Used Button Head for sale (11,465)

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: SÇ 100 ÇİFT KÖŞE KAYNAK MAKİNESİ, • Enables 0.2 mm hairline welding for both white and colored profiles. • Compliant with CE standards. • Simplified machine control panel ensures time savings. • Delivers maximum welding strength. • Offers both standard and 0.2 mm welding capability for laminated profiles. • Movable right head is lockable via button. • Maximum welded profile length: 3180 mm. • Minimum welded profile length: 340 mm. • Maximum welded profile height: 190 mm. • Minimum welded profile height: 40 mm. • Easy mould change system provides time efficiency. Hfjdpfoq U Sx Ejx Agtel • PLC control system is included. • Adjustable heating temperature, welding time, and pressure for different profile types. • Heating unit features thermostatic control regulation. • Heating plate temperature can be easily adjusted via digital display. • Power supply protects the system against sudden voltage fluctuations. • One set of welding mould is provided free of charge with the machine. • LED warning system in operation and standby modes (2026 model).

Year of construction: 2024, condition: as good as new (ex-display), machine/vehicle number: S23EVA01, Stretch wrapper EVA TECHNICAL DETAILS Turntable / base frame / Ø 1,500 mm Max. pallet dimensions: 800 x 1,200 mm Max. load capacity: 1,500 kg Wrapping height (pallet included) 2,200 mm Height of turntable 75 mm Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other Hfedpou Tk Etefx Agtsl F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Pallet wrapping height setting F62 - Ergonomic height for film change ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 1 storable wrapping program F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - manual winding F12 - winding to a stored height (while switching off the light button) F29 - Soft start cycle for edge protection application Soft start to reduce film tears on sharp pallet edges FILM SLIDE TYPE “FM” WITH MECHANICAL BRAKE via manually adjustable brake roller on the foil carriage Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Standard connection values: 230 V - 1L+N+PE - 50 HZ Total power: 1.2KW / 6A Options: Turntable 1650mm ramp mounting frame Light scanner for black products Other systems available from the Ludwigsburg warehouse.

Year of construction: 2025, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S23SynthesiLow04, Exhibition machine, like new. SYNTHESI with a flat turntable Turntable height 25mm Short ramp 500mm long TECHNICAL DETAILS: Turntable LOW PROFILE · Height 25mm · Max. pallet dimensions: 1000 x 1200 mm · Max. load capacity: 1200 kg · a ramp included Wrapping height (pallet included) 2,200 mm Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function & reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL Hfsdpfoykucmjx Agtel All function parameters can be set via the display F00 - Screen lock program change F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Foil consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 storable winding programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) Reinforcement cycle via push button FILM SLIDE TYPE "OPRS - ONE PRE STRETCH" Film pre-stretch ratio set to 200% Foil application tension electronically controlled via control unit Foil specification Max. outer diameter Ø250mm - height = 500mm - core Ø76mm Standard connection values: 230 V - 1PH+N+PE - 50/60 HZ Total power: 1.2KW / 8A Optional: pinion for OPRS pre-stretching ratio of 150% / 250% / 300% possible Other systems available from the Ludwigsburg warehouse.

Condition: good (used), Year of construction: 2010, For sale CNC 5-Axis Drilling / Sinker EDM Machine – OCEAN Technologies OCT-90120CA (2010) 📝 DESCRIPTION For sale: High-precision 5-axis CNC drilling / sinker EDM machine from OCEAN Technologies Co., Ltd., model OCT-90120CA. This is a very large-capacity industrial machine, ideal for quickly drilling deep holes and machining complex cavities in the mold making, aerospace, and precision engineering industries. ⚙️ FEATURES AND TECHNICAL CAPABILITIES 📐 Travels and Machining Capabilities (5 Axes) X-axis travel: 900 mm Y-axis travel: 1,200 mm Z-axis travel (Vertical axis): 1,000 mm W-axis travel (Head guide): 350 mm Rotary axis / Dividing head (C-axis): Integrated rotary table for multi-angle positioning and machining without re-fixturing the workpiece. 🖥️ Numerical Control & System Operating system: Dedicated Windows XP Embedded. Interface: Ergonomic control panel with color screen, full industrial keyboard, speed potentiometers, and manual axis control buttons. ⚡ Electrical Specifications (Nameplate) Voltage: 400 V AC / 3 Phases / 50-60 Hz Capacity / Power: 35 KVA Overload current: 86 A Compliance: CE marking 🛠️ EQUIPMENT & INCLUDED ACCESSORIES Hjdpfozrfpxjx Agtofl Precision rotary table / chuck with grooves and fixing flanges. Complete filtration system and auxiliary chiller unit for dielectric fluid (RBSystem / Spracflo). Enclosed booth and protective housing with sliding doors. Adjustable control station and manual remote control. 📊 CONDITION & HISTORY Year of manufacture: March 2010 Serial number: DR06461209 Overall condition: Good working condition, machine is clean and maintained in a controlled industrial environment. Maintenance: Regular maintenance performed.

Year of construction: 2023, condition: like new (used), HHS cold glue applicator with 4 heads KFE-E-KP6-MEP 4x HD hose PTF-1/4″ Hedjzzar Hspfx Agtsfl + one spare head Complete unit, new price: €17,000 The unit has only been used once and is otherwise in new condition.

Year of construction: 2026, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S25Synthesi01, Stretch Winder Synthesi TECHNICAL DETAILS Turntable / base frame / Ø 2,200 mm Max. pallet dimensions: 1,550 x 1,550 mm Max. load capacity: 2,000 kg Wrapping height (pallet included) 2,200 mm FILM SLIDE TYPE "OPRS - ONE PRE STRETCH" Film pre-stretch ratio set to 200% Hedpfx Ageykub Astefl Foil application tension electronically adjustable in the programs in different steps Height of turntable 75 mm Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function & reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F00 - Screen lock program change F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Foil consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 storable winding programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) Reinforcement cycle via push button Optionally possible: Turntable size up to Ø2600 mm Mast height up to 3900mm ramp mounting frame Light scanner for black products cutting device Etc. Other systems available from the Ludwigsburg warehouse. Some images may contain options that are subject to a surcharge. Illustration similar

Condition: like new (used), functionality: fully functional, HANG 101--50 Electric Eyeletting Machine Electric single-head eyeletting machine 101--50 PiccoStar for eyelets No. 269 / 270 Ø 5.0 mm Automatic eyelet feed Suitable for paper, cardboard, plastics, etc. Ideal for contracts and certificates Punches and eyelets in a single operation (the eyelet punches the hole) Continuously adjustable rear and side stops ensure precise alignment Push button for triggering the eyeletting process With self-piercing eyelets: up to 30 sheets at 80 g/m² paper or material thickness up to 3 mm With pre-punched material: up to 50 sheets at 80 g/m² paper or material thickness up to 8 mm Weight: 36 kg / Voltage: 230 Volts / Tools / Operating manual. Hjdpfx Aowvh Alegtsfl The machine is in as-new condition.

