Used Cam Shaft Grinding for sale (11,038)

Condition: excellent (used), Year of construction: 1997, Max. grinding diameter: 130mm Grinding wheel length: 150mm Grinding wheel diameter: 400mm Gujdpj Af U H Uofx Af Tsi YOM: 1997

Condition: good (used), Year of construction: 1990, Hydraulic surface grinding machine with automatic vertical feed Max. grinding length 670 mm Max. grinding width 280 mm Max. grinding height 400 mm Table speed, longitudinal 2 – 35 m/min Table speed, transverse 0.3 – 40 mm/stroke Rapid traverse yes Grinding wheel dimensions 300 / 76 x 40 mm Drive power 4 kW Machine dimensions L x W x H 2000 x 1850 x 2000 mm Machine weight 2300 kg Hydraulic and electrical system dimensions L x W x H 1200 x 800 x 2000 mm Hydraulic and electrical system weight 650 kg Accessories / Special features: • Permanent magnet clamping plate 630 x 200 mm • Automatic vertical feed with digital display • Manual dressing device • Coolant system • Separate hydraulic unit • Grinding wheel • Machine alignment elements Note: o Hydraulic cylinder for table stroke newly sealed o New filters in the hydraulic unit o Handwheel adjustment for transverse stroke newly mounted Guedpfxof Um Raj Af Tei Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Year of construction: 1988, condition: used, machine/vehicle number: 01910/88, Floor sanding machine, Eugen Laegler Type: Vibrafor Motor power: 1.1 kW Godpfx Afjcb Au Sj Teui Voltage: 220 V Vibrating sanding surface Dust bag Location: 54634 Bitburg – can be inspected.

Condition: excellent (used), Year of construction: 2008, Table size 600 x 300 mm Max. grinding area 600 x 300 mm Dimensions of the grinding wheel 406 x 50 x 127 mm Min. / max. distance table / spindle center 500 mm Table speed, hydraulically adjustable 5 - 25 m/min. Cross feed 0.1 – 20 mm Cross travel 900 mm/min. Handwheel, cross 1 revolution 5 mm 1 division mark 0.02 mm Automatic vertical feed 0.001 - 0.999 mm/cycle Handwheel, vertical 1 revolution 2 mm 1 division mark 0.01 mm With AD 5 (automatic feed) 0.005 mm Grinding motor speeds 1450 / 2900 rpm Grinding motor 1.5 / 3.7 kW Hydraulic pump motor 0.75 kW Drive motor, cross 1.1 kW Gsdpfxoizka Io Af Tjui Drive motor, vertical 1.1 kW Machine dimensions L x W x H approx. 2300 x 1800 x 2100 mm Weight 1700 kg Accessories / Special features: • 2-axis digital display • Automatic vertical feed with spark-out and subsequent retraction • Electro-magnetic clamping table L x W 600 x 300 mm • Manual grinding wheel dressing device • Grinding wheel speed, 2 stages • 1 grinding wheel with flange • Control panel • Lighting • Coolant system with band filter and magnetic separator • Machine feet • CE compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 11-153 DE - 44143 Dortmund - Wambel / Germany

Condition: repair required (used), Year of construction: 2019, operating hours: 6,725 h, Equipment: Base version DW 3060-F "Büffel" Central axle trailer chassis with 3 axles, 80 km/h road approval Brake system incl. ABS and lighting in accordance with EC directive 50 mm EC towing eye incl. slip-on shoe Hydraulically adjustable support leg Splash guards (inner and side mudguards) Permissible total weight 25,000 kg Tyres: 385/65 R22.5 Guedpjy D Nicofx Af Toi Mercedes-Benz/MTU diesel engine 6R1300, 320 kW at 2,000 rpm, complies with EUROMOT IV emission standard Auxiliary hydraulic connection 20 l/min Hydraulic pre-equipment for traction drive Fuel tank 2 x 300 litres Roller length 3,000 mm, diameter 600 mm Trapezoidal teeth for roller (21 pcs) and tooth bar (22 pcs) – Size L (174 mm, armored) Rear conveyor: belt length 5,500 mm, belt width 1,200 mm, hydraulically foldable, with anti-magnetic center section Discharge conveyor: belt length 3,300 mm, belt width 1,000 mm Centrally arranged lubrication strips 24V electrical control system Roller reversal via electric motor when engine is stationary Automatically reversible cooling fan Chassis with level control Acoustic start-up warning Doppstadt telematics system Paint finish: RAL 2011 deep orange Optional equipment: Hydraulic traction drive Auxiliary hydraulic connection 70 l/min Radio remote control Overband magnet for rear conveyor Frame for overband magnet Moistening system Delivery date upon agreement

