Used Cam Shaft Grinding for sale (10,706)

Condition: ready for operation (used), Technical data: Power kW 0.9 Connection 380 V/50 Hz Speed 2,900 rpm Disc dimensions 175/60/51 Weight 117 kg Equipment:  2 ATS tables (spring-mounted table)  2 diamond cup wheels 175x60x51 mm  Column design Cjdpfx Asza Dwxeirogu

Condition: used, Year of construction: 2018, controller manufacturer: Mitsubishi, controller model: GOT 2000, _____ Description: Cgsdpfxszaynts Airju Year of manuf. : 2018 Control : Mitsubishi GOT 2000 Grinding length : 1200 mm Grinding width : 600 mm Equipment: Year of manufacture:2018 Control system:Mitsubishi GOT 2000 X-axis:1,600 mm Z-axis:650 mm Grinding wheel dimensions:400 x 50 x 127 mm Speed range:1,000–2,500 rpm Power:11 kW Magnetic worktable:1.200 x 600 mm Coolant supply:Coolant system with filter Emulsion mist separator:Reven Setup mode:Electronic handwheel

Condition: excellent (used), workpiece diameter 30 - 325 mm grinding depth 60 mm clamping length 1000 mm Csdpfjy Ihb Sex Airsgu center hole 1 - 30 mm weight of the machine ca. 0,2 t dimensions of the machine ca. 0,5 x 0,5 x 1,7 m dressing unit, counter steady, grinding stones

Condition: used, Year of construction: 2018, functionality: fully functional, type of input current: three-phase, overall weight: 255 kg, table load: 200 kg, A table with a lower extraction system combines a workbench with an exhaust/filtration system. Fumes and dust are extracted through the tabletop and rear panel and filtered using filters mounted in the table structure. The table can be placed anywhere, at any welding or grinding station. A three-stage spark separator enhances safety and meets the most stringent international guidelines for fumes and dust. DraftMax Ultra features an automatic filter cleaning mechanism that is activated when the fan is turned off (cleaning in the off state) or when the pressure difference before the filter exceeds a certain value. The presence of compressed air is continuously monitored. Furthermore, an automatic start/stop device can be added to the DraftMax Ultra, providing even easier operation of the table. This is an ideal table for very intensive welding or grinding applications. Work surface dimensions: 1366 mm x 750 mm Weight: 255 kg Noise level: 74 dB Cgodszaugwepfx Aireu Supply voltage: 400 V/3~/50 Hz Motor power: 2.2 kW Efficiency: 2500 m³/h Filtration area: 2 x 26 m² Filtration efficiency: >99.9% (filter class: M) Stock number: 1149

Condition: used, Technical details: grinding length: 300 mm centre height: 175 mm swing diameter: 315 mm table clamping surface LxW: 1.800 x 200 mm control: Heidenhain Longitudinal adjustment of grinding unit on table max.: 1100 mm work piece spindle speed: 3steps/1500-2200 U/min feed continuous: 0,001-1 mm Max. travel x-axis: 300 weight of the machine ca.: 3,1 t Cgodpfx Aozaunzjirsu dimension machine xH: 2,9 x 1,6 x 1,4 mm Swivel for right and left machining Automatic table reversal Tailstock: MK3 holder Operation: Manual control unit/foot switch Coolant: System with feed Heidenhain measuring device *

Condition: ready for operation (used), For sale here is an optical profile grinding machine by Fritz Werner, type SP. The machine is in very good condition and can be tested on site. Technical data: - Axial relief: 0 to +35 - Lateral relief: ±15 - Grinding carriage stroke, fine adjustment: 36 to 72 per min - Maximum grinding wheel diameter: 175 mm Cgjdpfewv Havsx Aireu - Grinding spindle speed: 1925 to 3850 per min - Maximum workpiece height: 125 mm - Workpiece length: 250 mm - Variable speed motor for grinding spindle: 1400 to 2800 per min Should you have any further questions, please feel free to contact me.

Condition: ready for operation (used), The machine is in very good condition and can be tested on site. Technical Data – Grinding Machine Machining area (mm) Height x Length x Depth: 80 x 110 x 55 Motor power (kW): 0.5 Speed (min-1): 5000 Feed rate (hod/min): 150 Table load (kg): 20 Cgedpfowvgidsx Aireu Control: BOSCH Accuracy: 0.005 mm, reading via CNC, template grinding 1:10, 1:20, or 1:50, suitable for rough grinding. If you have further questions, I am at your disposal.

