Used Bottle Washer for sale (2,382)

Condition: used, Year of construction: 2003, Empty bottle inspector for glass bottles Additional title: Empty bottle inspection machine Filling line output: 7000 bo/h Power: 2000 VA Voltage: 230 V Frequency: 50/60Hz Cedpfjxbn Uvex Akcjrb Formats: 0,5 l NRW, 0,33 l Steinie, 0,33 l Longneck Operation / Control: Heuft Position: free standing Base construction: Self-supporting housing / machine table, on square tubes with spherical feet

Year of construction: 1993, condition: used, Bottle washing machine Nagema GM Arcade Year of construction 1993 Output 23,000 bph Additional title: Single-ended machine Capacity: 21000 bo/h Cjdpfjvcqgzsx Akcerb Bottles each row: 16 bo/row Length: 8,64 m Width: 4,47 m Height: 1,92 m Weight: 17900 kg Formats: 0,5 l NRW-Bottle Features: Heated by steam; smoke suction; insertion sieves; caustic settling tank Periphery: S5 controll (HMI Lauer)

Year of construction: 2001, condition: used, New bottle depalletiser on two levels. This new bottle skimming machine is a depalletiser with lifting frame in single-mast design. The mast is fitted with guide rails to support the vertically moving, roller-guided frame. The transfer device is attached to the lifting frame. The bottles are discharged in the upper area. The infeed and outfeed of the pallet transport is located under the transfer device. Our team at VBW Asset Trade will be happy to answer your questions. Send us an inquiry or simply give us a call! Additional title: Depalletiser with lifting frame Capacity: 140 layer/h Power: 8,75 kW Codpfxox T Ai Is Akcsrb Voltage: 230/400 Volt Frequency: 50 Hz Compressed air: 5,0 bar; 8,0 Nm³/h Length: 4020 mm Width: 3400 mm Height: 5425 mm Weight: 3800 kg Formats: europalett (1200 x 800 x 140 mm) Operation / Control: control box / Siemens S7 Material: Painted mild steel Position: free standing Base construction: Square tube frame Features: Pallet infeed, -outfeed, -magazine; base frame with lift truck, shaft walls, layer pad gripper, clearing table, linear unit, push flap, centring, push-off plate, cardboard lifter, magazine, slip lid magazine, stairs/platforms, protective grille, control system Periphery: Bottle conveyor belts approx. 20 m, pneumatic transport approx. 50 m

Condition: used, Year of construction: 2021, Gravimetric short-tube glass bottle filler with 16 filling valvesand crown cork capper. Controlled via Eaton PLC. Additional title: gravity filling and crown cork capping Cedpfx Aksxbpchscerb Capacity: 2800 bo/h max. filling volume capacity 2,200 l/h Power: 4,5 kW Voltage: 380 V Frequency: 50 Hz Compressed air: 14,4 Nm³/h, 5 - 6 bar, 8 mm connection Length: 2,30 m Width: 1,42 m Height: 2,50 m Weight: 1800 kg Formats: Longneck 0,33 l, Vichy 0,33 l, Steinie 0,33 l, Belge 0,75 l - crown corks 26 mm Operation / Control: SPS Eeton Features: 16 filling valves, 1 capping head, beer connection clamp DN32

Year of construction: 2007, condition: used, Additional title: Residual liquid, bottom, mouth, sidewall control Csdpfx Akexbpg Hecorb Capacity: 32000 bottles/h Power: 3,6 kW Voltage: 400 V Frequency: 50/60 Hz Compressed air: min. 6 - max. 10 bar Length: 2,5 m Width: 1 m Height: 2,5 m Weight: 1700 kg Formats: Longneck-, Steini-, Vichy- 0,33 l bottles / 0,5 Longneck-, NRW- 0,5 l bottles Running direction: right-left Operation / Control: Heuft Features: residual liquid, bottom, body, mouth, side wall

Condition: used, Bottling line for approx. 5000 bottles/h Cedevcqd Tspfx Akcjrb Additional title: returnable glass bottle filling, years of construction 199 Capacity: 5000 bo/h Formats: Eurobottle 0,5 l, Longneck 0,33 l , swing top 0,5 l Features: Unpacker (JOHA Diamant M1), bottle washer (Klinger, , bph, empty bottle inspector (Heuft Reflexx InLine IR, , bph) bottle filler and capper (Hormes), swing-top capper (AMS, 1997, 15 capping units, 6,000 bph) Labelling machine (Gernep, 2 bph), packer (JOHA Diamant M1), crate washer, caustic settling tank

