Used Button Manufacturer for sale (40,577)

Condition: new, Year of construction: 2026, Hot Air Lance HL-1 is a high-quality and efficient equipment. Hot Air Lance for pavement crack sealing preparation is a self-contained mobile unit for cleaning and drying of cracks, joints, potholes and chips in asphalted and concrete road surfaces, before pouring them with bitumen or bitumen polymeric materials. Powerful hot air flow removes moisture and particles of debris, grass, soil, dust, dirt, small stones, etc. leaving cracks dry, clean and ready to be filled with bitumen materials. Reasons to Buy Hot Air Lance from TICAB • Low price because of no mediators. • Always in stock. • 1-year warranty. • Full support from the manufacturer. Technical specifications: - Propane gas (consumption 5 kg / h); - Gas working pressure: 0.2-0.3 bar; Hfedpfxsvpqp Ao Agtel - Gas bottle capacity - 50 l; - Compressor unit weight - 107 kg; - Output air temperature: not less than 400 ° C; - Hot Air Lance weight - 6 kg - Hot Air Lance length: 1500 mm; - Wheeled stand weight: 4kg; - Compressor capacity - 600 l / min; - Engine power: 7 hp.

Year of construction: 2018, condition: excellent (used), Weiss Technik SaltEvent SC/UKWT 1000 Salt Spray Chamber Manufacturer: Weiss Umwelttechnik GmbH Hfedpfx Agjzqab Tstel Type: SaltEvent SC/UKWT 1000, with annular spray air Year of manufacture: 2018 Machine type: Salt spray chamber / Climate change testing system Test chamber volume: 1,028 liters For sale is a used Weiss Technik SaltEvent SC/UKWT 1000 salt spray chamber with integrated climate change technology, touch control, and annular spray air system. The system was developed for professional corrosion, salt spray, condensation water, temperature, and climate change testing. It is ideally suited for testing laboratories, the automotive industry, material testing, research, and quality assurance. Technical data: Manufacturer: Weiss Umwelttechnik GmbH Type: SaltEvent SC/UKWT 1000 Year of manufacture: 2018 Test chamber volume: 1,028 liters Internal dimensions (W × D × H): 1,560 × 645 × 720 mm External dimensions (W × D × H): 2,925 × 980 × 1,370 mm Transport dimensions (W × D × H): 2,925 × 1,880 × 1,370 mm Weight: 650 kg Power connection: 3/N/PE AC 400 V (-10 % / +10 %) 50 Hz Electrical connection: 3P+N+PE 400 Vac 32 A Rated power: 9.4 kW Rated current: 19 A Refrigerant: R134a Refrigerant quantity: 1.30 kg GWP: 1,430 CO₂ equivalent: 1.86 t Max. low pressure: 17 bar(g) Max. high pressure: 25 bar(g) Air-cooled design Ethernet interface Test ranges: Salt spray test: Ambient temperature +5 °C to +50 °C Condensation water test: Ambient temperature +5 °C to +42 °C Climate test: +23 °C to +70 °C Drying / Ventilation: Ambient temperature +5 °C to +70 °C Humidity range climate test: 20 to 98 % r. F. Humidity range drying / ventilation: < 30 % r. F. Dew point range: +12 °C to +69 °C Consumption data: Water consumption salt spray test: approx. 0.4 l/h Water consumption condensation water test: approx. 34 l Consumption of spray solution: approx. 0.9 l/h Compressed air consumption salt spray test: approx. 1.4 m³/h Compressed air consumption ventilation: approx. 7.0 m³/h Temperature stability: ±1.0 K Equipment: Touchscreen control Annular spray air system Climate change test function according to VDA 621-415 Salt spray test Condensation water test Temperature test Climate test Drying and ventilation function Air-cooled cooling system Ethernet interface Automatic test programs Transport data: Dimensions (W × D × H): approx. 2,925 × 980 × 1,370 mm Transport dimensions (W × D × H): approx. 2,925 × 1,880 × 1,370 mm Weight: approx. 650 kg Condition: Used Optical condition as shown in the pictures. Scope of delivery: Weiss Technik SaltEvent SC/UKWT 1000 Integrated touch control Accessories as shown in the pictures Availability: by arrangement. Scope of delivery as shown in the pictures. Subject to change, errors and prior sale.