Condition: used, Year of construction: 1995, A cap remover for removing crown caps from bottles in beer crates. Two crates are uncapped per cycle. The removed crown caps fall into a tray positioned beneath the machine. Additional title: Cap remover for crown caps with 2 uncapping heads Capacity filling line: 12000 Fl/h Formats: crown caps Running direction: left -> right Hfjdpfozg Iy Aex Agtsl Operation / Control: Simatic S5-95-U Position: in a footed stainless steel housing Base construction: straight-running Features: 2 uncorking heads, motorised crate transport, control cabinet with control buttons

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, machine/vehicle number: VT0479, VC850 travels: X850, Y510, Z510 mm High-performance milling spindle up to 12,000 rpm as a built-in hybrid spindle with direct drive, without belt Tool holder on spindle SK40 DIN69871 with pull stud DIN69872-A / ISO 7388-3-AD TOOL MAGAZINE with 32 tool stations DIRECT MEASURING SYSTEMS in X/Y/Z axis SIEMENS 840DE control with the following basic features: - SPINNER - SPIOS 24" touch panel for I4.0 applications - Control panel height-adjustable, rotatable and tiltable for best ergonomics - incl. engraving cycles - 24" liquid crystal flat color screen with multi-touch functionality Hodpfx Asy S Tpiegtsfl - User memory 2 GByte - 15 zero-point offsets - 1 free USB interface - Ethernet interface standard In the latest generation of SIEMENS "SINUMERIK ONE" control - SPINNER - SPIOS 24" touch panel for I4.0 applications - Control panel height-adjustable, rotatable and tiltable for best ergonomics - incl. engraving cycles - 24" liquid crystal flat color screen with multi-touch functionality - User memory 2 GByte - 15 zero-point offsets - 1 free USB interface - Ethernet interface standard SPINNER MULTI-CONTROL-WHEEL on the control panel, integrating the following functions into a single control element: - Handwheel function in jog mode - Feed override in automatic mode - Start button and feed influence in single-block setup mode, automatically resetting to 0% at the end of the block -> all important functions of the setup mode integrated into one control element - SHOPMILL - 3D SIMULATION - REMNANT MATERIAL RECOGNITION - DXF reader Fully integrated 1-axis TILTING TABLE, centrally mounted in the working area on the table, with: - Pivoting cheek approx. 580mm long for 3-sided machining - Swivel range of the A-tilting axis is infinite - Counter bearing to support the rotary table bridge UNIVERSAL CHIP CONVEYOR VC850 PREPARATION of the spindle FOR HIGH PRESSURE for the use of the additional tank up to 22 bar HIGH-PRESSURE TANK 22 bar Additional compressed air on the spindle head Compressed air centrally through the milling spindle, alternatively to coolant nozzle in the working area PREPARATION FOR SPINNER STANDARD MEASURING PROBE Wireless SPINDLE PROBE universal robot interface UNIROB CLAMPING HYDRAULICS incl. 2 pcs. 4/4-way VALVE for workpiece clamping up to 200 bar hydraulically STANDARD DOCUMENTATION GERMAN consisting of machine manual and CNC manuals is supplied in digital form on the control. Paper manuals available at an additional cost LIFTING LUGS for crane unloading, set consisting of 4 pcs. mandatory for crane transport STANDARD PAINTING two-tone in light gray RAL7035 and blue-gray RAL5008 Electrical design EUROPEAN STANDARD as follows: Operating voltage 3x400V +/-10% Mains frequency 50Hz (+/-2%) TN network (5-conductor) Notes: The price includes warranty services only within Germany. For new and demonstration machines, the images are not necessarily images of the individual machine, but of comparable machines. Accessories shown, such as clamping devices or tool holders, are only included in the scope of supply to the extent listed in the technical description. Ask for a detailed offer ex works. Visit our factory near Munich or one of our showrooms. We may have other offers for comparable machines. Subject to prior sale.

Condition: used, mileage: 211,000 km, power: 120 kW (163.15 HP), color: black, gearing type: automatic, Year of construction: 2020, Equipment: ABS, air conditioning, central locking, power assisted steering, - To ensure that you receive the best possible advice, we kindly request that you schedule an appointment. Mr. Kiel will be happy to assist you, Tel: CF0 Basic chassis, CL1 Steering wheel adjustable in inclination and height, CL4 Multifunction steering wheel with trip computer, D51 Partition, full-height with 1 window, E07 Hill-start assist, E34 Buffer battery for starting, EA4 Audio 40, ED4 Fleece battery 12 V 92 Ah, EL8 2-way speakers in the front, EW6 Pre-installation for Remote Services Plus, EY5 Mercedes-Benz emergency call system, F61 Interior mirror, F66 Lockable glove compartment, FKA VAN, FR8 Rear-view camera, FY7 Multi-button remote control, G42 7G-TRONIC PLUS, H20 Heat-insulating glass all around, HH9 SEMI-AUTOMATICALLY CONTROLLED CLIMATE CONTROL SYSTEM TEMPMATIC, HI1 Climate zone 1 (cold/comfort), I8H Navigation radio with DAB+, IL5 Left-hand drive, IL6 Metallic paint, IN1 Wheelbase 3200 mm, short overhang, JF1 Rain sensor, JH3 Communication module (LTE) for digital services, JK3 Instrument cluster with pixel-matrix display, JW8 ATTENTION ASSIST, JX2 Service interval 40,000 km, KB5 Main tank 70 liters, L LEFT-HAND DRIVE, LA2 Headlamp assistant, LC2 LED light strip in the cargo area, LE1 Adaptive brake light, M40 Generator 14 V/200 A, MG3 Engine OM 651 DE 22 LA 120 kW (163 hp) 3800/min, MG9 Generator management, MJ8 ECO start/stop function, MR6 Emissions class Euro 6c N1, MS1 SPEED LIMITER, MX0 BlueEFFICIENCY package, Q22 Trailer coupling, fixed ball head, QA4 Trailer load 2500 kg, S23 Front passenger seat, single seat, SA6 Airbag, front passenger, SB1 Comfort driver seat, SE5 Lumbar support, driver seat, V42 Lashing rails, side wall to roof rail, V43 Wood floor, VA2 Interior panelling, cargo area up to roof height (wood), VV0 Welding nuts, side wall for conversions, VV9 Attachment points in the roof frame, VY2 Fabric Tunja black, W65 Rear door, W78 Window in rear door with wiper and washer system Hfjdozy Iutepfx Agtol We will gladly provide you with a quote for the trade-in of your used vehicle. If you would like to lease or finance your vehicle, we will be happy to provide you with an individual offer. Mr. Kiel will be happy to assist you. IMPORTANT: Viewing only by prior arrangement! All information without guarantee, errors and prior sale reserved! Pictures are for illustration purposes only! Deviations from advertisements or other descriptions are possible, for example, due to errors, incorrect data, transmission errors! Metallic, ESP, Navigation system, Particulate filter, New MOT, Partition = Further information = Engine displacement: 2,143 cc GVWR: 2,800 kg Please contact Tobias Ebert for more information.