Condition: used, mileage: 52,530 km, power: 100 kW (135.96 HP), fuel type: diesel, gearing type: automatic, first registration: 01/2023, fuel consumption (urban): 6.9 l/100km, fuel consumption (extra-urban): 5.8 l/100km, fuel consumption (combined): 6.2 l/100km, CO₂ emissions: 164 g/km, emission class: euro6, color: white, suspension: steel, number of seats: 8, fuel: diesel, Equipment: ABS, air conditioning, airbag, central locking, cruise control, immobilizer system, navigation system, onboard computer, parking sensors, power assisted steering, seat heater, sliding door, soot filter, traction control, E07 Hill Start Assist, FR8 Rear View Camera, EY5 Mercedes-Benz Emergency Call System, EY6 Breakdown Management, G43 9G-TRONIC automatic transmission, JK3 Instrument Cluster with Pixel-Matrix Display, V23 Interior trim premium version, RS7 Steel wheels 6.5 J x 17, EA4 Audio 40, EZ5 Park Package, SE5 Lumbar support driver’s seat, SE4 Lumbar support passenger seat, XO9 Mercedes-Benz MobiloVan with DSB and GgD, T70 Child safety locks on passenger compartment doors, ZC5 Sales code 0, T74 Grab handle for entry, T75 Grab handles for driver and passenger entry, CF7 Comfort suspension, UR3 Rear seat mounting with quick release for 2 seat rows, W54 Split rear doors opening to the side wall, HH9 Semi-automatic TEMPMATIC climate control, V36 Roof lining, E1D Digital radio (DAB), Y10 First aid kit, MJ8 ECO Start/Stop function, IB6 Model series C447 Vito/V-Class, RD8 Full wheel covers, H00 Warm air duct to passenger compartment, MS1 Cruise control, HI1 Climate zone 1 (cold/comfort), V41 TPO plastic floor in passenger compartment, RM1 M+S tires, Z42 Registration as passenger car, LA2 Automatic headlight control, C70 Pedestrian protection, HZ0 Electric auxiliary heater, ZM4 Combi vehicle, E34 Buffer battery for start process, J55 Seat belt warning for passenger seat, XA5 Weight variant 3,200 kg, EL8 2-way loudspeakers front, L16 Halogen fog lights, ED4 AGM battery 12 V 92 Ah, JF1 Rain sensor, T14 Active door catch for sliding door, VV9 Mounting points in roof frame, W78 Rear hatch window with wiper and wash system, RF1 Continental tires (10), SH2 Thorax-Pelvis side airbag passenger. We are happy to provide you with a customized financing or leasing offer and take your used vehicle in part exchange. We look forward to welcoming you to our dealership for further consultation. Vehicle condition in accordance with age/mileage; minor touch-ups as part of vehicle preparation have been carried out. No liability for printing or typographical errors. Subject to errors and prior sale ... more on our homepage. Cgedpfxoyrbv No Aireu

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, grinding length: 1,000 mm, grinding width: 600 mm, Perfect PFG60100AHR surface grinder year of manufacture: 2005 magnetic table: 1000 x 600 mm max. grinding area: 1000 x 600 mm variable magnetic force automatic feed coolant/filter tank Cgjdpezbrpfjfx Airsu 5 grinding wheels and various grinding stones documentation machine is powered on for inspection

Condition: refurbished (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 019.3790, Machine undergoing repair/overhaul = estimated delivery time approximately 8-10 weeks. Csdpezbqzasfx Airsgu Technical data + accessories, see separate PDF.