Condition: used, Year of construction: 1973, Technical details: grinding length: 400 mm grinding width: 200 mm workpiece height: 300 mm Godpfx Afoxu Dv Ae Tsui dimensions of grinding wheel: 275 - 315 mm magnetic plate size: 400 x 200 mm max. table load: 200 kg weight of the machine ca.: 1,6 t dimension machine xH: 1,55 x 1,45 x 2,20 m

Condition: reconditioned (used), Year of construction: 1988, Graver grinding machine Make: Deckel Model: S0E Year of manufacture: 1988 - overhauled, repainted RAL7035 light grey / RAL7012 basalt grey Machine no.: 88-6730 Gedpolxpfmjfx Af Tjui Guarantee: 12 months single shift from delivery For machines located outside of our Northern Bavarian sales area, the travel costs are to be borne by the customer. Accessories: - Machine stand - Integrated dust extraction - Grinding wheel with flange - Pulling tool - Operating instructions Incl. installation of an on/off switch with undervoltage release to implement restart protection e.g. in the event of a power failure or pulling the power plug incl. production of a mounting adapter plate Used as seen The machine is technically corresponding to the state of the year it was built.

Condition: good (used), Manufacturer: JUNG Stock number: 3018 Year of manufacture: Machine number: 4985 Type: HF 50 RD Grinding length: 500 mm Grinding width: 200 mm Clamping area table: 700 x 200 mm Magnet: 450 x 175 mm Max. table–spindle distance: 350 mm Table longitudinal travel: 1 to 24 m/min steplessly adjustable Table cross travel: 0.2 to 8 mm steplessly adjustable, automatic Grinding head vertical adjustment: 0.001 to 0.01 mm automatically adjustable Spindle speed: 1,000 to 4,000 rpm Grinding wheels: 225 x 20 x 51 mm Connection: 4.7 kW Guedew Apm Sepfx Af Tji Accessories/Equipment: Diaform device, Heidenhain display for one axis Condition: Good Weight: 1.55 t Dimensions: 1,700 x 1,600 x 2,000 mm

Condition: used, Year of construction: 1998, Danobat CNC Cylindrical Grinder RP 1600 E - System 200 BTV 30 CNC Control, Year Of Manufacture 1998, Coolant, steadies & accessories, manuals, Wheel Balancer. Gusdpfx Afsw A Sd Hs Toi

Condition: used, Year of construction: 1960, functionality: fully functional, x-travel 500 mm breite 450 mm serial number 386 Godpezkbqiefx Af Teui weight of the machine ca. 1,8 t

Condition: good (used), Year of construction: 1980, Grinding machine with an adjustable clamping bar, up to a maximum of 1200 mm. Maximum workpiece thickness: 30 mm. Gujdpfx Afjzczlre Toi

Condition: good (used), Tool grinding machine, grinding machine, angle grinder, turning tool grinding machine, steel grinding machine -Elysier grinding: possible with the machine -Speed: 1500 rpm -Grinding wheel: Diamond grinding wheel -1x angle tables: 220 x 310 mm -Angle adjustment: 15° to -5° -Oscillation: 0-35 mm -Water cooling with: electrolytes -Grinding dust extraction Gusdpfx Afodz U Tls Toi -max. steel cross-section: mm -Number: 1x grinding machine available -Price: per piece -Dimensions: 850/700/H1400 mm -Weight: 580 kg

Year of construction: 2022, condition: as good as new (ex-display), AL-KO Grinding Table AST 1.5 BASIC The AL-KO Grinding Table AST 1.5 BASIC is the entry-level model in the AL-KO grinding table range. It is certified according to GS-HO-11 and bears the seal "Tested for wood dust according to BGI 739-1". Gsdpodqzhbjfx Af Tjui YOUR ADVANTAGES Accessible from 4 sides Can be loaded with up to 150 kg Manual, tool-free height adjustment with scale Recessed longitudinal sides for edge grinding Workpiece-friendly beech wood grating (removable) Funnel-shaped air duct to the extraction nozzle TECHNICAL DATA AST 1.5 BASIC Extraction nozzle 140 / 160 mm Required extraction capacity 1,500 m³/h Negative pressure at the nozzle at 22 m/s 1,000 Pa at DN140 mm 700 Pa at DN160 mm Adjustable working height from 735-1,015 mm Working area (W x L) 946 x 1,500 mm Dimensions (W x L) 1,000 x 1,600 mm Weight approx. 73 kg

