Used Carriage for sale (2,560)

Condition: used, mileage: 4,212 km, Year of construction: 2023, operating hours: 1,469 h, Drivetrain Drive: Wheel Weights Empty weight: 68.820 kg Functional Lifting capacity: 250.000 kg Identification Serial number: 52509646 Other information Front tyres / undercarriage remaining: 90 Rear tyres remaining : 90 Kdsdpfxjxp Akbe Afisu Tyre brand: - Carrier engine: - Upper engine: - Counterweight: 80000 Transport dimensions (LxWxH): 15.64x2.75x3.99 Additional information Please contact PFEIFER GROUP for more information

Condition: good (used), power: 110 kW (149.56 HP), fuel type: diesel, color: yellow, Year of construction: 2014, operating hours: 9,448 h, Technical information Chassis type: rigid Empty weight: 15.517 kg Make of engine: C6.6 Top speed: 10 km/h Functional Bucket capacity: 1,85 m³ CE mark: yes Condition Technical condition: good Visual appearance: good Identification Serial number: CAT0953DTLBP01774 Kdodpsxp Aiksfx Afisu Other information Undercarriage condition: 95 Output of the auxiliary hydraulics: 140 l/min Emission level: Stage IIIA / Tier III Delivery terms: EXW Transport dimensions (LxWxH): 6,252x2,28x3,105 Production country: FR Additional information Please contact Antoon Schroder, Dennis van Loon or Jeroen Rijk for more information

Condition: new, Year of construction: 2025, For customers only from the Baltic countries: Lithuania, Latvia, Estonia. The CIDAN RAPIDO guillotine is a fast and reliable metal cutting machine. Depending on the length of the processed metal, guillotines of different working lengths are offered: 1300 mm / 2600 mm / 3200 mm / 4100 mm. Cutting thickness: 3.5 - 1.5 mm. The guillotine can perform up to 35 cuts per minute. The drive system with eccentrics, the lowering bars for holding the cut sheet and the system that presses the material during cutting are installed only 2.5 cm from the knives, which allows you to easily, quickly and conveniently cut narrow strips. RAPIDO guillotine shears have corner supports on both sides of the table, ensuring that the material is fed into the machine at a right angle, and LED cutting zone lighting, thanks to which you will clearly see the cutting line. Backrest and control system CUTLINK CUTLINK is a fast, reliable and easy-to-use program that allows you to simultaneously enter up to 10 different operations. The backrest automatically adjusts itself according to the entered parameters. As standard, the guillotine is equipped with a 750 mm deep backrest, but if necessary, a 1000 mm backrest can be selected as an option. Sheet support and return To achieve maximum control, the back sheet support is pneumatically controlled. This allows you to adjust the sheet feed speed depending on the type of material being processed. After cutting, the sheet support lowers the material into the return carriage (forward return). If necessary, the sheet return function can also be selected as an option. If you have any further questions, we will always be happy to consult you by phone or invite you to inspect the machine live. Kedpfxjwd Ebze Afiedu

Condition: ready for operation (used), - USED - CONVENTIONAL LATHE WITH DIGITAL READOUT SYSTEM CENTRE HEIGHT: 500 mm DISTANCE BETWEEN CENTRES: 6000 mm MAX TURNING DIAMETER OVER BED: 1000 mm MAX TURNING DIAMETER OVER CARRIAGE: 310 mm BAR CAPACITY: 150 mm Kdedpfoqam Azjx Afiju ACCESSORIES: RAPID FEEDS OVER CARRIAGE ; STEADY REST ; PLATEAU

Condition: used, Year of construction: 2018, 5.5 kW main motor, frequency converter (2000-6000 rpm), motorized 2-axis scoring unit with its own drive. Motorized height adjustment in 0.1 mm increments. Motorized angle adjustment in 0.1° increments with digital display. 1090 x 630 mm miter gauge. Narrow and wide extraction hoods with quick-change function. Clamping shoe, sliding block, and manual quick-release clamp. Sliding carriage length 2150 mm (cutting length 2170 mm) - Quick-Scoring equipment packages - Scoring unit adjustable without tools from 2.8 to 3.6 mm - Miter gauge +45° - 45° - On/off switch on the sliding carriage. Kedjvvkm Ujpfx Afijdu Storage location: Nattheim

