Used Briquett Bagging Maschine for sale (3,900)

Condition: used, Year of construction: 1998, Vacuum machine Multivac, floor-standing unit, fully functional, with gassing function / protective gas system, used, year of manufacture: 1998. Customer service performed: oil change, welding wire, sealing band—all in very good condition. VAT deductible. Invoice with indicated VAT. Fgodpfew Edzpox Afish

Condition: as good as new (ex-display), operating hours: 40 h, functionality: fully functional, total length: 1,685 mm, total width: 745 mm, total height: 1,590 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 70 rpm, overall weight: 512 kg, Used only for demonstration purposes. Fedpfx Asxivf Ejfiogh

Condition: excellent (used), Year of construction: 2023, operating hours: 1,851 h, functionality: fully functional, pressing force: 70 t, filling opening width: 1,100 mm, filling opening length: 1,400 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 500 kg, overall weight: 17,000 kg, oil tank capacity: 70 l, Technical data baler: Fgodpfxou Thbxj Afioh Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Germany Type AVOS 1410 BS-22/50 Year of construction 2023 Pump operation hours 1,851 hours, as of July 24 Press power main press 70 t (a 70 tonne hydraulic cylinder is installed, special equipment) Specific press force 90,9 N/cm² (a 70 tonne hydraulic cylinder is installed, special equipment) Feed channel 1,400 x 1,000 mm Theoretic cycle time 13 sec Theoretic throughput capacity 266 m³/h Bale size 1,100 x 750 (w x h), the length is variable Drive power 22 kW Connected load 65 kW Tying system 4-fold, vertical, fully automatic Throughput capacity at a bulk weight of 30 kg/cbm approx. 5,5 t/h bulk weight of 50 kg/cbm approx. 7,5 t/h bulk weight of 100 kg/cbm approx. 9,7 t/h Bale weight with a bale length of approx. 1.2 m up to 500 kg, depends on material SPS controller Siemens S7-1500 Operating panel Schneider Harmony Baler dimensions built up 8,610 x 2,400 x 3,835 mm (l x w x h) Transport weight baler approx. 17 t Special equipment: Wear-resistant floor made of HARDOX steel Larger main hydraulic cylinder with 70 tonnes of pressing force Special press ram for pressing loose bulk materials with small grain sizes OptiCut XS system for lower cutting forces and higher throughput rates Special pressing piston for pressing "difficult" materials Technical data for the conveyor belt: Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Deutschland Type KGF GB 1500 Year of construction 2023 Drive power 4.0 kW Belt speed approx. 0.3 m/second Length feeding conveyor 2,679 mm Length elevating conveyor 6,866 mm Length goose neck 1,272 mm Grade 35° Effecting width 1,400 mm Side wall height 800 mm Carrier height 50 mm Carrier distance 750 mm Belt quality EP 400/3, 3:1 (DIN quality N) Overall height 4,515 mm Overall transport dimensions11,148 x 2,502 mm (l x w) Technical data on the non-contact personal protection system: Manufacturer BOREMA Umwelttechnik AG, Switzerland Type APSS iBOR 22 Year of construction 2023 Condition of the press system: The entire system is in very good condition due to the short operating time of only 1,851 pump hours and the processing of only paper, cardboard and film. Scope of delivery: Avermann baler, type AVOS 1410 BS-22/50, incl. wire drawing stations and bale chute Avermann conveyor belt, type KGF GB 1500 BOREMA personal protection system, type APSS iBOR 22 Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: new, The VHF 1.1 is a compact and versatile Conventional Vertical Milling Machine in the Universal Milling Machines category, designed by KNUTH. This universal milling machine boasts a robust frame made of vibration-dampening cast iron, ensuring stability during operations. Equipped with a horizontal spindle and a swiveling vertical milling head, the VHF 1.1 allows for infinitely variable spindle speed and feed on the X-axis, making it ideal for diverse applications in training departments, repair shops, and model-making workshops. Its 1.000 x 240 mm setup area and 535 mm travel on the X-axis facilitate various machining tasks, while the included coolant system and chip tray enhance functionality and cleanliness. Users benefit from the extensive standard equipment, which includes a 3-axis position indicator, drill chuck, reducing sleeves, and more. With its precise and powerful performance, the VHF 1.1 is an outstanding choice for anyone in need of a reliable milling machine. Don’t hesitate to request a quote and elevate your milling capabilities today! Fgodjuyh Egopfx Afioh