Condition: used, Year of construction: 1991, Nominal capacity of filler: 60000 b/h Power: 10,7 kW Water: max. 4 bar, consumption: 1,3 l/min Compressed air: 6 bar, consumption: 2,5 bar, 30 N/m³/h Length: approx. 2.995 mm Width: approx. 2.370 mm Height: approx. 2.600 mm Weight: 5200 kg Formats: 0,33 l LongNeck-, 0,5 l NRW-bottles, bottle height: min. 150 mm/ max. 350 mm, diameter: 71 mm Machine partitioning: 94 mm Operation / Control: Siemens S5 Features: inspections: bottom inspection, mouth inspection, sidewall inspection, caustic detection High frequency, residual fluid detection Infrared, evaluation for detection and separation of bottles with heavy abrasion, height detection Crsdpfx Akovcqyhocsb

Condition: used, Year of construction: 1996, Bottle filling line with an output of 30,000 bottles/h. 0.33l Vichy 0.33 Ale and 0.5l NRW single-use and reusable bottles are used. The system consists of the following machines/components: -Depalletizing system Manufacturer: Kettner -New glass remover Manufacturer: Kettner -Empty container control Manufacturer: Heuft -Uncorker/unscrewer Manufacturer: Rink -Unpacker Manufacturer: Kettner -Bottle washing machine Manufacturer: KHS -Crate washer Model: KWZ-20 - No.115 -Empty bottle inspector Manufacturer: Heuft -Bottle filler Manufacturer: KHS -2 closure feeders Manufacturer: Gassner -Bottle level control Manufacturer: Heuft -Labeler Manufacturer: Krones -Label control Manufacturer: Heuft -Packer Manufacturer: Kettner -Palletizing system Manufacturer: Kettner -Pallet binder Manufacturer: Born -Pallet film wrapper: Manufacturer: Robopac -Pallet labeling Manufacturer: Weber Marking Systems Credpsvu Tthofx Akceb Additional title: Returnable glass bottle filling line Capacity: 30000 bottles/h Formats: 0,33 L Vichy, 0,33 L Ale and 0,5 L NRW Features: Depalletizer; new glass remover; empty container inspection; uncorker/unscrewer; unpacker; bottle washing machine; crate washer; empty bottle inspector; bottle filler; 2 closure feeders; bottle level control; labeler; label inspection; packer; palletizer; pallet binder; pallet film wrapper; pallet labeling

Year of construction: 2022, condition: used, Packaging machine for packing PET bottles in plastic crates. The machine is set up in a T-layout. The packing curve and cycle times are freely programmable. The machine packs 0.5 l and 1.0 l PET bottles in crates containing 20 or 9 bottles respectively. Retrofitting to other formats is possible. Additional title: Gripper head packer for packing PET bottles into beverage crates Max. capacity: 24000 bo/h referring to 0.5 l bottles Cycle time: 400 cycles/h Number of packing heads 0.5 l: 3 pcs. Number of packing heads 1.0 l: 5 pcs. Power: 13,7 kVA Voltage: 400 V Frequency: 50 Hz Compressed air: 4.5 m³/h, 6 bar, 3/8" connection Weight: 2900 kg Formats: 0.5 l and 1.0 l PET bottles; 20-bottle crates for 0.5 l (in a 4x5 arrangement); 9-bottle crates for 1.0 l (in a 3x3 arrangement) Running direction: Longitudinal run for 20-litre crates; transverse run for 9-litre crates Operation / Control: Simatic S7 Material: Base frame, attachments, control cabinet and conveyors made of stainless steel 1.4301 (AISI 304) Credpfxjxykv To Akcsb Position: T-formation Base construction: on base frame with height-adjustable dome feet Features: Gripper head carriers, gripper heads, light barriers, bottle table, bottle guide plates, bottle completeness check, vibrators, frequency-controlled bottle transport, machine safety doors, touch panel with user guidance, control cabinet