Condition: excellent (used), CATALOG NUMBER 7644 Technical data: - max. diameter of the main blade with a scorer 350mm - max. diameter of the main blade without a scorer 450mm - cutting height with a 100mm blade installed - hydraulically adjustable main blade up/down + angle - electric angle display - electric adjustment of the scorer up/down, right/left - spindle diameter 30mm - spindle locking - with a format carriage - cutting length on the carriage 2800mm - cutting width at the guide 1440mm - with a side carriage - with a scorer - max. diameter of the scorer 120mm - spindle diameter 22mm - scoring motor 0.75kW - main motor 5.5kW - 4 types of rotation speeds - electronic rotation display - diameter extraction nozzle 120mm, 80mm - table top dimensions 1220x730mm - table top dimensions with extension 1230mm - table top dimensions with extension 2070mm - blade guard - dimensions length/width/height 2940x3400x1420mm Kdodpjwgdh Sjfx Afieu - weight 1100kg ADVANTAGES – German production – with scoring saw – unpainted – used saw, very good condition Net price: PLN 29900 Net price: EUR 7040 Net price calculated according to the exchange rate of PLN 4.25/EUR (in case of greater exchange rate fluctuations the price may change)

Condition: new, - Practical clamping system for panels, for trimming the underside and processing without intermediate storage of cut-offs - Comfortable height adjustment of the clamping jaws via control panel - Smooth and ergonomic operation - Modular welded machine frame, torsion-resistant and self-supporting - Scoring device for tear-free cutting quality - Automatic retraction of slatted frame during sawing - Central workpiece support for maximum flexibility - Easy switching between vertical and horizontal processing - Digital stop gauge - Transport wheels liftable via pedal for easy moving of heavy panels - Durable and precise material support for stable workpiece position - Pneumatic locking of the saw carriage - Large opening for saw blade change Extraction connection: - Extraction nozzle diameter: 100 mm - Extraction air requirement min.: 1800 m³/h - Air speed min.: 20 m/s Equipment: - Lower material support: metal rollers - Retractable slatted frame: automatic - Vertical measurement display: digital - Horizontal measurement display: digital - Panel clamping system - Locking of saw carriage: pneumatic - New exhibition machine - Kodpfx Aownrf Uofijdu

Condition: good (used), power: 90 kW (122.37 HP), fuel type: diesel, color: yellow, Year of construction: 2021, operating hours: 4,881 h, Equipment: air conditioning, Technical information AdBlue system: Yes Make of engine: D4J Top speed: 6 km/h Empty weight: 15.793 kg Functional CE mark: yes Condition Technical condition: good Visual appearance: good Identification Serial number: VCECR145T00315216 Other information Undercarriage condition: 80 Output of the auxiliary hydraulics: 124 l/min Emission level: Stage V / Tier IV final Transport dimensions (LxWxH): 7,4x2,69x3,075 Production country: KR Kdjdjxp Aidepfx Afisu Additional information Please contact Dennis van Loon, Antoon Schroder or Jeroen Rijk for more information

Condition: used, Year of construction: 2008, operating hours: 18,813 h, Type of fuel: Electric Empty weight: 5.771 kg Dimensions (LxBxH): 240 x 120 x 220 cm Lifting capacity: 3.000 kg Lift height: 473 cm Clearance lift height: 147 cm Fork dimensions: 1.050 x 950 mm - Lifting capacity: 3000kg - Lifting height: 4730mm - Overhead clearance: 2200mm - Free lift: 1470mm - Fork length: 1050mm - Maximum fork width: 950mm - Minimum fork width: 0mm - Number of wheels: 4 Wheels - Attachment: 3rd+4th valve to fork carriage - Options: Free-lift, Work lights Kjdpoxpw Ibjfx Afiodu - Mast: Triplex - Inspection valid until: 06.2025 - Drive: Elektric - Battery year of construction: 2018 - Capacity: 775Ah - Battery voltage: 80V - Year: 2008 - Documentation available: No - CE marking present: Yes - Serial number: G1X336W51450 - Operating hours: 18813 - Transport dimensions: 2400mm x 1200mm x 2200mm (l x w x h) - Transport weight [kg]: 5771kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Koen van Lent

