Used Brandt Kd 84 for sale (97)

Condition: used, Year of construction: 1985, edge thickness 0,4 - 12 mm work piece thickness 10 - 55 mm work piece length min 160 mm work piece width min 65 mm feed speed 13 m/ min compressed air 7 bar machine length 5420 mm weight 1950 kg glue pot with quick melt system glue application roller wit left and right turning edge magazine for PVC and strips motor height adjustment for pressure beam pneumatic pressure rollers for edge magazine control panel, rotatable all aggregates in-line controlled cutting milling combination with 2 aggregates, 1st aggregate straight, 2nd aggregate radius and phase milling tool draw blade Ioljc Tmygshcdwzoib buffing unit central lubrication for transport chain quick change system edge control system with error msg IR heater CE Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: used, Year of construction: 1994, Used machine Year of manufacture: 1994 Condition: as is/was in production until recently Equipment and technical data: Glue application unit with glue pot and applicator roller Pressing station Cut-off unit with linear guides Flush trimming unit with horizontal and vertical sensing with 200 Hz motors swivelable 0 - 30° with radius scraper with buffing unit Iielhcdjy Nuhbewzsb Edge thickness 0.4 - 5 mm Coil separation 0.8 x 60 or 3 x 30 mm Workpiece width min. 55 mm Workpiece length min. 160 mm Workpiece thickness 10 - 55 mm Feed rate 11 m/min Pneumatic connection 6 bar Dimensions 3855 x 1000 x 1610 mm Extraction connection 100 mm Weight 1000 kg Availability: approx. June 2026 Location: Baden-Württemberg

Condition: good (used), Brandt edgebander (Homag group) for roll and ABS edge banding. Complete with pre-milling units at entry and all profiling groups with corner rounding units. In perfect working condition. Iieljy N Ukijhcdwzeb

Condition: used, Year of construction: 1996, Edge thickness: 0.4 - 12 mm Roll edge: 3 x 45 mm or 0.8 - 60 mm Minimum workpiece width: 65 mm Minimum workpiece length: 160 mm Workpiece thickness: 10 - 55 mm Feed rate: 13 m/min Pre-milling (joining) Glue pot Quickmelt Gluing unit Trimming Flush trimming Chamfering Radius trimming Corner rounding Flat scraper Buffing unit Machine dimensions: 7450 x 1220 x 2400 mm Weight: 3000 kg Storage location: Nattheim Iielovvkd Tehcdwzob

Condition: used, Year of construction: 2002, Machine length: 6240 mm Weight: 2400 kg Power consumption: 14 kW Extraction diameter: 120 / 140 mm Storage location: Nattheim Iolhcjvvkfwjdwzjib

Condition: repair required (used), Year of construction: 1996, Edge banding machine Brandt Optimat KD 69 0 In need of repair, the control system no longer functions properly Without premilling Iiolhcdwjylttgjzjb Edge trimming front/rear Corner rounding top/bottom Corner rounding front/rear Scraper top/bottom Polishing top/bottom

Condition: excellent (used), Gluing machine Ijlhcdwettu Riezsib Guillotine cross-cut saws milling cutter Scraper Polishing machine

Condition: excellent (used), Gluing unit Cross-cut saw Two straight cutters Two rounding cutters Iielhexdy Sljcdwzob

Condition: good (used), Year of construction: 2004, The machine is equipped with a joint milling unit, cross-cutting unit, 2 saws, milling station, corner copying, radii with flat scraping blade. Total connected load: 10 kW, compressed air connection: 6 bar. Air consumption per cycle: 43 l/min. Dimensions: 4740 x 1635 x 1706 mm. Body dimensions: 3100 x 1040 x 1706 mm. Edge thickness: 0.4 – 8 mm. Good condition. Transport available at extra cost! Ieljyl Uurshcdwzjib Due to the age of the used machine, warranty is excluded for sales to commercial customers.

Condition: used, Year of construction: 2008, Connected load: 15 kW Feed speed: 14 (11) m/min Workpiece thickness: 8 - 60 mm Edge thickness: 0.4 - 8 mm Roller separation: max. 3.0 x 45 / 0.8 x 65 mm Extraction diameter: 120 / 160 / 100 mm Working height: 950 mm Dimensions: 6260 x 1560 x 2300 mm Weight: approx. 3000 kg Storage location: Supplier Iijlhcey Ruzqsdwzeb

Condition: excellent (used), Year of construction: 2007, About the machine: Workpiece thickness: 8 - 50 mm Edge thickness: 0.4 - 3 mm Feed speed: approx. 9 m/min Connected load: 4.1 kW Compressed air connection: 6 bar Weight: approx. 750 kg Iislhcdsy Sphbswzob Machine length: 3150 mm No jointing Pre-trimming Flush cutting Radius and flush milling Radius scraper blade

