Used Brandt Fp 10 for sale (100)

Condition: good (used), Year of construction: 2001, functionality: fully functional, Used BRANDT KD 68 CF Optimat edge banding machine from 2001. The machine is equipped with several processing units for complete edge processing. Among other things, it features pre-milling units, trimming units, radius milling cutters, corner copying devices, and pull knives for radius and surface finishing. Technical data / Equipment Manufacturer: BRANDT Type: KD 68 CF Optimat Year of manufacture: 2001 Machine no.: 0-261-02-8154 Control system: BRANDT NC 9 Feed speed: approx. 11 m/min Todpezxy Nyjfx Amroc Edge thickness: up to approx. 40 mm Voltage: 400 V Frequency: 50 Hz Control voltage: 24 V Equipment: BRANDT NC 9 control system Pre-milling Trimming units Radius milling Corner copying Pull knives for radius processing Surface pull knife pneumatically controlled units Roller magazine / edge feeder Workpiece transport via feed chain Dust extraction connections on the processing units Central control via control panel Emergency stop The machine is currently still at the customer's site but would be immediately available! Transport is possible for an extra charge! The machine will be inspected before sale. For used machines with a year of manufacture of 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and equipment may vary. Errors, prior sales and changes are subject to change. All information without guarantee.

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Suitable for curved shaped edges Good condition, possible to test ! Todpfx Ajzc Hxqsmrsc

Condition: excellent (used), Year of construction: 2005, Edgebanding Machine Manufacturer: Brandt Model: KDF 540 Profiline Year of manufacture: 2005 Operating hours: approx. 7,718 h Edge thickness: 0.3-3 mm (roll), 8 mm (magazine) Workpiece thickness: 8 - 50 mm Total length: 5,360 mm Connected load: 7 kW Feed speed: 11 m/min Height adjustment: Electric Joint adjustment: Electric Equipment: Jointing unit: Yes End trimming unit: Yes Radius flush milling unit: Yes Tjdeyvr H Iopfx Amrjc Corner copying unit: Yes Radius scraper: Yes Surface scraper: Yes Buffing unit: Yes Spraying device: Yes

Condition: excellent (used), Year of construction: 2010, I sell the fully equipped edge banding machine BRANDT Ambition KDF 650 C, year 2010: Configuration: Entry fence manual adjustable Premilling manual adjustable Edge banding EVA Material pressure zone manual adjustable End cutting saws pneumatic adjustable Tilting radius milling top + bottom servomotorical adjustable Todju E E D Depfx Amrjc Corner rounding 2-motor manual adjustable Radius R2 scrapers pneumatic adjustable Glue scrapers manual adjustable Polishing brushes Control panel Power Control PC20 Working thickness adjustment servomotorical Material height 8 - 60mm Edge thickness 0,4 - 12,0 mm Feeding speed 11/14 m/min. Total length including feeding plate 5860mm Total weight 2600 kg With full Documentation and CE. Very good condition, fully working!

Condition: good (used), BRANDT highflex 1220 edger Kdf220 Pre-milling cutters Replaceable trimming head Tjdpfszy N Nrox Amrec Glue application with a roller Pneumatic pre-trimming guillotine Pressure rollers Finished-edge trimming blades Up-and-down milling unit R1-R2, pneumatically adjustable Corner rounding Profile trimming cycle Flat trimming cycle Max. part height 60mm Max. veneer thickness in roll 3mm Material width min. 70mm Feed rate 11m/min Machine length 455cm Connected power approx. 10KW Machine inspected, ready for operation.

Condition: used, Year of construction: 2002, Machine length: 6240 mm Weight: 2400 kg Power consumption: 14 kW Extraction diameter: 120 / 140 mm Storage location: Nattheim Tsdpfxsvvkfwe Amrsc

Condition: used, Year of construction: 1996, Edge thickness: 0.4 - 12 mm Roll edge: 3 x 45 mm or 0.8 - 60 mm Minimum workpiece width: 65 mm Minimum workpiece length: 160 mm Workpiece thickness: 10 - 55 mm Feed rate: 13 m/min Pre-milling (joining) Glue pot Quickmelt Gluing unit Trimming Flush trimming Chamfering Radius trimming Corner rounding Flat scraper Buffing unit Machine dimensions: 7450 x 1220 x 2400 mm Weight: 3000 kg Tsdpevvkd Tsfx Amrsc Storage location: Nattheim