Condition: excellent (used), Casadei KS 1200 format saw Kdedpfx Afoqu Sdksisu Length of carriage 1100mm Cutting width on the right side 500mm Cutting height at 250mm saw is 65mm Maximum saw size 300mm Undercutter 80mm Saw tilting at an angle up to 45 Manual raising and lowering of the saw 3kw motor Weight 320kg

Condition: used, Year of construction: 2001, Cutting width: 3300 mm Cutting length: 3350 mm Weight: approx. 4000 kg Saw blade projection: 100-(115) mm Saw carriage: Feed speed: 100-(130) m/min. Return speed: 100-(130) m/min. Main saw blade: 400-(430) mm Motor: 7.5-(11-13.2) kW Scoring unit: 215 mm Motor: 2.2 kW Pusher: Rapid feed: 160 m/min. Return speed: 60 m/min. Extraction: Air speed: 30-35 m/sec. Extraction nozzle: 200 mm / 115 mm Compressed air: Pressure: 5-6 bar Consumption: 20-30 l/min. Kdedpfx Ajvvkqgjfiju Storage location: Nattheim

Condition: new, Catalogue number H0548 - new machine, in stock - CE certificate - cutting length 3200mm - cutting width 1150mm - cutting height 90°/45° - 80/55mm - max. blade diameter 305mm - blade adjustable up/down and at an angle of 45 degrees - scoring blade diameter 120 x 20 mm - main saw speed 4500,5500 rpm - scoring blade speed 8000 rpm - 5.5 kW / 400 V motor - scoring blade motor 1.1 kW kW - carriage guided on steel bars Overall dimensions: - length 3220mm - width 3150mm - height 900 mm Kdedjdpdcvspfx Afisu - weight 700kg - mechanical height adjustment - mechanical tilt adjustment - table extension - table widening - angle cutting fence - main blade and scoring blade included Net price: PLN 20310 Net price: EUR 4840 Net price calculated according to the exchange rate 4.2 PLN/EUR (in case of larger exchange rate fluctuations the price may change)

Condition: new, Rexroth roller carriage MNR:R185363110, unused in opened original packaging, 100% functional, scope of delivery as per photos Ksdpfx Afji Ec Ahjijdu

Condition: good (used), power: 234 kW (318.15 HP), fuel type: diesel, color: yellow, Year of construction: 2019, operating hours: 8,152 h, Equipment: air conditioning, Technical information AdBlue system: Yes Make of engine: C9.3B Kedpfjxp Ah Tsx Afiodu Top speed: 5 km/h Empty weight: 37.400 kg Functional CE mark: yes Condition Technical condition: good Visual appearance: good Identification Serial number: CAT00336LJHD00345 Other information Undercarriage condition: 100 Output of the auxiliary hydraulics: 558 l/min Emission level: Stage V / Tier IV final Transport dimensions (LxWxH): 11,17x3,19x3,47 Production country: JP Additional information Please contact Dennis van Loon, Antoon Schroder or Jeroen Rijk for more information

Condition: used, Year of construction: 2000, total height: 2,200 mm, total length: 3,700 mm, total width: 1,600 mm, Empty weight: 5.000 kg Price: On request - Drive system: CNC - Control system brand: Fanuc - Control system type: 18i-T - Power [kW]: 15.0 - Swing over bed [mm]: 470 - Carriage turning diameter [mm]: 310 - Distance between centres [mm]: 305 - Spindle bore [mm]: 70 - Max. spindle speed [rpm]: 5000 - Options: Live tools, Chip conveyor, Turret - X-axis travel [mm]: 190 - Z-axis travel [mm]: 550 - Tool magazine [pcs.]: 12 - Year: 2000 - Documentation available: Yes - CE marking present: Yes - Serial number: 09095 - Transport dimensions: 3700mm x 1600mm x 2200mm (l x w x h) - Transport weight [kg]: 5000kg - Transport packages [pcs.]: 2 Kdjdpfx Afexpu Rtoieu Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, saw blade diameter: 200 mm, Fully automatic metal circular saw for burr-free cuts and high sawing performance in thin-walled material Manufacturer: Rohbi Series: RKA-86 Control system: Siemens Year of manufacture: 2007 Origin: Switzerland technical data: ----- - High-speed spindle for saw blade 500 - 3,900 rpm (2.0 kW) - Clamping cylinder pneum. 2.000 N - Cutting range round solid material with HSS saw blade: 2-60 mm - Cutting range profiles solid material with HSS saw blade: 60x40 mm - Cutting range round pipe material with HSS saw blade: 2-70 mm - Cutting range profile material with HSS saw blade: 80x40 mm - Material feed carriage max. stroke: 1,250 mm Drive via gear wheel / gear rack - Clamping vice clamping: hydraulic - Minimum quantity lubrication - Saw blade dimensions: 100 - 200 mm (HSS or solid carbide) - Saw blade monitoring via load pick-up - Chip removal via external extraction possible - Material removal via retracting chute - Weight: 900 kg Accessories: Ksdpetxlxuofx Afisdu ----- - Operating instructions - 3x sets of clamping jaws with drawings

