Used Cable Label for sale (4,882)

Condition: ready for operation (used), Year of construction: 2012, Rated output: 5000bottles/h, running direction: LM, control range: 1000-6500bottles/h, bottle material: PET/glass, bottle format volume: 200ml/250ml/400ml/500ml/750ml/1000ml/1200ml, glass bottle height range: 59mm-121mm, glass bottle diameter: 65mm/70mm, application: neck ring label/body label/back label/wraparound label. Including three self-adhesive dispensers, height adjustment, central lubrication, breakage detection, bottle counter, clamp stars, swivel arm and Etima hot glue for Rollina and neck ring. Documentation available. An on-site inspection is possible. Nodpfsy N Dd Sox Ad Sjlc

Condition: ready for operation (used), Year of construction: 2021, A Gernep cold glue labeling machine that has been used in the brewery industry is available. Rated capacity: 5000bottles/h, direction of operation: LM, control range: 1000-6000bottles/h, glue application height: 330mm, bottle material: glass, bottle volume: 330ml/500ml, min. label length range: 25mm-130mm, max. label height: 130mm, max. label height lower edge/upper edge: 15mm/320mm, application: swing-top label/body label. Including cold glue unit, prepared wet glue unit, date coding, height adjustment, overload clutch, infeed and outfeed tunnel and foot extension with floor plate. Documentation available. An on-site inspection is possible. Expected to be available from the end of May 2026. Nljdpfx Ajy N Dfiod Sjc

Condition: ready for operation (used), Year of construction: 2019, A cold-glue labeling machine Gernep, which was used in the food industry, is available. Nominal output: 10000bottles/h, running direction: LM, control range: 2000-12000bottles/h, gluing height 1/2: 330mm/230mm, bottle format height 1/2: 307mm/260mm, bottle format diameter 1/2: 90mm/68mm, bottle material: glass, bottle type: VDF/NRW, bottle volume: 1000ml/500ml, application: body label/neck label/back label, container condition: hot. Cold-glue format 1: label length range: 25mm-140mm, max. label height: 150mm, label height lower edge/upper edge: 15mm/320mm. Cold-glue format 2: label length range: 25mm-140mm, max. label height: 150mm, label height lower edge/upper edge: 15mm/220mm. Including two cold-glue units, dating, sensor label inspection, breakage detection, overload clutch, additional accumulation switch and center slide. Documentation available. An on-site inspection is possible. Nledpey N Dfpsfx Ad Soc

Condition: used, mileage: 61,904 km, power: 243 kW (330.39 HP), first registration: 01/2017, fuel type: diesel, tire size: 385/65R22.5, axle configuration: 6x2, wheelbase: 4,900 mm, fuel: diesel, color: red, gearing type: automatic, emission class: euro6, suspension: steel-air, total length: 8,830 mm, total width: 2,550 mm, Year of construction: 2017, Equipment: crane, Volvo FMX 330 6x2 Liftable steering axle. Nodpfx Asy Nyz Hed Selc Euro 6. Crane: Hiab 144 E-2 PRO Year 2008 2 x hydraulic extensions. Rotator + 6th function. Container system: VDL 25,000 kg Hydraulic folding rear underrun protection. = Further Information = Technical details Number of cylinders: 6 Axle configuration Brakes: Disc brakes Front axle: Tyre size: 385/65R22.5; Steerable; Tyre tread left: 70%; Tyre tread right: 70%; Suspension: Leaf spring Rear axle 1: Tyre size: 315/70R22.5; Tyre tread left: 80%; Tyre tread right: 80%; Suspension: Air suspension Rear axle 2: Tyre size: 315/70R22.5; Steerable; Tyre tread left: 80%; Tyre tread right: 80%; Suspension: Air suspension Weights Unladen weight: 13,150 kg Payload: 14,850 kg Gross vehicle weight: 28,000 kg Functional Crane: Hiab Maintenance APK (periodic technical inspection): valid until 01/2027 Financial information Price: On request Identification Type number: FMX 330 6x2*4 / HIAB CRANE = Company Information = ALL PRICES ARE NET FOR EXPORT. Joris Versteijnen (NL-DE-EN), Wouter Greutink (NL-DE-EN-ES-IT). We speak Russian. We strive to provide accurate information; however, no rights can be derived from the information provided.

