Used Carriage for sale (2,057)

Condition: refurbished (used), Year of construction: 1992, turning diameter over cross slide: 800 mm, turning length: 3,100 mm, turning diameter: 550 mm, spindle speed (max.): 350 rpm, travel distance X-axis: 550 mm, travel distance Z-axis: 3,000 mm, Very clean Heid S500 CNC Lathe with closed slide. Diameter 800mm over slide Diameter 550mm over carriage Total turning length capacity 3100mm In 2018, the CNC unit was completely replaced, and a Fagor 3-axis control system was installed. The machine is in working condition and can be seen in operation. Iiedpfx Apezl H Tlsceg

Condition: like new (used), functionality: fully functional, CIRCULAR SAW model CASOLIN ASTRA 400 . carriage mm. 3800 second hand machine in excellent working condiiton CE-compliant machine: YES electric blade lifting electric blade tilt with scoring blade: YES scoring blade with electric movements from control panel independent motors volts 380/50 digital blade tilt display digital blade height display technical details : anodized aluminum carriage: mm.3800 cutting width on the rip fence: mm.1300 maximum panel passage to the right of the blade mm. 2000 max. blade diameter: mm.400 (with scoring blade installed) blade unit tiltable at 45° scoring unit with independent motor: YES Iisdpozygcpjfx Apcjg blade rotation speed: rpm 3200 / 4200 / 5000 saw blade unit: motor power Hp 7,5 scoring unit: motor power Hp 1 machine equipment : aluminum telescopic rod n.2 mechanical stops suspended "bridge" protection on the blade n.2 additional frames (rear and side)

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2018, operating hours: 18,020 h, load capacity: 1,600 kg, lifting height: 4,600 mm, free lift: 1,500 mm, fuel type: gas, mast type: triplex, construction height: 2,150 mm, motor manufacturer: VW, gearing type: hydrostat, fork length: 1,200 mm, tire condition: 60 %, front tire type: superelastic tires (black), front tire size: 18x7-8, rear tire type: superelastic tires (black), rear tire size: 18x7-8, overall weight: 2,950 kg, total height: 2,150 mm, total length: 2,200 mm, total width: 1,100 mm, fuel: liquid petroleum gas (LPG), Equipment: sideshift, LINDE H 16 T / 391 – LPG forklifts TECHNICAL DATA Lifting capacity: 1.600 kg Lifting height: 4.600 mm Closed height: 2.150 mm Free lift: 1.500 mm Mast: Triplex (3F460) Fork length: 1.200 mm Fork carriage: FEM 2A Drive: 4-Zyl. Treibgas Engine: VW Transmission: Hydrostat Tyres: Superelastik 18x7-8 (60 %) / 18x7-8 (60 %) Iiedpfx Aoz Aqnzopcjg Service weight: 2.950 kg Length: 2.200 mm Width: 1.100 mm Year of manufacture: 2018 Operating hours: 18.020 h Condition: ready to drive EQUIPMENT 3rd valve, Rear work lights, Front work lights ATTACHMENTS Sideshift Internal no.: 1201976 Location: 14974 Ludwigsfelde bei Berlin Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Condition: used, functionality: fully functional, load capacity: 5,000 kg, Fork carriage Iisdpfx Asw Erlcopcjg ISO class: ISO class 3 = 2,500 - 4,999 kg Condition: Ready for use and fully functional Technical condition: Very good Description: ISO 3A (51 cm), capacity 5,000 kg, width 1,350 mm. To enlarge the width of the original fork carriage, can also be supplied to increase the lost load centre and as an adapter fork carriage between the forklift truck and other attachments. ID OS1670

Condition: used, Martin t60 panel saw Iiedezzdi Njpfx Apcog carriage: 330 cm, tilt: 0-45 degrees, and motorized adjustment of the blade height, sliding table on the right side, manually adjustable up to 1250 mm with an electronic display, 3-axis scoring saw, electrically adjustable, scoring saw that extends and retracts pneumatically, main motor: 5.5 kW, 3 cutting speeds, max. blade diameter: 400 mm.