Condition: reconditioned (used), Year of construction: 2021, operating hours: 980 h, functionality: fully functional, total width: 2,500 mm, overall weight: 19,000 kg, power: 280.23 kW (381.01 HP), year of last overhaul: 2025, VZ 850 DK, Volvo Penta TAD16, 770 hp, 3300 operating hours - Conveyor belt in new condition, rollers renewed - Shredding shafts 7/7-5, made of metal - Crushing bar with comb Cgjdew S Iiiopfx Airou - Counter comb in new condition - Two hoppers - Long discharge conveyor - CAT engine C9.3 - Emissions standard EPA Tier 4 final - Only 980 operating hours

Condition: new, :Omicron CNC 3206 | Omicron CNC 3210 grinding diameter:315 mm grinding length:600|1000 mm centre height:160 mm swing over bed:315 mm max. workpiece weight:120 kg grinding headstock:_____ __ grinding wheel size:450 x127 x min.20-max.50 mm grinding spindle speed:600-1600 (stufenlos) 1/min feed per revolution of handwheel:0,001/ 0,01 / 0,1 mm grinding head swivellable +/-:±180 ° automatic feeds:0,2-3000 mm/min workhead:_____ __ workhead - spindle speed:0-600 (stufenlos) 1/min swiveling workpiece drive:±90 ° workhead - center taper:4 MK tailstock:_____ __ tailstock quill adjustment:50 mm tailstock quill diameter:70 mm taper in tailstock:4 MK table:_____ __ table speeds:1-5000 mm/min swivellable angle of table:+9°/-5° | +8°/-4° ° table adjustment - longitudinal:680|1080 mm motors:_____ __ Cgedsd Ed S Ispfx Aireu grinding wheel motor:4 kW workhead motor:0,75 kW hydraulic motor:0,75 kW coolant pump:0,18 kW machine dimensions:_____ __ weight of the machine ca.:3700 | 4900 kg Machine size (LxWxH):2900x1350x1750 | 3700x1350x1900 mm CNC controller:Siemens 840 dsl complete cooling system:mit Auffangbecken für Kühlmittel Scales:X-Achse ball screw in axes:X und Z :montiert auf dem Reitstock (ohne Diamant) Telescope cover for guideways:für den Tisch aus Stoff machine lubrication:5l für die Schleifspindel hydraulic unit:zur Steuerung des Reitstockpinolenhubs

Condition: used, Year of construction: 1980, functionality: fully functional, grinding length: 5,000 mm, grinding wheel diameter: 750 mm, grinding diameter: 580 mm, workpiece weight between centers: 4,000 g, Used Gioria RU/S 5000 External Cylindrical Grinding Machine – High-Precision Grinding Technology for Large Parts Available from August 2025 – Viewing under power possible! This robust and precise Gioria RU/S 5000 external cylindrical grinding machine was developed for machining workpieces up to 5,000 mm long and 4,000 kg in weight. With its hydrostatic grinding spindle bearings and a powerful 20 kW drive, it offers the highest precision and excellent grinding results – ideal for use in heavy-duty machining and the production of high-precision components. Cgedpfev Tnhwox Airsu 🔹 Key Features: ✔ Max. grinding diameter: 580 mm ✔ Grinding length: 5,000 mm ✔ Workpiece weight: up to 4,000 kg ✔ Hydrostatic grinding spindle bearings for vibration-free operation ✔ Large grinding wheel diameter 750 mm for efficient material removal ✔ Continuously adjustable workpiece spindle speed (10–180 rpm) for optimal adaptation to different workpieces ✔ Hydraulic table drive (0.05–4.0 m/min) for precise longitudinal movements ✔ Digital display for the X-axis for exact feed Powerful features for maximum efficiency The machine is equipped with extensive accessories, including: ✅ Coolant cleaning system with paper belt filter (tank capacity: 450 liters) ✅ 6 grinding wheel holders for flexible machining options ✅ 8 steady rests for stable workpiece guidance during long machining operations Components ✅ Dressing device positioned on the tailstock for precise dressing of the grinding wheel Ready for immediate use – viewing available in Stuttgart! This machine is currently still live and can be demonstrated. Further data: Center height 300 mm Center width 5000 mm Max. workpiece diameter 580 mm Max. workpiece diameter with steady rest 30 – 400 mm Max. workpiece weight between centers 4000 kg Machine taper in the workhead: MT 6 Machine taper in the tailstock: MT 6 Operating voltage 400 V/ 50 Hz Machine weight approx. 20,000 kg Space requirement approx. 13 x 3.5 m Grinding wheel headstock Grinding spindle drive 20 kW Hydrostatic grinding spindle bearing Grinding wheel, max. 750 x 100 x 305 mm Grinding wheel peripheral speed, max. 1 – 34 m/sec. (for wheels Ø 750 mm) Workhead Speed range, continuously adjustable 10-180 rpm MT 6 taper chuck Swivel range +/- 45 degrees Worktable Hydraulic table drive – continuously adjustable 0.05 – 4.0 m/min Worktable swivel range +/- 4 degrees Tailstock Hydraulic quill stroke Quill stroke 90 mm MT 6 center chuck Dressing device positioned on the tailstock Coolant purification system Coolant tank with pressure pump and paper belt filter Tank capacity 450 liters 📍 Delivery: Free on truck from site 📅 Available from August 2025 ⚙ Warranty: None, as this is a used machine Take advantage of this opportunity to acquire a high-quality cylindrical grinding machine for your production. Perfect for large and heavy workpieces – secure this machine now for precise grinding at the highest level!