Condition: excellent (used), mileage: 209,020 km, power: 390 kW (530.25 HP), first registration: 11/2020, fuel type: diesel, tire size: 385/65/22.5, axle configuration: 8x2, wheelbase: 5,300 mm, fuel: diesel, brakes: engine braking, color: yellow, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: other, total length: 6,000 mm, total width: 2,460 mm, permissible axle load (axle 1): 8,000 kg, permissible axle load (axle 2): 8,000 kg, permissible axle load (axle 3): 11,500 kg, Year of construction: 2020, Equipment: ABS, air conditioning, central locking, crane, cruise control, differential lock, electric window regulation, fog lights, power mirror, soot filter, trailer coupling, = Additional options and equipment = - Aluminum fuel tank - Brake booster - High beam headlights - Speed limiter - Refrigerator - Air suspension - Particulate filter - Rearview camera - Sun visor - Toolbox - Power take-off (PTO) - Central lubrication system - Towing jaw Nsdpjyiun Tefx Ad Sjlc = Further information = Technical specifications Number of cylinders: 6 Engine displacement: 12,809 cc Axle configuration Brakes: Disc brakes Front axle 1: Tyre size: 385/65/22.5; Max. axle load: 8,000 kg; Steered; Suspension: Leaf spring Front axle 2: Tyre size: 385/65/22.5; Max. axle load: 8,000 kg; Steered; Suspension: Leaf spring Rear axle 1: Tyre size: 315/80/22.5; Twin tyres; Differential lock; Max. axle load: 11,500 kg; Suspension: Air suspension Rear axle 2: Tyre size: 385/65/22.5; Lift axle; Max. axle load: 7,500 kg; Steered; Suspension: Air suspension Weights Unladen weight: 16,545 kg Payload: 15,455 kg Gross vehicle weight (GVW): 32,000 kg Functional Lifting capacity: 5,330 kg Lifting height: 1,460 cm Crane: HMF 2820, year of manufacture: 2020, mounted behind the cab Condition Technical condition: Very good Optical condition: Very good MERCEDES-BENZ AROCS 3253 L ENA 8X2/4 HMF2820 CRANE WITH TF.324 CABLE SYSTEM EURO 6 530 HP DRIVELINE ENA 8X2/4, 4TH AXLE LIFTED/STEERED TECHNICAL PERMISSIBLE GROSS VEHICLE WEIGHT (GVW) 35,000 KG WHEELBASE 530 CM DAY CAB WITH AIR CONDITIONING 27MC, REFRIGERATOR BOX REARVIEW CAMERA AUTOMATIC TRANSMISSION TRAILER COUPLING FOG LIGHTS HMF2820 K5 POWER-OPERATED CRANE MAX. LIFTING HEIGHT 14.6 M MAX. LIFTING CAPACITY AT 4.6 M: 5,330 KG MAX. LIFTING CAPACITY AT 14.7 M: 1,410 KG 5-6 FUNCTION HMF TF.324 CABLE SYSTEM LOADING LENGTH: 600 CM, WIDTH: 246 CM 2 X SIDE BOARDS WITH HYDRAULIC CONTROL

Condition: good (used), mileage: 674,169 km, power: 324 kW (440.52 HP), first registration: 05/2007, fuel type: diesel, axle configuration: 8x2, wheelbase: 6,700 mm, fuel: diesel, brakes: engine braking, color: blue, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro4, total length: 9,400 mm, total width: 2,520 mm, Year of construction: 2007, Equipment: EBS, air conditioning, crane, power mirror, trailer coupling, = Additional options and accessories = - Additional steering axle - Air suspension system - Cabin - Enhanced engine brake - Gullet - Power take-off (PTO) - PTO - Rear view camera - Refridgerator - Sun visor - Toolbox = More information = Technical information Number of cylinders: 6 Engine capacity: 10.518 cc Axle configuration Front axle 1: Steering; Tyre profile left: 50%; Tyre profile right: 50% Front axle 2: Steering; Tyre profile left: 50%; Tyre profile right: 50% Rear axle 1: Tyre profile left: 50%; Tyre profile right: 50% Rear axle 2: Lift axle; Tyre profile left: 50%; Tyre profile right: 50% Weights Empty weight: 17.970 kg Carrying capacity: 19.030 kg GVW: 37.000 kg Functional Crane: Hiab 377 EP-5 HIPRO, behind the cab Condition Technical condition: good Visual appearance: good Financial information Price: On request Identification Registration number: BS-ZF-60 = Dealer information = We do not charge delivery costs. All trade-ins and financing are possible. Although we take great care in preparing our advertisements, it is possible that some of the options described may or may not be present on the car. Please check before purchasing that all the options described that are important to you are actually present. We are RDW certified. You can opt for an extended warranty; see our website for the packages. All our cars have a clear maintenance history and mileage registration. Our opening hours are: Monday to Friday from 9:00 a.m. to 5:00 p.m. and evenings by appointment. Saturday from 9:00 a.m. to 3:00 p.m. You can find us at: Middelingenseweg 22 5321 JH Hedel The Netherlands And reach us at: Trucks: Passenger cars: Website: Email: Njdeydci Uopfx Ad Sslc