Condition: good (used), functionality: fully functional, Subject to differential taxation according to §25a of the German VAT Act. You will receive a regular invoice. Internal article number: 26057 Lathe Weiler Matador + Multifix "A" baseplate + 3-jaw chuck + Collets + Coolant pump Center height approx. 150mm Turning diameter over carriage 160mm Turning diameter over bed approx. 300mm Distance between centers approx. 500mm Spindle bore approx. 36mm Speed range 30 - 3500 rpm Iiodpfx Apjzx R R Ijcsg Automatic longitudinal/cross feeds Tailstock MK3 Dimensions (L x W x H): 150 x 70 x 150cm Weight: 600kg The machine comes from an educational institution and is in good condition. You are welcome to inspect the machine while it is powered on, in our heated storage area of over 500 m².

Condition: used, Year of construction: 2005, operating hours: 20,098 h, Type of fuel: Electric Colour: Grey Empty weight: 8.255 kg Dimensions (LxBxH): 242 x 130 x 239 cm Lifting capacity: 3.000 kg Lift height: 360 cm Fork dimensions: 1.070 x 990 mm - Year: 2005 - Documentation available: Yes Isdpfeyvf E Ajx Apcoig - CE marking present: Yes - CE certificate present: No - Serial number: 516045005907 - Operating hours: 20098 - Lifting capacity: 3000kg - Lifting height: 3600mm - Overhead clearance: 2390mm - Free lift: 0mm - Fork length: 1070mm - Maximum fork width: 990mm - Minimum fork width: 250mm - Number of wheels: 4 Wheels - Attachment: 3rd+4th valve to fork carriage - Options: Radio, Full cabin, Work lights - Mast: Duplex - Drive: Electric - Battery information: - └ Brand/Type: 5 PzS 775 - └ Battery year of construction: 2017 - └ Capacity: 775Ah - └ Battery voltage: 80V - Transport dimensions: 2426mm x 1300mm x 2390mm (l x w x h) - Transport weight [kg]: 8255kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2004, Sliding carriage length: 3000 mm Cutting width at rip fence: 1350 mm Cutting width at crosscut fence: 3200 mm Cutting depth: 170 mm Scoring unit: no Saw blade height adjustment: electric Saw blade tilting adjustment: electric Rip fence adjustment: manual Crosscut fence adjustment: manual Iedpfx Ajyl Tihspceig Saw blade angle display: digital readout Cutting height display: digital readout Rip fence display: digital readout Crosscut ruler display: scale Saw blade diameter: 500 mm Spindle speeds: 4 Motor power: 7.5 kW Extraction port: 80 and 120 mm Machine length: 3600 mm Machine width: 2200 mm Weight: 1200 kg

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2016, operating hours: 14,458 h, load capacity: 2,500 kg, lifting height: 3,270 mm, fuel type: electric, mast type: telescopic, construction height: 2,250 mm, battery capacity: 775 Ah, battery voltage: 80 V, fork length: 1,200 mm, tire condition: 20 %, front tire type: superelastic tires (black), front tire size: 23x9-10, rear tire type: superelastic tires (black), rear tire size: 18x7-8, overall weight: 5,186 kg, total height: 2,250 mm, total length: 2,550 mm, total width: 1,200 mm, fuel: electricity, Equipment: cabin, sideshift, STILL RX 60-25L / 6347 – Electric 4-wheel forklift TECHNICAL DATA Lifting capacity: 2.500 kg Lifting height: 3.270 mm Closed height: 2.250 mm Mast: Standard (2W327) Fork length: 1.200 mm Fork carriage: FEM 2A Drive: Elektro Battery: 80 V/775 Ah (2016) Charger: 80 V/85 A Tyres: Superelastik 23x9-10 (20 %) / 18x7-8 (10%) Service weight: 5.186 kg Length: 2.550 mm Width: 1.200 mm Year of manufacture: 2016 Operating hours: 14.458 h Condition: ready to drive EQUIPMENT 3rd valve, 4th valve, Rear work lights, Front work lights, Heating, Full cabin ATTACHMENTS Sideshift, Fork positioner Iedoz Aptvepfx Apceig Internal no.: 1308844 Location: 14974 Ludwigsfelde bei Berlin Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Condition: used, Year of construction: 2002, operating hours: 16,767 h, lifting height: 4,750 mm, fuel type: electric, mast type: triplex, battery manufacturer: R&W, battery capacity: 775 Ah, battery voltage: 80 V, fork length: 1,200 mm, Weights Empty weight: 5.530 kg Functional Lifting capacity: 3.000 kg Number of valves: 3 CE mark: yes Condition General condition: average Technical condition: average Visual appearance: average Other information Reconditioned: Yes Fork carriage: Sideshifter Additional information Ijdpfxoy Rdn To Apcoig Please contact Bas Sindorf for more information