Condition: good (used), Year of construction: 1995, functionality: fully functional, machine/vehicle number: 620571, color channels: 2, HEIDELBERG SM 74-2-P 1/1 ; 2/0 74x52 cm Alcolor dampening system Autoplate Plate punch/bender In production Fsdpfx Afswtyfgeijgh Good working condition

Condition: used, Portal milling machine, used. The machine is operational. 5-axis CNC control X-axis (support) Y-axis (table = movable platen field) Z-axis (ram) W-axis C-axis on the ram Tool spindle in the ram Dockable tool heads (can be docked to the C-axis on the ram) 1x fork-type milling head (A-axis) 1x 90° angle head 1x short extension 1x long extension Machine frame (2 columns, crossbeam, girder) - Machine bed: 13,000 mm - Machine table: 6,000 x 3,000 mm, max. workpiece weight (6,400 kg/m²) Portal clearance: Height x width: 3,000 x 3,370 mm Distance between clamping surface and lower edge of milling head: 0/1,600 mm - Height-adjustable crossbeam - CNC control (Heidenhain) - Fork-type milling head – 2-axis controlled (C-axis, A-axis) - Electrical equipment: 3x400 V/50Hz - 1 main spindle drive motor (Heidenhain, 50 kW) - Servo motors (X, Y, and Z) Heidenhain - Air-conditioned electrical cabinet - Metric configuration - Coolant system - Band filter system with high-pressure pump - 2 hinged belt chip conveyors - Paint (RAL 7035, etc.) - Standard accessories Fodpfewz H E Asx Afiegh - CE compliant

Condition: good (used), Year of construction: 2009, functionality: fully functional, number of straightening rollers: 7, coil weight: 4,000 kg, coil outer diameter: 1,500 mm, number of feed rollers: 2, straightening roller diameter: 80 mm, coil width: 600 mm, 1. Decoiler Type: MS 4000 Coil weight: max. 4.000 kg Strip width: max. 600 mm Outer diameter: max. 1.500 mm Inner diameter: 475 – 535 mm Execution: • Hydraulic expansion • Hydraulic pressure arm from top with hydraulic driven roll Rolle • Lateral swivel in roll on front side, disc at back side and additional 3 pc. single arms for coil keeping • Mandrel driven by electric motor, control by light sensor • Decoiler moveable for loading by hydraulic • Coil loading table 2. Straightening maschine Type: MR 58 Fsdeq A Tw Ropfx Afiogh Strip width: max. 600mm Stock thickness: 0,8 – 3,6 mm at rigidity 400 N/mm2 Straightening rolls: 7 pc., supported Pulling rolls: 2 pc. Diameter of rolls: 80 mm Speed: 5 – 30 m/min Execution: • Hardened and ground rollers • Pneumatically lifted feed roller • Straightening rollers adjustable as a block • Lateral strip guiding at infeed, manually adjustable via hand crank • Hydraulic strip insertion aid (support table, extendable tongue and pressure roller from above) • Straightening head can be opened (alligator mouth) • Ultrasonic sensor for loop control • Swivel control panel • Siemens S7-200 control system

Condition: new, Year of construction: 2024, working width: 600 mm, saw blade bore: 70 mm, max. cutting height 160 mm max. cutting width 600 mm feed 5-30 m/min. Saw motor 55 KW Fgodpovcn D Refx Afioh feed motor 2,2 kW max. saw blade insert at 145 mm 6 Saw shaft diameter 70 mm CE compliant design Control cabinet and control panel Weight 3,200 kg Special equipment - Electric height adjustment of the feed rollers

