2012 Brandt Ambition 1650 (KDF 650)

Brandt Ambition 1650 (KDF 650)

Condition: ready for operation (used), Year of construction: 2011, machine/vehicle number: 0-261-20-5976, functionality: fully functional, workpiece height (max.): 60 mm, feed rate X-axis: 20 m/min, controller model: POWER CONTROL PC 20+, TECHNICAL DETAILS Panel height: 60 mm PVC-ABS edge thickness: 3 mm Solid wood edge thickness: 12 mm Feed speed: 20 m/min MACHINE DETAILS Control: POWER CONTROL PC 20+ Operational current (full load): max. 33 A Largest motor: 9.7 A Largest heating circuit: 2.7 A Fuse: 35 A Frequency: 50 Hz Iaedpfoyzm E Nsx Aa Ejw EQUIPMENT Upper motorized rubberized belt Manual infeed guide Anti-adhesive unit Jointing unit Gluing with EVA adhesive Edge support plate End trimming unit with automatic tilt adjustment Offset trimming and corner rounding unit with two motors Linear contour rounding unit with two motors Edge scraper unit Glue scraper unit Buffing unit External reference: MMG014

Condition: used, machine/vehicle number: 008125, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt, Hot Air Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 18 m/min Iaedpew Tivmofx Aa Eew Operating Units: 7 nr

Condition: excellent (used), SCM T150 Spindle Moulder Spindle diameter: 35 mm Total spindle length: 180 mm Electric spindle lift Electric fence movement Electrically adjustable tilt angle -10/45° Iaedpjw Ral Hofx Aa Eew Variable spindle speed: 3000-4500-6000–7000-10000 rpm Motor power: 5.5 kW DTR technical documentation

Condition: used, Year of construction: 2008, POWER CONTROL PC 20+ Panel height (mm) 60 PVC-ABS edge thickness (mm) 3 Solid wood edge thickness (mm) 12 Feed speed 20 m/min Manual infeed guide Pre-trimming unit EVA glue application and pre-melting unit Edge holder plate End trimming unit Two-motor overlapping trimming unit Two-motor staggered chamfering unit with NC adjustments Two-motor rounding unit Edge scraper unit Glue scraper unit Brush unit Iajdow Db Rfspfx Aa Eew

Condition: used, machine/vehicle number: 008438, Max. panel width: 4500 mm Max. panel length: 4500 mm Main saw blade projection: 50 mm Iasdsyngy Sjpfx Aa Esw No of Grippers: 8

Condition: good (used), Year of construction: 2011, Internal flange dimensions 2340 x 1340 mm Maximum panel dimensions (20mm thickness) 2340 x 1240 mm Iaodpfjtwba Sex Aa Eow Working chamber height 60 mm Total thrust 300 t Maximum specific working pressure 5 kg/cm2 Press cylinders No. 6 diam 140 mm stroke 250 mm Lower moving platen (closing movement from bottom to top) Opening between press platens 230 mm Side load 1400 mm Pvc roller uncoiler Double loading table

Year of construction: 2008, condition: ready for operation (used), functionality: fully functional, * Wemhöner Basic 1000 Plus - Year of manufacture: 2008 - Very good condition, little used * Type: KT-MB-28/15-240 * With automatic pin system and inline turn-over device * 2 tables with automatic variable pin system * With Teflon coating for pre-glued foil * Foil laying system for the pin table (pre-glued foil) * Heating plate size: 2800 x 1500 mm * Maximum workpiece size: 2,540 x 1,250 mm * Membrane: Yes * Cutting station * Foil paternoster storage, 3.2 m height with 14 suspension rods * Siemens S7 PLC control * Operator panel for PLC control: SIEMENS TP 270 (touchscreen) * Automatic membrane tensioning * Installed power supply: 38.5 kW * Maximum chamber pressure: 6 bar * Maximum press opening: 150 mm * 6 cylinders with Ø 125 mm * Operating voltage: 400V 50/60Hz * Press chamber height: 40 / 60 mm * Max pressing force: 2400 kN * Hydraulic system operating pressure: 320 bar Isdpfx Aasxbcuds Ejaw

Condition: used, machine/vehicle number: 006279, X axis working area: 3100 mm Y axis working area: 1250 mm Working Table: Flat table Number of controlled axes: 3 axes Total number of drilling spindles: 11 Total number of tool changer positions: 8 Isdpfx Aekw H Ekoa Eoaw

