Used Brewing Machine for sale (91,845)

Condition: ready for operation (used), Year of construction: 1984, functionality: fully functional, turning length: 600 mm, turning diameter: 400 mm, spindle bore: 73 mm, controller model: ELTRO MPULS, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Turning diameter: 400 mm Turning length: 600 mm Swing diameter: 600 mm Spindle bore: 73 mm MACHINE DETAILS Prodpfx Aexn I Sbsgwjc Control model: ELTRO MPULS

Condition: refurbished (used), Year of construction: 2000, functionality: fully functional, drilling depth: 600 mm, rotational speed (max.): 6,000 rpm, center height: 250 mm, controller model: SIEMENS Sinumerik 840 D, workpiece diameter (max.): 25 mm, No reserve price – guaranteed sale to the highest bidder! The machine has been completely overhauled! TECHNICAL DETAILS Working depth: 600 mm Working diameter: 4 – 25 mm Number of spindles: 2 Centre height: 250 mm Centre distance: 203.2 mm Speed range: 1,000 – 6,000 rpm Feed rate: 0 – 300 mm/min Rapid traverse: 6,000 mm/min MACHINE DETAILS Control system: SIEMENS Sinumerik 840 D (Retrofit) Drilling system: Single-lip deep hole drilling Prsdpfxexpvbto Agwec Main drive: 2 x 5.5 kW EQUIPMENT - Single functions for machine setup - Semi-automatic operation for manual loading - Robust spindle carriage - Machine monitoring with spindle speed display - Table plate in special cast design - Safety guard with sliding door - Machine bed with hardened and ground linear guides - Internal coolant supply through drilling spindle - Electrical equipment according to IEC standards - Separate control cabinet with safety devices - Control panel in working area

Condition: ready for operation (used), Year of construction: 1990, functionality: fully functional, travel distance X-axis: 1,390 mm, travel distance Y-axis: 710 mm, travel distance Z-axis: 540 mm, table load: 1,500 kg, controller model: Heidenhain TNC 355, TECHNICAL DETAILS Travel X: 1,390 mm Travel Y: 710 mm Travel Z: 540 mm Table width: 560 mm Table length: 1,800 mm Table load capacity: 1,500 kg Tool holder: SK50 Speed range: 45 - 2,240 rpm Vertical speed: up to 2,800 rpm Feed range: 3 - 2,000 mm/min MACHINE DETAILS Control: Heidenhain TNC 355 Main drive: 18.5 kW Transport dimensions & weight Transport dimensions (L x W x H): 2.7 x 3.0 x 2.9 m Transport width with X-axis drive removed: 2.45 m Machine weight: approx. 5.5 t EQUIPMENT Rapid traverse on all 3 axes Swivelling milling head +/- 45°, including quill stroke 90 mm Swivelling bracket for vertical milling head Swivelling counterholder for horizontal milling arbors Electromechanical tool clamping Prjdexn S Sfjpfx Agwoc Manuals

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 675002, travel distance X-axis: 650 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 500 mm, overall weight: 13,000 kg, swivel angle C-axis (max.): 360 °, TECHNICAL DETAILS X-axis travel: 650 mm Y-axis travel: 1,100 mm Z-axis travel: 500 mm C-axis rotation: 360° Tool magazine: 32 pcs. MACHINE DETAILS Number of axes: 3 Dimensions & Weight Dimensions (L x W x H): 3,500 x 1,800 x 2,800 mm Weight: 13,000 kg EQUIPMENT Chip conveyor Probe Documentation Pedpoxrb Abefx Agworc CE marking

Condition: excellent (used), functionality: fully functional, Year of construction: 2011, operating hours: 3,149 h, controller model: Sinumerik 840 D sl, laser power: 3,200 W, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 115 mm, No reserve price – guaranteed sale to the highest bidder! The machine has been regularly serviced by Trumpf (most recently in May 2024). The machine has only 3,149 beam hours! TECHNICAL DETAILS X-axis travel: 3,000 mm Y-axis travel: 1,500 mm Z-axis travel: 115 mm Positioning Accuracy Average positional variation on sheet metal: ±0.03 mm/m Positioning deviation Pa on sheet metal: ±0.1 mm/m Smallest programmable increment: 0.001 mm MACHINE DETAILS Control: Sinumerik 840 D sl Laser power: 3,200 W Footprint & Weight Footprint (L x W): 6,500 x 7,600 mm Weight: 12,000 kg Operating Hours Laser on-time: 13,378 h Laser beam-on hours: 3,149 h EQUIPMENT Two cutting heads Various spare parts Extraction system Manually extendable loading and unloading table Prodpfx Asxrk Imegwoc Note: 2x TruTops software licenses can be purchased separately.