Condition: ready for operation (used), Year of construction: 2012, spindle bore: 75 mm, spindle speed (max.): 2,400 rpm, rotational speed (max.): 2,400 rpm, quill diameter: 75 mm, Fanuc OITD Capacity: 1750 x 560 mm Diameter: 390 mm on carriage 12-position turret Tool guards Set of VDI tool holders Iedpfx Apszzdtujceig

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2017, operating hours: 5,358 h, load capacity: 1,800 kg, lifting height: 4,900 mm, free lift: 1,490 mm, fuel type: electric, mast type: triplex, construction height: 2,160 mm, battery capacity: 625 Ah, battery voltage: 48 V, tire condition: 70 %, front tire type: superelastic tires (black), front tire size: 18 x 7 - 8, rear tire type: superelastic tires (black), rear tire size: 15 x 4,5 - 8, overall weight: 3,417 kg, total height: 2,160 mm, total length: 2,000 mm, total width: 1,150 mm, fuel: electricity, Equipment: sideshift, STILL RX 20-18 / 6213 – Electric 3-wheel forklift TECHNICAL DATA Lifting capacity: 1.800 kg Lifting height: 4.900 mm Closed height: 2.160 mm Free lift: 1.490 mm Mast: Triplex (3F490) Fork carriage: 2A Drive: Elektro 48V Battery: 48 V 625 Ah Charger: ohne/without Tyres: Superelastik SE 18 x 7 - 8 (70%) / 15 x 4,5 - 8 (60%) Service weight: 3.417 kg Length: 2.000 mm Width: 1.150 mm Year of manufacture: 2017 Operating hours: 5.358 h Condition: ready to drive Iijdpfxjz Aqr To Apceg EQUIPMENT 3rd valve, Rear work lights, Front work lights, Overhead guard cover, Front windscreen, Pulse control ATTACHMENTS Sideshift Internal no.: 1309248 Location: 14974 Ludwigsfelde bei Berlin Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2019, operating hours: 6,433 h, load capacity: 1,400 kg, lifting height: 5,630 mm, free lift: 1,850 mm, fuel type: electric, mast type: triplex, construction height: 2,524 mm, battery capacity: 560 Ah, battery voltage: 48 V, fork length: 1,100 mm, tire condition: 50 %, front tire type: superelastic tires (black), front tire size: 180x60x10, rear tire type: superelastic tires (black), overall weight: 3,401 kg, total height: 2,524 mm, total length: 1,800 mm, total width: 1,400 mm, fuel: electricity, Equipment: sideshift, LINDE R 14 G – Reach trucks TECHNICAL DATA Lifting capacity: 1.400 kg Lifting height: 5.630 mm Closed height: 2.524 mm Free lift: 1.850 mm Mast: Triplex (3F563) Fork length: 1.100 mm Fork carriage: FEM 2 A Drive: Elektro 48V Battery: 48 V / 560 Ah. v. 2019 Charger: Dreiphasig 48 V Tyres: Superelastik SE 180x60x10 (50%) Service weight: 3.401 kg Length: 1.800 mm Width: 1.400 mm Iedpfx Asz Ap A Repcoig Year of manufacture: 2019 Operating hours: 6.433 h Condition: ready to drive EQUIPMENT 4th valve, Pulse control ATTACHMENTS Sideshift Internal no.: 1309300 Location: 14974 Ludwigsfelde bei Berlin Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Condition: good (used), Year of construction: 1965, functionality: fully functional, Turning length/centre distance: 4m, spindle bore diameter, faceplate D 1000 mm, centre height over carriage 360 mm, 2 steady rests with roller jaw guides retrofitted in 1980, main spindle speed 215 - 355 rpm. Operating manual with wiring diagram, chip guard, quick-change toolholder, carriages recently overhauled, electric control box, weight approx. 15 t. Inspection possible under power, including test run. Iodpjy Ehntefx Apcsig

