Used Briquett Bagging Maschine for sale (3,934)

Condition: used, Year of construction: 2012, functionality: fully functional, The plant comprises the following components:  Platform with a vibrated base for the bin support; this platform is protected by perimeter railings and is accessed via a ship-type ladder;  Empty bag magazine; the supply of empty bags is performed manually by the operator. The exact position of the bags is secured by adjustable side guides; a sensor located under the stack of bags signals when the pile is depleted;  On the structure of the empty bag magazine, pneumatic cylinders are installed for gripping the bag, opening its mouth, and inserting it onto the product dosing spout. The bags are handled by a series of suction cups. The pneumatic control panel QP1 is also mounted on the supporting structure of the magazine;  The dosing spout is supported by 3 load cells; at the outlet, a bucket-type gate valve driven by two pneumatic cylinders is installed. Next to it, two additional cylinders with hooks at the ends are used for tensioning the bag mouth.  The bag is clamped along its longer side by two jaws that hold it after filling and guide it to the sewing machine. Movement is achieved by geared motor units and wheels sliding on chrome-plated rods. At this stage, the bag rests on a motorized conveyor belt for transfer; this belt is also raised via a pneumatic cylinder so that the bag rests gently upon filling completion; the height of this belt can be adjusted manually using a handwheel acting on four jacks, to adapt the belt height to the bag type.  Once inserted into the sewing machine, the bag is stitched and the thread cut; still resting on the conveyor, the bag reaches the overturning station—there, it is held by two jaws, rotated 90°, and finally released so as to be parallel to the conveyor.  The next belt features, in its initial part, a series of square rollers for bag straightening, followed by a conveyor belt for forward movement;  Lastly, there is the roller conveyor where the bag is picked up by the robot; this conveyor is stopped by a photocell when the bag reaches the end of the roller line;  The robot gripper is of the comb type and is equipped with a translation cylinder to discharge the bag and two cylinders operating a plate to lock the bag during handling prior to discharge.  Two boxes containing the solenoid valves and vacuum units are installed on the plant; Kedpfx Agjxrcc Aj Ajdw  An electrical control panel manages the entire plant; the operator panel and weighing module are installed on it;  The robot is managed by its own control panel with a dedicated operator interface;

Condition: used, Year of construction: 2012, operating hours: 5,598 h, Bomag BW213PDH-4 roller from 2012 with only 5,598 operating hours! ----* Manufacturer: Bomag * Model: BW213PDH-4 * Year of manufacture: 2012 * Displayed operating hours: approx. 5,998 * Operating weight: 13,100 kg * A/C - Air conditioning * German machine * 119 kW * Deutz diesel engine * Additional photos and video available on request * Price: €46,900 net + 19% VAT ----For further questions, please call: Erik Kortum: WhatsApp Kai Kortum: WhatsApp Kedpfx Agjw Sk Sys Ajdw All information provided without guarantee or warranty, errors and prior sale excepted.

Condition: ready for operation (used), INA YRT F-229093 Radial bearing for Supfina machine, the item has been overhauled, used, good condition, 100% working, scope of delivery as per photos Kedpfx Ageulqh Hj Aodw

Year of construction: 2001, condition: ready for operation (used), Three grinding machines including several mobile extraction units are available. 1) Grinding machine Elektra Beckum TF 904/3.1WNB, year of manufacture: 2001, power: 3.1kW, speed: 8500rpm, grinding wheel diameter inner/outer: 30mm/200mm. 2) Mobile extraction unit Alko Mobil 200, year of manufacture: 2013, air volume flow: 2500m³/h, power: 2.2kW. An on-site inspection is possible. Kdedpfx Aexph Ryog Aow