Condition: used, mileage: 16,700 km, power: 120 kW (163.15 HP), color: white, gearing type: mechanical, Year of construction: 2025, Equipment: ABS, air conditioning, central locking, power assisted steering, - To ensure that you receive the best possible advice, we would like to schedule an appointment for you. Mr. Kiel will be happy to assist you, Tel: BA3 Active Brake Assist, C6L Multifunction steering wheel, CF0 Basic chassis, CL1 Steering wheel adjustable in inclination and height, D50 Partition, continuous, E07 Hill Start Assist, E1D DIGITAL RADIO (DAB), E1E Navigation, E7M MBUX Multimediasystem, ED4 Fleece battery 12 V 92 Ah, EL8 2-way speakers front, F3Z Comfort closing, F66 Lockable glove compartment, F68 Exterior mirrors heated and electrically adjustable, FR1 Rear view camera not foldable, FR8 Reversing camera, FY7 Multi-button remote control, GE1 6-speed manual transmission TSG 380, H20 Heat-insulating glass all around, HH9 SEMI-AUTOMATICALLY REGULATED CLIMATE CONTROL SYSTEM TEMPMATIC, IN2 Wheelbase 3200 mm, long overhang, J2W Maintenance interval 2 years, J55 Seatbelt warning system for co-driver seat, JA7 Blind Spot Assist, JA9 Traffic Sign Assist, JB4 Active Lane Keeping Assist, JH3 Communication module (LTE) for digital services, JK5 Instrument cluster with color display, JW8 ATTENTION ASSIST, JX2 Maintenance interval 40,000 km, KB5 Main tank 70 liters, L45 MULTIBEAM LED with high beam assist PLUS, LA2 Driving light assistant, LC2 LED light strip in the cargo area, LC4 Comfort roof control unit, LE1 Adaptive brake light, LE6 Rear night lighting, LX5 Europe, M60 Generator 14 V / 250 A, M6B EMISSIONS CLASS EURO 6E-, MG9 Generator management, MJ8 ECO Start-Stop function, MK8 Speed limiter 210 km/h, MS1 TEMPOMAT, MU4 OM 654 DE 20 LA 120 kW (163 hp) 3800/min, MX0 BlueEFFICIENCY package, P4F Rating country set Euro-NCAP, Q22 Tow hitch ball head fixed, RS7 Steel wheels 6.5 J x 17, RY2 Tire pressure monitoring system front and rear, wireless, S23 Co-driver seat, double seat, SA1 Seat cushion depth adjustment driver, SA6 Airbag co-driver, SB1 Comfort driver seat, SE5 Lumbar support driver seat, SH1 Thorax-pelvis sidebag driver, SH2 Thorax-pelvis sidebag co-driver, SK2 Seat occupancy recognition driver seat, V20 Interior panelling cargo area, panels top, V30 Interior panelling cargo area, side, V43 Wood flooring, VF4 Fabric Caluma black, VV0 Welding nuts side wall for conversions, VV9 Attachment points in the roof frame, W50 Rear door double-leaf 180 degrees without window We will gladly provide you with an offer for the trade-in of your used vehicle. If you would like to lease or finance your vehicle, we will be happy to provide you with a customized offer. Mr. Kiel will be happy to assist you. IMPORTANT: Viewing only by prior arrangement! All information without guarantee, errors and prior sale reserved! Pictures are for illustration purposes only! Deviations from advertisements or other descriptions are possible, for example, due to errors, incorrect data, transmission errors! ESP, Navigation system, Particle filter, New inspection, Partition = Further information = Engine displacement: 1,950 cc GVWR: 2,800 kg Hfedpfx Aezui E Nogtsl Please contact Tobias Ebert for further information.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, spindle mount: MK 3, Meyer Geared Head Pillar Drill Model:SR25 Spindle Taper: No 3 Morse Spindle Speeds:125-2825 RPM Table Area:350 x 400mm (Hand rise and fall / Swivel) Throat:240mm Motor: 0.75 KW With: Chuck Guard Safety Brake Hfjdpfezrnndox Agtjl Low-Voltage Light Dimensions: 700 x 450 x 1900mm High Weight: 400 KGS

Condition: good (used), Code: 0370 Brand: HAFFNER - GERMANY Model: DGS 187 - CE Standard Double mitre saw with tilting blades for cutting wood, aluminum, pvc and various materials - CE Standard Hfodpeuiwqhjfx Agtjl Technical data: Blades diameter mm 500 F 30 N° 2 motors each Kw 2,2 - Rpm 2800 Cutting length max mm 3400 Cutting length min mm 230 Blades inclination 45° - 90° Electronic positioning cutting length of left cutting unit Hydropneumatic saw feed Pneumatic workpiece clamping Control panel double buttons Electronic head positioning programmer N° 2 suction ports diameter mm 120 Compressed air 6 bar Overall dimensions mm 4600 x 1300 x 1650 h Weight kg 550