Condition: used, Year of construction: 2000, functionality: fully functional, Used Cylindrical Grinding Machine Reckord M 1432 B The Reckord M 1432 B is a high-performance universal cylindrical grinding machine that combines maximum precision with robust construction. With a minimum infeed setting of just 0.0025 mm and outstanding roundness accuracy, it is ideal for demanding grinding tasks in both single-part and series production. Your advantages at a glance: Maximum precision: Minimum grinding wheel infeed of 0.0025 mm ensures top surface finishes and form accuracy. Exceptional flexibility: External, internal, and face grinding – swiveling workhead (+90° / -30°) and table (+3° / -6°) for tapers and complex geometries. Robust construction: Heavy-duty machine bed weighing approx. 4,000 kg for maximum rigidity and vibration damping. Powerful drive: 4 kW grinding wheel motor for rapid stock removal and short machining times. Ergonomic operation: Clearly arranged controls for rapid operator familiarization and intuitive handling. Technical Data Manufacturer: Reckord Model: M 1432 B (Model 1000) Type: Universal cylindrical grinding machine Cgodpfxeyxgldj Airsu Centre height: 180 mm Max. grinding length: 1000 mm Max. grinding diameter: 315 mm Max. workpiece weight: 150 kg Workhead speeds: 40, 72, 128, 228 rpm Grinding wheel dimensions: 400 x 50 x 203 mm Grinding motor output: 4 kW Total power consumption: 7.8 kW Machine weight: approx. 4,000 kg Machine dimensions (L x W x H): 3240 x 1760 x 1680 mm Colour: Blue (as existing) Condition: Used, fully checked and operational Availability: Immediately ex stock Stockstadt Additional Information Scope of delivery: Cylindrical grinding machine Reckord M 1432 B including standard accessories as per the operating manual. Fully checked and operational. Technical documentation: Supplied in German. Optional services: Commissioning and training by experienced technicians, maintenance contract, as well as financing and leasing options on request. Inspection: The machine can be inspected by appointment in Stockstadt am Rhein.

Condition: used, grinding length:650 mm grinding width:450 mm workpiece height:425 (ohne Magnetplatte) mm max. workpiece weight:600 kg weight of the machine ca.:3,8 t total power requirement:15 kW machine dimensions approx. WxHxD:3,0 x 2,4 x 2,3 m Used/reconditioned surface grinding machine, make GER, type RSA-650. Automatic infeed in all 3 axes. Machine geometrically overhauled, repainted (RAL6011, green), all functions tested, accuracy checked. OVERHAUL SCOPE: Machine completely disassembled, all components thoroughly cleaned and tested for complete functionality. Main spindle newly mounted, concentricity 3 µ. All guideways newly scraped in new machine geometry. Wear parts replaced, defective components repaired or replaced. Reassembly, complete functional test and internal acceptance. Machine repainted. Machine in perfect condition, ready for production. Codpfx Aijfkg H Torogu MEASURED GEOMETRIC ACCURACIES: Actual geometric accuracy after overhaul, measurement with dial gauge. Geometry of machine axes X and Z X = longitudinal axis 650 mm Z = transverse axis 450 mm Measurement magnet traversed with dial gauge. X axis = Max. Deviation 0,008 mm Z axis = Max. Deviation 0,005 mm INCL. THE FOLLOWING ACCESSORIES: -Electro-magnetic clamping plate, with fine longitudinal pole pitch. dimensions 600 x 400mm -demagnetizing device -Complete coolant device with paper band filter - Digital display of the vertical axis (Y-axis), make Sony -Technical documentation in English language -1 pieces grinding wheel holders -1 piece grinding wheel dresser, mounted above the grinding wheel with manual infeed and automatic (hydraulically operated) transverse movement - 1 set of setting elements You can find more information in the attachment. Payment: 100% before loading the machine Warranty: 6 months on the geometry and the new parts demonstrably installed. No general legal warranty.