Year of construction: 2001, condition: used, PET bottle air conveyor over 2 floors, used for 0.5 l, 1.0 l and 1.5 l bottles. Length approx. 50 m. Our team at VBW Asset Trade will be happy to answer your questions. Send us an inquiry or simply give us a call! Additional title: PET bottle conveyor system Capacity: 24000 b/h Formats: 0,5, 1,0 l und 1,5 l PET-bottles Material: mainly stainless steel Position: free-standing on the floor / suspended from the ceiling Crodpfx Ajx T Amgjkcjb Features: Bottle transport channel with bottle guides, with 2 x 360° and additional curves, with a 15° incline and horizontal run, 5 frequency-controlled blower motors

Condition: used, machine/vehicle number: LC426, Used Bottling Line KRONES for Glass Bottles up to 20000 bph Introduction to the Bottling Line KRONES Initially, the used KRONES bottling line for glass bottles is highly sought after in industrial settings due to its reliability and efficiency. Comprising a range of top-tier components, the Complete Bottling Line KRONES ensures seamless performance, effectively meeting the stringent demands of high-volume production. Main Components Firstly, the KRONES K-131-669 filling monoblock, manufactured in 2016, stands as the centerpiece of the Complete Bottling Line KRONES. Capable of handling a remarkable 20,000 bottles per hour, it is complemented by the 1998 KRONES 472-072 depalletizer and the 2000 Gronemeyer RINSER 8983-400-4. Consequently, this collective setup facilitates a smooth and uninterrupted workflow from bottle unloading to the filling process in the Complete Bottling Line KRONES. Quality Control of the Used Bottling Line KRONES Maintaining product quality is paramount in any bottling operation. Therefore, the 1999 KRONES CHECKMAT inspector plays a pivotal role in this regard in the Complete Bottling Line KRONES. With advanced functionalities encompassing not only level control but also meticulous label inspection, it ensures that every product meets the desired standards. Furthermore, the 2000 ACI TA20 2 AE bottle dryer guarantees that bottles are impeccably prepared for subsequent labeling and packaging stages, effectively eliminating any potential issues that may arise from moisture. Labeling and Packaging Efficient labeling and packaging are essential components of the KRONES bottling line. Consequently, the 1999 KRONES STARTMATIC K-080-669 excels in these areas. With precise label application capabilities, coupled with the ability to print directly onto glass bottles, it not only streamlines operations but also elevates brand presentation in the Used bottling line KRONES for glass bottles up to 20000 bph. Complementing this is the 1999 SMI SMI/7507 case packer and the 1997 FRANPACK Typ 121971214 pallet wrapper, ensuring that products are securely packaged and ready for distribution. Operational Status and Specifications The KRONES bottling line is in flawless working condition, and meets the demands of modern production environments. With a remarkable throughput of 20,000 bottles per hour, the line promises to enhance operational efficiency while maintaining product quality. Specifically designed for glass containers and primarily catering to beer production, it guarantees precise and consistent fills, ultimately resulting in superior product quality and customer satisfaction. In summary, the KRONES bottling line represents a sound investment for businesses seeking to optimize their bottling operations. With its robust construction, cutting-edge features, and proven track record, it is poised to deliver exceptional performance and elevate production standards to new heights. Crsdpfevgvwmsx Akcsb