Condition: used, Year of construction: 2022, Plus freight 4,000.00 € and installation and commissioning 5,000.00 € Grinding system B Sand 5 with partial lathe Working principle The panel is placed on the infeed table. It goes into the partial lathe and centered. It is ground in the grinding system, through and back. The panel is turned in the partial lathe. It is ground on the other side in the grinding system. Then there are two options: either the panel goes onto the outfeed table and unloaded or it comes back onto the infeed table and is unloaded there (the second option extends the working time). Grinding system equipment 1 upper grinding lamella roller suitable for surfaces. Power 3 kW; D 420 mm; L 1300 mm. Cross brush suitable for grinding the cross fibers. D 420 mm; L 300 mm. Power 1.1 kW. Cross brush suitable for grinding the cross fibers. D 420 mm; L 300 mm. Power 1.1 kW. 3 upper sanding discs for perfectly trimming the longitudinal and transverse wood fibers. Power 1.5 kW each; D 400 mm. Disc brush for beveling edges. The unit functions as a deep brush. After detecting the panel edges, it will follow the door edges. Power 0.75 kW; D 250 mm. Machine features: -The unique sanding system of this machine guarantees perfect wood sanding and/or intermediate sanding of the panels. -All tools are controlled by frequency converters. -All brushes are equipped with quick-release sanding strips without replacing the hub. -The discs are equipped with air bladders to optimize cleaning and service life. -Sanding discs are equipped with a Velcro fastening system. -The feed and rotation speed are PLC-controlled to prevent edge breakage. -High-quality sanding on 4 sides thanks to the system's constant removal rate. -Automatic and rapid unit changeover. - Constant throughput height, PLC and industrial software enable interlinking in a surface line. - Continuously variable speed of the discs, brushes and feed thanks to the fully equipped frequency converter. - Right/left rotation of the discs and brushes with different abrasive grits. - Individually driven feed of the discs, rollers and belts. - Additional adjustment of the brushes and discs to balance the use of the abrasive and to allow for changing the grinding pressure on the surfaces. - Strong support bed made of tubular steel guarantees the best rigidity, stability and flatness. - Planed upper support bed to ensure the best parallelism of the working surface for the grinding discs. - All unit carriages are designed with linear recirculating ball bearing guides, thus high load capacity and high precision. - Motorized feed belt controlled by a frequency converter, 0.55 kW. Machine doors equipped with safety devices. - Machine doors equipped with windows to observe the workpieces during operation. - Under the units, there are 80 mm rubber-coated pressure rollers to hold the workpieces in place during processing. · Low follow-up costs thanks to individual blade replacement. · Low running noise thanks to the enclosed system housing. · All units have suction housings with their respective suction supports. Cover plate with suction nozzle. · Completely encapsulated machine housing for a clean environment. Kjdpfx Afjvvkipeiedu

Condition: excellent (used), Catalogue number 7791 TECHNICAL DATA - Max main blade diameter with scorer: 350mm - Max cutting height: 105mm - Main blade adjustable up/down + angle - Spindle diameter: 30mm - Spindle locking - With sliding table - Cutting length with carriage: 1430mm - Cutting width at the fence: 1000mm Kdodpfx Asxpvk Iofisu - With side table - With scorer - Max scorer diameter: 80mm - Scorer spindle diameter: 20mm - Main motor: 5.5kW - Extraction nozzle diameter: 100mm - Table size: 115x625mm - Table size with extension and widening: 2150x1105mm - Blade guard - 3 rotation speeds: 3200/4500/6000rpm - Dimensions (LxWxH): 2300x3350x1520mm - Weight: 746kg Net price: 11900 PLN Net price: 2800 EUR at an exchange rate of 4.25 EUR (Prices may change with significant fluctuations)