Condition: used, Year of construction: 2022, operating hours: 2,000 h, functionality: fully functional, machine/vehicle number: ZD-QFP18, total width: 4,600 mm, total length: 16,000 mm, total height: 2,600 mm, cutting length (max.): 1,200 mm, type of input current: DC, overall weight: 24,000 kg, FANBANG- Jianshe twisted paper handle machine with Turn top J fold option. This machine is designed for producing square bottom paper bags with handles from sheet paper, either blank or printed. Combined with a handle-making unit, it performs handle production, handle application, bag mouth folding, side gluing, tube forming, bottom impressing, bottom gluing, bottom forming, and final product collection—all in a fully automatic process. It is an ideal piece of equipment for manufacturing food bags, shopping bags, and similar products, and can produce paper bags of various sizes. Within the suitable paper range, the production capacity can reach 60 pcs/min or higher, increasing unit productivity and profitability. Full enclosure design ensures operator safety. Kdsdjxn Skujpfx Ag Aow

Year of construction: 2021, condition: new, Derryglan Ltd - Bagging Systems offer exceptionally reliable, cost-effective bagging solutions. We offer a range of semi-automatic & automated bagging machines for many applications. We offer a full range of accessories to suit your requirements and application. Kjdpjgq N Axsfx Ag Aedw With body material available in painted mild steel or stainless steel. The T-1000 Advanced Poly-Bagger is our 'top-of-the-line bagger'. It is no wonder the T-1000 is also our best-selling machine! Designed for long or short runs, the T-1000 has the capability of cycling over 60 bags per minute, faster than any operator could manually feed. The T-1000 is also fast enough to keep up with automatic infeed equipment including vibratory bowl counters, scales and infeed conveyors. The T-1000 Advanced Poly-Bagger is also designed to run inline with punch/stamp presses, injection mould machines, blister machines and other continuous feed manufacturing equipment for inline bagging.

Year of construction: 2003, condition: excellent (used), machine/vehicle number: 5479, REF: MM6231 Weighing and bagging system which has previously been used to pack 1.8kg and 2kg bags of grated cheese, comprising of: 1 x Bilwinco A/S 14-head weigher fitted with dimple pans and PLC control panel. Technical specification ⚙️ ✅ Model - BW114-W. Kodoxnivujpfx Ag Ajdw ✅ Serial number - 5479. ✅ Date of manufacture - 2003. ✅ Weighing range - 10g to 1000g, per drop. ✅ Electrical requirements - 400 V / 50 hz / 3 phase. ✅ Power - 10 Amps. ✅ Compressed air - 8-10 bar. 1 x Stainless-steel purpose-built gantry structure. Overall dimensions - 1750mm long/deep x 2320mm wide x 3500mm high. 1 x Sandiacre Packaging Machinery Limited vertical form, fill and seal bagging machine with Allen-Bradley touch-screen control panel and supplied with 2 x forming tubes. This machine has vacuum and gas-flush sealing functions. Technical specification ⚙️ ✅ Model - TG400LDK. ✅ Serial number - 2607. ✅ Date of manufacture - 2000. ✅ Sealing jaws - Vertical: 540mm & Horizontal: 420mm. ✅ Maximum bag width - 400mm. Previously running a 592mm wide film. ✅ Forming tubes - 180mm diameter to form bag 240mm wide. ✅ Footprint of system - 2500mm long/deep x 2320mm wide x 3600mm high. NOTE: This system has recently been serviced, with new chains, belts and other consumables fitted at a cost of approximately £6,000.

Condition: ready for operation (used), Year of construction: 2008, The machines can make stand up pouches with zip lock from foil. It was in operation till August. Stand-up pouch sizes :min 100x40x150h | max 300x200x400h mm, speed: 40-60 bags per minute. Kodpfx Aeu Uvqqjg Asdw The complete bagging line is also for sale, it includes Ishida 14 weigher in nclosure, Wiese bucket elevator, Phantom metal detector, Prisma check weigher, feeding hopper for powders, Impulse vibratory feeder, all are from 2008.