Condition: new, *AVAILABLE IMMEDIATELY* Technical Data: • Brand: Brian James Hfsdpfx Aeydiibsgtjl • Model: Race Transporter 7 • Vehicle type: Car transporter • Vehicle condition: New vehicle • First registration: None yet • Roadworthiness/Inspection (TÜV): 2 years from first registration • Internal dimensions (LxWxH): 600 x 235 x 199 cm • External dimensions (LxWxH): 770 x 255 x 264 cm • Loading floor height: 58 cm • Perm. gross weight: 3,500 kg • Payload: 2,069 kg • Chassis: High loader (wheels positioned underneath the structure) • Tyres: 195/55R10C • Suspension: ALKO rubber torsion axle • Jockey wheel: Yes • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Body made from high-quality, glass fibre-reinforced plastic; lightweight yet extremely robust • Full-length daylight roof for optimal lighting inside • Manoeuvring handles front and rear • Dual front side locker doors for easy lashing of the front wheels • Dual rear side locker doors for easy lashing of the rear wheels • Large double wing side doors on left and right (direction of travel), lockable • Full-height and full-width electric rear ramp door • 2x foldable aluminium auxiliary ramps, 1.5 m, suitable for ultra-low vehicles • Rollers at the rear of the trailer • Internal height: 199 cm; rear entry height: 188 cm • Perforated lashing floor provides high slip resistance and is extremely wear-resistant, even under tough operating conditions • Numerous lashing points and a highly durable floor offer flexible securing options and excellent grip • Fully adjustable wheel stops with quick-release system, suitable for lowered vehicles • Closed composite floor panel with honeycomb-structured plastic core and surface layers on both sides: extremely light and rugged • 2x centrally recessed floor storage boxes, flush-mounted in the loading floor, ideal for storing heavy or bulky items; aluminium lids included • Electric winch, 12V with radio remote control, synthetic rope, and carabiner • Electro-hydraulic tilting of the loading platform, tiltable at the push of a button for an optimal loading angle • Central control unit for tilting function and rear ramp, in addition to remote control; includes board battery charge status display • Very sturdy welded steel frame • Frame fully hot-dip galvanized by immersion • Spare wheel with bracket mounted • Reinforced V-drawbar, extremely robust • ALKO overrun brake and parking brake • Automatic reverse function • Steel cast coupling head with integrated ALKO high-security lock • Plastic mudguards • 13-pin plug • LED interior lighting with LED strip • Reverse light • Large fully LED safety lighting • Side LED reverse lights • LED work lights at the rear for improved visibility when loading and unloading • Integrated rear fog light • Various marker lights—front, side, and rear • Anthracite aluminium alloy wheels • Heavy duty jockey wheel • 5-year chassis warranty • 4 wheel securing straps for lashing over wheels Optional accessories available – please enquire! New vehicle with warranty and roadworthiness certificate. We would be happy to offer you suitable financing! - Financing or leasing available - Nationwide delivery possible - All prices include VAT - Vehicle registration document pre-shipping possible or temporary number plates (Germany) can be provided - Export plates including customs declaration available - Errors, omissions, and prior sale excepted -

Condition: new, functionality: fully functional, Year of construction: 2026, laser power: 12,000 W, travel distance X-axis: 2,030 mm, travel distance Y-axis: 4,050 mm, travel distance Z-axis: 370 mm, DESCRIPTION ST4 High-powered Fiber Laser Cutting Machine The ST Series is a high-powered fiber laser cutting machine independently developed and produced by Baison Laser, suitable for cutting metal sheets such as carbon steel, stainless steel, aluminum alloy, titanium alloy, and galvanized aluminum-zinc. It meets various cutting needs for medium and thick sheet metals. Technical specifications Features • Electric Control for door and platform. Flexible and Efficient • Dual monitoring LCD displays (video cameras + controller) Hfedoxfq Sxepfx Agtjl • Loading weight up to 2.500 kgs • Fully Enclosed Protective Cover with CE • Back panel control for pallet with emergecy button • Auto-focus laser head with automatic detection • Industial components with high durability • Emergency botton on remote control Processing Format & Working Range Processing Area (L×W): 4.050 x 2.030 mm X-axis Stroke: 2.030 mm (1.7 kW motor) Y-axis Stroke: 4.050 mm (2 x 2.4 kW motors) Z-axis Stroke: 370 mm (0.75 kW motor) Max Single Lifting Platform Loading: 2.500 kg Accuracy X/Y Axis Positioning Accuracy: ±0.03 mm/m X/Y Axis Repositioning Accuracy: ±0.03 mm Speed Max. Moving Speed: 120 m/min Max. Acceleration Speed: 1.5 G Power Parameters Power Supply: 62.8kW/97A (380V/50Hz/3Phases) Protection Grade: IP54 Weight & Size Machine Size: 10.615*3.540*2.520 mm Machine Weight: 9.000 kg

Condition: like new (used), Year of construction: 2016, Jung Supromatic JF 520 Jung Supromatic JF 520 Surface Grinding Machine, year of manufacture 2016, very good general overhauled original condition. The machine comes from the technical center of a renowned German mechanical engineering company. Technical Data: Year of manufacture: 2000 Technical Data: Clamping area (L x W in mm): 600 x 200 Grindable area (L x W in mm): 600 x 250 Max. magnet size mm: 500 x 200 Max. grinding wheel dimensions mm: 225 (250) x 25 x 51 Distance table/spindle center mm: Max. 400 Table longitudinal feed traverse m/min: 1 – 20 Creep feed mm/min: 0 – 500 Grinding spindle drive speed RPM: 800 – 4200 Power kW (with creep feed): 1.6 – 2.2 Machine weight approx.: 2.0 t Accessories and Equipment: Magnet Coolant system Machine feet Grinding wheel About the machine: We are offering a Jung Supromatic JF 520 surface grinding machine, year of manufacture 2016, in very good condition. The machine is, of course, fully operational and has completed approx. 50 operating hours since overhaul. All slides move very smoothly and evenly. Even at high speeds, the Jung runs very quietly. This newer generation of surface grinding machines is very user-friendly and can achieve surfaces with a low Rz value. Take the opportunity to inspect this machine under power on site and see for yourself its condition. Scope of overhaul: Mechanical scope: Mechanical basic overhaul Hydraulics Feed Lubrication Cross and vertical adjustment Grinding spindle Dresser Painting to new-machinery quality Geometric scope: Hedpfx Aoy Naw Ijgtjfl Guideway grinding at the manufacturer’s facility (optional) Scraping of the guideways Column pull, measurement, possible re-scraping/grinding, adjusting with pressure stones, check and pattern guideways Setting of cross-grinding on spindle head Aligning the dresser Regrinding the table and magnet Machine acceptance to manufacturer's inspection checklist Electrical scope: Renewal of complete electrics, all limit switches and buttons Conversion of X-axis from cam switch to contactless limit switches New control cabinet RSF position display (2- or 3-axis readout) Holding force regulation for 24V or EP-magnetic chuck Control system modernization New auxiliary control cabinet (control panel top right) Thyristor control for grinding spindle drive Manual cylindrical dressing with head or side dresser (for Diaform operation)