Condition: new, Year of construction: 2026, functionality: fully functional, The StoNail 7000 is a fully automated portal nailing machine for the flexible production of pallets and crates, even with large workpiece dimensions. With up to three individually adjustable nailing head pairs, two work areas, and a generous Y-axis travel of 1,250 mm, it is designed for maximum efficiency and high flexibility. A 12-inch touch display, automatic height adjustment, and numerous expansion options support user-friendly operation. Offline programming allows new programs to be created and simulated outside the machine, reducing setup times and preventing downtime. The integrated automatic path optimization further increases the cycle output and ensures resource-efficient operation. Applications: Standard stringer and block pallets Special pallets & custom solutions Double-deck pallets & mixed pallets Transport frames & packaging elements Crate walls & wooden packaging Nailing bridge with rotary table: Robust frame construction with a tilt angle of 65° for ergonomic operation Machine length: approx. 7000 mm Rotary table with 2 work areas: Work area per side (L x H): 3000 x 1700 mm Cladding of the rotary table with plywood panels for custom templates Option: Clamping brackets for use with custom templates Option: Modular pallet clamping system for inserting loose boards and blocks Frequency-controlled nailing bridge: Up to three independently controlled nailing head pairs for complex nailing patterns Accommodation of up to 6 nailing heads Coverage of the entire work area with the nailing heads Collision monitoring: The movement of the feed cylinder is constantly monitored Nailing heads: Industrial nailing heads or hand-held devices Nail length max.: 130 mm Equipment of the nailing heads with Maxi-Coil magazines for up to 1000 nails Hfodporallrofx Agtjl Nailing shoes for limiting the insertion depth Option: Stapling devices, drilling heads Robot: Type: Kuka KR210 R3100-2 (Alternatively: similar manufacturer or refurbished robot possible) Gripper with clamping jaws for pallet removal and stacking Product weight max.: 80 kg Stacking height max.: 2800 mm Normal and interleaved stacking Option: Retrofitting the robot at a later date Buffer conveyor (Optional): For buffering several pallet stacks Fully enclosed by a robust plastic modular belt Programming: Simple, intuitive programming on the 12-inch touch panel directly on the machine. With the entered parameters, the pallets or crate parts are completely recorded or visualized. Programming of the removal and stacking process via robot is also done directly on the touch panel – no robot knowledge required by the customer. Siemens PLC control with control panel: Touch panel for operating the machine Pallet programming directly on the control panel Storage of the created pallet programs Pallet counter Nail counter: The machine stops as soon as the nails are used up Internet connection for remote maintenance Operating language available in German and English Option: Board width measurement for decreasing board widths Safety equipment: Safety fence around the entire system including access monitoring Emergency stop button on the outside of the machine and on the control panel Safety laser scanner to protect the rotary table Safety light curtain for pallet removal

Condition: new, Year of construction: 2026, The StoNail 7000 is a fully automated portal nailing machine for the flexible production of pallets and crates, even with large workpiece dimensions. With up to three individually adjustable nailing head pairs, two work areas, and a generous Y-axis travel of 1,250 mm, it is designed for maximum efficiency and high flexibility. A 12-inch touch display, automatic height adjustment, and numerous expansion options support comfortable operation. Offline programming allows new programs to be created and simulated outside the machine, reducing setup times and preventing downtime. The integrated automatic path optimization further increases the cycle output and ensures resource-efficient operation. Applications: Standard stringer and block pallets Special pallets & customized solutions Double-deck pallets & mixed pallets Transport frames & packaging elements Crate walls & wooden packaging Robust frame construction with a tilt angle of 65° for ergonomic operation Machine length: approx. 8500 mm Work area (L x H): 1 pallet: max. 5500 x 1700 mm or 2 pallets: max. 2000 x 1700 mm Option: Extension of the machine frame by 2000 mm or 4000 mm, or according to customer requirements Option: Widening of the machine frame by 300 mm Nailing table: Cladding of the nailing table with laminated wood panels for custom templates Hfsdpfxerallne Agtol Option: Clamping brackets when using custom templates Option: Modular pallet clamping system for inserting loose wood and blocks Frequency-controlled nailing bridge: Up to three independently controlled nailing head pairs for complex nailing patterns Accommodation of up to 6 nailing units Covering of the entire work area with the nailing units Collision monitoring: The movement of the delivery cylinder is constantly monitored Start button located directly on the nailing bridge Nailing units: Industrial nailing heads or handheld devices Nail length max.: 130 mm Equipment of the nailing units with Maxi-Coil magazines for up to 1000 nails Nailing shoes for limiting the penetration depth Option: Stapling units, drilling heads Programming: Simple, intuitive programming on the 12-inch touch panel directly on the machine. The entered parameters are used to completely record or visualize the pallets or crate components. Siemens PLC control with control panel: Touch panel for operating the machine Pallet programming directly on the control panel Storage of the created pallet programs Pallet counter Nail counter: The machine stops as soon as the nails are used up Internet connection for remote maintenance Operating language available in German and English Option: Board width measurement for varying board widths Safety equipment: Emergency stop button on the machine and on the control panel Safety light curtain around the nailing beam with Keyence laser scanner

Condition: new, Year of construction: 2026, functionality: fully functional, The StoNail 3000 is an automated portal nailing machine for the efficient production of pallets and boxes. With up to twelve nailing units, two work areas, and four clamping stations, it offers high throughput with reduced setup time. The nailing units, which are controlled in groups, are manually adjusted to the pallets to be produced and automatically moved via the central portal. A 7-inch touch display, extensive safety features, and options such as central height adjustment, robotic stacking, or remote maintenance make the StoNail 3000 a reliable solution for companies that want to efficiently produce pallets with regular nailing patterns. Applications: Standard stringer and block pallets Special pallets & customized solutions Double-deck pallets & mixed pallets Transport frames & packaging elements Box walls & wooden packaging Nailing table with nail bridge: Robust frame construction with a 70° inclination angle for ergonomic operation Machine length: approx. 8500 mm Work area (L x H): 1 pallet: max. 6000 x 1700 mm or 2 pallets: max. 2500 x 1700 mm Option: Extension or shortening of the machine frame by 2000 mm or according to customer requirements Modular pallet stop system for inserting the loose wood and blocks: Parallel adjustable double C-rails Manually adjustable stops for bottom rails, crossbars, and top boards Rivet plates can be used at all positions Stringer prefabrication Option: Equipment with laminated wood panels for custom templates Frequency-controlled nail bridge for positioning the nailing units Equipped with 8 nailing units incl. feed cylinder, nailing unit holder, release, and nailing shoes for limiting the insertion depth Manual quick adjustment of the nailing units depending on the pallet format Collision monitoring: The movement of the feed cylinder is constantly monitored Start button located directly on the nail bridge Nailing units: Uniform nailing unit holder for large and small nail guns Maximum nail length: 90 mm (longer nails available upon request) Option: Equipment of the nail guns with Maxi-Coil magazines for up to 1000 nails Programming: Hfodjralk Rjpfx Agtel Simple, intuitive programming. The machine takes over part of the programming and performs a learning cycle before the first program start to automatically detect the nail positions. Siemens PLC control with control panel: Touch panel for operating the machine Pallet programming directly on the control panel Storage of the created pallet programs Pallet counter Nail counter: The machine stops as soon as the nails are used up Internet connection for remote maintenance Operating language available in German, English, Czech, and Taiwanese Safety equipment: Emergency stop button on the machine and on the control panel Start emergency stop on the nail bridge Spring-return emergency stop on the nail bridge Option: Safety foot mats for person detection Key features and options can be found on our website.