Condition: excellent (used), Year of construction: 2017, Brandt KDF 1440 Edition Only 1700 operating hours – in very good condition – can also be supplied with a preheating station. XES 200 autonomous unit (+ €4500) available. SUMMARY OF MACHINE EQUIPMENT: JOINTER HEAD 2 X 2.2 KW 200 HZ GLUING UNIT QA 65 N SAWING UNIT BEVEL/STRAIGHT 2 X 0.18 KW PNEUMATIC ADJUSTMENT FOR SAWING BEVEL/STRAIGHT MULTI-STAGE MILLING HEAD MS 40 COUNTER-ROTATING PNEUMATIC 2-POINT ADJUSTMENT SHAPED MILLING HEAD 1 X 0.35 KW WD 60; also for structural flooring PNEUMATIC 2-POINT ADJUSTMENT RADIUS/BEVEL MULTI-STAGE SCRAPER HEAD MZ 40 GLUE JOINT SCRAPER EDGE TRIMMING UNIT Tjdpszb Iggefx Amrsc Overpressure: PU rollers instead of standard rollers Additional application unit QA 65 N (interchangeable) Release agent spray unit for workpiece Automatic edge infeed Multi-roller scanning for multi-stage milling head MS 40 + multi-stage scraper MZ 40 Cleaning agent spray unit WORKPIECE AND EDGE PARAMETERS: – Workpiece width min: – For workpiece thickness 8-22 mm ¦ 70 mm* – For workpiece thickness 23-40 mm ¦ 120 mm* – For workpiece thickness 41-60 mm ¦ 150 mm* *Depending on workpiece length – Workpiece overhang ¦ 38 mm – Workpiece thickness ¦ 8 – 60 mm – Edge height max. = workpiece height ¦ + 6 mm – Edge material, roll ¦ 0.4 – 3 mm – Edge cross-section max. – For PVC ¦ 135 mm² – For veneer ¦ 100 mm² – Roller diameter max. ¦ 830 mm – Edge material, strip ¦ 0.4 – 8 mm – Edge cross-section max. – For strips ¦ 360 mm² – Feed rate ¦ 8 – 14 m/min – Max. feed rate with shaped milling head ¦ 11 m/min – Working height ¦ 950 mm – Pneumatic connection ¦ min. 6 bar – Overall length ¦ 5,573 mm Complete description: see PDF

Condition: ready for operation (used), Year of construction: 2008, Brandt Optimat KDF 420 Edge Banding Machine Powercontrol PC 20 control system Edging thickness: 0.4–8 mm Edging height: 8–60 mm Joint trimming with DIA cutter End trimming Flush and radius trimming Radius scraper blade Tsdsx Dzw Nepfx Amrjc Flat scraper blade Buffing unit Machine length: 4360 mm Operating manual and tools included Year of manufacture: 2008 Price: 15,000.-

Condition: good (used), Year of construction: 2014, Description: see machine photos. Tsdpfx Aey Tm Nfjmrjc

Condition: used, Year of construction: 2006, Modell: Brandt O KDF 530 C Production year: 2006 Installed power: 11,4kW. Tsdpfx Aozkfu Somroc Feed speed: 11m/min Workpiece thickness: 8-40mm. Edge thickness: 0,4-6mm. Premilling unit: Yes Gluing unit: Yes, EVA End trimming unit: Yes Fine trimming unit: Yes Corner rounding unit: Yes Glue srapper: Yes Buffing unit: Yes

Condition: used, Year of construction: 2010, Edge banding machine Todpfxjzuzlbj Amrsc Manufacturer: Brandt Type: Optimat KTD 720 Year of manufacture: 2010 Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: used, Year of construction: 2010, Edge milling machine Tsdpszuzlhsfx Amroc Manufacturer: Brandt Type: FTK 130 Year of manufacture: 2010 Note: The technical data and descriptions are a transcript of the original order confirmation. The data is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 2014, edge thickness (max.): 12 mm, feed rate X-axis: 18 m/min, TECHNICAL DETAILS Workpiece Dimensions Min. panel height: 10 mm Max. panel height: 60 mm Min. panel width: 70 mm Min. edge thickness: 0.4 mm Max. edge thickness: 12 mm Max. feed rate: 18 m/min Feed and Guidance Pressure with idler rollers Panel support guides Unit for Panel Processing Pre-milling unit Automatically timed engagement Motor power: 2.2 kW Edge Gluing Edge roller magazine Glue reservoir for EVA hot melt adhesive Pre-melter for EVA hot melt adhesive Hot air system: AIRTEK Number of pressure rollers: 4 NC-controlled Edge Processing Units Number of edge processing units: 7 End-capping unit Number of motors: 2 Motor power: 0.35 kW Fine milling unit for flush trimming and rounding Number of motors: 2 NC-controlled Motor power: 0.55 kW Corner rounding unit Manufacturer model: WD60 Motor power: 0.35 kW Rough milling unit Motor power: 3.5 kW Edge trimming unit NC-controlled Glue application unit Polishing unit Number of motors: 2 Motor power: 0.18 kW MACHINE DETAILS Tsdpezmtivsfx Amrjc Control and Safety Machine programming software: PowerControl PC20 Safety standard: CE marking Electrical Data Total connected load: 22 kW EQUIPMENT Pre-milling unit Edge roller magazine Glue reservoir for EVA hot melt adhesive Pre-melter for EVA hot melt adhesive Hot air system AIRTEK 4 pressure rollers End-capping unit Fine milling unit for flush trimming and rounding Corner rounding unit WD60 Rough milling unit Edge trimming unit Glue application unit Polishing unit Spray unit Machine programming software PowerControl PC20