Condition: used, maximum load weight: 29,990 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 06/2024, loading space volume: 52 m³, total width: 2,550 mm, Year of construction: 2024, Equipment: ABS, Chassis type: V-Chassis Kingpin load National (t): 12 Axle load National (t): 8 Axle spacing (mm): 1310-1310 Fifth wheel height (mm): 1150 Chassis width (mm): 1400 Loading width (mm): 2475 Chassis series: 090 Technically permissible total weight: 39=12+9+9+9 Internal height front (mm) (IHF): 2165 Internal height rear (mm) (IHB): 2165 Volume (m³): 51.8 Overall width (mm): 2550 Wheelbase (mm) (WB): 6800 Overall length (mm): 10656 Chassis Chassis material: Aluminium Tire size: 385/65R22.5 Loading length (mm): 9665 Axle manufacturer: JOST (STAS manufacturer choice) Wheel offset (ET): 120 Option: 1st axle with lift axle and traction aid Activation of traction aid via button in the truck (installation of button not included in standard equipment) and by pressing the brake pedal three times Option: 3rd axle with lift axle and Optiturn Activation of additional lift axle control via Wabco Smartboard Brake pad wear indicator connected Tire pressure monitoring: Wabco Trailerpulse Air suspension: ECAS with lift and lower valve Automatic lowering of air suspension during tipping operation, can be manually locked via Smartboard as well as via switch on the chassis Pneumatic coupling head: European palm coupling Tire brand: Manufacturer's choice Wheels: Alcoa Dura Bright Type of tires: Regional distance Wheel nuts: Open Wheel nut caps: Chrome with STAS logo Landing gears: Weweler, steel gearbox landing gears, type Weweler, with compensation feet, single-side operation and 2 speed levels Underrun protection operation: Manual Mudflap underrun protection: Black with STAS logo, mounted across the full width of the underrun protection Mudflap underrun protection attachment: Fixed Underrun protection cover: With covers Handle on underrun protection Control console: EBS control on the left in direction of travel, in front of the axles Toolbox Position toolbox: Left in direction of travel, in front of axles Toolbox material (left, in front of axles): Plastic Toolbox dimensions (left, in front of axles): 860x520x500 Fender type: Domar STAS with white line Number of mudflaps on fender: 2 pcs Fender mudflap type: Clear Pass Lighting manufacturer: Aspöck Lighting type: ECOLED II Work lights (activated by switch): 2 pcs LED reversing lights at rear left and right, mounted on the last cross member of the chassis (controlled by reversing signal) Work light position (activated by switch): 2 pcs LED reversing lights left and right at the front in direction of travel, mounted in the area of the landing gears Tipping cylinder manufacturer: Hyva (STAS manufacturer choice) Type of tipping cylinder: Hydraulic cylinder with large casing Tipping cylinder angle: Normal ±47° Hfodpsupqi Esfx Agtsl Tipping cylinder model: Hyva - FC 169 Tipping cylinder stroke: 7130 Tipping cylinder max. pressure: 250 Cylinder stage surface treatment: Standard treatment Hydraulic coupling: Rotary coupling Hydraulic coupling size: 1 Hydraulic coupling gender: Female Hydraulic coupling hose: 2,500 mm Smartboard type: Standard Air connection: Left in direction of travel, on lamp bracket Aluminum access ladder: 3 m - right in direction of travel Mounting of access ladder: for rear entry with hooks for hanging Broom and shovel holder: Three holders each, mounted on the chassis to the left in direction of travel Two plastic wheel chocks incl. holder Chassis-to-body securing device: Rubber cushions (not for FSS 74 and 86) Air and electrical console: Mounted on the right in direction of travel Body A-board on tipper (not f