Condition: excellent (used), Year of construction: 2010, operating hours: 56,748 h, functionality: fully functional, overall weight: 5,400 kg, rotor width: 1,600 mm, power: 45 kW (61.18 HP), rotational speed (max.): 107 rpm, rotor flight circle: 380 mm, working width: 1,600 mm, blade width: 40 mm, Technical data shredder: Manufacturer ZENO Zerkleinerungsmaschinenbau Norken GmbH Type ZTLL 1400 x 1600 Year of construction 2010 Operating hours 56,748 hours Inlet cross-section 1400 x 1600 mm Main drive power 45 kW Rated current 81 A Hydraulic slide gate drive 2.2 kW Rotor flight circle 380 mm Rotor speed approx. 107 rpm Number of cutting tools 52 knives, 40 x 40 mm, with tool holders Screen perforation 40 mm Weight approx. 5400 kg Scope of delivery: Only the shredder with control cabinet is for sale. The discharge conveyor belt and the air conveyor system are not included in the scope of delivery. Remark: The shredder was used for shredding nonwovens and needle felts etc. and is in good, immediately usable condition. The machine is being replaced by a larger shredder due to its low throughput capacity. The machine is currently still assembled and can be inspected under power. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors. Fedpfxou Thabe Afiegh

Condition: good (used), Year of construction: 1988, Impressions: 40 million Printing Units: 5 Colors Sheet Size (Max): 360 × 520 mm Configuration & Features: 5 Colors, straight Alcolor dampening system Manual plate loading Low pile delivery Domestic UV independent dryer No damages on impression cylinders The machine is in good working condition Fedpfexg N Nlex Afisgh

Condition: like new (used), Year of construction: 2022, functionality: fully functional, The machine is a few years old, but has rarely been used. It can be inspected at our location in Weesp. Fgodoxg Hxwepfx Afijh

Condition: new, The KNUTH Basic 180 Super is a powerful and robust conventional horizontal lathe, designed for metalworking and known as the largest in its category. With an impressive bed width of 206 mm (8 in) and a total weight significantly heavier than similar models, it assures high machining quality ideal for demanding industrial applications. This metal lathe features a cast-iron bed with induction-hardened box ways, a headstock with D1-4′ mount, and a powerful main drive of 2.4 kW, making it perfect for various turning tasks. The Basic 180 Super comes with extensive standard equipment, including a 3-axis position indicator, quick-change tool holder, and a robust coolant system, ensuring efficiency and precision. You can tackle a wide range of projects while benefiting from the rugged construction that minimizes vibrations during operation. For those looking to invest in top-quality equipment, the Basic 180 Super is a standout choice in the category of conventional horizontal lathes and metal lathes. Request a quote now to enhance your workshop's capabilities with this dependable machine. Fodpfx Asuygz Tefiogh

Condition: like new (used), functionality: fully functional, Year of construction: 2021, overall weight: 155 kg, As-new system, has been used very rarely. Fodpow S Ht Hjfx Afiogh