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 425004330, working width: 500 mm, type of input current: three-phase, overall weight: 1,300 kg, total height: 1,600 mm, total length: 3,300 mm, total width: 2,300 mm, Fully automatic binding line with a capacity of up to 2,100 cycles per hour! TECHNICAL DETAILS Mechanical cycles per hour: 2,100 Pitch: 3:1, 2:1 Binding thickness: 15 mm Binding element: 5.5 - 19 mm Min. binding width: 70 mm Max. binding width: 500 mm Min. unbound edge: 135 mm Max. unbound edge: 700 mm Binding process: Automatic Psdpfxjxrb Uqe Agwjrc Time required for diameter change: 20 min Format change without diameter change: 3 min MACHINE DETAILS Dimensions & Weight Machine dimensions (L x W x H): 3,300 x 2,300 x 1,600 mm Machine weight: 1,300 kg Power requirements: 3/N/PE~400/230V 50Hz / 3.5 kW 3/PE~200/115V 60Hz / 3.5 kW EQUIPMENT Touchscreen-assisted setup process Simple and fast automatic machine setup via display Easy product loading Closure tools (5/16, 9/16, 5/8, 7/16, 3/8 inch) Calendar hangers

Condition: ready for operation (used), Year of construction: 2019, operating hours: 11,337 h, functionality: fully functional, machine/vehicle number: 234917, clamping force: 1,600 kN, screw diameter: 30 mm, Equipment: documentation/manual, The machine comes from a cleanroom production environment and has been operated exclusively with PP material. As a result, the screw is in very good and well-maintained condition. TECHNICAL DETAILS Clamping force: 1,600 kN Screw diameter: 30 mm MACHINE DETAILS Weight: 8,400 kg Operating hours: 11,337 h EQUIPMENT Documentation/Manual Comprehensive special equipment Podpfx Aoxqgrrsgwsrc

Condition: like new (used), Year of construction: 2005, operating hours: 4,000 h, functionality: fully functional, machine/vehicle number: will advise enquirer, pressure: 200 bar, this machine has very little use and is as new condition Psdjwgkhrjpfx Agwerc

Condition: like new (used), Year of construction: 2012, input voltage: 400 V, 2 X Zentner Washer 250 - Screen Cleaning Units Pedpfx Agev Dpy Nswsrc Unit 1 Unused and New Condition $20,000.00 USD Unit 2 Used - Excellent Condition $16,000.00 USD

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 17.05.7411, working width: 1,300 mm, pass-through height: 150 mm, empty load weight: 4,105 kg, controller manufacturer: SYEL, number of rollers: 7, TECHNICAL DETAILS Max. working width: 1,300 mm Max. pass-through height: 150 mm Number of brushes: 3 top Number of rollers: 7 MACHINE DETAILS Control: SYEL Dimensions & Weight Dimensions (L x W x H): 2,800 x 2,500 x 2,500 mm Dead weight: 4,105 kg Electrical Data Total connected load: 51 kW Voltage: 400 V Current consumption: 103 A Power: 51.0 kW Pjdpfx Agjxq Arnowjrc EQUIPMENT Infinitely variable power supply CE marking

Condition: new, functionality: fully functional, Year of construction: 2024, machine/vehicle number: 50, laser power: 12,000 W, sheet thickness steel (max.): 100 mm, total length: 125,000 mm, warranty duration: 60 months, GX(Pro) Double Exchange Platform Sheet Fiber Laser Cutting Machine. Working platform size: 3048mm*1524mm, 4064mm*2040mm, 6096mm*2540mm, 12500mm*2540mm; Laser source power: 3000 - 40000W Optional function: automatic loading and unloading system Pjdpfx Agsruz Uxjworc

Condition: refurbished (used), functionality: limited functionality, Year of construction: 2003, operating hours: 24,000 h, pipe diameter (max.): 100 mm, pipe length (max.): 4,100 mm, bending angle (max.): 183 °, bending radius (max.): 300 mm, wall thickness: 8 mm, Transfluid DB 2090 DB CNC Mandrel Tube Bending Machine. Excellent High Quality Germany Machine, with fully refurbished main hydraulic pumps and main head fully reconditioned. Only requires new encoder to be fitted and this machine is ready to go. Features include. 100mm x 1.6mm Tube Maximum Capacity at 1.5D Anticipated Mandrel Withdrawal Fully automatic setup of clamps and follower Boosted Follower for tight radius thin wall tube bending. Long bed with 4000mm over mandrel. Comes with huge amount of tooling worth over AU$150k. Tooling Included: 101.6mm 152mm CLR 101.6mm 200mm CLR 76.2mm 114mm CLR 76.2mm 200mm CLR 76.2mm 238mm CLR 63.5mm 96mm CLR 57.2mm 86mm CLR 50.8mm 76mm CLR 44.5mm 67mm CLR 40 x 40 120mm CLR 50 x 50 150mm CLR Podpfx Aotrd T Tjgwjrc 60.3mm 150mm CLR 48.3mm 120mm CLR