Year of construction: 2019, condition: excellent (used), Vötsch ClimeEvent C/340/70/5/S Climate Testing Chamber (Special Edition)!! Manufacturer: Vötsch Industrietechnik GmbH Type: ClimeEvent C/340/70/5/S Year of Manufacture: 2019 Machine Type: Climate Testing Chamber / Temperature and Humidity Testing Chamber Test Chamber Volume: approx. 340 liters Description For sale is a used Vötsch ClimeEvent C/340/70/5/S temperature and climate testing chamber from 2019. This unit is a rare special edition with three side-pull-out telescopic test drawers. The test specimens can be conveniently prepared and connected outside the test chamber and then inserted into the test chamber. This makes the system particularly suitable for series testing, development tasks, long-term tests, and applications with frequent sample changes. Each test drawer features a stainless steel grid basket and a separately lockable front with its own test specimen port. The three separate test levels allow for a clear arrangement of several test specimens or assemblies within a single test chamber. The system is equipped, among other things, with WEBSeason Touch control, temperature and humidity control, Donaldson compressed air treatment, and extensive documentation. The system is suitable for: Temperature tests Climate tests Environmental simulation Material testing Electronics testing Component testing Battery testing Sensor testing Quality assurance Research and development Aging and stress tests Technical Data Manufacturer: Vötsch Industrietechnik GmbH Type: ClimeEvent C/340/70/5/S Year of Manufacture: 2019 Test Chamber Volume: approx. 340 liters Temperature Range: approx. -70 °C to +180 °C Temperature Change Rate: approx. 5 K/min Max. Heat Compensation: approx. 3,000 W Temperature Deviation (time-dependent): ±0.1 to ±0.5 K Temperature Homogeneity (spatial): ±0.5 to ±1 K Temperature Gradient: ≤2 K Power Connection: 3/N/PE AC 400 V ±10% / 50 Hz Rated Power: 9 kW Rated Current: 20 A Refrigerant 1: R449A – 2.50 kg Refrigerant 2: R23 – 0.75 kg Hedpfjzp Nv Dox Agtjfl Max. Low Pressure: 21 bar(g) Max. High Pressure: 25 bar(g) Stand Pressure R23: 13 bar(g) Dimensions External Dimensions (H x W x D): approx. 1,800 x 895 x 1,810 mm Test Chamber Dimensions (H x W x D): approx. 750 x 580 x 765 mm Weight: approx. 650 kg Equipment WEBSeason Touch Panel Temperature and Humidity Control Stainless Steel Interior Large Observation Window 3 side-pull-out telescopic test drawers 3 stainless steel grid baskets Separately lockable drawers Heated drawer ports Test specimen ports Donaldson Ultrafilter for compressed air treatment Shipping Information External Dimensions (H x W x D): approx. 1,800 x 895 x 1,810 mm Weight: approx. 650 kg Condition Used The unit has been workshop-tested and subjected to a documented test run. The optical condition corresponds to the images. Scope of Supply Vötsch ClimeEvent C/340/70/5/S Climate Testing Chamber 3 telescopic test drawers 3 stainless steel grid baskets Donaldson Ultrafilter Accessories according to images Shipping or forwarding possible. Subject to change, errors and prior sale. We are happy to answer any further questions by telephone.

Condition: used, up to 120 grams. Hjdpfjt Ibfbjx Agtjfl 1200 pcs/hour

Condition: excellent (used), functionality: fully functional, Complete machinery set for sale, consisting of: Holzher machinery set, like new (in operation since 06/2024), consisting of: Tectra 6120 Dynamic beam saw, automatic panel storage system Storemaster 5110 (approx. 12 x 18 m) Evolution 7450 vertical machining center Nextec 7705 nesting machining center Weinig Dimter Opticut S60 optimizing miter saw (year of manufacture 2009) including waste conveyor (new, in operation since 06/2024) Nestro dust extraction system (in operation since 06/2024) consisting of: filter tower 11 kW + 7.5 kW (15,000 m³/h) briquetting press shredder piping for all machines, various pipe diameters Mobile dust extraction unit Holzkraft RLA160 2x mobile dust extraction units ASA2553 or similar 2x Renner compressors, each 7.5 kW (1 of which is new and in operation since 06/2024) 1x Ayen multi-spindle drilling machine, custom-built, with a 2.5 m stop rail Hjdpfx Aozh Hw Asgtsfl 1x Cesab B625 electric forklift, 2.5 tons (year of manufacture 2014) 2x electric high-lift pallet trucks, Toyota/BT (year of manufacture) 3x electric high-lift pallet trucks, Cesab, including initial lift (year of manufacture 2025) Various workbenches, templates, pallet racking, material trolleys, etc. BeA various nailers and staplers Various electric power tools, vacuum cleaners from Festool, Bosch Professional, etc. Benchtop drill press Stürmer Festool table saw Bosch large panel miter saw on stand EUR 530,000,- net (Total price EXW (ex works) for self-dismantling/collection) If you are seriously interested, pictures and details of the individual items can be provided.