Condition: good (used), power: 130 kW (176.75 HP), fuel type: diesel, color: yellow, Year of construction: 2015, operating hours: 10,671 h, Equipment: air conditioning, Technical information Chassis type: articulated Empty weight: 20.500 kg Make of engine: D934S A6 Top speed: 40 km/h Functional Lifting capacity: 12.000 kg Bucket capacity: 7 m³ CE mark: yes Condition Technical condition: good Visual appearance: good Identification Serial number: VATZ1287CZB039424 Other information Front tyres / undercarriage remaining: 60 Rear tyres remaining : 90 Tyre brand: Bridgestone Output of the auxiliary hydraulics: 234 l/min Emission level: Stage IIIA / Tier III Delivery terms: EXW Ksdpfx Aexprq Defisdu Transport dimensions (LxWxH): 8,38x2,7x3,36 Production country: DE Additional information Please contact Antoon Schroder, Dennis van Loon or Jeroen Rijk for more information

Condition: used, Year of construction: 2020, CNC-CONTROLLED MACHINING CENTER WITH MULTIFUNCTIONAL TABLE - WORK CELL VERSIONX400 CELLDrilling and milling made for you!The numerically controlled machining center is equipped with a wide range of milling/drilling tools to meet every need in the processing of wood and similar materials.- More powerful, with drilling spindles with 8,000 rpm and . Technology, the toughest spindle available on the market, with over 1,000 maintenance-free hours of use. Better and more comprehensively equipped, with various configuration options thanks to the multifunctional table to optimally equip the machine according to your needs. Easier and more understandable programming thanks to the integrated MAESTRO CNC CAD-CAM module. Easier to use: the work table is accessible at all times, the electrical cabinet and vacuum pump are integrated, and in the PRO SPACE configuration there are no guards. Supporting structure. The supporting structure consists of a particularly strong monolithic steel base, heavily ribbed and very rigid. The particularly wide support was specifically designed to give the machine stability, ensuring consistent precision regardless of the working conditions and eliminating the need to anchor the machine to the floor. The base forms a large and solid support for the mobile column: the work unit is thus equipped with a balanced, stable, and durable support that can withstand the most extreme stresses, ensuring higher quality performance and greater precision. The mobile gantry consists of a single, solid unit anchored to the base on both sides and slides on pyrotechnic guides with top-quality ball-return slides. The dual motorization along the X-axis ensures top performance even under demanding working conditions. The movement of the lower moving unit (X-axis) and the working unit along the rod of the moving unit (Y-axis) is achieved thanks to a rack/pinion transmission with helical teeth. this creates a greater tooth-to-tooth thrust which achieves greater acceleration and greater speed along the X and Y axes. The specially designed helical gearing ensures less wear on the mechanical components and less noise. The vertical Z axis is driven by a screw with ball return which ensures perfect balance with dynamic loading and strong acceleration and deceleration. The main milling unit is directly coupled to the Z axis carriage and ensures absolute quality of finishes as any vibrations are completely eliminated. Translation along the X-Y-Z axes is carried out by brushless motors driven by static inverters; These ensure: - Reduced processing times thanks to improved acceleration - Better positioning accuracy thanks to the high-resolution encoder - Zeroing of setup operations when switching on the machine thanks to absolute encoders - Zeroing of general maintenance operations since there are no brushes with the "brushless" system The management of the axis displacement and, in general, of the machine's working elements is carried out by an industrial NS module with digital D Kedsvvi N Iepfx Afiedu

Condition: good (used), power: 216 kW (293.68 HP), fuel type: diesel, color: yellow, Year of construction: 2020, operating hours: 5,801 h, Equipment: air conditioning, Technical information Chassis type: articulated AdBlue system: Yes Make of engine: SAA6D125E-7 Top speed: 38 km/h Kdsdpfsxprqwjx Afiju Empty weight: 25.090 kg Functional Lifting capacity: 20.000 kg CE mark: yes Condition Technical condition: good Visual appearance: good Identification Serial number: KMTWA142VLHH47120 Other information Front tyres / undercarriage remaining: 90 Rear tyres remaining : 90 Tyre brand: Goodyear Output of the auxiliary hydraulics: 306 l/min Emission level: Stage V / Tier V Delivery terms: EXW Transport dimensions (LxWxH): 9,61x2,99x3,48 Production country: JP Additional information Please contact Antoon Schroder, Dennis van Loon or Jeroen Rijk for more information