Condition: used, Year of construction: 2001, Technical details: grinding length: 2500 mm grinding width: 800 mm workpiece height: 800 mm Table movement horizontal: Längshub: 2700 mm Table movement horizontal: Querhub: 800 mm table speed: längs: 1 - 35 / quer: 0 - 3 m/min feed: vertical: 0,001 / quer: 0,0025 mm/Hub magnetic plate size: 2500 x 800 mm Automatic grinding wheel feed: 0,001 mm distance table - spindle center: 900 mm grinding spindle speed: k.A. U/min dimensions of grinding wheel: 400 x 76 x 127 mm total power requirement: 36 kW weight of the machine ca.: 13,5 t dimension machine xH: 7,5 x 2,8 x 2,7 m dimension coolant device LxWxH: 1,8 x 1,0 x 0,92 m dimensions of hydaulic: 1900 x 800 x 1500 mm transport measurements machine: L: 8,0 x B: 2,4 x H: 2,85 m The machine is currently in the technical department. Guodpfx Afevbgr Ro Tei technical features: -Hydraulic unit -dressing device *

Condition: good (used), Studer S30-12 cylindrical grinding machine TECHNICAL DATA Main dimensions Center height: 125 mm Center width: 400 / 700 / 1025 mm Largest longitudinal slide path: 400 / 700 / 1000 mm Longitudinal slide Table speed: 50 - 5000 mm/min Reversing delay: 0-6 s Smallest automatic travel: 1.5 mm Max. stroke: 400 / 700 / 1020 mm Max. Table inclination: 12 / 30 / 78° Cross slide Swivel range: +- 45° Quick adjustment: 40 mm Feed path with handwheel: 20 mm Largest plunge depth: 1.7 mm Sanding headstock Grinding wheel diameter x width x bore: 450 x 80 x 203 mm Speed: 1340 / 1500 1625 / 1800 / 2000 / 2200 rpm Coarse adjustment: 210 mm Workpiece headstock Swivel range: 0 - 90 Speed range: 30 - 675 rpm Mounting cone: Morse 5 Collets: W25 Tailstock Gjdjvca Izepfx Af Toui Mounting cone: Morse 3 Adjustment travel of the center: 30 mm Total power requirement: 5 / 8.25 kW No liability is assumed for the correctness, completeness and up-to-dateness of the information.

Year of construction: 1971, condition: used, Technical details: Gedpfx Aevc Apbof Teui max. wheel diameter: 300 mm max. module: 5 module min. : 0,5 max. workpiece weight: 60 kg weight of the machine ca.: 4,0 t dimensions of machine: 1800x1850x2500 mm dimensions electric cabinet: Nr. 1: 1930x400x1920 mm dimensions electric cabinet: Nr. 2: 800x230x1950 mm dimensions:: Abluftanlage: 1400x700x560 mm dimension cooling device LxWxH: 1,2 x 1,0 x 0,45 m Electronically controlled tooth flank grinding machine up to module 5 and a Ø of 240 - 300 mm feed speed per workpiece revolution infinitely variable 0.4 - 3.2 mm max./min. Number of teeth: 130 / 12 max./min. Pressure angle: 30° / 14°30` max./min. Spiral pitch with 24 teeth: 6000 / 200 mm max. tooth helix angle, both sides: 45° Speed of the grinding worm: 1900 rpm without dressing device Equipment: approx. 77x change transmission wheels, pipe extensions and various tools Two of these machines are for sale. Both machines are supplied via two common control cabinets and an exhaust air system. *

Condition: excellent (used), AGATHON 150 SL2 Centerless cylindrical grinding machine TECHNICAL DATA Working wheel: Diameter: 150 mm width: 50 mm Bore: 50 mm Regulating disk: Diameter: 100 mm Width: 50 mm Bore: 40 mm Godpfx Aor Hdi Aof Tsui Workpiece diameter: Minimum: 0.1 mm Maximum: 12 mm Max. Length for plunge-cut grinding: 49 mm Weight: 750 kg Connected loads: 3 X 380 V / 50 Hz Compressed air: 5-6 bar Dimensions: Machine: 1000 x 500 x 880 mm Electrical cabinet: 1550 x 540 x 420 mm Coolant tank: 750 x 550 x 700 SCOPE OF OFFER U.A: (list not exhaustive): Grinding wheels regulating wheels Spare flange mandrel Grinding pads Complete operating documentation Exact scope of offer according to photo gallery We assume no liability for the accuracy, completeness and up-to-dateness of the information provided.