Year of construction: 2023, operating hours: 500 h, condition: like new (used), number of feeding trays: 2, Scope of supply of the system The offer includes: 1. Mixer • Concrete mixer with a capacity of 9 m³. • Mixer screw inside the mixer has been renewed and reinforced. • The mixer is driven by a powerful electric motor. Iodpfx Aszmyvijpcsig • The mixer is mounted on four load cells (each with a load capacity of 20 t) for precise weighing of the materials to be mixed. 2. Trough screw conveyor 1 • Conveying system for feeding the mixer. 3. Trough screw conveyor 2 • Conveying system for discharging the finished mixed material. 4. Liquid feed • Dosing of liquid components via a pumping system from Flux. 5. Electronic control • Electronic control with a mobile operating unit for weighing and dosing based on the weight increase of the material in the mixer. Mode of operation • The mixer is installed on load cells. The current material weight is displayed on the display at all times. • For example, if a total mixture of 4,500 kg is to be produced, this can be dosed precisely according to a predefined mixing ratio, e.g. 80% main material (3,600 kg), 10% additive (450 kg), 7% additive (315 kg) and 3% additive (135 kg). • The smaller additives are pre-weighed and fed into trough screw conveyor 1 via the additive hopper using a travelling carriage from big bags. • Subsequently, the main material is conveyed into the mixer via trough screw conveyor 1 until the desired total weight of 4,500 kg is reached. • After that, the feed is stopped via the trough screw conveyor. • The mixing process then takes place according to the requirements. In our application, the mixing time was approximately 20 minutes. • After the mixing process is complete, the material is discharged via trough screw conveyor 2. To do this, the direction of rotation of the drive motor is switched at the control panel and the discharge screw conveyor is switched on. • The finished mixture can then be filled directly into containers or loaded into transport vehicles (in our case, a push-off trailer or manure spreader). Mixing process based on weight percentages 1. The main material is fed into the trough screw conveyor via the large stainless steel hopper, which then conveys the material into the mixer. In our case, this consisted of solid components from biogas waste. 2. Additional components can be added directly from big bags onto the main material using a second stainless steel hopper and a traverse. This ensures pre-mixing during the conveying process. In our application, biochar and bentonite were added. 3. Liquid components are sprayed directly into the mixer. In our case, we used EMa (activated effective microorganisms) for this purpose. Optionally, the push-off trailer/manure spreader can be purchased.

Condition: like new (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 19020216, A circular trimming saw and a router for veneer bundles, characterized by a robust, electrically welded construction, high flexural and torsional strength, smaller overall dimensions due to the placement of the feed unit motors in the lower frame, and safety controls. An automatic version with motorized feed is available. -Circular saw, 2.2 kW (3 HP), pneumatic cut height adjustment, mechanical axis adjustment (0 – 3 mm) -Pre-cutting unit with a circular saw blade with height and axial adjustment -Routing unit, 1.1 kW, including an angled router bit (a straight router bit can be purchased separately) -Rear table with a movable stop on ball-bearing rails and pneumatic clamping -Electronic display showing the distance between the stop and the cutting line -Front table, movable for machines with a circular saw and a routing unit -TEX “Power L” touch control panel with programming capabilities -Double hardened and ground rails with linear ball bearings for precise linear movement of all carriages Ijdjz Akftopfx Apcsig -Control panel with switches for main operating modes -Pressure beam with two pneumatic cylinders and a torsion bar -Cable chain with cable protection -Double-tube inlet for connecting to a dust extraction system -Filter pressure regulator with a lubricator on the compressed air supply line -Optical safety sensors (safety level 4) -CE safety standard -Year of manufacture 2018, put into operation in 2019 Technical data: Cutting length: 3100 mm Circular saw blade diameter: 180 mm Cutting height: 45 mm Feed speed: 0 - 20 m/min Saw motor power: 2.2 kW Router motor power: 1.1 kW Voltage: 380 V