Year of construction: 2018, condition: ready for operation (used), Control Unit Brand HAAS Main Drive Spindle speed range 2400 rpm Spindle motor power 40 hp Number of axis 2 Tail Stock Pinol tool taper MT5 Media Chip conveyor Yes Additional Equipment Line Filter & Surge Suppressor – 220 VAC, 3-phase, 80 A, 60 Hz Early Power-Failure Detection Module Belt-Type Chip Conveyor Pedpfjxp Sl Uex Agwerc This HAAS ST-40 was manufactured in 2018. It features a 15-inch chuck, a maximum part swing of 35.5 inches, and a cutting diameter of 30 inches. The machine includes a 2-speed gearbox spindle, capable of 2,400 rpm, and a 12-station BOT turret. Additional equipment includes a belt-type chip conveyor and a programmable servo tailstock. Consider the opportunity to buy this HAAS ST-40 horizontal turning machine. Contact us for more information about this machine. Application Types Turning

Condition: used, Year of construction: 2002, Technical details: Prsdpfxoxr Dzmj Agwoc max. wheel diameter: 150 mm gear width: * mm max. module: 3,5 min. module: 1,25 total power requirement: * kW weight of the machine ca.: 6,5 t dimensions of the machine ca.: 2,35 x 2,10 x 2,35 m Width of teeth: 45 mm boring diameter: 100 mm surface area: 1300 x 300 mm

Condition: used, Motor 6 / 7.5 kW Location: Supplier Prsdpfx Agsw Enw Iswoc

Condition: ready for operation (used), Year of construction: 2015, This KOIKE PNC-12 EXTREME plasma cutting machine was manufactured in 2015. It features a robust CNC control system and an effective cutting area of 1500 x 3000 mm. Capable of handling a maximum cutting thickness of 50 mm and equipped with rapid travel speeds up to 4000 mm/min, it ensures efficient operation. Consider the opportunity to buy this KOIKE PNC-12 EXTREME plasma cutting machine. Contact us for more information about this machine. Prodjxr Rwzjpfx Agwec Application Types Cutting

Condition: used, Year of construction: 2005, Processing size: 3000 x 1600 x 180 mm High-pressure pump 60 HP / 45 kW Model E-60 Operating pressure 4,130 BAR Water consumption 4.69 liters/min. Software: Watercad-CAM Automatic cutting optimization Storage location: customer Prsdpfxoxgfbqj Agwec

Year of construction: 2019, condition: ready for operation (used), General Data Measurements width 1600 mm Measurements depth 2700 mm Measurements height 2858 mm Machine weight 4400 kg Main Drive Number of axis 4 Movement X-Axis Movement 600 mm X-Axis Accuracy 0.001 mm Prodpfxsxr Ry Ao Agwjc Y-Axis Movement 400 mm Y-Axis Accuracy 0.001 mm Z-Axis Movement 400 mm Z-Axis Accuracy 0.001 mm Workpiece Workpiece weight 1000 kg Additional Equipment Linear tool changer (LTC): 6 positions This 4-axis AgieCharmilles Form E 600 die-sinking EDM machine was manufactured in 2019. It offers precision and efficiency for complex mold manufacturing. Consider the opportunity to buy this AgieCharmilles Form E 600 die-sinking EDM machine. Contact us for more information. Application Types EDM

Year of construction: 2015, operating hours: 8,712 h, condition: ready for operation (used), Control Unit Brand HAAS Main Drive Number of spindles 1 Spindle speed range 6000 rpm Spindle motor power 11.2 kW Spindle bore 44 mm Tool taper A2-5 Number of axis 2 Prjdsxr Ry Njpfx Agwsc Movement X-Axis Movement 200 mm Z-Axis Movement 406 mm This HAAS ST-10 was manufactured in 2015. A robust horizontal turning machine, it offers reliable performance for precision machining. Ideal for those seeking efficient turning operations. Contact us for more information. Application Types Turning

Year of construction: 2004, condition: ready for operation (used), General Data Measurements width 1643 mm Measurements depth 2432 mm Measurements height 1900 mm Machine weight 3200 kg Control Unit Brand FANUC Main Drive Number of spindles 1 Spindle speed range 6000 rpm Spindle motor power 11 kW Spindle bore 36 mm Number of axis 2 Movement X-Axis Movement 180 mm Z-Axis Movement 520 mm Workpiece Workpiece weight 85 kg Turret Number of turrets 1 Tools Number of index 10 This Goodway GLS-150 M was manufactured in 2004. A reliable horizontal turning machine, it's ideal for precision tasks. If you are looking to get high quality turning capabilities consider the Goodway GLS-150 M machine we have for sale. Contact us for more information. Application Types Pjdpfx Aoxr Rzgsgworc Turning