Condition: ready for operation (used), Year of construction: 2008, Brandt Optimat KDF 420 Edge Banding Machine Powercontrol PC 20 control system Edging thickness: 0.4–8 mm Edging height: 8–60 mm Joint trimming with DIA cutter End trimming Flush and radius trimming Radius scraper blade Flat scraper blade Buffing unit Machine length: 4360 mm Islsx Dzw Nshcdwzeib Operating manual and tools included Year of manufacture: 2008 Price: 15,000.-

Condition: used, machine/vehicle number: 006216, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt Ijlsy Nk Ahshcdwzeib Premilling Unit: yes Corner Rounding Unit: yes Grooving Unit: yes Max feed speed: 18 m/min

Condition: used, machine/vehicle number: 007834, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt, Hot Air Premilling Unit: yes Islhcdsv Sf I Eewzsib Corner Rounding Unit: yes Max feed speed: 18 m/min Maximum panel thickness: 60 mm Operating Units: 8 nr

Condition: used, machine/vehicle number: 007517, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt, Hot Air Premilling Unit: yes Corner Rounding Unit: yes Grooving Unit: yes Max feed speed: 18 m/min Maximum panel thickness: 60 mm Operating Units: 9 nr Iislhcdwjwuz E Rezob

Condition: used, machine/vehicle number: 008371, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt Corner Rounding Unit: yes Max feed speed: 16 m/min Maximum panel thickness: 60 mm Operating Units: 7 nr Ijlhcdwsx Swfbjzeib

Condition: used, machine/vehicle number: 007251, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt, Hot Air Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 20 m/min Maximum panel thickness: 60 mm Operating Units: 8 nr Iijlhcjtvrf Tjdwzob

Condition: used, Edge banding machine Brand: Brandt Model: Profiline KDF 670-C Hiflex Single-sided edge banding machine in right-hand design, for hot melt gluing. Quick-change gluing unit for hot melt glue. Processing with PU glue granulate possible in accordance with glue specifications. Leak-proof glue reservoir under the glue roller. Precise glue application to the workpiece with glue roller, no adjustment of workpiece thickness necessary. Glue roller with selectable rotation direction for counter or forward feed. Glue temperature monitoring via electronic thermostat. Automatic reduction of glue temperature during work breaks. Infrared heating for hot melt reactivation. Automatic edge banding magazine for roll material and fixed lengths, including roll plate with a diameter of 800 mm and reinforced cutting shears for thick PVC/ABS, max. 3 x 45 mm. Standard equipment with edge banding and workpiece – distance monitoring with optical display. Stable pressure zone with driven, compressed air-loaded main pressure roller and 3 free-running post-press rollers. Standard equipment with automatic central lubrication for the transport chain. Motor-driven adjustment of overpressure. Control panel at the machine infeed. Islhcdsynhwfowzoib Technical data Edge strip thickness: 0.4 – 12 mm Cutting tool: max. 3.0 x 45 mm or 0.8 x 65 mm Workpiece thickness: 8 – 60 mm Feed speed: 11 – 16 m/min (see below) When selecting edge banding thicker than 3 mm, the feed speed is automatically switched to 14 m/min. automatically to 14 m/min. When selecting form cutters, the feed rate is automatically switched to 11 m/min. Electrical connection: 400 V, 3-phase, 50 Hz Compressed air connection: 6 bar Connected load approx. 17 kW Machine length: 6,860 mm Full information about the machine can be found on our webpage burbagemaskin.se

Condition: used, Year of construction: 2003, machine/vehicle number: 0281062425, Used Edge Banding Machine Year of manufacture: 2003 Equipped with a gluing unit for hot-melt adhesive granules Glue reservoir located below the glue roller Glue application via roller (co-rotating and counter-rotating modes) Features: Automatic edge magazine (coil and strip material) Pressure zone with pneumatically driven main pressure roller and additional rollers for optimal bonding of the glue layer Iielhcdoy Nxgnewzeb Centrally adjustable top pressure Central manual lubrication of the chain conveyor Control panel at the machine infeed Machining Units: End trimming unit (saw units) for front and rear overhang 2 motors, each 0.18 kW Swivel range: 0–15° Flush trimming unit (top and bottom) with vertical and horizontal tracing Swivel range: 0–15° 2 motors with interchangeable cutters (straight/radius) Digital counters for fast and precise adjustments Pneumatic two-point adjustment Buffing unit for final finishing Additional Equipment: Extendable support table up to 350 mm Integrated section control (contactless operation) Settings via keyboard and LED display Technical Data: Workpiece thickness: 8–50 mm Edge thickness: 0.4–3 mm Feed speed: approx. 9 m/min Connected load: 4.1 kW Compressed air: 6 bar Weight: approx. 750 kg Machine length: 3,150 mm Location: Bulgaria