Condition: good (used), mileage: 682,482 km, power: 390 kW (530.25 HP), first registration: 01/2019, fuel type: diesel, axle configuration: 6x2, wheelbase: 6,450 mm, fuel: diesel, color: blue, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro6, total length: 8,900 mm, total width: 2,500 mm, Year of construction: 2019, Equipment: ABS, air conditioning, navigation system, parking heater, trailer coupling, = Additional options and accessories = - Air horn - Air suspension - Aluminum fuel tank - Gullet - Power take-off (PTO) - PTO - Radio/Cassette player - Refridgerator - Sleeping cabin - Speed limiter - Sun visor = More information = Technical information Number of cylinders: 6 Engine capacity: 12.902 cc Axle configuration Front axle: Tyre profile left: 50%; Tyre profile right: 50% Rear axle 1: Tyre profile left: 50%; Tyre profile right: 50% Rear axle 2: Lift axle; Tyre profile left: 50%; Tyre profile right: 50% Weights Empty weight: 12.385 kg Carrying capacity: 15.615 kg GVW: 28.000 kg Condition Technical condition: good Visual appearance: good Financial information Price: On request Identification Registration number: 43-BLT-6 = Dealer information = We do not charge delivery costs. All trade-ins and financing are possible. Although we take great care in preparing our advertisements, it is possible that some of the options described may or may not be present on the car. Please check before purchasing that all the options described that are important to you are actually present. We are RDW certified. You can opt for an extended warranty; see our website for the packages. All our cars have a clear maintenance history and mileage registration. Our opening hours are: Monday to Friday from 9:00 a.m. to 5:00 p.m. and evenings by appointment. Saturday from 9:00 a.m. to 3:00 p.m. You can find us at: Middelingenseweg 22 5321 JH Hedel The Netherlands And reach us at: Trucks: Passenger cars: Nedpjydciujfx Ad Selc Website: Email:

Condition: new, Various metal cable trays and cable ducts. Ranging from small up to a maximum duct width of 600mm. Manufactured by Rico, all unused. Target price: half of their regular purchase price. Nlsdpfx Aoy Nabgsd Sjc

Condition: good (used), Cable rack for large cable reels Consisting of 7 uprights Nsdpfxjy I U Tbj Ad Solc Depth: 0.81 m Bays: 0.75 + 0.75 + 0.855 + 0.855 + 0.945 + 1.05 + 1.05 m width – upright width: 8 x 0.10 m Height: 5.06 m

Year of construction: 2003, condition: ready for operation (used), Automatic labeler with vacuumbelt Al-tech Nledpfx Ajinh Thjd Sec model Alline Build 2003 posibillity for 1 or 2 labels or wrap arround max container size 100mm max label height 150mm machine is tested and in good working order video on request by whats-app

Condition: used, Year of construction: 1990, functionality: fully functional, total width: 1,000 mm, total length: 2,300 mm, total height: 1,750 mm, type of input current: three-phase, label length: 500 mm, input voltage: 400 V, Horizontal roll trough labeler for cans Nljdpfxor Izigj Ad Soc hot melt pick up with cold end glue-ing up to 153mm diameter label length from 240 to 500mm Capacity up to 8.000can/hr depending on label size dimensions 2300x1000x1750 LxWxH Frame: Steel Electric : 380 Volt - 50 Hz - 1,75 kW Press air : 6 bar Features: on / off switch with thermal overload protection Adjustable label storage roll on unit

Condition: good (used), Year of construction: 2008, functionality: fully functional, total width: 1,600 mm, total length: 4,400 mm, total height: 1,540 mm, type of input current: three-phase, Labeling machine for round containers, spot or wrap around. 1 label station, max label height 130mm. Roll-on unit 80mm height. Push plate 120mm height. Machine is tested and in working order. Njdpfoxnk Ifsx Ad Sslc

