Used Brazing Furnace for sale (742)

Year of construction: 2005, condition: ready for operation (used), Usable space: approx. 4m³, max. temperature: 400°C. The furnace is located in the outdoor storage area. Documentation available. An on site inspection is possible. Bedpfoygw S Asx Ahvecw

Year of construction: 2018, condition: ready for operation (used), A Thermconcept high-temperature tube furnace is available. T. max.: 1700°C, heated length: 200mm, tube diameter/length: 60mm/600mm, power: 3.3kW, dimensions X/Y/Z: 460mm/530mm/830mm. Documentation available. Bcjdpfxotxb Avj Ahvow

Year of construction: 2018, condition: ready for operation (used), A slightly used Uterna furnace is available. Internal dimensions X/Y/Z: 1500mm/1500mm/1000mm, power: 38kW, max. temperature: 500°C. Machine dimensions: approx. 2150mm/2650mm/2200mm. Documentation available. An on-site inspection is possible. Bcedpext Rmlefx Ahvjw

Year of construction: 2023, condition: ready for operation (used), A foldable tube furnace from Thermconcept is available. Maximum temperature: 1100°C, heated length: 500mm, constant zone: 160mm, recommended tube diameter/length: 70mm/750mm, power: 3kW, dimensions X/Y/Z: 650mm/500mm/510mm. Documentation available. Bodjtxb Apspfx Ahvecw

Year of construction: 2015, condition: ready for operation (used), There are 2 vacuum retort furnaces available, 1x vertical & 1x horizontal. Vertical: Xerion XRetort, year of construction: 2015, U: 400V, P: 48kW, Tmax: 700°C. Horizontal: Year of construction: 2008, U: 400V, P: 18kW, Tmax. 700°C. On-site inspection is possible. Bjdpfx Aotndwuehvjcw

Year of construction: 2008, condition: ready for operation (used), A heat treatment facility (2-chamber bogie hearth furnace) consisting of two furnaces is available. 1) Chamber furnace Bättenhausen Wärmetechnik GmbH, year of construction: 1991. 2) Chamber furnace LIO Poland, year of construction: 2008. Chamber dimensions X/Y/Z: 2x900mm/4300mm/1100mm, fuel: natural gas, temperature range: 350°C-1100°C, burners: 2x18, max. product dimensions X/Y/Z: 8800mm/3100mm/250mm, max. product weight: 18t. Process: Normalizing, tempering, soft annealing, austenitizing, hardening. Including a chimney, height: 38m. The plant is partly scrapped. Documentation available. On-site inspection is possible. Bcedpfx Ahswmdvvsvsw

Year of construction: 1995, condition: ready for operation (used), Product: Electrosinter Year of production: 1995 Bcedpfjg R Sh Aox Ahvew Air transport: 2x9000m3 Airspace / Capacity: 32m3 Oven opening: 1200 x 1200mm // 80 x 1500mm Heat load: 55-160kW G20 natural gas Air temperature: 170-220 ° C Enclosure size: 2600 x 10300 x 3600mm Electrical cabinets included. It requires electronic and mechanical renovation. Purchase of industrial equipment and machinery. Wide Range of Used Machinery, Industrial Equipment

Condition: used, Hardening furnace, muffle furnace, chamber furnace, annealing furnace HERAEUS Type KR 260 Bedpeydqd Tsfx Ahvocw Serial No. 4412 Year of manufacture approx. 1972 Temperature range 850° (max. 1150°C) Internal dimensions W x D x H 240 x 450 x 140 mm Connected load 8 kW Power supply 380 Volt, 50 Hz, 20 Amp. - According to temperature indicator, furnace reaches max. 850° in approx. 1 hr 45 min. - In practical test, at 850° C (per indicator) the furnace switches off electrically. - Temperature display - Temperature setting via 4 switching stages and potentiometer Space requirement L x W x H 750 x 900 x 1600 mm Net weight 160 kg

Year of construction: 2014, condition: excellent (used), Oven volume: 2.366 m³ l Max. temperature: 750 °C Bcsdpfx Aheydl Iajvow Connected load: 84 kW Weight: 3.7 t

Year of construction: 1996, condition: ready for operation (used), Useful dimensions: 700 x 650 x 1,100 mm Bcedpeydlqhofx Ahvew Batch weight: 800 kg Temperature: max. 1,000 °C Heating: Natural gas heated Quench: Oil/Air Equipment: Control Siemens Simatic

Year of construction: 1994, condition: good (used), The system consists of: - 2 pieces of hardening ovens (1 x 10 Cg = 1,000 ° C; 1 x 11Cg = 1,100 ° C) - 1 piece tempering furnace (6 Cg = 650°C) - 1 piece of salt bath - 1 piece of oil bath - 2 washing machines (one per bathroom) - 1 piece charging machine - 2 parking spaces Bcjdpfx Ahsydlpkevew - Fumigation boards per system - Processing plant for salt - 9 preparation spaces - Base grid with cargo carrier - Capacity pto batch 165 kg - Usable dimensions = 400 x 400 x 600 (l x w x h) - Control Siemens S7

Year of construction: 2002, condition: excellent (used), Consisting of: Bcsdpfx Aeydll Sshvow - 2 pieces hardening furnaces 10 Cg gross weight 400 kg - 1 piece of nitriding oven 8 Cg gross weight 400 kg - 1 piece spray washing machine - 2 pieces tempering furnaces - 1 piece of oil quench bath 5000 liters - 1 piece manipulator All technical data for the individual systems can be found in the attached pictures.