Condition: used, Year of construction: 1998, Technical details: internal diameter: 63 mm swing diameter: 800 - 320 mm grinding depth: 380 mm Gusdpfxsu Ngaue Af Toi dimensions of grinding wheel: Ø 65 x 25mm (Topfscheibe) mm feed:: 0,05 - 0,40 U/min / 8 step U/min total power requirement: ca. 1,1 kW weight approx.: 1060 kg dimension machine xH: 1,1 x 1,1 x 1,4 m Brake Drum Grinding Machine - turning Ø max./min.: 800 / 320mm - brake drum holder: 63mm, quill stroke 120mm - turning support: longitudinal travel 380mm; transverse travel 200mm - steel holder holder: 180 x 140mm, steel holder 58mm, turning tool for insert holder 20 x 20mm - operation via control panel *

Condition: used, Year of construction: 1987, Technical details: grinding length: 600 mm Gedpfx Aju Ngicjf Tjui grinding width: 350 mm workpiece height: 600 mm feed: 1 - 30 m/min magnetic plate size: 610 x 255 mm distance table - spindle center: min./max. 150 / 420 mm grinding spindle speed: 3000 U/min stroke of the table: min./max.: 200 / 650 mm total power requirement: ca. 4,0 kW weight of the machine ca.: 2,5 t dimension machine xH: 1,5 x 1,9 x 2,0 m dimension coolant device LxWxH: 0,63 x 0,40 x 0,65 m Headstock: -vertical travel Y = 0.002 - 0.06 mm -adjustment = 0,001 - 2mm Cross slide: -transverse travel Z = 360mm -feed adjustment = 1 - 60mm/stroke -rapid traverse = 1.2 m/min. Dressing manual Cooling water unit with capacity 140Liter Equipment: -3x support feet -machine lighting accessories: -alignment device for grinding wheel holder *

Condition: used, Year of construction: 1984, Technical details: grinding length: 500 mm grinding width: 250 mm workpiece height: 250 mm table surface area: 530 x 200 mm magnetic plate size: L:460 x B:150 x H:87 mm table speed: 2 - 32 m/min table adjustment: Längsweg: 550 mm table adjustment: Querweg: 300 mm feed of spindle: 0,001 mm/Hub grinding spindle speed: 3.000 U/min dimensions of grinding wheel: max. Ø 250 x B:25; Bohung Ø 76 mm total power requirement: 4,3 kW Gjdpeu Ngkyofx Af Toui weight of the machine ca.: 2,2 t dimension machine xH: 2,3 x 1,8 x 2,2 m dimensions of hydaulic: L: 500 x B: 480 x H: 680 mm dimension coolant device LxWxH: 0,65 x 0,45 x 0,8 m The machine is currently equipped with a grinding wheel Ø 240 x 22mm. On the table there is a permanent magnet plate with 30 induction fields, operated by a hand lever. Operation via swiveling control panel. no dressing device incl. oil collecting tank; grinding wheel holder and available documentation *

Condition: used, Year of construction: 1971, Technical details: grinding length: 700 mm workpiece height: 80 mm Table dimensions: 105 x 725 mm feed range: mechanisch total power requirement: 0,8 kW dimension machine xH: 0,7 x 1,3 x 1,4 m Application: Grinding of linear surfaces for shearing knives and div. tools. Grinding support: -Vertical adjustment travel 45mm hand crank. -speed 2840 rpm -rotate 20° right/left -swivel 40° back and forth Gedpfx Asu Ngk Tsf Teui table: -with stop bar 730mm -equipped with 2x clamps / 2x fences -grinding depth by manual adjustment 80mm -mechanical feed, adjustment travel approx. 0.3 mm/double stroke -swivel 5° - 25° via hand toggle -1x chucking groove centered accessories: Box with div. grinding wheels *

Condition: used, Technical details: swing diameter: 200 mm centre distance: 450 mm cross travel: 245 mm longitudinal feed: 830 mm table speed: 0,05-4,5 stufenlos m/min revolution per minute: Schleifspindel 1780, 2050 U/min revolution per minute: Werkstückspindel 50-500 U/min dimensions of grinding wheel: 350x32x127 mm Table dimensions: 2200x280 mm table swivelling to both sides: 9°vor+10°zurück Grad total power requirement: 6,0 kW weight of the machine ca.: 2,2 t Godpfx Afou Ng Dge Teui dimensions of machine: 2,2x2,05x1,6 m Universal Center Grinding Machine without internal grinding device! - for precision grinding of outer, inner such as cone surfaces - feed of grinding headstock via hydr. or manual possible - table feed hydraulic stepless - grinding spindle swivelable with 60 degrees - workpiece headstock 90 degress swiveable with tapper MK4 - tailstock tapper MK 3 equipment: - dressing device/extruder - coolant tank incl. pump and supply i.D. *

