Labelling machine

Transvis Datamatrix

Condition: like new (used), Thermoforming machine Stainless steel Compact and easy to use Up to 100 memorised programs Up to 10 cycles per minute 055 m³/h Power: 9.5kW Hnedextp I Ijpfx Anmer Voltage: 400V / 50Hz / 3phs

Year of construction: 2021, condition: new, Derryglan Ltd - offer a wide range of industrial washer for every application, food, meat, butcher, bakery, pharma, labs, processors and general industry. Hedpfxjgq N Eze Anmenr Washers for Utensils, Crates, Bins, Knife, Tray cleaning applications. JEROS Washers have a specially designed lid which opens fully to allow easy operation and loading without causing backstrain to operators. The special JEROS features provide easy installation of the machines. Even in the smallest production areas. Further, the machine can be used as a sink when not in use as an automatic Utensil Washer. The flush hose The flush hose makes it possible to reuse the wash water e.g. for cleaning the floors. The flush hose can also be mounted on the mixer tap if required. Mixer tap Built-in mixer tap allows washer to be used as a sink with separate drainage. Fulfils the highest hygiene standards Even the most persistent dirt is removed! The fully automatical detergent dispenser ensures the optimum dosage of soap. The powerfull pumps and rotating wash arms provide a brilliant wash result.The end rinse pump guarantees a constant temperature of 85?C during the entire rinse period and sanitisation of the utensils is achieved. An additional advantage of the high temperature rinse is the fast drying of utensils by evaporation, a rinse aid can be automatically added to assist with this process The New Generation The 9100 Series comprises a total of five new models: 9110 / 9115 with rotating wash systems and 9117 / 9120 / 9130 with wash frame system. Inside, the machines have been thoroughly redesigned, focusing on hygiene and easy cleaning. The inside surfaces and rounded to ensure quick and automatic flow of water back to the filter and pumps. Filters, wash arms and wash frames come in electropolished surface finishes leaving the stainless surface completely smooth to prevent dirt from sticking to surfaces of the machine. This makes it easier to clean and maintain the machine Efficiency and optimum hygiene safty, including HACCP, form the base of the JEROS, set of values. Energy saving up to 25 % All the machines are now available with 'i-version' as standard. This means that all machines have water saving rinse nozzles and that both the wash and rinse tanks are isolated, as also the lid is with double wall and isolated. The machines therefore require less operating power, resulting in energy and water savings of up 25 % for all the models. It is also possible now to set the machines to 'auto off', as required, so that they do not have to be left unnecessarily in standby mode if they are not used for prolonged periods of time, etc. Eco wash As standard all models includes an environmentally friendly 'ECO wash' programme for less dirty objects. Pushing 'ECO wash', the machines wash with a reduced wash temperature and use less soap. Still the rinse with 85? C hot water for guarantee of hygienic result New double Micro-Filter: Unique double filtration system, with a progressive micro-fine filter, provides an efficient filtration of the wash water - thus entails a perfect washing result with less soap consumption and minimal water consumption Larger particles are collected in a coarse filter, wereas smaller particles are captured in the self-cleaning micro-fine filter. During the washing/rinse process, the collected particles are drainet out of the micro-fine filter from the bottom, just as well from the surface of water. this ensure a constant optimum wash water quality

Condition: new, Year of construction: 2025, Manual operation with our ultrasonic cleaning technology, analog control panel, and temperature control via a digital thermostat. Functions from the PRO series can be added as optional features. We offer volumes from 60 to 7,500 liters to meet all requirements. Tank capacity: 110L External dimensions: 1970x670x970mm Hnjdpsf Hqavefx Anmor Usable dimensions of the tank: 550x350x250mm Ultrasonic frequency: 40kHz Ultrasonic power: 1000W

Condition: as good as new (ex-display), Year of construction: 2026, Ultrasonic Cleaning System ULTRA300 Usable platform dimensions: 1,050 x 550 mm Maximum usable height: 450 mm Maximum load weight: 300 kg Volume: 585 liters + 70 liters (oil separator) = 655 liters Heating: 2 x 6 kW Completely constructed from stainless steel Thermally and acoustically insulated External dimensions approx.: L 1,700 x W 1,050 x H 2,000 mm Control system manufacturer: Fatek, HMI manufacturer: Weintek Electrical power requirement: 15 kW Includes: - Automatic pneumatic goods lift - Surface spray/rinse and oil separator for bath maintenance Hnjdpfjxuzyfox Anmor - Ultrasonic submersible transducers with dual-side sonication - Output: 3,000 W effective / 6,000 W peak - Multifrequency: 20 kHz / 40 kHz - Manual blow-off pistol Demonstration unit from the Glogar Technology Center, available immediately