Year of construction: 2018, condition: ready for operation (used), Main Drive Spindle speed range 45-6000 rpm Spindle bore Ø62 mm Number of axis 3 Movement X-Axis Movement 260 mm Y-Axis Movement 100 mm (+/-50) Z-Axis Movement 350 mm Tools Number of station 12 Podpfsxr Rzmex Agworc Type of tool holder VDI design Media Chip conveyor Yes Additional Equipment SR1453 hydraulic cylinder for chuck operation 1 set V12 VDI design revolver head 1 set Mayfran chip removal preparation 1 set Machining Navi L-g – cutting aid for dampening vibrations during cutting 1 set API library 2 – for Industry 4.0 solution 1 set OKUMA Virus Protection System (OSP-VPS) - Virus protection 1 set 6” chuck This 3-axis OKUMA LB2000 EXII MYC lathe was manufactured in 2018. It features a max machinable diameter of 360mm and a workpiece length of 250mm. The machine offers internal cooling through the spindle, a V12 VDI design revolver head, and a 6” chuck. Equipped with the OSP-P300L CNC Controller and advanced features like the Machining Navi L-g for vibration dampening and OKUMA Virus Protection System. Consider buying the OKUMA LB2000 EXII MYC machine we have for sale. Contact us for further details. Application Types Turning

Condition: ready for operation (used), Year of construction: 2014, operating hours: 51,488 h, This Citizen CINCOM A32-VII CL swiss type turning machine was manufactured in 2014. It features a main spindle with a 32 mm capacity, a counter spindle, and a maximum turning length of 3000 mm. Equipped with a high-speed CHIDOMI system, it supports simultaneous movements across all axes and offers a feed rate up to 9,000 mm/min. Consider the opportunity to buy this Citizen CINCOM A32-VII CL swiss type turning machine. Contact us for more information about this machine. Application Types Turning Podpfx Aoxr Rx Eegworc

Year of construction: 2006, operating hours: 65,945 h, condition: ready for operation (used), General Data Machine weight 2500 kg Control Unit Brand FANUC Main Drive Spindle speed range 4500 rpm Spindle motor power 7.5 kW This Takamaz X-100 was manufactured in 2006. A robust horizontal turning machine featuring a max turning diameter of 203 mm, spindle speed up to 4500 rpm, and a chuck diameter of 153 mm. Weighing 2500 kg, it underwent a spindle and ball screws overhaul in 2021. If you are looking to get high quality turning capabilities consider the Takamaz X-100 machine we have for sale. Contact us for more information. Application Types Podpfxoxr Ryce Agwjrc Turning

Year of construction: 2004, operating hours: 25,218 h, condition: ready for operation (used), Control Unit Brand HEIDENHAIN Model CNC Pilot 4290 Main Drive Number of axis 3 Prjdpfx Aoxr R A Djgwoc Additional Equipment Chip conveyor included Forkardt lathe chuck Ø400 with several sets of jaws (approx. 100 sets) This 3-axis Gildemeister CTX 520 linear was manufactured in 2004. It's a horizontal turning machine designed for precision and efficiency in metalworking. If you are looking to get high-quality turning capabilities, consider the Gildemeister CTX 520 linear machine we have for sale. Contact us for more information. Application Types Turning

Year of construction: 2003, operating hours: 4,894 h, condition: ready for operation (used), General Data Measurements width 2500 mm Measurements depth 4000 mm Measurements height 2500 mm Machine weight 6000 kg Control Unit Brand SIEMENS Model Sumerik 810 D Main Drive Spindle bore 65 mm Number of axis 3 Movement X-Axis Movement 210 mm X-Axis Feed Force 5000–7000 Nm X-Axis Rapid Traverse 24 m/min Y-Axis Movement ± 40 mm Z-Axis Movement 610 mm Z-Axis Feed Force 5000–7000 Nm Z-Axis Rapid Traverse 24 m/min Prodsxr Rw Iepfx Agwoc Turret Number of turrets 1 Rotating tools Yes Tool taper VDI 30 Tools Number of station 12 Additional Equipment Oil cooler Parts catcher This 3-axis EMCO turn 365 tcmy was manufactured in 2003, featuring a 12-station tool turret, VDI 30 tool holder, and driven tools with a speed range up to 4,000 rpm. It includes a power chuck, live centre, collet chuck device, and additional tool holders. Ideal for precision turning, this machine offers robust capabilities with a spindle size of 65 mm and a travel distance on the Z-axis of 610 mm. Contact us for more information about this machine. Application Types Turning