Condition: used, mileage: 8,300 km, power: 120 kW (163.15 HP), color: grey, gearing type: automatic, Year of construction: 2025, Equipment: ABS, air conditioning, central locking, power assisted steering, - To ensure you receive the best possible advice, we kindly request that you schedule an appointment. Mr. Kiel will be happy to assist you, Tel: B25 Parking brake, electric, BA3 Active Brake Assist, BB6 Brake booster failure compensation, BB7 CO2-optimized braking system, BH1 HOLD function, C6L Multifunction steering wheel, CL1 Steering wheel adjustable in inclination and height, CM2 Bumpers and attachments painted in vehicle color, D50 Fixed partition, E07 Hill-start assist, E1D DIGITAL RADIO (DAB), E4S Smartphone Integration Package, E7B DIGITAL EXTRA: PRE-WIRING FOR NAVIGATION, E7M MBUX Multimediasystem, ED4 Fleece battery 12 V 92 Ah, EL8 2-way front speakers, EY5 Mercedes-Benz emergency call system, EY6 Breakdown management, F3Z Comfort door closing, F64 Exterior mirrors electrically foldable, F66 Lockable glove compartment, F68 Exterior mirrors heated and electrically adjustable, FKA PANEL VAN, FY7 Multi-button remote control, G011 TRANSMISSION CODE VERSION 11, G43 9G-TRONIC, GA7 TRANSMISSION AUTOMATIC TORQUE 700NM, H16 Seat heating for driver, H20 Heat-insulating glass all around, HH9 SEMI-AUTOMATICALLY REGULATED CLIMATE CONTROL SYSTEM TEMPMATIC, HI1 Climate zone 1 (cold/comfort), IB6 Model series C447 Vito/V-Class, IL5 Left-hand drive, IL6 Metallic paint, IN2 Wheelbase 3200 mm, long overhang, J55 Seatbelt warning system for passenger seat, JA7 Blind Spot Assist, JB4 Active Lane Keeping Assist, JB7 Parking package with reversing camera, JH3 Communication module (LTE) for digital services, JK5 Instrument cluster with color display, JS2 Intelligent Speed Assist, JW8 ATTENTION ASSIST, JX2 Service interval 40,000 km, KB5 Main tank 70 liters, KP7 Exhaust gas purification SCR Generation 4, L LEFT-HAND DRIVE, L45 MULTIBEAM LED with Highbeam Assist PLUS, LA2 Headlamp Assist, LC2 LED light strip in the cargo area, LE1 Adaptive brake light, LG4 Tail lights, brake lights and turn signals in LED technology, M3E Suction fan, electric, performance level 5, M60 Generator 14 V / 250 A, M6B EMISSIONS STANDARD EURO 6E-BIS N1, M72 Vehicle compatible with HVO, MG9 Generator management, MJ8 ECO Start-Stop function, MK8 Speed limiter 210 km/h, MS1 Cruise control, MU4 OM 654 DE 20 LA 120 kW (163 hp) 3800/min, MX0 BlueEFFICIENCY package, Q22 Trailer coupling, ball head fixed, QA4 Trailer load 2500 kg, RY2 Tire pressure monitoring system on front and rear axles, wireless, S23 Passenger seat, single-seater, SA1 Seat cushion depth adjustment driver, SA6 Airbag passenger, SB1 Comfort driver's seat, SE5 Lumbar support driver's seat, SK2 Seat occupancy recognition driver's seat, V43 Wood floor, VA2 Interior paneling, cargo area up to roof height (wood), VF4 Fabric Caluma black, VV9 Load securing rail system, VV9 Anchoring points in the roof frame, W65 Rear tailgate We would be happy to provide you with an offer for the trade-in of your used vehicle. If you would like to lease or finance your vehicle, we will be happy to provide you with an individual offer. Mr. Kiel will be happy to assist you. Hjdozyf D Sepfx Agtofl IMPORTANT: Viewings only by prior arrangement! All information without guarantee, errors and prior sale reserved! Pictures are for illustration purposes only! Deviations from advertisements or other descriptions are possible, for example, due to errors, incorrect data, transmission errors!

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), machine/vehicle number: S23SFERA05, Mobile stretch winder ATLANTA SFERA Easy TECHNICAL DETAILS: two maintenance-free AGM batteries 12 V - 100 Ah connected in series 160 pallets per charge - charging time: 8 -10 hours High frequency battery charger with LED indicator Wrapping height “machine with MAST (pallet included) 2,150 mm Height query via light button or by entering dimensions on the display Protective bar for emergency stop of the travel drive Emergency stop switch according to CE regulations Acoustic warning signal and warning light when the machine starts Fall protection for the film slide Push button for start & stop Function of the machine according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL: All function parameters can be set via the display F00 - Screen lock program change F02 - Adjustable machine speed around the pallet up to 80 m/min Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min Hodpjykty Defx Agtefl F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Pallet wrapping height setting F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F17 - F20 - Foil pre-stretching foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Display foil consumption (option for PRS - PS) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL: 6 storable wrapping programs for SFERA EASY F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F21 - Wrapping cycle for large pallets F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) FILM SLIDE TYPE “FM” WITH MECHANICAL BRAKE Brake can be adjusted manually from the carriage by means of a tension roller Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Optional: stretch film with core Ø50mm or coreless stretch film Standard connection values: 230 V - 1L+N+PE - 50 HZ Optionally available: -winding height up to 3500mm -FILM CARRIAGE TYPE “FE” (ELECTROMAGNETIC BRAKE) - FILM CARRIAGE TYPE “OPRS - ONE PRE STRETCH" 200% -FILM CARRIAGE TYPE “PRS” (POWER ROLLER STRETCH) 200% - FILM SLIDE TYPE “PS” (POWER STRETCH) 120-400% -Automatic line formation to strengthen the winding .Automatic system for cutting the film in 3 strips for “BANDEROLL WRAPS” - Machine version for temperatures down to -5° C -BATTERIES LITHIUM RELION 2 x 12V Other systems available from the Ludwigsburg warehouse. Illustration similar.