Condition: good (used), Code: 0253 Brand: LARI E LARI - ITALY Model: FR 20 - TA - CE Standard Working center for milling and boring on wood or plastic and composite materials, wooden doors, window frames - CE Standard Technical data: X-axis working stroke 3250 mm Y-axis working stroke with 90° cutter 130 mm Z-axis working stroke with 0° cutter 290 mm Z-axis working stroke with 90° cutter 175 mm X-axis working speed mt/min 40 Y-axis working speed mt/min 30 Z-axis working speed mt/min 30 Hinge boring inserting unit: Male/Female Speed control inverter Probe Tool holder collet ER 25 Power of anuba head drilling electric spindle 2,2 Kw Hodox A Hdxjpfx Agtjfl Anuba head inclination -10 +90° Electric spindle for milling: 2,7 Hp at 18,000 rpm Collet chuck ER 32 Variable speed via inverter Inclination from 0 to 90° for both vertical and horizontal machining Machine computer: numerical control - Windows XP operating system - color video - alphanumeric keyboard - USB port - interpolation Work table with 3 sliding clamps for locking workpieces Installed power 12 Kw Suction mouth diameter 120 mm Compressed air 7-8 bar Overall dimensions for transport mm 4100 x 1500 x 2100 h Machine weight 1400 kg Electrical panel 250 kg

Condition: new, functionality: fully functional, Year of construction: 2015, machine/vehicle number: Masa HDP-800, Silicate brick production equipment Masa GmbH HDP-800 Hjdpfjx Aza Uex Agtsfl

Year of construction: 2018, condition: excellent (used), CTS T-70/600 Temperature Testing Chamber Manufacturer: CTS GmbH Model: T-70/600 Machine type: Temperature testing chamber Test chamber volume: approx. 600 liters Hjdpfx Agjzmrmyotofl Temperature range: -70 °C to +210 °C For sale is a used CTS T-70/600 temperature testing chamber from the year 2018. This air-cooled unit is suitable for professional temperature testing, environmental simulations, material testing, quality assurance, as well as development and stress tests. The stainless steel test chamber has a volume of approx. 600 liters. Technical data: Manufacturer: CTS GmbH, Hechingen Model: T-70/600 Year of manufacture: 10/2018 Test chamber volume: approx. 600 liters Design: Standalone unit, air-cooled Temperature range: -70 °C to +210 °C Temperature stability over time: approx. ±0.3 K Max. heat compensation at +20 °C: approx. 4,000 W Heating rate: approx. 3.5 K/min Cooling rate: approx. 3.0 K/min CE marking available Electrical data: Rated voltage: 400 V / 3/N / 50 Hz Rated power: 9.1 kW Rated current: 14.6 A Protection class: IP22 Refrigeration system: Design: air-cooled Pre-cooling stage: R452A, 2.4 kg CO₂ equivalent: 5.14 t GWP: 2,140 Cooling stage: R23, 0.8 kg CO₂ equivalent: 11.25 t GWP: 14,800 Operating overpressure PS: 25 bar Test pressure PT: 27.5 bar Dimensions and weight: Test chamber internal (H × W × D): approx. 850 × 850 × 830 mm External dimensions (H × W × D): approx. 1,900 × 1,120 × 1,875 mm Weight: approx. 600 kg Sound pressure level: below 58 dB(A) Equipment: Capacitive multi-touch display Integrated program generator Fixed value and program operation Stainless steel test chamber, material 1.4301 Viewing window with interior lighting Temperature measurement via inlet and outlet air with Pt100 Software temperature limiter Ethernet, RS232 and USB interface Digital outputs for test item control Lateral cable entry Lockable door closure Movable design with rollers Test chamber and condensate drain Note: This unit is a temperature testing chamber. Humidity control is not available. Condition: Used Optical condition according to pictures Normal signs of wear and tear due to age and use Scope of delivery: CTS T-70/600 temperature testing chamber Accessories as shown in the pictures The table shown in the photos as well as other items not explicitly mentioned are not included in the sale. Shipping via freight forwarder is possible. Loading with a forklift is possible. Subject to changes, errors and prior sale.

