Label editing

Rotoflex Racer 1000

Condition: used, Year of construction: 2022, Maximum parent roll width: 1420 mm Minimum parent roll width: 600 mm Maximum parent roll diameter: 1500 mm Maximum parent roll weight: 2500 kg Maximum unwinding tension (Ø1500 mm): 600 N Fpsdpsyx Uy Asfx Akysn Minimum unwinding tension (Ø1000 mm): 40 N Minimum standard slitting width: 100 mm Maximum rewinding width: 1400 mm Maximum rewinding diameter: 1050 mm Maximum rewinding weight: • Ø76 mm shaft: 600 kg • Ø152 mm shaft: 1000 kg Maximum rewinding tension: 600 N Maximum production speed: 600 m/min Power supply: 3 x 400V 50Hz Installed power: 30 kW Compressed air: 6 bar, dry Materials to be slit: • Paper-based / liner-based packaging laminates. • Board from 80 to 300 g/m². Unwind section: A separate between-centers unwinder, type T9, 1500 mm diameter, including: • Hydraulic cylinder control for lifting parent rolls from the floor. • Two motors driving the unwinding roll, controlled by an ultrasonic diameter sensor and a tension-control dancer roller. • Two pneumatic expanding adapters, SVECOM, for 70/76 mm (3”) cores. • Two pneumatic expanding adapters, SVECOM, for 150/152 mm (6”) cores (mounted on the pneumatic end adapters). • Floating edge-correction roller. • Automatic web guiding system, FIFE DP20, with SE26A photoelectric sensor, ±100 mm correction via electric actuator — for controlling sheet edge or continuous printed line. • Connecting walkway allowing web threading at floor level while keeping full access to the slitting station. • All web path rollers are anodized. • Safety guarding for operator protection. Slitting section: A slitting station with individual pneumatic knives and circular counter-knives: • Shear cut performed against the counter-knives. • Counter-knife shaft driven by an independent motor; counter-knife shaft is pneumatic. • Pneumatic knife holders mounted on a beam with a dovetail guide (TIDLAND) and an air supply manifold for individual activation. • 10 slitting sets, each including: Individual TIDLAND pneumatic knife holder (25 mm width) and double-bevel circular knife Ø 90/60 mm. • Set of multi-groove counter-knife rings, 5 mm pitch, 50 mm length. Web separation section: • A separator roller driven by the slitting motor; angle and curvature fully adjustable. Lay-on roller: • Lay-on roller made of anodized ground aluminum or polyurethane (depending on materials). • Pressure is adjustable and synchronized with winding diameter. • Roller is removable. Automatic splicing / transverse cutting system: • Hydraulically operated pivoting arm including a transverse knife with linear motion and a backing plate for securing the web onto new cores. Trim extraction system: • Trim suction unit with two width-adjustable nozzles. • Turbine enclosed in a sound-insulated cabinet, conveying trim to a centralized system or container (not included). Rewinding section: • Motorized turret (two-position) supporting two rewinding shafts. • Rewinding shaft drive by an oversized asynchronous motor. • Hydraulic centering point for the active rewinding roll. • Two pneumatic expanding shafts Ø76 mm (3”), max load 600 kg each, equipped with full-width rubber strips with individual bladders. • Two pneumatic expanding shafts Ø152 mm (6”), max load 1000 kg each, also equipped with full-width rubber strips with individual bladders.

Condition: new, HIGH PERFORMANCE - BUILT FOR PROCESSING SINGLE, DOUBLE, AND HEAVY-DUTY BOARD! Main features: - 40+ pre-installed FEFCO styles, 100+ available box shapes - One-pass operation for seamless box production - Supports single, double-wall, and high-strength board - Works with sheets and concertina board - Integrated die-cutting system - Fast tool changeover - less than 20 seconds - Fully automatic servo drive setup - Large 19" touchscreen HMI with intuitive software - Slotting, creasing, cutting, gluing, and printing in a single operation - Detachable feeder (compatible with manual or vacuum feeding) - Remote diagnostics and updates via integrated VPN connection _____ Optional functions and upgrades: - Gluing system - synchronized cold glue application device - miniFLEXO - compact single-color flexo printer - Flexomat - full-format flexo printer - Vacuum feed system - compensates for sheet curvature Fjdpfx Aewrrfcekyspn - 3D scanner - automatic product scanning and data entry - Automatic box folding system - Fully automatic production line _____ Technical data: - Power supply: 3 x 380/415/480 V - Installed power: 8.5 kW - Production efficiency: Up to 500 boxes per hour - Maximum box size: 2400 mm (94") width x 9999 mm (394") length - Minimum box size: 250 mm (10") width x 750 mm (30") - Slot width: ~7-8 mm (~5/16") - Machine footprint (L x W x H): ~3600 x 1900 x 1750 mm - Machine weight: ~3800 kg (7900 lbs) For further information, contact us, we are happy to help you