Condition: excellent (used), Mixing component station consisting of: - Chronos single-spout bagging system -> approx. 60 bags/h at 25 kg each (filling weight adjustable) - M-Tec 450 liter mixer with 2 agitators - 7-component station for additives - Conveyor belt - Scale + printer Kdodpoxhhcyofx Ag Aew - Control system

Year of construction: 2011, condition: ready for operation (used), functionality: fully functional, Complete tea bagging and packaging equipment. Kjdjxdmcwopfx Ag Aodw The option of sealing the filters without glue or metal staples makes it perfectly suitable for packaging herbal teas. The complete system consists of 3 machines, with the main components replaced in 2023. The equipment was manufactured in 2011 and has been out of operation for about a year. It can be inspected in operation, in its industrial environment, in Budapest. Please see the attached document for further information and data.

Condition: like new (used), Year of construction: 2019, operating hours: 1,450 h, functionality: fully functional, Dry Ice Dosing & Bagging System. Automated Production & Bagging System. Automatic Dosing & Packaging System for Dry Ice Pellets. New price currently around € 250,000 Description: Complete system for dosing and packaging dry ice pellets. Fully automated process with high capacity and reliability. Specifications: * Dosing capacity: up to 10 drops/min of 800 g (tolerance ±5%) * Packaging capacity: up to 25 bags/min (depending on bag size) Kodsw Ttxfspfx Ag Asdw * Maximum bag width: 230 mm, maximum film width: 600 mm * Works with 40-micron BOPP film (optional with perforation and print) * Includes: vibration dosing system, conveyors, bagging machine, accumulation table Advantages: * Fully automated dosing, filling, and packaging * Stable and reliable operation, approved in validation tests * Eco-friendly and efficient solution for dry ice production * Usable for up to 1,600 operating hours per year

Condition: ready for operation (used), Year of construction: 1986, functionality: fully functional, Speed: 100 bags/min Tube length: 270-630 mm Bag length: 220-560 mm Bag width: 110-250 mm Kdjdpfx Agjxcy H Ho Aew Bottom width: 60-160 mm Number of ply: 2 Photocell for preprinted reels Printing section: 2 colors inline (new anilox and rubber rollers) Bottom patch unit

Condition: refurbished (used), Hydraulic Pump Sperry Vickers Type: GPA2-10-E-30-R-GE 334with attachment clutch gear motor Leroy - Somervon Kupplungstechnik Kodpod Szm Tsfx Ag Asdw

Condition: new, Year of construction: 2025, Semiautomatic multi-product filling station equipped with precision balance. The operator positions the empty bag under the bag-holder and the bagging machine fills it quickly and with maximum precision thanks to the automatic weighing system. The product is extracted from the hopper via a conveyor belt driven by a gear reducer. Wide mouth hopper for easy filling with mechanical shovel or other system. Side and rear couplings for forklift forks to facilitate transport.       Specification bagging machine with hopper ARK01: - Bagging capacity 3-4 tons / hour - Hopper capacity 2 m³ (heaped) - Overall dimensions L 210cm x L 260cm x H 225cm - Total weight is about 400 Kg - Precision weighing +/- 100 grams Kedjd Nqvnjpfx Ag Ajdw - Possibility to prepare bags from 1 to 50 kg * -Wiring for power line connection - Manual tilting gate to regulate the quantity in outflow - Vertical tilting scale support to adjust the height based on the bags used - Command hospital - 400V three-phase power supply - Instruction manual - Made in EU

Condition: good (used), Manufacturer: Haver & Boecker Documentation available Mechanical conversion from 50 kg to 25 kg bags in 1999 Kdedpfjv Sz Tdox Ag Aew Control system: Siemens S7 Upgraded to the latest standard with spare parts support in 2015 Supported bag types: Quicklime, hydrated lime, cement, gypsum