Year of construction: 2001, condition: like new (used), Etipack Model: SIST.1 FLEXO (EMC DX head) Direction: Left-Right Nodpfefzknvjx Ad Solc Type: Labeller for self-adhesive labels Serial number: A1A357R1-1 Year of manufacture: 2001 Dimensions: L x W x H = 2,600 x 1,400 x 1,250 mm Conveyor length: 2,600 mm Conveyor width: 110 mm (Belt) Press-on belt height: 90 mm Weight: 400 kg Electrical: 230 Volt – 50 Hz – 200 Watt Features: Machine suitable for round and conical wrap-around applications Machine has been technically inspected Conveyor intermittently driven

Condition: excellent (used), mileage: 372,943 km, power: 315 kW (428.28 HP), first registration: 01/2018, fuel type: diesel, tire size: 385/65/22.5, axle configuration: 8x4, wheelbase: 4,850 mm, fuel: diesel, fuel tank capacity: 470 l, brakes: engine braking, color: red, driver cabin: day cab, gearing type: automatic, number of gears: 12, emission class: euro6, total length: 8,800 mm, total width: 2,550 mm, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 13,000 kg, Year of construction: 2018, Equipment: ABS, air conditioning, central locking, cruise control, differential lock, electric window regulation, parking air conditioner, power mirror, soot filter, trailer coupling, = Additional Options and Equipment = - Aluminum fuel tank - Leaf suspension - Brake booster - Speed limiter - Parabolic suspension - Particulate filter - Reversing camera - Sun visor - Toolbox - Power take-off (PTO) - Central lubrication - Towing eye = Further Information = Technical Specifications Number of cylinders: 6 Engine displacement: 10,677 cc Axle configuration Front axle 1: Tire size: 385/65/22.5; Max. axle load: 9,000 kg; Steering Front axle 2: Tire size: 385/65/22.5; Max. axle load: 9,000 kg; Steering Rear axle 1: Tire size: 315/80/22.5; Dual wheels; Differential lock; Max. axle load: 13,000 kg Rear axle 2: Tire size: 315/80/22.5; Dual wheels; Differential lock; Max. axle load: 13,000 kg Weights Empty weight: 14,110 kg Payload: 29,890 kg Gross vehicle weight: 44,000 kg Functional Body manufacturer: VDL S-30-6600 Condition Technical condition: very good Visual condition: very good Nljdpfx Ajwhprxed Soc Identification Registration number: 79-BKH-9 MERCEDES-BENZ AROCS 8X4 VDL S-30-6600 HOOKLIFT EURO 6 430 HP 8X4 DRIVE WHEELBASE 485 CM FULL LEAF SPRING SUSPENSION DIFFERENTIAL LOCK AUTOMATIC TRANSMISSION WITH ENGINE BRAKE TRAILER COUPLING VDL S-30-6600 HOOKLIFT HYDRAULIC CONTAINER LOCKING TOOLBOX FOLLOW US ON INSTAGRAM, FACEBOOK AND TIKTOK TO SEE VIDEOS OF OUR FORKLIFTS AND MACHINES FOR SALE. WE SPEAK GERMAN WE SPEAK ENGLISH HABLAMOS ESPAÑOL MÓWIMY PO POLSKU ГОВОРИМО УКРАЇНСЬКОЮ

Condition: good (used), power: 375 kW (509.86 HP), first registration: 01/2018, fuel type: diesel, axle configuration: 8x2, wheelbase: 6,700 mm, fuel: diesel, fuel tank capacity: 600 l, driver cabin: sleeper cab, emission class: euro6, total length: 9,170 mm, total width: 2,550 mm, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 8,000 kg, permissible axle load (axle 3): 11,500 kg, Year of construction: 2018, General Information Intended use: Recycling Registration number: 64-BKH-9 Technical Information Nljdpeyllpyofx Ad Sec Number of cylinders: 6 Engine displacement: 12,902 cc Axle Configuration Maximum front axle load: 9,000 kg Rear axle 1: Lift axle; max. axle load: 8,000 kg Rear axle 2: max. axle load: 11,500 kg Rear axle 3: Lift axle; max. axle load: 7,500 kg Weights Unladen weight: 13,195 kg Payload: 22,805 kg Gross vehicle weight (GVW): 36,000 kg Functionality Pump: Yes Maintenance, history, and condition APK (Technical Inspection): valid until 01.2027 Technical condition: good Optical condition: good