Year of construction: 2018, condition: excellent (used), CTS T-70/600 Temperature Test Chamber Manufacturer: CTS GmbH Model: T-70/600 Year of manufacture: 10/2018 Machine type: Temperature test chamber Test chamber volume: approx. 600 liters Temperature range: -70 °C to +210 °C For sale is a used CTS T-70/600 temperature test chamber from 2018. This air-cooled, stand-alone unit is suitable for professional temperature testing, environmental simulations, material testing, quality assurance, and development and stress tests. The stainless steel test chamber has a volume of approximately 600 liters. Technical data: Manufacturer: CTS GmbH, Hechingen Model: T-70/600 Year of manufacture: 10/2018 Test chamber volume: approx. 600 liters Design: Stand-alone unit, air-cooled Temperature range: -70 °C to +210 °C Temporal temperature stability: approx. ±0.3 K Max. heat compensation at +20 °C: approx. 4,000 W Heating rate: approx. 4.03 K/min Cooling rate: approx. 3.17 K/min CE marking present Electrical data: Rated voltage: 400 V / 3/N / 50 Hz Rated power: 9.1 kW Rated current: 14.6 A Protection class: IP22 Refrigeration system: Design: air-cooled Pre-cooling stage: R452A, 2.4 kg CO₂ equivalent: 5.14 t GWP: 2,140 Cooling stage: R23, 0.8 kg CO₂ equivalent: 11.25 t GWP: 14,800 Operating pressure PS: 25 bar Test pressure PT: 27.5 bar Dimensions and weight: Internal test chamber (H × W × D): approx. 850 × 850 × 830 mm External dimensions (H × W × D): approx. 1,900 × 1,120 × 1,875 mm Weight: approx. 600 kg Sound pressure level: below 58 dB(A) Equipment: Capacitive multi-touch display Integrated program generator Fixed value and program operation Stainless steel test chamber, material 1.4301 Viewing window with interior lighting Temperature measurement via inlet and outlet air using Pt100 Software temperature limiter Ethernet, RS232 and USB interface Digital outputs for test item control Lateral cable entry Lockable door latch Mobile design with rollers Test chamber and condensate drain Workshop inspection: Functional test performed Electrical connection and phase sequence tested Heating and cooling function tested Hfjdpfx Aozmqx Isgtsl Speed test performed LAN communication and buffer battery tested Inspection seal applied Note: This unit is a temperature test chamber. Humidity control is not available. Condition: Used Optical condition as shown in the pictures Normal signs of wear and tear due to age and use Scope of delivery: CTS T-70/600 temperature test chamber Operating manual and technical documentation Test and workshop documents Accessories as shown in the pictures The table shown in the photos and any other items not explicitly mentioned are not part of the sale. Shipping via freight forwarder possible. Loading possible with a forklift. Subject to changes, errors and prior sale.

Condition: good (used), BIHLER GRM100 multislide punching and forming machine, Made in Germany. Machine re-engineered in year 2010 originally by Bihler, updated with servo motor, pump, rewired, new control, etc. Equipped with 4x forming slides and 18 ton press station. Gripper feed on right-hand side with straightener. Max width of strip 100 mm. Hedpfx Agepm H Haetofl Max wire diameter 10 mm. Standard feed length 250 mm max. Max operating speed 135 strokes per minute approx. Servo motor. Touch screen control. Air clutch. Weight cca. 6000 kg. Power supply 400/480V, 50 Hz. On stock more Bruderer, Schaal, and Mabu high speed presses. Also Ideal flash butt welding machines.

Condition: excellent (used), Year of construction: 2024, Stäubli TS2-40 SCARA industrial robot with CS9 controller and SP2 teach pendant Manufacturer: Stäubli Model: TS2-40 Robot year of manufacture: 02/2024 Controller year of manufacture: 02/2024 Machine type: 4-axis SCARA industrial robot Controller: Stäubli CS9-TS2-40 For sale is a used Stäubli TS2-40 SCARA industrial robot including CS9-TS2-40 robot controller, SP2 teach pendant and original robot connection cable. The compact robot system was designed for fast and precise pick-and-place, assembly, handling, and automation tasks. The system is suitable for, among other things, electronics manufacturing, machine assembly, packaging technology, laboratory automation, quality assurance, and general industrial applications. Technical data: Model: TS2-40 Robot type: SCARA robot Number of axes: 4 Robot year of manufacture: 02/2024 Reach: 460 mm Rated payload: 2.4 kg Maximum payload: 8.4 kg Z-axis stroke: 200 mm Repeatability XY: ±0.01 mm Repeatability Z: ±0.004 mm Repeatability Rz: ±0.002° Mounting type: Floor mounting Performance data: Maximum speed axis 1: 550°/s Maximum speed axis 2: 720°/s Maximum speed axis 3: 2,500 mm/s Maximum speed axis 4: 2,500°/s Cycles per minute: up to 240 Energy consumption according to VDMA 24608: approx. 0.397 kW Controller: Manufacturer: Stäubli Type: CS9-TS2-40 Controller: CS9 Controller year of manufacture: 02/2024 Controller version: Rack controller Teach pendant: SP2 Power supply: 1 × 230 V AC / 50–60 Hz Connection power: 1,700 VA Communication: Ethernet / PROFINET Device Software: VAL 3 activated Handheld device: Manufacturer: Stäubli Model: SP2 Version: Teach pendant / handheld device Touchscreen color display Integrated emergency stop switch Operation and programming of the robot system Power supply: 24 V DC / 0.5 A Date of manufacture: 11/2023 Connections: Controller power supply: 1 × 230 V AC / 50–60 Hz Power consumption: 1,700 VA PROFINET Device Ethernet Digital inputs and outputs Pneumatic connections on the robot Equipment: Stäubli TS2-40 SCARA robot Stäubli CS9-TS2-40 robot controller Stäubli SP2 teach pendant Original robot connection cable Pneumatic and electrical connections in the robot arm Ethernet interface PROFINET interface VAL-3 programming system Tool mounting according to images Accessories according to images Hjdpfxjzlry Re Agtsfl Dimensions: Robot dimensions (W × D × H): approx. 400 × 300 × 650 mm Controller CS9 dimensions (W × D × H): approx. 600 × 500 × 270 mm Teach pendant SP2 dimensions (W × D × H): approx. 290 × 180 × 90 mm Maximum reach: 460 mm Z-axis stroke: 200 mm Shipping data: Robot weight: approx. 38 kg Controller weight: approx. 30 kg Total weight without additional accessories: approx. 68 kg Shipping dimensions complete (W × D × H): approx. 1,200 × 800 × 700 mm Shipping on a pallet recommended Condition: Used Year of manufacture 2024 Optical condition according to images. System start and information menus were tested. Robot system including controller and SP2 teach pendant. Scope of delivery: Stäubli TS2-40 SCARA industrial robot Stäubli CS9-TS2-40 controller Stäubli SP2 teach pendant Original robot connection cable Tool mounting Accessories according to images Availability: upon agreement. Scope of delivery as shown in the images. The table shown in the photos is not part of the sale. Subject to changes, errors and prior sale.