Condition: good (used), Year of construction: 1994, control type: CNC control, controller manufacturer: Siemens, controller model: 840 D, pipe diameter (max.): 168 mm, bending angle (max.): 190 °, bending radius (min.): 80 mm, bending radius (max.): 700 mm, overall weight: 32,000 kg, total width: 2,700 mm, total height: 2,450 mm, Tube diameter: 168.3 x 11 mm Tube insertion length: 6000 mm Max. bending radius: 700 mm Control system: Siemens 840 D Min. bending radius: 80 mm Max. bending angle +/-: 190° Dimensions (L/W/H): 11.9 x 2.7 x 2.45 m Machine weight approx.: 33 t - CNC control: CNC MMI Multicontrol 2000 - Control system: NCU - PLC: Siemens Simatic S7 - Electrical connection: 400V / 50 Hz / 85 A Fjdpoxgqh Nsfx Afiogh The machine is fully automatic and equipped with a tool changer. The following tools are available: Tube Ø 48.3 mm; radius 105 mm Tube Ø 60.3 mm; radius 120 mm Tube Ø 63.5 mm; radius 150 mm Tube Ø 76.1 mm; radius 190 mm Tube Ø 88.9 mm; radius 222 mm Tube Ø 114.3 mm; radius 285 mm Tube Ø 139.7 mm; radius 350 mm Tube Ø 141.3 mm; radius 700 mm Tube Ø 168.3 mm; radius 420 mm There were a few mandrels with direct engravings indicating their specifications: 88.9 x 8 mm; 88.9 x 4.5 mm; 114.3 x 8.8 mm; 139.7 x 8.8 mm; 168.3 x 12.5 mm; 168.3 x 8.8 mm The following mandrel outer diameters were measured: 23.2 mm; 32.3 mm; 37.1 mm; 41.5 mm; 59.3 mm; 70.3 mm; 77.7 mm; 80.9 mm; 88.7 mm; 93.2 mm; 94.7 mm; 103.0 mm; 112.8 mm; 118.8 mm; 128.9 mm; 138.5 mm; 147.2 mm; 153.6 mm The accessory package has an estimated value of approx. €150,000.

Condition: new, Year of construction: 2025, Cap Labeler 1 Label Mobile, height-adjustable Fgedpfowl Aftsx Afioh

Condition: as good as new (ex-display), Year of construction: 2024, - of steel - filling weight 8 kg Fedpfxefpa Rpe Afiegh - with glue gun and pointed nozzle

Condition: good (used), Year of construction: 2002, machine/vehicle number: 0102002, Semi-automatic angle opening Very good condition 3 months functional guarantee Print format: 1000 mm x 1500 mm max. sheet size: 1050 mm x 1550 mm max. screen frame: 1370 mm x 1850 mm Squeegee pre-squeegee height adjustment: 40 mm Squeegee angle adjustment stepless: + / - 50 - 90 ° Support bar height adjustment: 0 - 100 mm stepless Maximum material thickness: 100 mm Fgodpfx Aorllhkofioh Machine weight: approx. 1500 kg connected load: 400Volt/50HZ - 5KW Air connection: 6 bar options: pneumatic screen frame clamping Squeegee pressure compensation adjustable via pressure regulator Stainless steel pressure plate Blowing air device All data without guarantee

Condition: new, The Turnado 230/1500 V, a leading model in the Conventional Horizontal Lathes category, represents the high standards of KNUTH’s Engine Lathes. Known for its robust construction, powerful motor, and versatile applications, this machine excels in precise machining tasks and is a proven bestseller. Its heavily ribbed machine bed, rigid headstock, and durable one-piece cast-iron stand ensure stability and longevity, while the extended, infinitely variable speed range allows for a superior surface quality during facing operations. Equipped with a high-quality quick-change toolholder system and a user-friendly control panel, the Turnado 230 V simplifies operation and reduces non-productive time. With standard features like a 3-jaw chuck, robust tailstock, and central lubrication, this lathe is designed for durability and performance. You can easily integrate it into your workshop and experience the advantages of the extensive standard equipment, including a coolant system and safety features. To explore this dependable lathe further, request a quote today and invest in the reliability of the Turnado series. Fgedpfsp At Trjx Afioh