Condition: used, mileage: 9,500 km, power: 120 kW (163.15 HP), color: silver, gearing type: automatic, Year of construction: 2025, Equipment: ABS, air conditioning, central locking, power assisted steering, - To ensure you receive the best possible advice, we kindly request that you schedule an appointment. Mr. Kiel will be happy to assist you. Tel: Hjdpfx Agszwltzstefl B25 Parking brake, electric, BA3 Active Brake Assist, BB6 Brake booster failure compensation, BB7 CO2-optimized brake system, BH1 HOLD function, C6L Multifunction steering wheel, CF0 Basic chassis, CL1 Steering wheel adjustable in inclination and height, CM2 Bumpers and attachments painted in vehicle color, D50 Fixed partition, E07 Hill start assist, E1D DIGITAL RADIO (DAB), E4S Smartphone Integration Package, E7B DIGITAL EXTRA: PREPARATION FOR NAVIGATION, E7M MBUX Multimediasystem, ED4 Fleece battery 12 V 92 Ah, EL8 2-way front speakers, EW6 DIGITAL EXTRA: REMOTE SERVICES PLUS, EY5 Mercedes-Benz emergency call system, EY6 Breakdown management, F3Z Comfort door closing, F64 Exterior mirrors electrically foldable, F66 Lockable glove compartment, F68 Exterior mirrors heated and electrically adjustable, FR1 Rear camera not foldable, FY7 Multi-button remote control, G43 9G-TRONIC, GA7 GEAR AUTOMATIC TRANSMISSION TORQUE 700 NM, H16 Seat heating for driver, H20 Heat-insulating glass all around, HH9 SEMI-AUTOMATICALLY CONTROLLED CLIMATE CONTROL SYSTEM TEMPMATIC, IL5 Left-hand drive, IL6 Metallic paint, IN2 Wheelbase 3200 mm, long overhang, J55 Seatbelt warning for passenger seat, JA7 Blind Spot Assist, JB4 Active Lane Keeping Assist, JB7 Parking package with reversing camera, JH3 Communication module (LTE) for digital services, JK5 Instrument cluster with color display, JS2 Intelligent Speed Assist, JW8 ATTENTION ASSIST, KB5 Main tank 70 liters, KP7 Exhaust gas purification SCR generation 4, L45 MULTIBEAM LED with high beam assist PLUS, LA2 Headlamp assist, LC2 LED light strip in the cargo area, LE1 Adaptive brake light, M3E Suction fan, electric, performance level 5, M60 Generator 14 V / 250 A, M6B EMISSION CLASS EURO 6E-BIS N1, M72 Vehicle compatible with HVO fuel, MG9 Generator management, MJ8 ECO start/stop function, MK8 Speed limiter 210 km/h, MS1 Cruise control, MU4 OM 654 DE 20 LA 120 kW (163 hp) 3800/min, MX0 BlueEFFICIENCY package, Q22 Trailer coupling, ball head fixed, QA4 Trailer load 2500 kg, RG7 Tires 225/55 R17, RS7 Steel wheels 6.5 J x 17, RY2 Tire pressure monitoring on front and rear axle, wireless, S23 Passenger seat, single seat, SA1 Seat cushion depth adjustment, driver, SA6 Airbag, passenger, SB1 Comfort driver seat, SE5 Lumbar support, driver seat, SK2 Seat occupancy recognition, driver seat, V43 Wooden floor, VA2 Interior lining, cargo area up to roof height (wood), VF4 Fabric Caluma black, VV9 Load securing rail system, VV9 Attachment points in the roof frame, W54 Rear doors, double-leaf, opening to the side We would be happy to provide you with an offer for the trade-in of your used vehicle. If you would like to lease or finance your vehicle, we will be happy to provide you with an individual offer. Mr. Kiel will be happy to assist you. IMPORTANT: Viewing only by prior arrangement! All information without guarantee, errors and prior sale reserved! Pictures are for illustration purposes only! Deviations from advertisements or other descriptions are possible, for example due to errors, incorrect data, transmission errors!

Condition: used, saw blade diameter 350 mm capacity 90 degrees: round 120 mm capacity 90 degrees: square 110 mm capacity 90 degrees: flat 200x88 mm capacity 45 degrees: round 115 mm capacity 45 degrees: square 110 mm capacity 45 degrees: square 150x80 mm total power requirement 1,5/1,8 kW weight of the machine ca. 0,59 t dimensions 1,1 x 0,95 x 1,7 m New machines SPECIAL PRICE includes: - Starter Kit 2 - Micro-spraying system Ready for demonstration in our showroom!! Roller conveyors optional!! Hydropneumatic fully automatic · Miter Left/Right · Bevel head cuts up to 45° (shifter) a. b. · Pneumatic vertical clamping device · Vice before and after the saw blade for low-burr cuts · Material hold-down roller · Integrated coolant spray device · Swarf suction nozzle on the saw blade protective hood · Single feed 530 mm · Section length min. 4 mm max. 9,999 mm For profile cuts, the use of our B & S Coolmatic Plus is mandatory necessary. CNC Control: · With button for over 90 different sawing programs with 99 sub-programs for length, quantity and angle Hjdped Iinyofx Agtsfl · Automatic feed unit 2,000 mm via ball screw Incremental feed with automatic length compensation. Adjustable for cutting lengths from 25 - 9,999 mm. · Fully hydraulic control of saw frame and clamping devices · Pre-selection of 3 different material feed speeds · Visualization of the entire workflow with simple data entry

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Soraluce model FL8000 high performance travelling column, floor type CNC milling machine TRAVEL (X) 7,500 mm TRAVEL (Y) 1,400 mm TRAVEL (Z) 1,000 mm RAPID TRAVERSE (X,Y,Z) 25,000 mm/min WORKING FEED RANGE (X,Y,Z) 1 – 10,000 mm/min ACCELERATION RATE (Instantaneous not maximum) 1 m/sec2 SPINDLE SPEED 20 - 4,000 Rpm SPINDLE TAPER ISO 50 SPINDLE POWER 28 Kw NC15C - HEIDENHAIN iTNC 530 (Flat 15.1" TFT Screen with digital drives). Single processor version. Prepared for a machine of 10 motors (9 CNC axes + spindle motor). Main push button panel with individually operated push buttons for linear axes (X+, X-, Y+, Y-, Z+, Z-) K20 option for the i530M. Independent AC. Heidenhain digital drive servomotor for each axis HEIDENHAIN HR-410 portable electronic handwheel with 5m spiral cable Automatic Indexing head 28Kw, 760Nm, 0.001°x 0.001°, 4000 Rpm. Continuous air and oil mist lubrication system for head gears. Automatic Tool Clamping device – 15,000N. Automatic hydraulic tool releasing device Spindle taper: BT50 High Torque spindle motor 28kW, 100% ED, digital motor. R10 – ZF gearbox two speed including cooling unit Spindle Speed Range 20 – 4,000Rpm Hodpfx Agjw U Tlzstofl Rapid Feed X-Y-Z axes 25.000mm/min Working Feed range X-Y-Z axes 0 - 10.000mm/min Acceleration rate X- Y -Z axes 1 m/s2 (instantaneous, not maximum) Hydraulic counterbalance system for head/ram assembly X axis driving system by two servomotors, two gearboxes and a double rack & pinion Preloaded ballscrews with double recirculating nuts in Y and Z axes. Automatic centralized lubrication system. Linear Guiding System with recirculating cylindrical rollers in each axis. Automatic centralized lubrication system for the guides. HEIDENHAIN Linear measuring scales in X-Y-Z axes with compressed air purge system - (Precision +/- 0,005mm) H48 – Coolant through the spindle type AD. M3 – Automatic tool changer 40 stations. M6 – Horizontal-vertical tool changing facility. M8 – Motorized tool changing device. Tool changer is driven by a servo motor Hydraulic equipment Front metallic roller blind cover to both upper and lower ram area, together with metallic protection to the lateral side of the column, between the machine table and the rear guideway support, which protects the vertical movement of the ram. CE10 - PROTECTION on the back and both lateral sides of the machine column P20 - Operator's platform fixed to the column and travels together with it in the "X" axis direction. The main operator’s panel is mounted within the operator's platform area for machines without an operator’s pendant and is accessed from the rear of the machine. D7 + D50A - Coolant system with 1000L capacity tank with two pumps providing high and low pressure providing 5 & 12bar and 50L/min flow rate. Paper and Magnetic filtering. E30A – swarf conveyor FL8000 Hinge conveyor belt. Width 350mm PW11B – Pendulum working area system. PM2 x 2 – Machine prepared by Soraluce for the inclusion of two rotary tables. Working area lighting. Electrical cabinet cooling system Electrical cabinet lighting Working methods - According to CE safety regulations Filter to assure electromagnetic compatibility. Protection to both sides of the column with security bumpers Anchoring Bolts Standard Colour - Blue RAL 5005 / Grey RAL 7035 K19 – Two sets of machine documentation (One hard copy, one on CD ROM) Floor plate 8,000 x 1,500 x 300mm