Condition: used, Year of construction: 2006, operating hours: 68,702 h, machine/vehicle number: LC624, Used KRONES water bottling line - 32.000 BPHTechnical Specifications & Performance DataThis complete used bottling line is engineered for high-efficiency PET bottle handling and beverage production. Manufactured by Krones in 2006, it delivers reliable performance for industrial packaging operations at scale. The line integrates blow molding, filling, labeling, coding, shrink wrapping, handle application, palletizing, and pallet labeling, creating a robust end-to-end production solution suitable for second hand markets seeking dependable uptime and consistent output quality.Production speed: up to 32,000 bottles per hourBottle formats: Compatible with 0.5L and 1.5L bottle formatsContainers: Designed for PET bottle handlingManufacturer (core equipment): KronesYear of manufacture (core line): 2006Operating hours recorded: 68702Control platform: Siemens PLCsFilling control: Electronically controlled with flow switches (volumetric)Key models and modules:Krones Contiform S20 blow molder (2006)Krones Volumetic filler (2006)Krones capper (2006)Krones Checkmat bottle inspector (2006)Krones SynCo bottle conveyor system (2006)Krones Etima labeling machine (2006)Markem Smart Lase C350 laser coder (2015)Ocme Vega N70/2 shrink wrapperComag/Decimo HM 100/2 handle applicator (2006)Ocme Pegasus M400 palletizer (2006)Bema Silkworn Turbo pallet stretch wrapper (2006)Eidos 7P6ERLP pallet labeler (2020)M. Tanner AG/Prologic preform hopper (2018)M. Tanner AG preform unscrambler (2006)Gassner cap hopper (2006)Cryotech International nitrogen doserEuropool pack conveyorAdvanced Automation & Control SystemsThe line is equipped with Siemens PLC-based automation for coordinated control across blow molding, filling, labeling, and end-of-line operations. The filler uses electronically controlled flow switches to ensure accurate volumetric dosing and consistent fill levels at high speeds. Centralized controls, synchronized conveyors, and integrated inspection enhance efficiency while minimizing downtime and changeover complexity.Siemens PLC architecture across the production lineVolumetric filling with electronic flow controlIntegrated inspection via Krones CheckmatCoordinated conveyor logic with Krones SynCoLaser coding by Markem Smart Lase C350Production Line Integration CapabilitiesThis production line integrates seamlessly from preform handling through pallet labeling. The Krones SynCo and Europool conveyor systems ensure smooth transfers between modules, while the shrink wrapper, handle applicator, palletizer, stretch wrapper, and pallet labeler complete a fully automated packaging and logistics flow.Inline operation from blow molder to pallet labelerFormat compatibility: 0.5L and 1.5L PET... Cedpfx Aksy Icpqocjrb

Condition: used, machine/vehicle number: LC579, Used Isobaric Complete Bottling Line for Still and Sparkling Wine up to 4500 bph This complete bottling line has been designed and configured to provide a high-quality, consistent filling process for both still and sparkling wines. Built around an isobaric tribloc system, it integrates rinsing, filling, and capping functions in a continuous flow, ensuring excellent efficiency while maintaining product integrity. The line is currently set up for still wines at an output of 4,500 bottles per hour and for sparkling wines at 3,000 bottles per hour. It is already technically prepared for sparkling wine production and only requires the addition of a mushroom corker, a capsule applicator for spumante hoods, and a heating tunnel if needed. The system is equipped with dedicated conveyors, a centralized lubrication system, and separate control panels for conveyor management, enabling straightforward maintenance and integration into existing plant automation. The entire layout follows a linear configuration, optimised for space utilisation and ensuring smooth product transfer between each stage without unnecessary accumulation points. Crodpfx Asw Imp Hekcjb Bottling Process and Core Machinery At the start of the line, empty bottles are automatically fed into the system via a depalletizer. This equipment gently lifts and transfers the bottles onto the feeding table while maintaining their integrity. Bottles are then directed to the tribloc system, where three key operations are performed in sequence: rinsing, filling, and capping. The isobaric filling technology ensures precise fill levels and consistent carbonation retention for sparkling wines, while also being perfectly suited for still wine bottling. The filling valves are designed to minimise oxygen pickup, which is crucial for preserving the wine’s sensory qualities and shelf life. The rinser operates with clean water or a sanitising solution, ensuring bottles are free from contaminants prior to filling. The capping turret, currently configured for still wine closures, applies either BVS screw caps or traditional corks, depending on the selected format. A dosing unit for gum arabic is integrated into the line. This system allows for precise addition of stabilising agents post-filling, which helps maintain wine clarity and prevent precipitation during storage. A dedicated steam generator (vapouriser) is included for both line sanitisation and, when required, pre-heating applications. Prior to filling, a microfiltration unit is positioned to ensure that the product entering the tribloc meets the desired microbiological standards. This step is essential for ensuring product stability and quality without the need for excessive chemical preservatives. Downstream, bottles are transferred to the labelling station. While the labelling unit is supplied by a third-party manufacturer, it is elect...