Condition: used, Year of construction: 2012, Control POWER CONTROL PC 20+ Panel height (mm) 60 PVC-ABS edge thickness (mm) 3 Solid edge thickness (mm) 12 Feed speed mt/min 20 Upper motorized rubberized belt Manual infeed guide Anti-adhesive group Rightening group Gluing with EVA glue Edge holder plate End trimming group with automatic inclination adjustment Staggered trimming and cornering group with two motors Linear 2-motor rounding group Edge scraper group Glue scraper group Brush group Tsdjwwk Duopfx Amrjc

Condition: used, Year of construction: 2016, Power Touch control (touch screen system) with 21" full HD video Panel height 60 mm Pvc/Abs 3 mm Solid wood up to 12 mm Feed speed up to 20 m/min Working height electronically adjustable by N.C. Panel support guide with idle routines Side roller conveyor with idle wheels for panel support Anti-adhesive group Two-motor rectifier group Roll holder plate EVA glue gluing group with pre-melting unit and glue pot Edge pressure group on straight profiles with pressure rollers automatically adjustable by numerical control End trimming group with automatic inclination adjustment Two-motor chamfering group with adjustment 2-motor multifunction rounding group (chamfering + rounding) Edge scraping group with electronic adjustment by numerical control Glue scraping group Brush group Anti-adhesive group Todjwwtpyepfx Amrjc

Condition: excellent (used), Year of construction: 2006, I sell the fully equipped edge banding machine BRANDT Optimat KDF 550 C, year 2006: Configuration: Entry fence manual adjustable Premilling manual adjustable Edge banding EVA Todpfx Amoq A N Nujrsc Material pressure zone manual adjustable End cutting saws pneumatic adjustable Tilting radius milling top + bottom manual adjustable Corner rounding 2-motor manual adjustable Radius R2 scrapers pneumatic adjustable Glue scrapers manual adjustable Polishing brushes Control panel Power Control PC20+ Working thickness adjustment servomotorical Material height 8 - 50mm Edge thickness 0,4 - 8,0 mm Feeding speed 11 m/min. Total length including feeding plate 5860mm Total weight 2660 kg Very good condition, fully working!

Condition: good (used), Brandt edge banding machine with AIRTEC + jointing unit Adhesive: EVA / PUR / Airtec Roll material: 0.4-3 mm edge thickness Strip material: 0.4-15 mm (12 mm) edge thickness Workpiece thickness: 8-60 mm Recently serviced! Jointing unit OVERVIEW OF UNIT CONFIGURATION: JOINTING MILLING UNIT 2 x 2.2 kW 200 Hz GLUING UNIT A12 END TRIMMING UNIT CHAMFER/STRAIGHT 2 x 0.35 kW PNEUMATIC ADJUSTMENT END TRIMMING CHAMFER/STRAIGHT PNEUMATIC 2-POINT ADJUSTMENT END TRIMMING PRE-MILLING UNIT 2 x 0.55 kW 0 DEGREES PNEUMATIC 2-POINT ADJUSTMENT MULTIFUNCTION SHAPING MILLING UNIT 2 x 0.4 kW PROFILE SCRAPER WITH QUICK-CHANGE HEADS PNEUMATIC SCRAPER ADJUSTMENT GLUE JOINT SCRAPER BUFFING UNIT Feed speed: 8-18 m/min, with contour milling cutter 14 m/min Total length: 5760 mm Roll material: 0.3-3 mm Strip material: 3-15 mm (With VKNR 4845 exchangeable milling units, max. edge thickness is 12 mm!) GLUING UNIT A12 WORKPIECE PRE-HEATING QUICKMELT APPLICATION UNIT ADHESIVE REACTIVATION Infrared Workpiece return system BOOMERRANG TFU 140/R 20 Year of manufacture: 2016 As shown in illustrations Available from November 2026 Todpeyz Sxbjfx Amrec All data taken from the data sheet, therefore subject to change Technical specifications available on request

Condition: excellent (used), Year of construction: 2014, I sell the fully equipped edge banding machine BRANDT Optimat KDF 220 C, year 2014: Configuration: Entry fence manual adjustable Premilling manual adjustable Edge banding EVA glue / PUR glue possible Material pressure zone manual adjustable End cutting saws pneumatic adjustable Tilting radius milling top + bottom manual adjustable Corner rounding 1-motor manual adjustable Radius R2 scrapers pneumatic adjustable ( set of R1 included) Control panel Working thickness adjustment servo driven Material height 8-50mm Edge thickness 0,4-3mm Feeding speed 10m/min. Total length including feeding plate 4150mm Total weight 1320kg Plus one additional glue tank included. Very good condition, fully working! Including full documentation and CE. Available immediately. Todpfsu N T Ewsx Amrsc