Condition: used, Year of construction: 2011, functionality: fully functional, Werth Metrology: Scope - Check 650 MB Z 3D CNC 650x750x500 Standard accuracy Measuring range: X = 650 mm Y = 750 mm Z = up to 500 mm The measuring range available for measuring workpieces is determined by the sensor and accessory configuration. Machine dimensions: W = 1230 mm D = 1560 mm H = 2550 mm Max. permissible workpiece weight: 500 kg Machine weight: approx. 1410 kg Coordinate measuring machine in bridge construction for 3D CNC operation with standard accuracy. The multi-sensor concept supports combined measurement with multiple sensors. Technical features: - Base unit on a solid base in a "moving bridge" design - Air-bearing bridge in the Y-axis with integrated air-bearing carriage in the X-axis and air-bearing Z-axis on a solid base - Maximum permissible length measurement deviation MPE in accordance with ISO 10360 or VEDI VDE 2617 (with motorized zoom optics, maximum magnification, or sensor with the same or better probing deviation) The device functions perfectly. The measuring machine can be tested on-site if desired. Iodpfxsy Uly Ss Apceig Important information: A computer with the operating system Windows XP is also included – it runs smoothly. Software version of Werth measuring software: - see photo. If someone wants to have a current operating system, the update must be performed independently.

Condition: used, Makatrol Smart Control Serial Number 254702 YOM 2014 Iodpfxezilpme Apcjig EIA & Mazatrol Programming Full Factory 4th Axis 30 Tool Magazine CAT Tooling USB Ports No swarf conveyor or thru coolant UK Buyers - Price £39,000 +VAT Carriage/delivery is additional

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2017, operating hours: 10,210 h, load capacity: 1,500 kg, lifting height: 3,100 mm, free lift: 1,480 mm, fuel type: electric, mast type: duplex, construction height: 2,050 mm, battery capacity: 500 Ah, battery voltage: 48 V, fork length: 1,600 mm, tire condition: 50 %, front tire type: superelastic tires (black), front tire size: 18 x 7 - 8, rear tire type: superelastic tires (black), rear tire size: 15 x 4,5 - 8, overall weight: 3,027 kg, total height: 2,050 mm, total length: 1,850 mm, total width: 1,070 mm, fuel: electricity, Equipment: sideshift, JUNGHEINRICH EFG 215 SP115-310ZZ – Electric 3-wheel forklift TECHNICAL DATA Lifting capacity: 1.500 kg Lifting height: 3.100 mm Closed height: 2.050 mm Free lift: 1.480 mm Iedez Aprljpfx Apceig Mast: Duplex (2F310) Fork length: 1.600 mm Fork carriage: 2A Drive: Elektro Battery: 48 V 500 Ah v. 2017 Charger: 48 V 90 A not tested Tyres: Superelastik 18 x 7 - 8 (50%) / 15 x 4,5 - 8 (25 %) Service weight: 3.027 kg Length: 1.850 mm Width: 1.070 mm Year of manufacture: 2017 Operating hours: 10.210 h Condition: ready to drive EQUIPMENT 3rd valve, Front work lights, Pulse control ATTACHMENTS Sideshift Internal no.: 1308638 Location: 14974 Ludwigsfelde bei Berlin Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2016, operating hours: 14,208 h, load capacity: 1,800 kg, lifting height: 3,300 mm, free lift: 1,550 mm, fuel type: electric, mast type: duplex, construction height: 2,150 mm, battery capacity: 750 Ah, battery voltage: 48 V, fork length: 1,150 mm, tire condition: 15 %, front tire type: superelastic tires (black), front tire size: 200/50 - 10, rear tire type: superelastic tires (black), rear tire size: 15 x 4,5 - 8, overall weight: 3,497 kg, total height: 2,150 mm, total length: 2,000 mm, total width: 1,120 mm, fuel: electricity, Equipment: sideshift, JUNGHEINRICH EFG 218 GE120-330ZZ – Electric 3-wheel forklift TECHNICAL DATA Lifting capacity: 1.800 kg Lifting height: 3.300 mm Closed height: 2.150 mm Free lift: 1.550 mm Mast: Duplex (2F330) Fork length: 1.150 mm Fork carriage: 2A Drive: Elektro Battery: 48 V 750 Ah v. 2016 Charger: ohne/without Tyres: Superelastik 200/50 - 10 (15 %) / 15 x 4,5 - 8 (0%) Service weight: 3.497 kg Length: 2.000 mm Width: 1.120 mm Year of manufacture: 2016 Operating hours: 14.208 h Condition: ready to drive EQUIPMENT 3rd valve, Rear work lights, Front work lights, Overhead guard cover, Front windscreen ATTACHMENTS Sideshift Internal no.: 1308609 Location: 14974 Ludwigsfelde bei Berlin Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin. Iiedjz Apqzspfx Apceg