Condition: used, Year of construction: 1991, Eye-level control panel, Aigner integral stop including feed with sliding carriage (without stop ruler), milling stop with digital display and swivel mechanism Storage location: Nattheim Kdjdpfx Afjv Ai N Ujisu

Condition: used, Year of construction: 2019, Incl. tools CNC-CONTROLLED MACHINING CENTER morbidelli m100 Drilling and milling made for you! This numerically controlled machining center is equipped with a wide range of milling and drilling tools to meet every woodworking requirement. - Highly powerful - with 8,000 rpm drilling spindles and . technology, the most stable spindle available on the market, with more than 1,000 maintenance-free hours of use. - Optimally and comprehensively equipped - the vacuum cleaners can be individually configured with the TV FLEX work table to customize the machine to meet individual requirements. - Easy and understandable programming thanks to the integrated Cad-Cam MAESTRO CNC software - Easy to operate; the lowered machine frame makes the work table accessible at all times. The control cabinet and vacuum pump are integrated into the machine bed, and in the PRO SPACE version, no additional structural protective measures are necessary. Supporting structureThe supporting structure consists of a particularly strong monolithic steel base, ribbed and very robust. The particularly wide support was specifically designed to give the machine stability, ensuring constant precision in all working conditions. The machine does not need to be anchored to the ground. The base provides a large and solid support for the mobile column: the work unit is equipped with a balanced, stable and resistant support that can withstand the most extreme stresses, ensuring superior performance and greater precision. The mobile gantry consists of a solid single part anchored to the base and the work unit is fixed to it and moves along Y and Z axes, also on prismatic guides with ball return sliding blocks of the highest quality. The movement of the lower moving unit (X-axis) and the working unit along the crosshead of the moving unit (Y-axis) is achieved thanks to the power transmission via a rack and pinion with helical teeth; This creates a greater tooth-to-tooth thrust, which achieves greater acceleration and higher speed along the X and Y axes. The specially designed helical gearing ensures less wear on the mechanical components and less noise. The vertical Z axis is driven by a screw with ball return, which ensures perfect balance with dynamic loading and strong acceleration and deceleration. The main milling unit is directly coupled to the Z axis carriage and ensures very high quality finishing as vibrations are completely eliminated. Translation along the X-Y-Z axes is carried out by brushless motors driven by static inverters. These ensure:- Reduced machining times thanks to improved acceleration- Better positioning accuracy thanks to the high resolution encoder- Elimination of setup operations when switching on the machine thanks to absolute encoders- Elimination of general maintenance operations as there are no brushes with the "brushless" systemThe management of the axis displacement and in general of the working elements of the machine is done via e Kdodpfx Asvvi Scofiou

Condition: used, Year of construction: 1995, With scoring saw, sliding carriage, 3300 mm cutting width, 1050 mm motor, 5.5 kW, rear parallel stop manually lowerable, digital displays for tilt, parallel stop, and cutting height with handwheel adjustment of the parallel stop. Kdsdpjwbfyxsfx Afiju Storage location: Nattheim

Condition: used, Year of construction: 2004, Saw unit: pivots 45°. Carriage length: 3200 mm. Maximum saw blade diameter: 450 mm. Saw blade bore: 30 mm. Motor power: 7.5 kW. Max. Cutting width: mm Control panel: at eye level Height adjustment: input via keyboard Tilt adjustment: input via keyboard Tilt angle display: digital Cutting width display: digital Table extension length: yes Cross-cutting at the cross stop: 3200 mm Cross stop display: scale Scoring device adjustment: electric Scoring blade: PSV Protective cover: yes End position lock: yes Automatic motor brake: yes Speeds: 2500/3500/5000 rpm Description: Cutting height at 450 sheets, 150 mm Weight approx.: 1180 kg Dimensions: 3200 x 1800 x 1800 mm Extraction diameter: 1 x 80, 1 x 120 mm Storage location: Nattheim Kdedpswayx Tefx Afieu