Condition: excellent (used), Year of construction: 2023, Stäubli TS2-40 SCARA Industrial Robot Manufacturer: Stäubli Faverges SCA Type: TS2-40 Robot Year of Manufacture: 03/2023 Machine Type: 4-Axis SCARA Industrial Robot Controller: Stäubli CS9-TS2-40 For sale is a used Stäubli TS2-40 SCARA industrial robot with CS9 controller. This compact robot system has been designed for fast and precise pick-and-place, assembly, handling, and automation tasks. The system is suitable, among other applications, for electronics manufacturing, machine assembly, packaging technology, laboratory automation, quality assurance, and general industrial applications. Technical Data: Manufacturer: Stäubli Faverges SCA Model: TS2-40 Robot Type: SCARA Robot Number of Axes: 4 Robot Year of Manufacture: 03/2023 Reach: 460 mm Rated Payload: 2.4 kg Maximum Payload: 8.4 kg Z-Stroke: 200 mm XY Repeatability: ±0.01 mm Z Repeatability: ±0.004 mm Rz Repeatability: ±0.002° Mounting Type: Floor Mounting Performance Data: Maximum Speed Axis 1: 550°/s Maximum Speed Axis 2: 720°/s Maximum Speed Axis 3: 2,500 mm/s Maximum Speed Axis 4: 2,500°/s Cycles per Minute: up to 240 Power Consumption according to VDMA 24608: approx. 0.397 kW Controller: Manufacturer: Stäubli Type: CS9-TS2-40 Controller: CS9 Controller Year of Manufacture: 03/2023 Controller Version: Rackable Supply: 1 × 230 V AC / 50–60 Hz Connection Power: 1,700 VA Communication: Ethernet / PROFINET Device Software: VAL 3 activated Equipment: Stäubli TS2-40 SCARA Robot Stäubli CS9-TS2-40 Robot Controller Original Robot Connection Cable (Robot ↔ Controller) Pneumatic and Electrical Connections in Robot Arm Ethernet Interface PROFINET Interface VAL-3 Programming System End-of-Arm Tooling according to Images Accessories according to Images Dimensions: Maximum Reach: 460 mm Z-Stroke: 200 mm Dimensions CS9 Controller (H × W × D): approx. 270 × 445 × 365 mm Shipping Data: Robot Weight: approx. 38 kg Controller Weight: approx. 30 kg Total Weight: approx. 68 kg Shipping Dimensions on Pallet (W × D × H): approx. 1,200 × 800 × 700 mm Condition: Used Year of Manufacture: 2023 Optical Condition according to Images. System start-up and information menus have been tested. A teach pendant is not included in the scope of supply. Scope of Supply: Stäubli TS2-40 SCARA Industrial Robot Stäubli CS9-TS2-40 Controller Original Robot Connection Cable (Robot ↔ Controller) End-of-Arm Tooling Accessories according to Images Hsdpfx Aozlq E Sjgtjfl Scope of supply as shown in the images. The table shown in the photos, as well as any other items not expressly mentioned, are not included in the sale. Subject to change, errors and prior sale.

Condition: new, The CT 25 (Ø 0.2 to 2.5 mm) replaces and/or complements the 25TS, which operates with a cam system. This machine has between 11 and 16 axes, details of which are given below: - 8 independent slides - wire feed - nozzle rotation - servo spinner OR lateral movement of winding finger Hfodpfjvbd Ezjx Agtjl Optional (up to 5 additional axes) - servo cutter - servo spinners (additional) - lateral movement of winding finger - transfer for raising the second (German-type) extension spring eye. Maximum feed speed: 121 m/min. Slide travel: 50 mm Machine dimensions: 1.30 x 1.46 x 1.68 m. Machine weight: 900 kg. If you have any further questions, please do not hesitate to contact us.