Condition: good (used), Year of construction: 2007, functionality: fully functional, For sale: an edge banding machine of the brand Brandt KDF 660. Todpfsyhqa Nsx Amrec

Condition: used, Year of construction: 1989, Used Machine Features and Technical Specifications: - Small machine for processing molded parts - Processes hot-melt adhesive-coated edging material, which is reactivated using hot air - The workpiece is automatically fed by pressing it against the central, driven pressure roller, ensuring uniform adhesive reactivation and, consequently, reliable bonding - Thermostatic temperature control via a dial thermostat - Maintenance-free three-phase hot-air blower for continuous operation - Automatic airflow deflection - Pneumatically operated roller cutting device trims even the toughest veneer and PVC edges - Foot switch for processing molded parts - Workpiece thickness: 10–50 mm - Heating power: 3 kW Tedpfezk N Ehsx Amrsc - Connected load: 3.3 kW - Workpiece width (min.): approx. 25 mm - Edge thickness approx. 0.5–1 mm - Minimum inner radius approx. 25 mm - Feed rate 4 m/min. - Pneumatic pressure: 6 bar Weight: approx. 105 kg Availability: available shortly Location: Röllbach

Condition: used, Year of construction: 2008, POWER CONTROL PC 20+ Panel height (mm) 60 PVC-ABS edge thickness (mm) 3 Solid wood edge thickness (mm) 12 Feed speed 20 m/min Manual infeed guide Pre-trimming unit EVA glue application and pre-melting unit Edge holder plate End trimming unit Two-motor overlapping trimming unit Two-motor staggered chamfering unit with NC adjustments Two-motor rounding unit Edge scraper unit Glue scraper unit Brush unit Tedpfew Db Rfjx Amrjc

Condition: used, maximum load weight: 200 kg, overall weight: 1,600 kg, axle configuration: 1 axle, first registration: 05/1993, total length: 5,700 mm, total width: 2,500 mm, total height: 3,000 mm, Selling a Brandt beverage dispensing trailer. * 1 pass-through cooler Tsdpfezy S T Tsx Amrjc * 4 beer taps * Lighting – new * Car trailer hitch * New TÜV (technical inspection) upon purchase * Sale according to § 25a. No VAT. * Errors and prior sale excepted.

Condition: used, Year of construction: 2004, - Pre-milling unit - Glue application unit (hot melt) - Pressure zone with pressure rollers - Cut-off saw - Edge trimming/radius milling unit (top and bottom) - Corner rounding unit - Radius scraping blade - Glue scraping blade - Polishing units Edge banding machine Manufacturer: Brandt Type: KDF 560 Year of manufacture: 2004 Technical data - Voltage: 400 V / 50 Hz / 3 phases - Connected load: 13.2 kW - Fuse rating: 35 A Equipment - Automatic unit adjustment via the PC control system - Control: Brandt Power Control PC20+ - Suitable for thin and thick edges (ABS, PVC, veneer, and solid wood edges) - Edge thickness: approx. 0.4 to 8 mm - Workpiece height: approx. 8 to 50 mm - Feed speed: 14 m/min Installed units - Pre-milling unit - Glue application unit (hot melt) - Pressure zone with pressure rollers - Cut-off saw - Edge trimming/radius milling unit (top and bottom) Tjdjzux T Aepfx Amrec - Corner rounding unit - Radius scraping blade - Glue scraping blade - Polishing units Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: excellent (used), SINGLE SIDE EDGE BANDER (RIGHT) Edges (band in rolls) thickness (Min/Max) mm 0,3/ 3 Edges thickness in stips / lippings (min/max) mm 0,4 / 8 Panels thickness (min/max) mm 8 / 60 Numerical Control POWERTOUCH Feeding speed (adjustable) m/min 8 - 14 Top pressure system with rubber wheels Spraying unit (Anti-sticking liquid) In-feed fence, adjustable by N.C. Pre-milling Unit (vertical joint trimmers) (2 x Kw 2,2) Lamps to heat the workpieces side Glueing Unit (Hot Melt Glue + Quick Melt system) QA65 N Edge coils supporting unit (reels N°) 1 Snipping (end-cutting) (2 x Kw 0,22) Fine Trimming unit (2 x Kw 0,55) Corners Rounding (contour trimming) (1 x Kw 0,35) Profile edge scraping unit MZ40 Glue scraping unit Tjdpfezyahxox Amrjc Buffing unit (2 x Kw 0,09)