Year of construction: 1997, condition: good (used), Consisting of: - 2 pieces hardening furnaces 10 Cg gross weight 400 kg - 1 piece of nitriding oven 8 Cg gross weight 400 kg - 1 piece spray washing machine - 2 pieces tempering furnaces - 1 piece of oil quench bath 5000 liters Bcedpfx Aheydllljvow - 1 piece manipulator All technical data for the individual systems can be found in the attached pictures.

Year of construction: 1973, condition: good (used), rust size: 700 x 650 x 1.100 mm batch weight: 1.000 kg Bjdpoydld Ijfx Ahvjcw Temperature: Max. 750 °C connected load: 78 kW Equipment: Incl. Control system (should be renewed) + Charging machine others: Furnace can be moved under nitrogen

Year of construction: 2026, condition: new, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Bsdpfx Ahefz Anpjvecw Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Year of construction: 2026, condition: new, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ Bedpfjfy T H Isx Ahvscw 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Condition: new, rotary drum dimensions: length: 6000 mm inside: Ø 1600 mm outside: Ø 2280 mm max. temperature: 1200 ° C heating: gas eating power 2700 kW melting capacity: 6000 kg / h Bodpfscmxziox Ahvjcw The plant consists mainly of: - furnace - hydraulic power pack and tilting mechanism - heating system - carousel with molds - charge box - measuring and control system

Condition: new, Electrically heated circulating air furnace (horizontal air flow) max. temperature: 550ᵒC Bcodpfx Aodt R Uuohvow useable dimensions (w x h x d): 900 x 1300 x 1800 mm charge weight: 800 kg gross heating power: 72 kW circulation fan: 1 x 7,5 kW

Condition: new, Gas heated tempering furnace type: KA_TRU_GB external dimensions (w x h x d): 1700 x 2050 x 3900 mm useable dimensions (w x h x d): 600 x 850 x 1800 mm temperature: max. 600°C circulation fan: 4,0 kW Bcjdscdixlopfx Ahvsw loading weight: 3.000 kg gross

Condition: used, Gas heated double chamber furnace, make VEI-Engineering type: KA_GB 10.14.14/d heating: natural gas max. temperature: 550°C working temperature: 250 – 550°C uniformity: ±5 K total connected load: 15 kVA hot gas circulator power: 2 x 5,5 kW (1470 min-1) Bcsdpfx Asdyvipshvsw combustion air blower power: 1 x 1.5 kW (5520 rpm at 95 Hz) burner output: 2 x 100 kW (expandable to max. 2 x 150 kW) number of control groups: 2 useable dimensions per chamber width: 1.000 mm height: 1.400 mm depth: 1.400 mm

Condition: new, useable dimensions (bogie hearth): depth: 4.000 mm Bedpfxjd Nf Sme Ahvecw width: 3.500 mm height: 1.500 mm max. temperature: 1200 °C working temperature: 980 °C heating power: 810 kW divided between 6 burners à 135 kW drive systems bogie hearth: 2 x 0,75 kW number of control groups: 3 PLC: Siemens S7 Please note that we make the furnaces according to customer requirements (e.g., dimensions, temperature, type of heating).

Condition: new, heated length: 4000 mm Bodocdizfspfx Ahvocw conveyor belt width: 900 mm temperature: max. 950 ° C

Condition: new, Electrically heated chamber furnace, make VEI type: KA_EB_TO external dimensions (w x h X d): 2500 x 2900 x 1700 mm usable dimensions (w x h X d): 1250 x 2000 x 1250 mm temperature: 250 ° C Bcjdpfxscdiu Is Ahvsw heating power: 24 kW

Condition: new, High temperature chamber furnace, make VEI max. temperature: 1.200°C Bcsdpfxjdyvkys Ahvsw useable dimensions (w x h x d): 2750 x 500 x 1.100 mm heating power: electrically, 42 kW

Condition: new, temperature: max. 650°C heating power: 45 kW fan: 3,0 kW total connected load: approx. 52 kVA internal dimensions (l x w x h): 1.000 x 700 x 700 mm charge weight: max. 1,0 t Bcodegyn H Njpfx Ahvew