, Catalog number: O222 ADVANTAGES – grinding length 2600mm – electric table height adjustment – new machine – warranty – CE certificate TECHNICAL DATA table size 2600x800mm table lift 570mm Fedpfx Asvw Rnnsb Tjgk pulley 250mm electric table height adjustment 0.37kW belt speed 18m/sec sanding belt size 120 x 150mm belt length 7050mm engine 3kW exhaust port diameter 120mm weight 400kg PRODUCT FEATURES The Optimat SD 260 long belt sander has been designed for processing smaller and medium-sized elements. The electrically controlled table certainly increases the precision and efficiency of work. Standard equipment: Electric table height adjustment Extraction nozzle User manual Automatic engine braking Protections compliant with standards Ergonomic emergency switch Electronic table stops Net price: PLN 21,000 Net price: EUR 5,000 Net price calculated according to the exchange rate of PLN 4.2/EUR (in case of larger exchange rate fluctuations, the price may change)

Condition: excellent (used), Product Information "POLY-PTX 800 satin finishing machine" From the inventor of the longitudinal sander. Our multifunctional longitudinal sander with 1750 watts of power, speed control, ergonomic design and versatility - including up to 150 mm working width. High torque and power reserves guarantee professional, continuous use and greater profitability. Features: Infinitely variable speed control from 1000 to 3800 min-1 with a tachogenerator to ensure constant speed even under load. Grinds from coarse to fine. Balanced, simple manual guidance without support rollers. This allows free movement (oscillation effect). Guarantees shadow-free, seamless, highly decorative surfaces in satin, matte and industrial finishes. It satin polishes to a mirror shine and refines the surfaces of stainless steel, steel, non-ferrous metals such as brass, bronze, copper, aluminum, as well as wood. Finest sanding on large surfaces, without shadows or edges. Removes welds, deep scratches, rust, dirt, layers of paint and oxides. Goes from coarse grinding to mirror shine on stainless steel and non-ferrous metals in just three steps. It's also ideal as a round tube grinder using a sanding belt roll. Grinds and polishes open and closed pipe structures. For pipe processing, the "hole system" allows safe and fast bonding of fleece and felt tapes to closed pipe structures. It does not require complex tape bonding. Huge range of grinding tools , which offers a solution for every task. With rubberized handle for optimal handling! Set contents: 1 POLY-PTX® 800 basic unit 1 robust, impact-resistant plastic carrying case 1 QUICK-LOCK cable 4 m 1 POLY-PTX® mounting screw Fgjdpfx Asu Su Tzeb Tok 1 fleece disc 100 mm wide Machine type: Satin finishing machine Cable/battery: Cable Suitable tools: Brushes, bushings, polishing rings, wheels Plug type/power connection: EU (C+F) 220-240 V ~ 50-60 Hz Power consumption: 1750 watts Max tool size: Diameter 115 x width 100 mm Tool holder: 19mm spline shaft WEEE Reg. No.: DE 51395731 Speed in min-1: 1000 - 3800

Condition: excellent (used), CATALOG NUMBER 7037 TECHNICAL DATA - Workpiece length: 2780 mm - Workpiece width: 800 mm - Main motor: 4 kW - Sanding belt width: 150 mm - Fan - Forward/reverse rotation - Electrical table height adjustment (up/down) - Extraction port diameter: 140 mm - Overall dimensions (L/W/H): 3760x1440x1520 mm - Weight: 502 kg ADVANTAGES – Not repainted Fgsdpfx Asmiicdob Tok – With fan – Electric table adjustment – Used sander, very good condition Net price: 9500 PLN Net price: 2260 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of significant currency fluctuations, the price may change)

Condition: excellent (used), For sale: Professional setting device for internal micrometers SUBITO – Schwenk ESU. Very good condition, complete set in original wooden case with manual. • Model: SUBITO Einstellgerät ESU • Manufacturer: Oskar Schwenk GmbH, Germany • Complete equipment • Stable cast iron base • Precise adjustment and micrometric feed • Ideal for setting SUBITO, ESS, ESU internal micrometers • The whole set is in as-new condition Fgodpox A Ia Ijfx Ab Tek