Condition: excellent (used), mileage: 422,117 km, power: 315 kW (428.28 HP), first registration: 01/2018, fuel type: diesel, tire size: 385/65/22.5, axle configuration: 8x4, wheelbase: 4,850 mm, fuel: diesel, fuel tank capacity: 470 l, brakes: engine braking, color: red, driver cabin: day cab, gearing type: automatic, number of gears: 12, emission class: euro6, total length: 8,800 mm, total width: 2,550 mm, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 13,000 kg, Year of construction: 2018, Equipment: ABS, air conditioning, central locking, cruise control, differential lock, electric window regulation, parking air conditioner, power mirror, soot filter, trailer coupling, = Additional Options and Accessories = - Aluminum fuel tank - Leaf suspension - Brake booster - Speed limiter - Air horn - Parabolic suspension - Particulate filter - Reversing camera - Sun visor - Toolbox - Power take-off (PTO) - Central lubrication - Towing jaw = Further Information = Technical Information Number of cylinders: 6 Engine displacement: 10,677 cc Njdpewhprrjfx Ad Selc Axle Configuration Front axle 1: Tire size: 385/65/22.5; Max. axle load: 9,000 kg; Steered Front axle 2: Tire size: 385/65/22.5; Max. axle load: 9,000 kg; Steered Rear axle 1: Tire size: 315/80/22.5; Twin tires; Differential lock; Max. axle load: 13,000 kg Rear axle 2: Tire size: 315/80/22.5; Twin tires; Differential lock; Max. axle load: 13,000 kg Weights Unladen weight: 14,110 kg Payload: 29,890 kg Gross vehicle weight: 44,000 kg Functionality Body brand: VDL S-30-6600 Condition Technical condition: Very good Visual condition: Very good Identification License plate: 61-BKH-9 MERCEDES-BENZ AROCS 8X4 VDL S-30-6600 HOOKLIFT TIPPER EURO 6 430 HP 8X4 DRIVE WHEELBASE 485 CM FULL LEAF SUSPENSION DIFF LOCK AUTOMATIC WITH ENGINE BRAKE TRAILER COUPLING VDL S-30-6600 HOOKLIFT TIPPER HYDRAULIC CONTAINER LOCKING TOOLBOX FOLLOW US ON INSTAGRAM, FACEBOOK, AND TIKTOK TO SEE VIDEOS OF OUR FORKLIFTS AND MACHINES FOR SALE. WE SPEAK GERMAN WE SPEAK ENGLISH HABLAMOS ESPAÑOL MÓWIMY PO POLSKU ГОВОРИМО УКРАЇНСЬКОЮ

Condition: excellent (used), Year of construction: 1996, The machine was only used for demonstrating to students in the brewing school. Like new. Nedpfoy It Evsx Ad Selc

Condition: used, Year of construction: 2000, Overview This cold glue labeling machine was manufactured in 2000 by Krones. The machine is designed for the application of cold glue labels on bottles. The machine is equipped with three labeling aggregates (front, back, and neck/seal label) and operates with a 20-head rotary table, making it suitable for medium-speed beverage production lines. The unit includes an integrated Krones Checkmat inspection system for quality control and comes with 11 bottle formats (0.5 – 1.0 L). Maintenance was performed as required. Technical data Capacity: up to approx. 15,000 bph Formats: 0.5 L – 1.0 L, 11 formats Application: Cold glue labeling of bottles Configuration: 20-head rotary table, 3 labeling aggregates Label positions: Front, back, neck/seal label Utilities: Standard Krones control system Incl. 3 glue pumps for cold glue system, Inspection system (Krones Checkmat), Format parts, Documentation Nledpfxoy Azv Sj Ad Sec

Condition: used, Year of construction: 2000, Overview This self-adhesive labelling machine was manufactured in 2000 by Germany KRONES. The Autocol 1200-20 TA is designed for the application of self-adhesive labels on bottles. The machine is configured with three labelling stations (front, back, and neck/seal label) and includes a Taxomat label feed system. It is suitable for standard beverage packaging applications and is equipped with an integrated Checkmat inspection system for quality control. The machine is currently still installed and will be available from February 2027. The unit is described as used and maintained based on operational requirements. Technical data Capacity: up to approx. 15,000 bph Formats: 0.5 L – 1.0 L (15 formats) Application: Self-adhesive labelling of bottles Configuration: 3 labelling stations (front / back / neck/seal) Label positions: Front, back, neck/seal Incl. Inspection system | KRONES | Checkmat Nedey Azu Uopfx Ad Sslc