Condition: used, Year of construction: 2008, · Working area X-Y-Z: 3,660 x 1,550 x 130 mm · Travel length X-Y: 4,200 x 2,000 mm Description of the units and accessories (base) The structure of the base body is a monolithic construction made of thick-walled steel. It is stiffened by welded triangular plates across the entire machine bed, making it extremely stable. The triangular shape used for load-bearing parts, with a large base, is the secret to ensuring lasting precision and stability. The machine layout allows the user an optimal workflow despite minimal space requirements. The base body constructed in this way therefore offers the machining unit a balanced and secure base with particularly good load distribution. The mobile unit carrier in gantry design is made of a solid monoblock. It is positioned in the X direction on prismatically ground guides via recirculating ball slides. The work unit is mounted on this mobile unit carrier on prismatic, ground guides and a recirculating ball slide. Axis movement: The drive system in the Y and Z axes is provided by ground, high-precision recirculating ball screws. The X-axis is driven by a backlash-free, preloaded precision rack and pinion drive. This ensures balanced load distribution during the positioning process. This characteristic is important for ensuring balanced movement even in more complex tasks. The various axes are driven by brushless three-phase servo motors/brushless AC motors. These offer excellent positioning speeds thanks to very short ramp times. Furthermore, the measuring system is fully integrated into these motors. These properties make this type of drive completely maintenance-free. · Rapid traverse in X: 40 m/min · Rapid traverse in Y: 60 m/min · Rapid traverse in Z: 22.5 m/min Vacuum system (basic) · Vacuum pump: 100 cbm/h · Power: 2.5 kW · Max. negative pressure (connection) 0.9 bar Control / control cabinet · Office PC or industrial PC (see options) · Basic NC control: ESA-GV KVARA 6.0 · Cable remote control with the most important functions ELECTRIC/ELECTRONIC CNC CONTROL Universal is equipped with a powerful NC control. The integrated office PC gives the NC control an unparalleled level of familiarity: the software runs on Windows XP and allows quick and easy programming, which is easy to learn even for inexperienced users. The system is open and allows the connection of CD-ROM drives, audio cards, barcode readers, modems, printers, scanning systems, etc. Furthermore, the installation of all network systems, as well as all commercially available CAD programs, is possible. To reduce space, the control cabinet is located under the machine table, and the operator works at a separate terminal on casters, which can be freely positioned. XILOG PROGRAMMING SYSTEM Software features: - Import of DXF files - Import of ASCII files - User interface in the operator's native language (available for languages I - GB - F - D - E) - Linear and circular interpolation in three axes, linear in space, spiral in the selected plane - Assisted programming - Calculator for direct transfer of calculated data - Graphic and syntax aids for drilling and milling operations - Parametric programming to perform the same panel machining on different Iodpevvi Rfofx Aa Eoaw

Condition: used, functionality: fully functional, machine/vehicle number: H2X393F01980, Year of construction: 2015, operating hours: 14,760 h, load capacity: 3,500 kg, lifting height: 3,550 mm, free lift: 150 mm, load center: 500 mm, fuel type: diesel, construction height: 2,514 mm, power: 44 kW (59.82 HP), fork length: 2,300 mm, front tire type: cushion tires (black), front tire size: 27x10-12, rear tire type: cushion tires (black), rear tire size: 23x9-10, empty load weight: 4,850 kg, color: red, Equipment: CE marking, adjustable boom, cabin, lighting, Linde Forklift with Long, Plastic-Coated Forks VERSION: LINDE Diesel Forklift Model H35 D (3B) Load capacity: 3,500 kg at load center: 500 mm Series: 393-02 PEDALS: Dual pedal system Maximum driving comfort and optimal productivity through Linde dual pedal operation DRIVE AXLE TIRES: Super-elastic 27x10-12 STEER AXLE TIRES: Super-elastic 23x9-10 STANDARD LIFT MAST 188: Lift height: 3,550 mm Height overall: 2,514 mm Free lift: 150 mm CARRIAGE: 1,150 mm / 6 rollers / up to 3.5 t DRIVER'S CAB: Standard full cabin / overall height: 2,210 mm Full cab offers complete weather protection including: Roof window with wiper, front and rear windows with wipers, Metal doors with side windows DRIVER'S SEAT: Comfort seat, air-suspended, fabric cover Swivel function DRIVER'S STATION EQUIPMENT: Hot water heating Radio / Bluetooth® / USB / SD Panoramic interior mirror Exterior mirrors left & right Clipboard with LED lighting OPERATION: Central lever control LLC AUXILIARY HYDRAULICS OPERATION: Cross lever control AUXILIARY HYDRAULICS: Dual auxiliary hydraulics on vehicle side Standard dual auxiliary hydraulics on lift mast LIGHTING: Work lights, mounting positions 3 and 4, LED Two front-facing headlamps – top left and right Work lights, mounting positions 7 and 8, LED Two rear-facing headlamps – top left and right Ijdpfsyr I Niox Aa Esaw Switchable via roof console using 3-position switch (On/Off/Reverse mode) ENVIRONMENT: Dust cover mounted higher VEHICLE TECHNOLOGY: Tilt position preselection PAINTWORK: RAL 2002 Red ATTACHMENT: Durwen Fork Positioner RZV 35 GS with separate side shift +/- 100 mm, with bolted, plastic-coated forks 2300 x 140 x 50 mm, Frame width: 1,150 mm Opening range (fork-arm to fork-arm): 490 - 1230 mm