Condition: excellent (used), CATALOG NUMBER 6929 TECHNICAL DATA - Workpiece length: 2800 mm - Workpiece width: 950 mm - Main motor: 5.5 kW Fgedpfxok T A Hwe Ab Tjk - Fan motor: 2.2 kW - Sanding belt width: 160 mm - Extraction port diameter: 185 mm - Right/left rotation - Overall dimensions (L/W/H): 4080x1800x1400 mm - Weight: approx. 1000 kg ADVANTAGES – Not repainted – German manufacture – DTR technical documentation – Used sander, very good condition Net price: 8,900 PLN Net price: 2,120 EUR Net price calculated at the exchange rate of 4.2 PLN/EUR (The price may change in case of larger exchange rate fluctuations)

Condition: new, CATALOGUE NUMBER HZ017 PRODUCT FEATURES As standard, they have mobile containers for sawdust, equipped with a pressure system that allows for tight connection of the container with the machine structure. Thanks to this, it is possible to achieve high negative pressures, without losses at individual connection points. Contaminants from the filter fall directly into hermetic containers with the possibility of quick unloading, which have a special suspension system and mobile wheels that allow for easy and quick transport and maneuvering. The 5.5 kW / 6500 m3/h negative pressure fan, at 2 800 Pa, operates on the principle of a turbine, and the soundproofed design of the fan allows for a significant reduction in the noise emitted during operation. The certified control cabinet allows for constant monitoring of the correctness of operation, thanks to the possibility of any location far from the machine. Standard with integrated fan control system and filter cloth cleaning system ADVANTAGES - new machine - CE certificate - high efficiency - professional Scope of delivery: Polyester filter, 5 microns 2 Containers Drive system Filter cleaning using a vibration system with control TECHNICAL DATA extraction efficiency approx. 8900m3/h engine power 7.5kW rotational speed 3000 rpm voltage 400V, 50Hz extraction nozzle 300mm filter surface 20m2 extraction speed 28m/sec number of filters 45 negative pressure 2800 Pa filter category G filter material polyester dimensions length / width / height 921x2342x2304mm Fgsdpfxjdgud Ao Ab Tsk weight 500kg Net price: PLN 18,500 Net price: EUR 4,400 Net price calculated according to the exchange rate of PLN 4.2/EUR (in case of larger exchange rate fluctuations the price may change)

Condition: excellent (used), CATALOG NUMBER 7186 TECHNICAL DATA - Max. planing width: 510 mm - Max. planing height, double-sided: 170 mm - Max. planing height, four-sided: 100 mm *Top section: - Infeed roller, toothed - Kickback fingers - Feed roller, toothed - Pressure bar - Planing shaft 510 mm, 4-knife (equipped with 2 knives) 4 kW - Outfeed roller, smooth *Bottom section: - Guide rail - Sliding roller – adjustable table with up/down roller - Planing shaft 510 mm, 2-knife 4 kW - 2 smooth, sliding, adjustable rollers *Rear section: - 2 side spindles + pressure unit - 1) right vertical 100 mm 2.35 kW - 2) left vertical 100 mm 2.35 kW - Spindle diameter: 35 mm - Spindles adjustable up/down, right/left - Manual thickness adjustment - 4 feed speed options - Feed motor 1.5 kW - Overall dimensions (L/W/H): 1940 x 1320 x 1140 mm - Weight: 1330 kg ADVANTAGES – Ideal for processing beams, flooring, etc. – Manufactured by the German brand KUPFERMUHLE – Used planer, very good condition Net price: 32,900 PLN Fsdjqcvc Ijpfx Ab Togk Net price: 7,830 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), CATALOG NUMBER 6933 TECHNICAL DETAILS Fgsdpfx Ajk Uxwwsb Tsk - loading areas: 1 - front: manually adjustable clamping beams, 6 pcs - top: pneumatic pressing beams, 4 pcs - length of each pressing beam: 795mm - side: pneumatic clamps, 2 pcs - max length of glued components: 3300mm - max height of glued components: 1300mm - max thickness of glued components: 170mm - dimensions (L/W/H): 4200x800x1960mm - weight: 820kg ADVANTAGES – manufactured in Poland – mobile – unpainted – used press, very good condition Net price: 23,900 PLN Net price: 5,690 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (in the case of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), CATALOG NUMBER 7590 Technical specifications: - Shaft width: 500 mm - 3-knife shaft - Shaft guard - Table length: 2360 mm - Cast iron tables - Both tables adjustable - Cast iron fence adjustable at an angle - Motor approx. 3 kW Fgjdpfxov Nhpmj Ab Tok - Dimensions (L/W/H): 2360x1000x1000 mm - Weight: 630 kg Advantages: – Italian production – Used jointer – Intended for professional use Net price: 6900 PLN Net price: 1640 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), CATALOG NUMBER 6935 TECHNICAL DATA - Shaft width: 630mm - Number of knives: 4 pcs - Max. thickness of workpiece: 210mm * Top section: - Anti-kickback fingers - Serrated feed roller, driven - Pressure bars - Planing shaft - Pressure bars - Smooth outfeed roller, driven * Bottom section: - Adjustable rollers on the lower table: 2 pcs - Motor: 4.4kW - 2 feed speeds - Dimensions (L/W/H): 1220x950x1060mm Fgodpfjk Uyiajx Ab Tek - Weight: 750kg ADVANTAGES – Made in Germany – Used thickness planer, very good condition Net price: 16,900 PLN Net price: 4,020 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (price may vary in case of significant currency fluctuations)