Year of construction: 2022, condition: new, grinding diameter:260 mm grinding length:1000 mm centre height:130 mm dimensions of grinding wheel:400x60x127 mm grinding wheel speeds:1700,1900,2200 U/min grinding head swivelling:+/- 30 Grad table swivelling +/-:9 Grad Tailstock spindle taper:4 MK grinding wheel motor:4 kW hydraulic motor:1,5 kW work piece motor:0,37 kW net weight:2400 kg gross weight:2950 kg PLC control:Siemens S7 tailstock sleeve movement:pneumatic, via foot padel operating panel:New Rittal operating panel with touchscreen screen from Siemens centers sleeves:2 grinding wheel flange:2 unused cylindrical grinding machine, manufactured by ABA type URS 400 Year, 2009 Cgsdpfeg N Nh Djx Airju Further technical data, and standard and optional equipment, as defined in Appendix. Payment: 100% before loading of the machine Warranty: no

Year of construction: 1966, condition: used, machine/vehicle number: 12485, grinding diameter:350 mm grinding length:2500 mm centre height:180 mm Cjdpsi E Ix Nsfx Airsgu total power requirement:5,5 kW weight of the machine ca.:5,5 t

Condition: new, Experience unparalleled precision and performance with ROBBI's range of cylindrical grinding machines. Our machines offer grinding lengths starting from 2000mm and are available in semi-automatic and CNC versions. With a grinding diameter range of 300-1000mm, the possibilities are endless. Partly available from stock! Discover our extensive range of optional accessories that make our cylindrical grinding machines even more versatile. Whether it's for complex workpieces or demanding tasks, our machines always deliver the best results. With ROBBI's years of experience, trust us to optimize your machining processes. Invest in quality and precision - contact us today! MAIN TECHNICAL DATA: Model: Omicron CNC 80 Grinding diameter: 795/895/955 mm Grinding length: 3000-6000 mm Center height: 400/450/500 mm Center distance: 3000-6000 mm Swing over bed: 795/895/955 mm Max. workpiece weight between centers: 4 t Additional technical data in the appendix MAIN TECHNICAL DATA: Model: Omicron CNC 60 Grinding diameter: 595/695 mm Grinding length: 1000-3000 mm Center height: 300/350 mm Center distance: 1150-3150 mm Swing over bed: 600/700 mm Max. workpiece weight between centers: 1200 kg Additional technical data available on request or in the appendix MAIN TECHNICAL DATA: Model: Omicron CNC 36 Cgedpfx Aietximvoreu Grinding diameter: 355/455 mm Grinding length: 630-2030 mm Center height: 180/230 mm Swing over bed: 355/455 mm Max. workpiece weight: 250 (300 opt.) kg Additional technical data available on request or in the appendix ACCESSORIES (EXAMPLE FOR OMICRON CNC 80) CNC control: Siemens 840D Glass scales: in the X-axis Coolant system: with coolant collection tray Grinding wheel dresser: mounted on the tailstock (without diamond) Telescopic cover: for the table made of fabric Machine oil: 5l for the spindle Frequency converter: for spindle motor and workpiece drive (stepless) Hydraulic unit: for controlling the tailstock quill Ball screw in the axes: X and Z Optimized cycle with geometric and process parameters - The CNC grinding machines meet the production requirements for medium-sized workpieces. - The machines are equipped with the latest generation SIEMENS 840Di sl system. - The machine can be equipped with automatic measuring systems. - It is possible to design the grinding wheel for geometries specifically created for the required type of production. - High-precision machining can be performed when the grinding machines are equipped with a third interpolated axis and specially designed software. EASY PROGRAMMING Complex programs can be created without the need for ISO programming knowledge. The input of parameters is facilitated by a series of messages and characters that explain the meaning of the various parameters step by step. The programming of work cycles is done by entering the same parameters of the cycle. The sequence of execution of the various cycles can be quickly and intuitively changed. By the way, in addition to affordable new machines and tested used machines, you can expect even more from us: • Consultation and problem-solving at your location • Organization of machine transport to your facility • Installation, commissioning, and turnkey delivery, and more.