Condition: new, Year of construction: 2024, MOBIL 2500 The mobile edge banding press. Ideal for constructing furniture! Technical Description MOBIL Typ 2500 (Typ 3000): > rigid, welded steel frame with fixed fences and spacer for massive, veneer and plastic edges > integrated electro heating rod made of resistant AL-alloy, lateral cut: 64 x 46 mm, controllable form 50 - 248°C , power 1200 (1459) Watt > 4 (6) clamping and pressing aggregates, each aggregate mounted on 7 ball bearings; each aggregate has its own clamping and pressing cylinder; adjustable width of the work piece 12 - 105 mm. Width of massive surface to be glued on the work piece is about 50 mm Fsdpfxoyuv Tj Afijgh > adjustable counter bearings for exact conformity of the edges > pressing cylinders and the counter bearings with vulcanised rubber plating's > fixed fences and spacer are covered by a special glue abrasive coating > the pneumatic pressing units are controllable separately, always pair wise; each pair: 1 shifter for: clamping of work pieces and 1 shifter for : pressing of work pieces > press is mobile on 4 guide rollers, 2 rollers with break > the press is equipped with a pneumatic maintenance unit, adapter 3/8 ´´, pressure controllable from 3-10 bar. Electric connection for the heating rods: 230 V, 50 Hz, 1200 (1450) Watt. working space w x h x d in mm: 2500 x 50 x 105 overall dimensions w x h x d in mm: 2700 x 1200 x 850 Additional options and accessories for MOBIL on request!!!

Condition: new, Year of construction: 2025, · Precise conveyor system for sheet transfer, continuously adjustable · Bands individually tensioned for exact straight running. · Sheet guide elements on the conveyor system, vacuum equipment Automatic Sheet positioning on the stack by side Straight pusher, activated by photo cell via inlet. . Central format adjustment. · Compressed air nozzles to support the sheet transition, clocked. Automatic Stack height sensing. · Control elements and resettable sheet counter on B side. Fgsdpfxofpa A Ee Afieh Automatic Sheet jam control with connection to machine Stop impulse. · Stepless format setting with clamps Sheet formats max. 750mm X 1050mm

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, TECHNICAL DATA - Demonstration machine from showroom Roll carriage length 3200 mm Cutting length 3400 mm Cutting height max. 155 mm at 90° / 105 mm at 46° Cutting width width stop 1030 mm Saw blade max. Ø 450 mm Saw blade can be lowered under table Ø 400 mm Table size cast table top 1200 x 655 mm Table extension plus 750 x 655 mm Table extension 1200 x 655 mm Table height +/- 20 mm 900 mm Main saw blade speed 3000 / 4000 / 5000 / 6000 rpm Net weight approx. 1051 kg TECHNICAL DESCRIPTION Solid German engineering For trimming, cutting to length, sizing, mitre cutting etc. Dimensionally stable and self-supporting machine body manufactured as a stable welded frame construction made of thick-walled steel profiles, laser-machined sheet steel parts and mechanically processed The torsion-resistant and finely planed cast table top is mounted on the machine body The robust and powerful saw unit installed in the machine frame guarantees precise saw cuts The complete saw shaft unit is dynamically balanced, double-guided swivel segments made of gray cast iron with double column guide for height adjustment and the long circular saw shaft with 2 ball bearings ensure absolutely smooth running The double roller carriage with ball bearings is smooth-running and maintenance-free. Precise and backlash-free running over the entire length, guided by hardened and and ground round steel guides with remote locking at 50 mm intervals Sturdy yet lightweight cross slide made of steel profiles with a support roller on the outer narrow side, cross slide widening Extendable up to 250 mm on the wide side Length stop on the cross slide with mm scale and telescopic extension, extendable up to 3500 mm; with 2 robust and backlash-free sliding stop flaps, 1 end stop with support for long strips; length stop can be used as an angle mitre stop on both sides, infinitely variable from 0° to 46° with mechanical length compensation; all common mitre angles (15°, 22.5°, 30°, 45°) are Fjdogz Hx Depfx Afiegh can be quickly set via a fixing system Width stop with cutting width 1030 mm to the right of the saw blade with fine adjustment, easy to adjust and fix manually, dimension display via easy-to-read mm measuring scale on adjustable ruler holder Table extension 1200 x 600 mm and table extension 750 x 655 mm Operation on the machine body with 4.3" touchscreen control for cutting height, swivel adjustment and speed Electromotive height and tilt adjustment via touch button Swivel range of the saw blade from 0° - 46 APA saw blade quick clamping system Main saw blade speed 3000 / 4000 / 5000 / 6000 rpm Safety guard can be swiveled to both sides, safety hood with interchangeable wide/narrow insert for saw blades up to Ø 450 mm Push-button control with electronic soft start (start/stop) Electronic, wear-free motor brake Saw blade Ø 400 mm can be lowered under the table Extraction nozzle Ø 120 mm on the machine body, Ø 80 mm on the protective hood Roller carriage, length and width stop profile anodized CE-compliant GS tested