Condition: new, Year of construction: 2025, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 800 mm, 🚀 EMO Show Highlight: VM2000 Gantry Milling Machine 🚀 – Precision. Performance. Immediately Available. Our CNC gantry milling machine VM2000 will be demonstrated live at the upcoming EMO trade fair – giving you the unique opportunity to secure this model directly from the show at a special price! 🔧 Technical Highlights: ✅ Travel range: X 2000 mm / Y 1300 mm / Z 800 mm ✅ Spindle: HSK A63, 15,000 rpm, 38 kW peak power ✅ Table size: 1650 × 1300 mm, load capacity up to 4000 kg ✅ Precision: Positioning accuracy P0.012 mm ✅ 24-position tool changer for maximum flexibility 💡 Perfect for tool & mold making, automotive, and aerospace industries. Further specifications attached and below: Category Value Control FANUC 0i MF Plus X-axis travel 2000 mm Y-axis travel 1300 mm Z-axis travel 800 mm Spindle nose to table 235–1035 mm Column distance / max. workpiece height 1820 / 1000 mm Table size (L×W) 1650 × 1300 mm Max. table load 4000 kg T-slots (width × pitch × qty.) 22 × 180 × 7 mm Spindle taper HSK A63 Max. spindle speed 15000 rpm Spindle power (cont./max.) 15 / 38 kW Max. spindle torque (cont./max.) 70 / 149 Nm Rapid traverse X/Y/Z 20000 / 20000 / 12000 mm/min Feed rate X/Y/Z 1–10000 mm/min Motor power X/Y/Z 4 / 9 / 9 kW Tool changer type Arm Tool positions 24 Max. tool diameter φ75 / φ130 mm Max. tool length 300 mm Max. tool weight 8 kg Positioning accuracy P0.012 mm Repeatability Ps0.010 mm Air pressure 0.6–0.8 MPa Coolant flow 99 L/min Power supply 3/PE, AC380V, 50Hz Power consumption 60 kVA Machine dimensions (L×W×H) 5000 × 4910 × 4600 mm Machine weight 21000 kg Main Features 1 FANUC 0i-MF plus absolute, type 0 system, 15-inch color LCD 2 iHMI + manual I 3 Max.1500, min.400 block look-ahead 4 Data server (2GB) 5 Fast Ethernet card 6 Straightness compensation interpolation 7 Custom operator panel 8 Rigid tapping 9 Transformer 10 Work area lighting Kodpfx Agow N I A Do Aodw 11 3-color signal beacon 12 Portable MPG 13 Automatic power-off 14 Safety door interlock 15 Foot switch and tool release button 16 Coolant tank level monitoring 17 Direct-drive spindle HSK A63, 15000 rpm 18 Spindle oil chiller 19 Air blow for machining 20 Coolant system 21 Spindle air seal 22 Air gun / water gun 23 Grease lubrication system 24 Pneumatic system 25 Full enclosure 26 Electrical cabinet air conditioner 27 Swiveling control cabinet 28 Separated cabinet for high & low voltage 29 Hinged chip conveyor 30 Adjustable leveling pads & foundation blocks 31 Tool kit 32 Operating manuals 33 Spiral chip conveyor 34 Operation manual 35 Spiral chip conveyor 36 CTS, 20-70 bar, including through-spindle air 37 Oil separator (Chinese brand) 38 Arm-type ATC, 24 tools 39 FAGOR absolute linear scales on X, Y, and Z axes 40 Encapsulated iron package 👉 Get more info & secure the special price: New CNC Gantry Milling Machine Skymaster VM2000 – Kraft Werkzeugmaschinen