Condition: reconditioned (used), functionality: fully functional, operating pressure: 140 bar, empty load weight: 94 kg, input voltage: 230 V, warranty duration: 6 months, temperature: 155 °C, KARCHER HDS 558 C HOT WATER WASHER This device features new accessories, including a German R+M gun, stainless steel lance, steel braided hose, and a 25° power nozzle. A durable brass head with new ceramic pistons and seals guarantees long and trouble-free operation. A highly efficient single-phase motor ensures stable operation even during prolonged use. With operating parameters of 140 bar and 550 l/h, the machine can be effectively used for heavy-duty work in construction, logistics, and agriculture. Each device we offer has individually taken photos; you are buying exactly what you see. TECHNICAL DATA: Model: HDS 558 C Power supply (V): 230 Capacity (l/h): 290-550 Pressure (bar): 30-140 Maximum temperature (°C): 80/155 Connected power (kW): 3.2 Fuel tank (l): 16 Fuel consumption (kg/h): 3 Weight (kg): 94 Dimensions (L x W x H) (mm): 940 x 600 x 740 EQUIPMENT: NEW durable pressure gun from the German brand R+M NEW stainless steel pressure lance NEW reinforced 10m steel braided pressure hose Cedpfoy Nip Tjx Akcorb NEW 25° power nozzle WATER FILTER AND GEKA CLAW COUPLINGS - FREE KEY FEATURES: Open oil system - no operating time limits Built-in chemical tank allows for dosing of cleaning fluid directly through the machine Very clear and intuitive control panel Simple design and easy access to individual components under the housing make The machine is user-friendly and easy to service. The RM110 water softener tank prevents corrosion and scale buildup inside the heating coil and other pipes.

Condition: good (used), Year of construction: 2007, Connected load: 75 kW Control system: Siemens Simatic Panel Touch Cleaning agent: aqueous cleaners Filling volume: 1,070 l Loading/unloading via roller conveyor system, approx. 400 mm, roller width 600 mm Crsdpfey H H R Aox Akcjb Feed belt, discharge belt with cooling section, unloading station with transfer unit Removal / inspection station for oil separator Transport and loading can be organised across Europe for an additional charge upon request. Prices plus VAT Inspection possible by appointment. Please contact us – our team will be happy to assist you. Machinery purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, MACHINE TOOLS, AND MORE. Do you need a high-quality but affordable machine for your production? Or are you looking to sell your machine? For further information or to get in touch, please reach us via the contact form.

Condition: reconditioned (used), functionality: fully functional, operating pressure: 170 bar, empty load weight: 121 kg, input voltage: 400 V, warranty duration: 6 months, temperature: 90 °C, KARCHER HDS 9/17-4C HOT WATER WASHER This device features new accessories, including a German R+M gun, stainless steel lance, steel braided hose, and a 25° power nozzle. A durable brass head with new ceramic pistons and seals guarantees long and trouble-free operation. A highly efficient three-phase motor ensures stable operation even during prolonged use. With operating parameters of 170 bar and 900 l/h, the machine can be effectively used for heavy-duty work in construction, logistics, and agriculture. Each device we offer has individually taken photos; you are buying exactly what you see. TECHNICAL DATA: Power supply voltage [V]: 400 ~ 3-phase Discharge capacity [l/h]: 900 Operating pressure [bar]: 170 Cjdjy Na Duspfx Akcsrb Max. Heating temperature [°C]: 90 Connected power [kW]: 6.5 Fuel tank [l]: 25 Hose length [m]: 10 Weight [kg]: 121 EQUIPMENT: NEW durable pressure gun from the German brand R+M NEW stainless steel pressure lance NEW reinforced 10m steel braided pressure hose NEW 25° power nozzle GEKa water filter and claw couplings - FREE KEY FEATURES: Open oil system - no operating time limits Built-in chemical tank allows for dispensing cleaning fluid directly through the machine Very clear and intuitive control panel Simple design and easy access to individual components under the housing make the machine user-friendly and easy to service RM110 water softener tank prevents corrosion and scale accumulation inside the heating coil and other pipes.