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 259747, Size 516mm, roll-to-roll digital printing machine for labels, etc., Xeikon X800 front end mypress: incl. barcode and trapping software, Hunkeler unwinder, airshaft, ultrasonic webguide sensor, GEW UV dryer, 3 slitting knives, GM rewinder, Corona Plus. Fpedpfx Aey Rywwekyon

Condition: used, Letter Press Zylidner DIE Cutter Johannisberg 104 Buchdruckzylinder / Letter Press Zylidner DIE Cutter Johannisberg 104 Year 1966 - Serial-No. 2153801 Size min. 360 x 520mm - max. 720 x 1020mm Komplett mit Zubehör und Schließrahmen / Complete with tools and accessories include frame Fedsycrz Dopfx Akyopn Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Year of construction: 1993, condition: good (used), ROTOFLEX VLI 330 INSPECTION – SLITTER – REWINDER Machine information: Rotoflex products are proven in practical applications with self-adhesive labels, Fsdpfx Aksvwkhnoyopn processing, blister foils, and all kinds of paper. This professional and heavy duty die-cutter with slitter/rewinder and label checking will rewind rolls in a perfect register with a max. diameter of 700 mms and a max. width of 330 mms into smaller sized rolls. During the process the labels can be checked for quality and missing labels. Specifications:  Max. web width: 330 mms  Roll diameter: unwind: 700 mms / rewind: 400 mms  Shaft diameter: unwind: 76 mms / rewind: 76 mms  Max. speed: 230 m/min.  Slitters  Rewinders  Splice table

Condition: ready for operation (used), Year of construction: 2010, operating hours: 15,043 h, laser power: 3,600 W, travel distance X-axis: 6,500 mm, number of axes: 5, This TRUMPF TruLaser Tube 7000 KT02 was manufactured in 2010. It features a working area of 6500 mm on the X-axis and can handle circular diameters up to 200 mm. Equipped with a CO₂ laser TruFlow 2000 and a laser cutting head with a 155 mm lens, it's ideal for precise tube cutting. Contact us for more information about this machine. • Circular diameter: 200 mm • Reject station: 3 m with brush table • Reject tray • Working Range X Tube Axis: 6500 mm • Outer Circle Diameter: 254 mm (Upgraded from standard 200 mm) • Unloading Station: 3 m with brush table, front unloading • Laser Type: CO2 Laser TruFlow 3600 including LensLine (Surcharge upgrade from standard TruFlow 2000) • Control: Sinumerik 840D, Teleservice • Standard Software/Features: NitroLine, FocusLine, SprintLine, Laser power control, Programmable cutting gas pressure, Program re-entry, Automatic shutdown, Workspace lighting, Laser logbook function, Laser cooling unit • Laser: CO₂ laser TruFlow 2000 Fjdpfx Aksx D I H Deyspn • Laser cooling unit • Cutting Head: Lens cutting head with 155 mm focal length, ControlLine • Control unit: 84D • Connectivity/data transfer: RJ-45 network connection, USB connection; network connection incl. installation • Safety: CE marking, Multi-beam light barriers, Compact dust extractor 1500 Nm³/h, Protective cabin with Makrolon panels • Ambient Operating Temperature: Up to 43°C • Installation Type: Special machine installation setup Additional equipment • Accessories: • Spare parts case for cutting heads • 1 x remote control kit • Clamping jaw set Ø 16 / 200 mm • U-shaped guide rails for reject station with ID = 200 mm • Automation: • Loading Unit: LoadMaster Tube 6.5 m with bundle support, 2 grippers, 254 mm outer circle diameter capacity, low-scratch design for 6m, swiveling conveyor line, additional gripper D=254 mm • Options for LoadMaster Tube 6 m: • Circular diameter 250 mm • Shorter belt support • Swivelable conveyor section • Additional gripper Ø 200 mm • Additional gripper Ø 250 mm • Special equipment: • Flexible reject station 4.5 m (prototype) instead of reject station 3 m, without brush table • Special installation for flexible reject station • LoadMaster (series version 103) • Installation 100 mm higher (use of wire mesh container possible), decision upon acceptance • Services: • Installation, commissioning, training