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S23NEOS04, Exhibition facility Stretch winder ATLANTA NEOS ARYA system for automatic foil blowing and cutting. 99 programs can be saved individually Hfsdpfxsykug Sj Agtel With 1 remote control - optionally more possible Winding height 2150mm Mast height 2050 mm (fits through almost every door) Foil power stretch 120-400% Motorized pre-stretching system with stepless adjustment Adjustable pre-stretching ratio from 120 to 400% via control panel Foil application tension electronically controlled via control unit Fast loading system IEF for easy changing of foil rolls Foil specification Max. outer diameter Ø300mm - height = 500mm - core Ø76mm Automatic foil cutting unit Tension of the film can be saved in 4 steps TECHNICAL DETAILS: two maintenance-free AGM batteries 12 V - 100 Ah connected in series At least 160 pallets per load - loading time: 8 -10 hours High frequency battery charger with LED indicator Wrapping height “machine with MAST (pallet included) 2,150 mm Height query via light button or by entering dimensions on the display Protective bar for emergency stop of the travel drive Emergency stop switch according to CE regulations Acoustic warning signal and warning light when the machine starts Fall protection for the film slide Push button for start & stop Function of the machine according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL: All function parameters can be set via the display - Screen lock program change - Adjustable machine speed around the pallet up to 80 m/min Lifting carriage speed can be adjusted up and down independently of each other - Lifting carriage speed from 1.3 up to 5.4 m/min - Lifting carriage speed down from 1.3 to 5.4 m/min - Number of wraps on the pallet foot (1 - 10 wraps) - Number of wraps on the pallet head (1 - 10 wraps) - Adjustment of pallet wrapping height - Foil application tension foot & head winding / ascent & descent independently adjustable - Foil pre-stretching foot & head wrapping / ascent & descent independently adjustable - Ergonomic height for foil change ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL: 99 storable winding programs for SFERA EASY - Cross winding (up/down) - Simple winding (only up or only down) - Wrap cycle with preset start and stop height - Winding to a stored height (switching off the light button for the height) - Wrapping cycle for large pallets - Winding cycle for cover sheet film - Soft start cycle for application of edge protection - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) Other systems available immediately from the Ludwigsburg warehouse

Condition: as good as new (ex-display), Year of construction: 2011, operating hours: 2,500 h, functionality: fully functional, machine/vehicle number: ----, working range: 4,500 mm, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 250 mm, workpiece weight (max.): 8,000 kg, type of input current: AC, input voltage: 400 V, sheet thickness aluminum (max.): 150 mm, table length: 4,500 mm, operating speed: 20,000 mm/s, table width: 2,400 mm, tank capacity: 8,000 l, pressure: 4,150 bar, positioning speed: 40 m/min, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 20 m/min, rapid traverse Z-axis: 15 m/min, table height: 1,100 mm, operating pressure: 4,150 bar, warranty duration: 3 months, input current: 60 A, cutting speed: 20,000 mm/min, travel speed (max.): 40,000 mm/min, year of last overhaul: 2024, overall weight: 6,000 kg, power: 44.13 kW (60.00 HP), Water cutting machine from showroom. 2 head water cutting machine CMS Tecnocut Easyline Hjdpfx Asq U Irmegtefl 1 2D head with 250 mm Z-axis range 1 head 3D with 150 mm Z-axis range, A-axis range +/- 274 degrees, B-axis +/- 62 degrees, full 3D control , no 2.5D like many other machines Fully interpolated heads, so controlled via CNC and not manually coupled Cutting range: X-As: 2,000 mm Y-As: 4,000 mm Z-As: 250 / 150 mm A-As: +/- 274 degrees B-As: +/- 62 degrees Options: - 5-As cutting head - extra 2D cutting head - Chain discharge for abrasive - Anti-collision sensors on both heads More details / official quotation on request 60HP Jetpower EVO pump with as much as 5 L/min capacity ( liters bring cutting speed ) max pressure 4150 bar. We are since 13 years official CMS dealer Perfectly maintained and technical condition 100% Machine will be delivered in new condition, pictures are during last use We give 6 months warranty on this machine Rent / Lease / all in lease is also negotiable

Year of construction: 2019, condition: used, functionality: fully functional, machine/vehicle number: ADS550×5000, For sale: Fenstek ADS550×5000 CNC-controlled double-head cutting saw from 2019 for the precise cutting of aluminum profiles. The machine is suitable for series production of profiles for windows, doors and facade systems. The two saw heads can operate independently or synchronously. The moving saw head is automatically positioned via a servo system. Key benefits: - Fully CNC-controlled - Two saw heads operating independently or synchronously - Automatic servo positioning of the moving saw head - Automatic height measurement system for precise cuts below 45° - Touchscreen operation - Integrated label printer for product identification and traceability - Infinitely adjustable saw feed - Heavy and stable machine bed Technical specifications: - Power supply: 380–420 V / 50 Hz - Total power: 5.5 kW - Saw motors: 2 × 2.2 kW - Saw blade diameter: 550 mm - Maximum cutting length: 5,000 mm - Minimum cutting length at 90°: 360 mm Hodpfx Agox R U Epotjfl - Cutting angles: 45° and 90° - Repeat accuracy: ±0.1 mm - Air consumption: 60 l/min at 0.5–0.8 MPa A complete double-head cutting saw for companies that want to process aluminum profiles quickly, reproducibly and accurately.