Condition: used, Kikinda cylindrical external grinder. Grinding wheel diameter: 600 x 80 mm. Working length: 1100 mm and grinding diameter: 320 mm. Gjdpfx Afs Agvxqo Tsui

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, grinding length: 400 mm, grinding width: 200 mm, grinding height: 300 mm, table load: 150 kg, overall weight: 1,500 kg, rotational speed (max.): 2,800 rpm, Working area Grinding length 400 mm Grinding width 200 mm Grinding height 300 mm Optional grinding height 450 mm Maximum table load 150 kg X-axis – Longitudinal movement Table longitudinal travel 10–420 mm Table speed 0.005–35 m/min Y-axis – Vertical movement Distance from table to spindle center 90–415 mm Optional 90–565 mm Vertical speed 100–2,000 mm/min Z-axis – Lateral movement Maximum lateral travel 200 mm Lateral speed 100–2,000 mm/min Grinding spindle Motor power 2 kW Optional motor power 3.7 kW Grinding spindle speed 2,800 rpm Gusdpfx Asz Sra Nsf Tsi Grinding wheel 225 × 25 × 51 mm Dimensions Length approx. 2,000 mm Width approx. 2,300 mm Height approx. 2,300 mm

Condition: used, mileage: 350,000 km, power: 155 kW (210.74 HP), first registration: 01/2020, fuel type: diesel, overall weight: 7,200 kg, color: yellow, gearing type: automatic, emission class: euro6, number of seats: 3, total length: 6,930 mm, total width: 2,550 mm, total height: 2,950 mm, loading space length: 4,260 mm, loading space width: 2,400 mm, loading space height: 1,850 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, For sale is a well-maintained Iveco Daily 72-210 beverage truck equipped with the globally popular 3.0-liter diesel engine. * The vehicle is in good condition! * German vehicle * Euro 6 standard * 1st owner * N1 truck registration Equipment: * Beverage truck body * Flatbed + tarpaulin * HI-Matic automatic transmission * Air suspension * Automatic climate control * Tow hitch * Rearview camera * Cruise control * Heated exterior mirrors * Electric exterior mirrors * Electric windows * Central locking * and more... Technical data: Permissible total weight: 7200 KG * Unladen weight: approx. 3500 KG * Payload: 3700 KG * Trailer load: 3300 KG Why we are the right choice? Attractive financing through our partner bank. * Nationwide delivery of your desired vehicle * Trade-in of your old vehicle at fair conditions * Transit registration (5-day / customs registration) usually on the same day * Airport or train station pick-up service Gusdpjz Ex Ewsfx Af Tsi All vehicles are professionally detailed and hygienically cleaned! The special features: Disinfection of the interior and ventilation system using ozone cleaning. 2-stage polishing on the exterior * If necessary, paint correction and smart repair All our vehicles have also undergone a thorough maintenance service. Of course, this includes new fluids, filters and other services that you shouldn't have to worry about. Optionally, we can present the vehicle to an independent inspection center or workshop of your choice. We are pleased to have aroused your interest and are available to you around the clock. If you have any questions, comments or special requests, please do not hesitate to contact us! More information and insights into our business philosophy can be found at: Special equipment: Storage compartment on dashboard with USB connection, front axle load 2.7 t, trailer socket 13-pin, audio system: digital audio system (DAB) with USB and Bluetooth hands-free system, audio/telephone controls on the steering wheel, body manufacturer interface, vehicle key with remote control, speed limiter system programmable, cooling compressor 170 ccm, steering column (steering wheel) height/longitudinally adjustable, smoker's package, switch for lighting in the cargo area, mud flaps front, Traction Plus (electronic traction control) with hill descent assist Further equipment: Airbag driver side, trailer stabilization program (TSM), trailer socket preparation, drive slip control (ASR), design: C-series, exterior mirrors electrically adjustable and heated, exterior mirrors long, for vehicle width 2350 mm, electronic brake force distribution, driving assistance system: emergency braking assistant AEBS + City Brake, tachograph digital, front axle suspension: torsion bar spring, windshield and side windows tinted, generator 210 A, speed limiter 90 km/h, grab handle A-pillar, urea tank (AdBlue): 20 L, body/structure: standard flatbed, fuel tank: 90 L, engine 3.0 L - 154 kW diesel, wheelbase 4100 mm, spare wheel in driving condition, spare wheel holder between floor longitudinal members, low emission according to emission standard Euro 6d, seats in the cab: co-driver double seat, seats in the cab: driver's seat comfort (hydraulic), maintenance indicator, permissible total weight 7.00 t, twin tires on 2nd axle / rear axle