Condition: used, Year of construction: 2006, working width: 520 mm, roll width: 520 mm, roll diameter: 1,000 mm, Equipment: documentation/manual, Video below We offer this used ETI Converting Equipment Cohesio ST 520 coater, die cutter, UV silicone coating, flexographic printing press 1 colour, , 11 magnetic cilinders, year of construction 2006. multifunctional equipment that allows self-adhesive materials and labels. linerless 1 flexo 2 hotmelt coating guns (roatating bar, lips + ‘Waterwall”) 3 unwinders Web width of 520 mm E + L webguides at the infeed and between hotmelt and UV printing unit 2 Corona treatments for two unwiders 2 cleaners UV Curing on 1 Flexo units (UV-Ray), which chilling rolls 2 die cutting units Chiller Working hours 9000 Year of production 2006 Fpedeyalqyspfx Akyjn more information on request If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: new, metric thread diameter (min.): 3 mm, metric thread diameter (max.): 16 mm, overall weight: 500 kg, feed length X-axis: 3,000 mm, feed length Y-axis: 1,500 mm, feed length Z-axis: 200 mm, torque: 24 Nm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 50 rpm, power: 0.005 kW (0.01 HP), The CMA 3-axis controlled tapping center is designed for the post-processing of laser-cut sheet metal parts and complete processing of small parts and tubes, for example. Fjdpfjrbz T Nsx Akyspn The machine offers the following processing options: - Thread cutting - Drilling (standard / with chip breaking / hollow profile cycle) - countersinking - Flow drilling (with optimum feed curve) - reaming - Simple graphical programming - Import of 2D DXF or DWG files - Machine table according to System 28 (similar to Demmeler and Siegmund welding tables, among others) - Radial compensation of the tool by means of patented tool holder (accessory) - Tool probe for length measurement and as a breakage detector - Intuitive safety system using light barriers Standard version: Automatic tool changer with 10 positions, mounted on the machine portal

Condition: like new (used), functionality: fully functional, Year of construction: 2018, MACCHI COEXTRUSION LINE FOR 7-LAYER EVOH BLOWN FILM Complete line for the production of 7-layer EVOH blown film 4 Macchi extruders with 65 mm screw diameter 3 Macchi extruders with 55 mm screw diameter Innoplast gravimetric dosing units 7-layer die head, 450 mm diameter with IBC, 2.4 mm GAP K-Design cooling ring Double thickness control IR+XRay Maximum width 2400 mm Calibration basket Rotating haul-off Cason corona treater Fpedjy Nk Haopfx Akysn Macchi BO-Plus double back-to-back automatic winder Web guide Year 2018

Year of construction: 2001, condition: good (used), Dear Ladies and Gentleman, we are proud to offer you following machine. You also receive the pictures of the machine so that you can see the very good condition of the machine. Fodpowmf A Defx Akyepn The offer is on condition of subject to prior sale: ROTOFLEX VLI 510 – Slitter Rewinder General information: • Brand: Rotoflex • Model: VLI 510 • Year of Manufacture: 2003 • Condition: Good working condition • Availability: Immediately Technical Specifications: • Web Width: 510mm • Functions: o Slitting o Rewinding • Rewind Diameter: Up to 700mm • Unwind Diameter: Up to 750mm • Core Sizes: 3" • Slitting System: Razor blade • Minimum Slit Width: 12mm • Web Path: Roll to roll • Counting Options: Label and length counting • Drive System: Servo driven • Web Guiding System: Included Application: Ideal for slitting and rewinding of self-adhesive labels, films, foils, and other flexible materials. • Condition: Regularly serviced and well-maintained _____ Technical and Optical Condition: • Technical: 8/10 (checked and in excellent running condition) • Optical: 8/10 (cleaned and ready for immediate end-user deployment)