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2017, operating hours: 13,631 h, load capacity: 1,600 kg, lifting height: 3,300 mm, free lift: 1,570 mm, fuel type: electric, mast type: duplex, construction height: 2,160 mm, battery capacity: 750 Ah, battery voltage: 48 V, fork length: 1,150 mm, tire condition: 75 %, front tire type: superelastic tires (black), front tire size: 18 x 7 - 8, rear tire type: superelastic tires (black), rear tire size: 15 x 4,5 - 8, overall weight: 3,171 kg, total height: 2,160 mm, total length: 2,000 mm, total width: 1,080 mm, fuel: electricity, Equipment: sideshift, JUNGHEINRICH EFG 216 GE 115-330ZZ – Electric 3-wheel forklift TECHNICAL DATA Lifting capacity: 1.600 kg Lifting height: 3.300 mm Closed height: 2.160 mm Free lift: 1.570 mm Mast: Duplex (2F330) Fork length: 1.150 mm Fork carriage: 2A Drive: Elektro Battery: 48 V 750 Ah v. 2017 Charger: 48 V 150 A not tested Tyres: Superelastik 18 x 7 - 8 (75%) / 15 x 4,5 - 8 (40%) Service weight: 3.171 kg Length: 2.000 mm Width: 1.080 mm Year of manufacture: 2017 Operating hours: 13.631 h Condition: ready to drive EQUIPMENT 3rd valve, Rear work lights, Front work lights, Pulse control ATTACHMENTS Sideshift Iedez Aprrspfx Apcsig Internal no.: 1308639 Location: 14974 Ludwigsfelde bei Berlin Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2017, operating hours: 7,254 h, load capacity: 1,400 kg, lifting height: 3,380 mm, free lift: 1,580 mm, fuel type: electric, mast type: duplex, construction height: 2,160 mm, battery capacity: 625 Ah, battery voltage: 48 V, fork length: 1,600 mm, tire condition: 80 %, front tire type: superelastic tires (black), front tire size: 18x7-8, rear tire type: superelastic tires (black), rear tire size: 15x4,5-8, overall weight: 3,100 kg, total height: 2,160 mm, total length: 2,050 mm, total width: 1,100 mm, fuel: electricity, Equipment: sideshift, STILL RX 20-14 / 6209 – Electric 3-wheel forklift TECHNICAL DATA Lifting capacity: 1.400 kg Lifting height: 3.380 mm Closed height: 2.160 mm Free lift: 1.580 mm Mast: Duplex (2F338) Fork length: 1.600 mm Fork carriage: FEM 2A Drive: Elektro Battery: 48 V/625 Ah (2017) Charger: ohne/without Tyres: Superelastik 18x7-8 (80 %) / 15x4,5-8 (60 %) Service weight: 3.100 kg Iiodsz App Dopfx Apcog Length: 2.050 mm Width: 1.100 mm Year of manufacture: 2017 Operating hours: 7.254 h Condition: ready to drive EQUIPMENT 3rd valve, 4th valve, Front work lights, Overhead guard cover, Front windscreen ATTACHMENTS Sideshift, Fork positioner Internal no.: 1308869 Location: 14974 Ludwigsfelde bei Berlin Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Condition: used, functionality: fully functional, Year of construction: 2001, operating hours: 18,875 h, load capacity: 4,500 kg, lifting height: 4,300 mm, fuel type: diesel, mast type: simplex, construction height: 2,950 mm, fork carriage width: 1,350 mm, fork length: 1,100 mm, empty load weight: 6,500 kg, total length: 3,000 mm, drive type: Diesel, construction width: 1,500 mm, Diesel forklift Load center: 500 Fork width: 120 mm Fork thickness: 50 mm ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Standard Transmission: Hydrostatic Condition: Ready for use and fully functional Iiodpfezllz Isx Apcog Technical condition: good Front tire type: Superelastic Front tire size: 355/65-15 Front tire condition: 20 - 40% Rear tire type: Superelastic Rear tire size: 250-15 Rear tire condition: 80 - 100% Description: Half cab, work lights front and rear, 3rd and 4th valve to fork carriage, 1x cross lever, 2x single lever, two-pedal system Side shifter, Integrated side shifter 3rd valve, 4th valve, work light rear, work light front, half cab, load backrest, dust filter, interior mirror, windshield wiper, LED, seat