Condition: excellent (used), Year of construction: 2024, Stäubli TS2-40 SCARA Industrial Robot Manufacturer: Stäubli Faverges SCA Type: TS2-40 Robot Year of Manufacture: 05/2024 Machine Type: 4-Axis SCARA Industrial Robot Controller: Stäubli CS9 For sale is a used Stäubli TS2-40 SCARA industrial robot with CS9 controller and SP2 handheld device. This compact robot system is designed for fast and precise pick-and-place, assembly, handling, and automation tasks. The system is suitable for various applications, including electronics manufacturing, machine loading, packaging technology, laboratory automation, quality assurance, and general industrial applications. Technical data: Manufacturer: Stäubli Faverges SCA Model: TS2-40 Robot type: SCARA robot Number of axes: 4 Robot year of manufacture: 05/2024 Reach: 460 mm Rated payload: 2.4 kg Maximum payload: 8.4 kg Z-axis stroke: 200 mm Repeatability XY: ±0.01 mm Repeatability Z: ±0.004 mm Repeatability Rz: ±0.002° Mounting type: Floor mounting Performance data: Maximum speed axis 1: 550°/s Maximum speed axis 2: 720°/s Maximum speed axis 3: 2,500 mm/s Maximum speed axis 4: 2,500°/s Cycles per minute: up to 240 Power consumption according to VDMA 24608: approx. 0.397 kW Controller: Manufacturer: Stäubli Type: CS9-TS2-40 Controller: CS9 Controller year of manufacture: 04/2024 Controller version: Rackable Power supply: 1 × 230 V AC / 50–60 Hz Connected power: 1,700 VA Communication: Ethernet / PROFINET Device Software: VAL 3 activated Handheld device: Manufacturer: Stäubli Model: SP2 Touchscreen color display Integrated emergency stop switch Operation and programming of the robot system Power supply: 24 V DC / 0.5 A Equipment: Stäubli TS2-40 SCARA robot Stäubli CS9 robot controller Stäubli SP2 handheld device Robot and connection cables Pneumatic and electrical connections in the robot arm Hsdpfezlhvujx Agtefl Ethernet interface PROFINET interface VAL-3 programming system Gripper mounting according to images RoboticsControls software / DVD Technical documentation Dimensions: Maximum reach: 460 mm Z-axis stroke: 200 mm Dimensions CS9 controller (H × W × D): approx. 270 × 445 × 365 mm Condition: Used Year of manufacture 2024. Optical condition according to images. Scope of delivery: Stäubli TS2-40 SCARA industrial robot Stäubli CS9 controller Stäubli SP2 handheld device Robot cable and connection cables RoboticsControls software / DVD Technical documentation Accessories according to images Scope of delivery as shown in the pictures. The table shown in the photos, as well as any other items not explicitly mentioned, are not part of the sale. Subject to changes, errors and prior sale.

Condition: excellent (used), External Quick-Receiver Hfsdpfowf Hhfsx Agtel Stock Number (28620) Manufacturer: Kroeplin Odistest OD60100BJ AF01E032 Measuring range 0-100 mm Probe length 530 mm Packaged in a wooden case

Condition: new, Two buttons and emergency stop switch Length 129 mm Width 70 mm Height 65 mm Hsdpfotr Ei Rox Agtsfl Total height 92 mm unused, from magazine release several available

Condition: excellent (used), digital internal sensor Brand Intertronic Hfedpfevwa D Esx Agtsl Type EID 1010 Measuring range 10-35 mm (108147)

Condition: excellent (used), functionality: fully functional, Large fully hydraulic EISELE: Weight approx. 0.75 t, saw blade 440 mm Speeds: 12.5 / 25 rpm Motor power: 2.6 / 3.2 kW Hydraulic saw feed Hfedpfxjzpfgrs Agtel Hydraulic vice Cutting ranges: 200 x 100 mm (square tube) Mitre cut one-sided 45°.

Condition: used, “functionally tested; item originates from the dismantling of equipment from an automotive supplier” Quantity: > 100 units Siemens Sinumerik 6FC5303-1AF30-0AA0 MPP 1500D Push Button Panel Control Panel MPP 1500D Hedpfx Agezi Dr Hetsfl Connection: Industrial Ethernet AND PROFINET with connection for HT8

Condition: excellent (used), EOS P 396 Laser Sintering System Manufacturer: EOS GmbH Type: P 396 Machine Type: Industrial SLS laser sintering system for plastic components Process: Selective Laser Sintering (SLS) For sale is a professional, industrial laser sintering system from EOS GmbH. The system was developed for the additive manufacturing of plastic components using the Selective Laser Sintering process and is suitable for prototyping, small-series production, research and development, as well as industrial production applications. Technical Data Technology: Selective Laser Sintering (SLS) Usable build volume: 340 x 340 x 600 mm Build rate: up to 48 mm/h (material-dependent) Layer thicknesses: 0.06 mm 0.10 mm 0.12 mm 0.15 mm 0.18 mm Laser system: CO₂ laser Laser power: 70 W F-Theta precision optics Scanning speed up to 6 m/s Laser class 1 Voltage: 400 V 3~ / N / PE Frequency: 50 / 60 Hz Rated power: 10 kW Current draw: 16 A Fuse rating: 32 A Supply: Integrated nitrogen generator External nitrogen connection available Compressed air supply required: at least 10 m³/h at 5,000 hPa Software EOS PSW EOS RP Tools EOSTATE Interfaces STL Ethernet Certifications CE NFPA EN 60825-1:2007 Maintenance Condition Current service and maintenance records are available. According to the available service reports, the following work has been carried out, among others: Heating elements replaced Roller belt replaced X-axis and carriage cleaned Laser window and mirrors cleaned Seals replaced Safety circuits checked Docking Station / Powder Supply Docking station with pneumatic conveying system for automated powder supply to the laser sintering system. Manufacturer: HYDAC Cooling GmbH Type: FWKS-G2-001500-W-W-R25-2-IW-UL Electrical data: 230 V ±10 % 1 PH / 50-60 Hz Max. current draw: 8.0 A ICC / SCCR: 10 kA CE / RoHS Additional Equipment Control panel Docking station Pneumatic conveying system 2 x EOS Multibox Capacity per Multibox: approx. 230 liters For storing, collecting, and transporting fresh and used powder. Dimensions and Weight System including control cabinet: approx. 1,840 x 1,175 x 2,100 mm Control panel: approx. 950 x 700 x 1,550 mm Total weight of laser sintering system: approx. 1,400 kg Recommended installation space: at least 4.3 x 3.9 x 3.0 m Areas of Application Additive Manufacturing Rapid Prototyping Small-Series Production Automotive Industry Mechanical Engineering Aerospace Medical Technology Hfedpfxjzarg Uo Agtsl Research and Development Scope of Delivery EOS P 396 Laser Sintering System Control panel Docking station 2 x EOS Multibox Available documentation Service reports Accessories and components as shown in the pictures Condition Used Machine from industrial use Optical condition as shown in the pictures Scope of delivery as shown Inspection and testing on site possible and expressly desired after prior appointment. Shipping or freight forwarding possible. Availability: upon agreement. Scope of delivery as shown. Changes and errors in the technical data as well as prior sale are reserved.