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, grinding length: 500 mm, grinding width: 250 mm, Young, like-new demonstration machine: High-precision surface grinding machine, "Optimal" series, available at a special net price. Grinding area: 500 x 250 mm Features: ● Surface grinding machine with automatic vertical feed ● Grinding sequence: roughing – finishing – spark-out ● Siemens S700 touchscreen panel and electronic handwheel for Y-axis ● Digital display for vertical axis Y and cross axis Z ● Table cover and splash guards in stainless steel design ● Electrical cabinet fitted predominantly with Siemens components ● Includes manual dressing device, electro-magnetic chuck, and coolant filtration system Cgodpfx Aieyak Dlerou Main technical data: Grinding length mm 500 Grinding width mm 250 Distance table surface to spindle center mm 450 Table drive Hydraulic Table load kg 180 Longitudinal movement X Table speed, steplessly adjustable m/min 7 – 23 Max. longitudinal travel mm 560 Cross movement Z Max. travel speed mm/min 990 Max. cross travel mm 275 Vertical movement Y Max. travel speed mm/min 460 Grinding spindle / Grinding wheel Spindle power kW 2.2 Wheel dimensions mm 200x20x31.75 Spindle speed (speed control optional) min⁻¹ 2850 Dimensions Machine weight (net) kg 1800 Machine dimensions (inc. reciprocation) Width mm 2300 Depth mm 1650 Height mm 1680 Power connection kW 3.7 All model series include standard accessories: ● 1 standard grinding wheel ● 1 wheel flange ● 1 dressing block with diamond ● 1 balancing arbor ● 1 balancing stand ● 1 machine lamp ● 1 set of machine tools ● 1 set of documentation with spare part list ● Machine in CE-conform (metric version) Precision and surface quality at optimal price. Fully equipped for universal use in a wide range of industrial and application areas. Machine comes with a 12-month parts warranty. By the way, aside from affordable new and certified used machines, we offer even more: • On-site consultation and solution finding • Organization of machine transport to your facility • Installation, commissioning, and turnkey handover • Spare parts supply • Control training for Siemens, Heidenhain, and Fanuc • Trained service staff available in your area and more • 24/7 telephone support • Tax-optimized trade-in of your old machine • Attractive financing options, even without down payment

Condition: excellent (used), Year of construction: 1988, functionality: fully functional, machine/vehicle number: 1, center height: 150 mm, center width: 480 mm, grinding diameter: 299 mm, New arrival 1 Hydraulic Universal External and Internal Cylindrical Grinding Machine TSCHUDIN HTG 410 U – Year 1988, partial overhaul in 2026 – 150 mm center height x 480 mm center distance – workpiece spindle head MK 5 with stepless speed adjustment. Cgjdpjvdumbsfx Airou Grinding wheel left and right – swiveling internal grinding attachment with 18,000 RPM Machine equipped with four-axis digital readout – X-axis – Y-axis and rotary encoder with one-micron resolution when swiveling the universal grinding spindle head and workpiece spindle head! Pneumatic air cushion lifting for effortless swiveling of workpiece spindle head and grinding spindle head. Machine includes four-jaw chuck, halogen lamp, paper band filter, folding dresser, and balancing arbor. Guideways in X-axis newly scraped – machine thoroughly inspected by specialist. Automatic cycle with "rapid traverse to automatic infeed – dwell time – retraction – infeed dimension remains set". Very little used machine from prototype manufacturing! Price on request (Domestic sales plus 19% VAT.) Technical data not binding – subject to prior sale and errors. Best regards, INDUBA GmbH Mathias Becker D-78628 Rottweil