Condition: refurbished (used), Year of construction: 1991, functionality: fully functional, Complete extrusion line for PVC profiles, fully overhauled and tested EXTRUDER: • IDE 75/25 type ME7/3 • single screw, PVC profile geometry and barrel in good condition • screen control (retrofitted by the manufacturer) • year of manufacture: 1993 • 35kW motor, 4 to 40 rpm COEXTRUDER: • IDE MEB 30/25D • Single screw Ø30mm 25LD • PVC profile geometry screw and sleeve in good condition • Year of manufacture: 1992 • 3.8kW motor, 6 to 64 rpm CALIBRATION : Iiodpoya Eldsfx Apcog • IDE • Length: 2 metres • 2 vacuum pumps, 16 valves • 14 water valves • Manual horizontal and longitudinal adjustments HAUL OFF: • IDE ME30/5 • Year of manufacture: 1993 • Contact length: 1100 mm • Width: 100 mm CIRCULAR SAW • IDE ME52 • Blade: 300 mm • Pneumatic carriage travel 180 mm • Year of manufacture: 1991 TILTING TABLE • IDE • Length: 4000 mm • Pneumatic movement Everything is in very good overall condition, the machines are very clean and ready for use.

Condition: used, Year of construction: 2018, operating hours: 2,332 h, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 3,500 kg Lifting height: 5,000 mm Fork carriage adjustment range: 370–1,300 mm MACHINE DETAILS Mast type: Triplex mast with full free lift Drive type: Electric Dimensions & Weight Dimensions (L × W × H): 4,500 × 1,300 × 2,550 mm Dead weight: 6,000 kg Battery voltage: 80 V Battery capacity: 625 Ah Battery type: I5PzS Battery resting voltage: 83.1 V Service valid until: 04/2027 UVV (German accident prevention regulations) valid until: 04/2027 Operating hours: 2,332 h EQUIPMENT 3rd and 4th valve Triplex mast with full free lift Fork carriage with side shifter Windshield with windshield wiper Roof window Iedpszz Hm Defx Apcsig White, non-marking tires LED work light (front) LED work light (rear) Orange warning light Comfort seat All dimensions are approximate. No guarantee is given for typing or measurement errors. Collection conditions: Side loading up to 6 t is possible with a large forklift truck on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 t, and up to a width of 230 cm. Collection is only possible after receipt of payment confirmation by email. Collection without prior registration is possible from Monday to Friday between 07:00 and 16:00. In case of delayed collection, a storage fee of €20 per machine per day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 39