Condition: excellent (used), Mitutoyo Type: QS250Z Mitutoyo QS250Z CNC Vision Measuring Machine – Year of manufacture: 2017 – incl. software & accessories For sale is a high-quality Mitutoyo QS250Z CNC vision measuring machine from 2017, in excellently maintained condition. This is a precise optical coordinate measuring machine for non-contact measurement of workpieces. Ideal for quality assurance, incoming goods inspection, production, precision engineering, electronics, plastics technology, and much more. What can the device do? The QS250Z is a CNC-controlled optical measuring machine for: - 2D coordinate measurement - Contour and profile measurement - Distance, radius, angle, and diameter determination - Measurement of bores, grooves, edges, and complex geometries - Serial measurements with automated measurement programs - Documentation and report generation via Mitutoyo software Measurement is non-contact via a high-resolution camera system with image processing. Ideal for sensitive or small parts where tactile measurement is unsuitable. Thanks to CNC control, automated measurement procedures are possible – perfect for recurring testing processes. Technical data: Model: Mitutoyo QS250Z Machine type: CNC Vision Measuring Machine Year of manufacture: 2017 Code No.: 359-508-10Y Manufacturer: Mitutoyo Corporation, Japan Electrical data: 200–240 V AC 50/60 Hz Power consumption: approx. 500 W Fuse: 250V T 2.5A Dimensions (approx.): Width: approx. 700–800 mm Depth: approx. 900 mm Height: approx. 1,100 mm Weight (approx.): 150–200 kg Important notice: "The table shown in the photos is not included in the sale." Condition: used Hedpfx Asynkbaogtofl Scope of delivery: (see picture) - Mitutoyo QS250Z main unit - Joystick box - Software package: - QS-ConfigDisk - QSPAK - FORMTRACERPAK-AP - MiCAT Vision / Form - Manuals & documentation - Various electronic boards (see pictures) - Further accessories as shown (Technical data and information subject to change and error!) For further questions, please feel free to contact us by phone.

Condition: excellent (used), Year of construction: 2020, ACSYS Model: BARRACUDA® Custom Dual FL70S ACSYS Laser Processing System BARRACUDA® Custom Dual FL70S Fiber Laser – Industrial Laser System – Year of Manufacture 2020 For sale is a high-quality ACSYS laser processing system, model BARRACUDA Custom Dual FL70S, manufactured in Germany. The machine is in a very well-maintained condition and is a professional industrial system for precise laser marking, engraving, and material processing. The system is equipped with two air-cooled fiber lasers (2×70 W), making it ideal for series production, industrial marking, engraving, labeling, and processing of complex components. Thanks to its stable granite axis construction and fully enclosed safety cabin, the machine operates with the highest precision, reliability, and safety (Laser Class 1). Perfect for use in industry, metalworking, automotive suppliers, toolmaking, electronics, nameplates, DataMatrix codes, barcodes, serial numbers, and much more. Capabilities: - High-precision laser engraving and laser marking on metal and various materials - Series marking, nameplates, QR / DataMatrix codes, logos, numbering - Processing large layouts without misalignment (Large Field Removal Option) - 3D component processing possible - Camera positioning system for precise workpiece alignment - Automated processes / industrial integration possible (PLC, network, USB) - Low-maintenance, air-cooled fiber lasers with long service life - Fully enclosed, safe industrial system (Laser Class 1) Features / Options: - Camera system LAS – Live Adjust System HD - Large Field Removal (LFR) – processing large fields without misalignment - Industrial PC control with ACSYS Software Suite - Network / USB / PLC connectivity - Automatic door & safety monitoring - Lighting & signal beacon Hfsdpfx Aoyi Twgogtol - Air-conditioned control cabinet - Fume extraction and filtration system for laser fumes - Extraction and filter unit (ULT LAS 1500) - Max. airflow: 3,240 m³/h - Nominal airflow: 1,200 m³/h - Max. negative pressure: 3,450 Pa - Power consumption: approx. 2.2 kW - Weight: approx. 300 kg Technical Data: Machine - Manufacturer: ACSYS Lasertechnik GmbH (Made in Germany) - Model: BARRACUDA® Custom Dual FL70S - Year of manufacture: 04/2020 - Laser: 2 × Fiber laser, 70 watts each (air-cooled) - Wavelength: 1055 – 1070 nm - Processing area: approx. 570 × 570 mm - Travel path: - X: approx. 875 mm - Y: approx. 600 mm - Z: approx. 190 mm Electrical Data: - Connection: 3AC / N / PE 400 V - Frequency: 50 Hz - Power consumption: approx. 5.5 kW Dimensions & Weight: - Cabin width: approx. 2050 mm - Cabin height: approx. 2300 mm (with signal beacon approx. 2600 mm) - Cabin depth: approx. 2850 mm - Total machine weight: approx. 3,800 kg Condition: used Scope of delivery: (see picture) (Subject to changes and errors in the technical data and specifications!) We are happy to answer further questions by phone.