Condition: used, machine/vehicle number: 008477, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 18 m/min Maximum panel thickness: 60 mm Operating Units: 7 nr Iielhcdoy Hq Nvjwzjb

Condition: used, Year of construction: 2008, machine/vehicle number: 0-261-06-5499, functionality: fully functional, workpiece height (max.): 42 mm, edge thickness (max.): 8 mm, height adjustment type: mechanical, actuation type: electric, total height: 1,600 mm, total length: 4,800 mm, total width: 800 mm, year of last overhaul: 2026, Edge banding machine is being sold due to the purchase of a new machine and conversion to PU. Maintained regularly, runs flawlessly. Includes two additional gluing units. Suction pipe assembly included. The machine is still in operation and can be inspected and tested. Iiolhcey I Apkedwzeb

Condition: used, Year of construction: 2004, total height: 2,100 mm, total length: 7,400 mm, total width: 1,100 mm, overall weight: 3,200 kg, Equipment: CE marking, No. 3267 Edgebander / edge banding machine Brandt KDF 680 Used, year of construction 2004 Workpiece thickness 8 - 60 mm Edge thickness 0.4 - 12 mm Iislhcsy Df N Ssdwzeb Control system Brandt Power Control PC 16 Joint milling unit Gluing unit Quickmelt Combination milling unit for flush milling, chamfer milling, radius milling Trimming unit automatically adjustable from chamfer trimming to straight trimming via program Rounding unit (front side) Profile scraper unit / Rounding scraper unit Surface scraper unit Buffing unit for polishing edges Release agent spray system Special equipment: Hot-air system Schugoma HDL3020 (retrofitted) Hot-air process for processing laser edges (co-extruded edge) to create a visually seamless joint Transport dimensions approx. 7400 x 1100 x 2100 mm LWH Weight approx. 3200 kg Sale on behalf of customer, ex location near 71063 Sindelfingen, without dismantling, without transport and assembly Dismantling, loading, and transport by us optionally available Subject to errors in the description and price To avoid any misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to the manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Photos and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipping Terms of delivery: Ex location

Condition: good (used), Year of construction: 2007, functionality: fully functional, EDGE BANDING MACHINE WITH JOINTING AND COPY MILLING; SEPARATING AGENT APPLICATION, Technical Data: Workpiece thickness: 8 - 50 mm Edge thickness: * Fixed lengths: 0.4 - 8.0 mm Iijlhcdsy Dcipswzjb * Rolls: 0.4 - 3.0 mm (max. 0.8 x 55 mm or 3 x 45 mm) Feed speed: 11 m/min Electrics: 400 V, 50 Hz, 3-ph Equipment: Adjustable infeed fence Centrally adjustable top pressure Central manual chain lubrication Control panel at machine infeed Separating agent application Jointing cutter unit: 2 x 2.2 kW 1 x with feed direction and 1 x against feed direction

Condition: used, BRANDT Optimat KDF340 Edge Bander Pre-milling cutters Adhesive application by roller Pneumatic pre-cut guillotine Pressure rollers End-cutting saws Top-bottom milling unit R1-R2 Profile scraper Polishing unit Max. workpiece height: 45 mm Max. edge thickness from roll: 3 mm Feed speed: 10 m/min Machine length: 350 cm Iijloy Dc Ulohcdwzob Machine inspected, ready for operation

Condition: good (used), Year of construction: 2006, - Infeed fence: manually adjustable - Jointing milling unit with 2 motors, each 2.2 kW: both motors pneumatically controlled - Hot-melt adhesive application - Pressure zone: with 1 main pressure roller and 3 follow-up pressure rollers - End trimming unit with 2 motors, each 0.35 kW: automatically adjustable via program from chamfer cuts to straight cuts - Edge milling unit with 2 motors, each 0.55 kW: for flush milling, bevel milling, or radius milling with 4-point fixed position adjustment for side tracing - Groove milling unit: with horizontal spindle - Copy milling unit with 2 motors, each 0.35 kW: with pneumatic infeed and outfeed control - Profile scraper unit: with pneumatic infeed and outfeed control - Flat scraper unit - Buffing unit Iislhcdoy Av A Hjwzsb