Condition: used, Year of construction: 2016, machine/vehicle number: ET223, Used labeling machine AXTRA 720-H9SA4 up to 8000 bph General configuration and operational performance The used labeling machine AXTRA 720-H9SA4 up to 8000 bph delivers high-performance inline labeling for glass containers and, upon request, handles PET or other packaging materials. This fully overhauled labeling machine ensures reliable and precise operation in industrial environments that demand consistent labeling quality. Specifically, the AXTRA 720-H9-SA4 model reaches speeds of up to 8000 containers per hour, depending on sample confirmation by the customer. Operating direction and functional layout The machine operates in a clockwise direction, with containers entering from the left and exiting to the right when facing the conveyor. Therefore, this configuration supports integration into most standard bottling lines used in modern production facilities. Moreover, operators can easily align the layout with existing upstream and downstream equipment. Labeling system and reel handling The used labeling machine AXTRA 720-H9SA4 up to 8000 bph includes three non-stop labeling stations designed for 400 mm reels and one standard station for 300 mm reels. In addition, each station features sensors that accurately detect opaque labels, ensuring precise placement even with low-transparency materials. As a result, the system delivers consistent labeling quality across multiple formats. The machine can work within the following measurements, with a diameter of 45÷115mm and the heigth of 180÷330mm. Precision mechanics and integrated adjustments The machine uses electromechanical plates to guarantee high precision during operation. Furthermore, it features an electric vertical adjustment system for the upper carousel, allowing operators to perform fast format changes with minimal downtime. In fact, this automation improves productivity and reduces manual intervention. The system also includes a pre-installed optical centering system, which ensures accurate alignment on containers with printed reference marks. Consequently, the machine maintains high visual consistency during label application. Additionally, the machine supports continuous production with 9 active plates, which maintain consistent output and reduce interruptions. Nledpsw Az Diofx Ad Soc Compatible materials and reconfiguration options The machine currently labels glass containers, but our team can modify it to handle PET or other materials upon request. Similarly, we can adapt the system to different container shapes and label types. The existing setup applies front, back, and neck labels, while the fourth station supports additional applications, such as tamper-evident seals or promotional labeling. Therefore, users can reconfigure the machine to meet varied market or client-specific needs. Combination of new and used componen...

Condition: used, Year of construction: 2007, operating hours: 10,000 h, machine/vehicle number: ET212, Used Labeling Machine PE LABELERS Universal Master up to 7500 bph The Machine delivers advanced technology for labeling glass bottles, meeting production demands of up to 7500 bottles per hour. Furthermore, P.E. Labellers manufactured this machine in 2007, ensuring precise operations with its robust design and integrated features. Technical specifications and performance of the Used PE Labellers Labeling Machine The labeller includes eight rotating plates and five labeling stations. Specifically, three stations apply adhesive labels, while two use cold glue. The machine rotates clockwise, which streamlines bottle flow management. Additionally, its manual adjustment system for both the head and labels enables quick adaptations to different formats, thereby enhancing flexibility. Production capacity and configuration The labeller handles glass bottles with a maximum diameter of 120 cm and a standard 0.75-liter format. Consequently, it operates at a top speed of 7500 bottles per hour, making it ideal for medium-scale production lines. Moreover, the system applies labels to the front, back, and neck of each bottle, ensuring a high-quality, professional finish. Labeling method and management in the Used PE Labellers Labeling Machine This machine applies labels using adhesive and cold glue methods. Therefore, this dual approach ensures compatibility with a wide range of label designs and materials. Meanwhile, operators manually adjust the system to maintain precise control during each production batch. Current state and operational specifications The machine remains in storage; however, it is ready for immediate deployment. It has recorded 10,000 working hours, yet it still offers substantial operational capacity. Furthermore, its robust build, weighing 2250 kg, ensures stability and durability even under high-speed conditions. Electrical data and power requirements The labeller PE LABELERS Universal Master up to 7500 bph runs on 400 V, with an installed power of 5 kW and a frequency of 50 Hz. As a result, its electrical configuration meets industrial standards, ensuring efficient energy usage for extended operations. Additionally, its energy efficiency supports long-term cost savings. Applications and technical advantages Nlodpfovgu Udex Ad Ssc The Used Labeling Machine PE LABELERS Universal Master up to 7500 bph ensures efficient and accurate label placement. Similarly, its versatile labeling stations handle bottles of various shapes and sizes without compromising output quality. Consequently, this versatility makes it a reliable option for many bottling operations. Technicians and industry experts rely on this machine for its performance and customizable configurations. Above all, it represents an excellent choice for demanding bottling applications.