Condition: used, Year of construction: 2024, Overview The bottle washer was previously used in a brewery. Due to the low number of operating hours, the machine is in very good condition, like new. It was replaced, as the previous owner wanted to run bottle formats, which did not fit this machine. All basins and the machine body are made of stainless steel. The machine is already disassembled and dry stored, so that it can be easily loaded and transported. The machine comes with 12months warrantee. Tech Specs: - Capacity: 9,500 bph - Cell Pitch: 95 mm - Bottles per row: 25 - Dimensions + Weights: Housing: 7,162 x 2,740 x 2,500 mm / 18,806 kg Ready for operation with attachments: 7,162 x 3,540 x 2,730 mm / 31,563 kg - YOM 2024 - Formats: - 0,25l - 0,33l - 0,5l - 0,75l The Machine in Detail / Equipment Features: - Heated by steam - Pre Cleaning and removal of residual liquids by pulsed rinsing prior to washing - CE certified - Chemical Dosing Pumps - Machine data sheet included - High pressure pre rinsing - Rotating Spray nozzles - Single End Machine - Label discharge rear right - Finger discharge + finger feed - Bottle cells made of plastic - Concentration measurement - NaOH supply liquid - Sectional view arrangement of baths - Spindles SST - 24 volt control voltage - Control Siemens S7 - Regularly maintained Hnsdpfx Ajvrfivenmjr - Full machine body in SST - Vapor Discharge - Machine dismantled, ready to ship - Automated machine Startup

Year of construction: 2008, operating hours: 0 h, condition: new, machine/vehicle number: DW-A-414, Dental Wings Dental Wing 3D Scanner DW-5-140 Year of manufacture 2008. Serial no: DW-A-414 Accessories in a case please check the pictures, also the connection USB cables with the computer. Hsdpfehalgdsx Anmonr no USB key software is available, only the installation CD. Lamp lighting is confirmed Required PC connection • Detailed operation is uninspected because details are unknown Power 100 W, Input 100—240V, 50-60 Hz Condition: Power ON ok, but not tested. The scanner is new and has never used. price Euro 1.300 Euro + VAT, FCA: Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: used, In this offer you purchase a used dental 3D scanner ‘CADstar CS Neo’ Object of sale: 1 x CADstar CS Neo with the following equipment: Hsdpst H Eudsfx Anmonr incl. calibration body incl. holder + arti base incl. PC Condition: This offer is a used device, which may show signs of use (minor scratches or yellowing). (minor scratches or yellowing). Packaging and dispatch: You are welcome to view the device during our business hours. Please make an appointment for this! Seaworthy packaging and worldwide shipping available on request! For further information you can of course also contact us personally.

Condition: used, Year of construction: 1993, Overview The GM Gera NAGEMA Arcade DS bottle washer was previously used in a brewery. There it was operated in single-shift operation. Since the sales volume has decreased, the beer of the brewery is now bottled at another location and this bottling line has become available. Due to the low number of operating hours and regular maintenance, the machine is in a very good condition. All basins and the machine body are made of stainless steel. Spare parts, such as bottle cells, are also still available. Furthermore, the main drive shaft, as well as the motor and gearbox were overhauled by SEW in 2018 and the carrier chain was replaced in 2015. The machine is still mounted and can also be demonstrated. Tech Specs: Capacity: 23,000 bph Cell pitch: 85 Bottles per row: 16 Dimensions + weights with attachments: 8640 x 4470 x 1920 mm / 17,900 kg Details: Standard drives Heating with steam Operating side left CE certified Chemistry dosing pumps Machine data sheet Fixed pipe spraying controlled by machine cycle Single-end machine Label discharge rear right Finger discharge + finger feeding Bottle discharge left Bottle cells plastic HMI Lauer Lye concentration measurement 24 Volt control voltage Control S5 (on request conversion to S7) Regularly maintained Water part in VA Fume extraction Sampling taps KSB pumps in VA Plug-in strainers for baths Water meter Conductivity measurement from Endress Additional Equipment: Spare parts included   Hsdpfx Anol Hx Ademenr

Condition: good (used), Year of construction: 2010, Press force: max. 1200 kN; Stroke: max. 52 mm; Dimensions (W x L x H): 4610 x 3910 x 2665 mm; Total weight (net): approx. 7000 kg Hnjdoyaqgaepfx Anmjr

Condition: excellent (used), functionality: fully functional, Gas boiling kettle Brand Spako Capacity 1100l Hodpev Urudjfx Anmsnr Voltage 230V 50Hz Basket included