Condition: new, Year of construction: 2024, CNC 1212INDUSTRY 2.0 6kW 1200x1200 milling machine with Becker KVT 3.140 vacuum pump The INDUSTRY 2.0 series differs from the standard series by using the best and most precise engines in its class and drive transmission, which significantly increase the machining capabilities of the machine, making it the most industrialized series in this price range. Kdedpfx Aotu H Tueg Asw The INDUSTRY 2.0 series CNC milling plotter with a working surface of 1200 x 1200 mm and a clearance in the Z axis of 300mm is equipped with a 6kW electrospindle and 24,000 rpm on ceramic bearings. The machine's work table is made in hybrid technology - it has vacuum sections and subsections enabling automatic, non-invasive clamping of the processed material as well as T-slots enabling manual clamping. Technical data: Manufacturer: TechnologieCNC Model: 1212 INDUSTRY 2.0 Electric spindle: 6kW, 24000rpm on full ceramic bearings Max. working speed in free runs: up to 33m/min Max. working speed in the material: up to 25m/min Program resolution: 0.01mm Mechanical resolution: 0.04mm Working surface X/Y/Z: 1200x1200x300mm - Hybrid table (vacuum + T-slot) Control: NK-105 G2 controller Achieving high working speeds and machining stability is guaranteed by the Leadshine EASY-SERVO servo drives used in the machine with an encoder and drive transmission via a SHIMPO planetary reducer Software: CAD/CAM as standard: Artcam Open 2016 Power supply: 3PH, 400V, 50-60Hz Weight: approx. 650kg Dimensions: For transport - 220 / 190 / 220 Machine assembled and ready to work - 220 / 225 / 230 Standard equipment Hybrid table, i.e. vacuum table enabling non-invasive fixing of the element, leaving the possibility of manual fixing of irregular shapes The machine frame is fully welded, stress-relieved and then milled, which ensures machining accuracy and stability of work Machine control using the DSP NK-105 controller Tool height sensor included Central oil lubrication system for trolleys and guides as standard equipment Drive transmission is carried out via a reducer The machine moves on high-class guides and PMI 25mm linear bearings in all axes (X, Y, Z) Double LEADSHINE Easyservo servo drive on the Y axis Machine wiring made of high-class fire protection cables. The electric cables used to build the milling machine are adapted to bending and are protected against deformation

Condition: excellent (used), Year of construction: 2008, MESPACK type H-180-FE powdered sugar bagging machine Year 2008 Filling in 2 stages 1 filler fills half, 2 filler fills other half Capacity: 50 bags per minute. Cartoning machine OTOR SYSTEMS type FCR 214 Capacity: 5 cartons of 10 bags per minute Year 2011 Kjdpfx Agotn Raro Asdw

Condition: ready for operation (used), Filling material: powder/granulates, bag types: valve bag, filling weight range: 25kg-50kg, max. bagging capacity: 300 bags/h. The machine was used for packing sand. An on-site inspection is possible. Kdodpfx Agjwn H Uqe Aow

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, Filling station for Big Bags or drums, consisting of: - Feed hopper - Vibratory feeder tray with magnetic drive 550/400x2500 mm, trough height 200 mm, mounted on rubber buffers, with support structure - Frequency control unit, installed in control cabinet with PLC for connection to scale - Dosing floor scale, 1200x1200 mm, 1 kg - 3000 kg, evaluation electronics with tare function New price €39,850 (net), invoice available as proof Kdedpsw Rq Dyjfx Ag Aow

Condition: excellent (used), Year of construction: 2020, Manufacturer: Greif Velox Year of manufacture: 2020 Type: BVP Particle sizes: 30 μ - 5 mm Bag size: 9.5 - 30 kg Bag capacity: up to 250/h Containers: Valve bags made of paper, PE, PP fabric Kdsdpfx Agswcfwye Asw Fully automatic single-spout system with bag feeder, 500-liter pre-bin, dust extraction without collection container, control panel 1x conveyor belt 650 x 2,000 mm

Condition: used, Gainsborough bagger and All-Fill powder depositor. Kdodpevvpphofx Ag Aew

Condition: ready for operation (used), Mazak tool changer for Mazak machine H 400 ,used, normal traces of use, 100% functional, scope of delivery according to photos Kdsdpfx Agoi Eb Dro Aew

Condition: ready for operation (used), Year of construction: 1988, An older Wagner bagging system for non-lumpy bulk materials including an automatic scale is available. An on-site inspection is possible. Kjdpewn H Uksfx Ag Ajdw

Condition: excellent (used), Ishida multihued weigher with elevated conveyor, gantry and PFM bagging machine. Removed from a high care cooked meat plant in the last few weeks. Lovely condition. Kedpfx Ajlkc U Esg Ajdw