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, grinding length: 700 mm, grinding width: 450 mm, NEW ARRIVAL 1 used hydraulic surface grinding machine GEIBEL & HOTZ FS 6040 The grinding area of the G & H FS 6040 is 600 x 450 mm - Year 2000 - Machine with automatic program cycle - rough grinding - finish grinding - spark out - return to starting position. Machine with 2-axis digital readout - stainless steel coolant system - various flanges - fine pole pitch magnetic chuck - including flanges suitable for Jung HF/JF 520. Machine complete with operating manual and wiring diagram - fully tested for functionality. Very little used machine from a test department (original paint). Pricing: ex stock, unpacked, uninsured, domestic sales plus VAT. Cgjdpfxevz A Dce Airsu Delivery time: immediate - subject to prior sale. Payment: as per usual trade terms - before collection - immediately after receipt of invoice. Best regards, Induba GmbH Mathias Becker

Condition: excellent (used), Year of construction: 1988, travel distance X-axis: 400 mm, travel distance Y-axis: 200 mm, AVAILABLE SOON! VERY WELL-PRESERVED COORDINATE GRINDING MACHINE HAUSER S 3 - YOM 1988 Table travel 400 x 200 mm Machine in excellent condition with an unusually extensive range of accessories. Cgedpfx Aisv Amy Dsrou Rotary table can be rotated via handwheel or freely. High-precision universal table - rotatable, swiveling, and tilting Swivel range 90° - Angle of rotation readout in 5 seconds - Several grinding motors and various turbines up to 200,000 rpm with corresponding collets. Automatic feed along the U-axis with separate MY digital display Machine wiring (heating) for constant machine temperature Coolant system with splash guard Acoustic & optical proximity monitoring with headphones Centering microscope Halogen lamp Centering devices with MY clocks Hydraulic clamping of the X and Y axes Automatic central lubrication Complete documentation with circuit diagrams, etc. Machine costs less than the accessories new! Technical data is non-binding - errors excepted. Pricing: ex stock, unpacked, uninsured. Delivery time: immediately - subject to prior sale. Payment: as usual - before removal - immediately upon receipt of invoice.

Condition: excellent (used), Year of construction: 1988, functionality: fully functional, New arrival Hydraulic surface grinding machine Z&B Ziersch FS 2045 T, year 1988 Cjdpfek Ufz Nsx Airsgu Grinding range 500 x 200 mm – vertical feed – micrometer feed – electronic handwheel – automatic feed – digital readout. Automatic cross feed, both continuous and intermittent, micro-fine cross adjustment – magnetic chuck with demagnetization. Hydraulic overhead dresser – leveling feet – machine has been fully checked – all functions available – runs very smoothly! Electrical circuit diagram available. Pricing: ex stock – subject to prior sale and errors.

Condition: excellent (used), Year of construction: 2005, machine/vehicle number: 1, grinding length: 1,000 mm, grinding width: 600 mm, Geibel & Hotz FS 1050 SD horizontal surface grinder Grinding area 1000 x 600 mm Fine pole pitch of the magnetic plate Many flanges and discs Large paper belt filter Adjustable feet Blade and circuit diagram Balancing scale Machine was in use a maximum of 2 days a week - Not a standard machine Pricing: ex-works - unpacked - uninsured Delivery time: immediately - subject to prior sale Csdov U Dfujpfx Airegu Errors excepted - technical data is non-binding

Condition: excellent (used), Catalog number 7805 TECHNICAL DATA - Track width: 340 mm - Roller width: 340 mm - Disc arbor diameter: 80 mm - Installed discs on upper shaft: 350 mm - Installed discs on lower shaft: 300 mm - Max cutting height: 200 mm Cjdjzadatjpfx Airegu - Min length of processed material: 700 mm – From above - 2 rows of kickback fingers - Smooth, slip, pressure shaft - Kickback fingers - 2 smooth, slip, pressure shafts - Saw shaft - 3 smooth pressure rollers – From below - Track conveyor - Saw shaft - Track conveyor - Infinitely variable feed speed adjustment - Main motors: 2 x approx. 55 kW - Feed motor: 3 kW - Electric up/down elevation of the main body - Manual adjustment of saw shafts - Central lubrication - Extraction port diameter: 2 x 200 mm - Dimensions (L/W/H): 2700 x 1800 x 2150 mm - Weight: approx. 5,000 kg ADVANTAGES – German-made – Double-shaft design – 2 x 55 kW motors – Used multi-blade saw, in very good condition Net price: 178,900 PLN Net price: 42,590 EUR (at 4.2 EUR exchange rate) (Prices subject to change with significant rate fluctuations)