Condition: excellent (used), CATALOGUE NUMBER: 6507 TECHNICAL DATA SURFACE PLANER: - shaft width: 510mm - rollers in the bottom table - original cast iron tilting fence - table length: 1810mm - both tables adjustable THICKNESSER: - max thickness of workpiece on thicknesser: 200mm - cutterhead guard on the thicknesser from above: - pawls Fgsdpfx Abshv Shzo Tsk - geared infeed roller - pressure bar - planer cutterblock - pressure bar - smooth outfeed roller from below: - 2 adjustable rollers in the bottom table - 2 feed speeds - main motor: 2.95kW - dimensions (LxWxH): 1940x1200x1120mm - weight: 970kg Net price: 13,900 PLN Net price: 3,300 EUR Net price calculated at 4.2 PLN/EUR (in case of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), Year of construction: 2007, FOD BYDGOSZCZ Shaft Multi-Rip Saw* DPPD III 50E 530/150 Catalogue number: 7405 TECHNICAL DATA - Maximum cutting height: 150 mm - Maximum element width: 700 mm - Working width of arbor with saw blades: 530 mm - Maximum blade diameter: 450 mm (currently fitted: 350 mm) Fgedpfx Ajt Ht Hhsb Tek - Blade bore diameter: 90 mm From above: - Kickback pawls - 2 toothed feed rollers From below: - 2 smooth feed rollers - Arbor with saw blades - Smooth feed roller - 4 feed speed options - Feed motor approx. 2 kW - Main motor 30 kW - Machine dimensions (L/W/H): 2400x1700x1900 mm - Weight approx. 3000 kg – Made in Poland – Used machine, condition: very good Net price: 38,900 PLN Net price: 9,260 EUR (calculated at an exchange rate of 4.2 EUR) (Prices may change in case of substantial exchange rate fluctuations) * MAR-MASZ guarantees the quality of your purchase, but is not an authorized representative of the manufacturer. All trademarks and trade names are used solely for informational purposes to facilitate identification of the product. We only resell items that were previously put on the market by the manufacturer. We do not have any business relations with the manufacturer.

Condition: excellent (used), Year of construction: 2010, CATALOGUE NUMBER: 6591 TECHNICAL DATA - Maximum cutting height: 250 mm - Track width: 450 mm - Shaft width: 450 mm - Blade bore diameter: 80 mm - Shaft diameter: 60 mm - Minimum blade diameter: 300 mm - Maximum blade diameter: 400 mm - Maximum infeed material width: 860 mm - Minimum workpiece length: 1,500 mm * From above: - Kickback devices - 2 pneumatically pressed, metal, toothed feed rollers - Kickback devices - Pneumatically pressed, metal, toothed feed roller - Pressure unit - Saw shaft - Pressure unit - 2 pneumatically pressed, metal, toothed feed rollers * From below: - Metal idler roller - Guide - Kickback devices - Track - Saw shaft - Track - Stepless feed speed adjustment via inverter: 4–40 m/min - Main motors: 2 × 75 kW - Feed motor: approx. 3 kW - Electric body lift (up/down): 0.55 kW - Electric adjustment of saw shafts: 2 × 0.18 kW - Centralized lubrication - Extraction connector diameter: 2 × 300 mm - Dimensions (L × W × H): 3,400 × 2,650 × 2,200 mm Fodpfelrvgiex Ab Tjgk - Weight: approx. 7,500 kg ADVANTAGES – Czech manufacture – Double-shaft – DTR technical documentation – Used multi-blade saw, very good condition Net price: 275,900 PLN Net price: 65,690 EUR Net price based on exchange rate 4.2 PLN/EUR (price subject to change in case of significant exchange rate fluctuations)