Condition: good (used), Year of construction: 2015, web offset-flexo printing machine register BST camera control system unwinder semi rotary uv flexo chamber no.1 Nledpfjwgittox Ad Ssc semi rotary uv flexo chamber no.2 semi rotary uv offset no.1 semi rotary uv offset no.2 cold embossing unit for offset semi rotary uv offset no.3 semi rotary uv offset no.4 semi rotary uv offset no.5 semi rotary uv offset no.6 semi rotary uv flexo chamber varnishing no.3 semi rotary die-cutting rewinder max speed 50 - 180 m/min color range 4 - 10 colors max print length 350 mm max paper width 320 mm max print width 300 mm max unwinding diameter 700 mm max rewinding diameter 600 mm machine including process-free CTP Agfa PT - R4300S

Year of construction: 2011, condition: ready for operation (used), A digital roll label color printing machine Xeikon including a Hunkeler unwinding module is available. Resolution X/Y: 1200/3600dpi, max. print width: 322mm, material width range: 200mm-330mm, max. repeat length: 55m, max. printing output: 380m²/h, material weight range: 40g-350g/m². Unwinding unit Hunkeler UW6-C 7199, year of manufacture: 2011, max. roll diameter: 1370mm, web width: 520mm, web speed: 220m/min, max. roll weight: 600kg. Documentation available. An on-site inspection is possible. Nljdpfx Ajy Igc Ijd Ssc

Year of construction: 2020, condition: excellent (used), Weber Legi-Air 4050E CC (Gen.3) – automatic print and apply labeling system with support frame For sale: Weber Legi-Air 4050E CC (Gen.3) – a professional industrial print and apply labeling system designed for automatic product labeling in production lines. Manufactured by Weber Marking Systems, this unit is designed for continuous operation in demanding industrial environments. The machine provides highly precise and efficient label printing and application, making it ideal for packaging and product identification processes. Technical data: Manufacturer: Weber Marking Systems GmbH Model: Legi-Air 4050E CC (Gen.3) Year of manufacture: 2020 Print resolution: 203 / 300 / 600 dpi Maximum print speed: up to 400 mm/s Capacity: up to 240 labels/min Application accuracy: ±0.8 mm Minimum label size: 10 x 5 mm Maximum label size: 160 x 350 mm Maximum applicator arm reach: 400 mm Power supply: 100–240 V AC / 50–60 Hz Nedpfx Adjy Ickbe Sslc Power consumption: 700 W Operating pressure: 6 bar Air consumption: 0.1 – 3 l / cycle Additional information: sturdy support frame included, height adjustment on the legs and on the support column, maximum labeling head height on the support frame: approx. 140 cm from the floor, can operate in four directions: left / right / up / down. TAG: industrial labeler, labeling system, label printer, print and apply system, Weber Legi-Air, Weber Marking Systems, Avery Dennison labeler, Zebra label printer, Sato labeling machine, Novexx labeling system, Videojet label applicator, Domino print and apply, automatic label applicator, carton labeling machine, production line labeler, industrial labeling machine, packaging label applicator, automatic print and apply, product labeling system, industrial label applicator

Condition: new, This machine can process cables up to 120 mm in diameter – at a rapid 40 meters per minute! A 400-volt power supply and 3 kW output require a three-phase connection. Despite its lightweight construction of only around 220 kg, the machine stands independently and is about the size of a tall household appliance. Key feature: ultra-fast processing of cable diameters between 20 mm and 120 mm. Technical data: Width: 68 cm | Depth: 59 cm | Height: 130 cm | Weight: 220 kg | Speed: 40 m/min | Voltage: 380 V | Power: 3 kW | Cross-section: 20–120 mm Nsdjy H Ikwjpfx Ad Selc