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 150 h, input voltage: 400 V, total length: 3,000 mm, total width: 1,500 mm, total height: 2,200 mm, compressed air connection: 6 bar, type of input current: AC, overall weight: 1,500 kg, 1. very precise, fully automatic screen printing machine with an automatic feeder feeder that positions the sheet with an accuracy of 0.08mm. The integrated CCD camera recognizes a hole or a print mark and positions the screen with an accuracy of 0.02mm to the print mark. 2. welded steel frame and highly dynamic servo axes for maximum precision and smooth running 3. the printing table is made of cast aluminum with a flatness of ± 0.1 mm per meter Fjdpequ Udwofx Afisgh 4. all guides are hardened linerar guides for a long service life 5. an integrated, controlled pneumatic squeegee pressure compensation, which acts directly on the individual squeegee holders, is able to level out even the smallest unevenness in the printed material. 6. the material is kept in a floating state during application and removal, which guarantees scratch-free transportation.

Condition: new, Year of construction: 2024, functionality: fully functional, Technical description with the following main data: Load capacity 1000 kg static line load useful stroke 810 mm overall height 200 mm total height 1010 mm platform length 1300 mm platform width 800 mm Material smooth sheet metal Fgedpfx Asgqu A Tefijh Lifting time approx. 16 sec. for the full useful stroke Lowering time load dependent E-connection 3 x 400 V/ 50 Hz + protective grounding, w. 16 A CEE-plug and 4 meter cable motor 0,75 kW Painting blue-grey RAL 7031 Power unit placement integrated in the lifting table Control box dead man control incl. 2 m cable Total weight approx. 160 kg Standard version: The lifting tables comply with EN 1570 E and are marked with the CE sign. The steel parts are cleaned, primed with anti-rust paint and painted with two-component polyurethane paint. The lifting tables are equipped as standard with aluminum safety shut-off bars on all sides and with mounting supports for repair and service. Our lifting tables are dimensioned for approx. 5 strokes/hour with full load in 8 hours /day. For more intensive operation we offer special lifting tables. Warranty: 1 year on parts at normal operation in one shift, excl. labor costs.

Condition: as good as new (ex-display), Year of construction: 2024, different lengths on request - length 3000 mm with 3 supporting feet Fsdjgrn U Sjpfx Afijgh - roller conveyor with scale, manual measuring system with adjustable and hinged length stop incl. reading magnifier - Roller and measuring track for lighter plastic, aluminium and steel profiles - max. measuring length is track length minus 250 mm - carrying rollers, roller diameter 50x1,5mm, galvanized steel tube - axle diameter 8mm - track width 390 mm, usable roller width 300mm - Load capacity per metre of roller conveyor approx. 100 kg/m - roller pitch approx. 290 mm - track height adjustable from 770-1070 mm - all parts are painted, colour silver grey RAL 7042, feet anthracite grey RAL 7016

Condition: new, Year of construction: 2024, 4 PIECES AVAILABLE AT SHORT NOTICE with 15 supports (support surface: piping rubber) dimensions: LxWxH 910 mm x 700 mm x 1850 mm shelf depth: 510 mm Fgjdpogmht Sjfx Afijh shelf width: min. 500 mm - max. approx. 2000 mm Distance clear width from the shelves: approx. 78 mm Load capacity. max.ca. 600 kg evenly distributed load capacity/rake: approx. 40 kg Weight: approx. 90 kg