Condition: used, Year of construction: 2019, Washing plant by "HIGHTECH", model "LU 200 A" Crodpfx Aksy I A Adscob

Year of construction: 2006, condition: ready for operation (used), A complete bottle washing and filling line is available. 1) Rotary rinsing machine Augenstein RI 1600/48/6, year of manufacture: 2006. 2) Filling machine Deckert Rudolf IFM 420-2, year of manufacture: 2003. 3) Bottle unscrambler Pace Packaging M-400 PR SSD, year of manufacture: 2004. 4) Bottle capping machine Alcoa 6208/360, year of manufacture: 2003. Including cap feeder Augenstein, year of manufacture: 2008. 5) Packaging and labeling line Sleever MSA 5120 LS4, year of manufacture: 2013, labels: shrink sleeve labels, steam consumption: 150kg/h. 6) Weighing and metal detector unit Mettler Toledo XS3, year of manufacture: 2008. Line capacity: 9000bottles/h, bottle volume: 150ml, filling volume: approx. 150cm³, max. bottle diameter: 48.9mm, bottle height: 115.5mm, filling medium density: 1335kg/m³. Documentation available. An on-site inspection is possible. Crodpfsy I Ac Dex Akcob

Condition: ready for operation (used), Year of construction: 1999, Complete bottling and jerrycan packaging line up to 10 liters, consisting of: 4-nozzle volumetric filler (last used for filling containers from 1 to 5 liters) Crjdpoy Ewnpsfx Akcjb Semi-automatic pneumatic capper DIDAC MENDEZ labeller with 2 heads and a maximum label height of 160mm Brand: J. ESQUERDA Model: LL-H/10.000/BS Year: 1999

Condition: good (used), Production capacity of up to 4000 b/h (depending on the format) For formats between 0,25lts up to 3lts Composed by: • Oven for heating the preforms composed of 6 heating modules with 8 infrared lamps each • Preform transfer Wheel • Two-stage compressed air blowing body, low pressure pre-blowing and subsequent high pressure blowing. • Bottle transfer Wheel • Delivered with pallet turner. Cjdpewcggvjfx Akcorb DOCUMENTATION AVAILABLE

Condition: reconditioned (used), functionality: fully functional, operating pressure: 180 bar, empty load weight: 130 kg, input voltage: 400 V, warranty duration: 6 months, temperature: 80 °C, KARCHER HDS 850-4M HOT WATER WASHER This device features new accessories, including a German R+M gun, stainless steel lance, steel braided hose, and a 25° power nozzle. A durable brass head with new ceramic pistons and seals guarantees long and trouble-free operation. A highly efficient three-phase motor ensures stable operation even during prolonged use. With operating parameters of 180 bar and 900 l/h, the machine can be effectively used for heavy-duty work in construction, logistics, and agriculture. Each device we offer has individually taken photos; you buy exactly what you see. Csdsy Iyxcepfx Akcjrb TECHNICAL DATA: Power supply voltage [V]: 400 ~ 3-phase Discharge capacity [l/h]: 900 Operating pressure [bar]: 180 Max. Heating temperature [°C]: 80 Connection power [kW]: 6.5 Detergent tank [l]: 20 Hose length [m]: 10 Weight [kg]: 130 EQUIPMENT: NEW durable pressure gun from the German brand R+M NEW stainless steel pressure lance NEW reinforced 10m steel braided pressure hose NEW 25° power nozzle WATER FILTER AND GEKA CLAW COUPLINGS - FREE KEY FEATURES: Open oil system - no operating time limits Built-in detergent tank allows for dosing of cleaning fluid directly through the machine Very clear and intuitive control panel Simple design and easy access to individual components under the housing make the machine user-friendly and easy to service Water softener tank RM110 prevents corrosion and scale build-up inside the heating coil and other pipes.

Year of construction: 2007, condition: excellent (used), Inline can / jar washer & dryer Completely stainless steel Container Max 180mm wide & 250 hight as-is or Cjdpfx Akeh Eazzocorb tested and adjusted to costomer needs

Year of construction: 2013, condition: used, We offer you a used PET bottle crusher of the manufacturer BOREMA, type R-1200 F, year of construction 2013, for residual emptying, deaeration and pre-compaction of the fed PET bottles, from 0.3 up to 2.5 l content. The machine has a chassis and can be moved into and out of the feed chute of your baler. The machine has a throughput capacity of approx. 85,000 bottles/h, corresponding to approx. 3t/h. We have the following technical information: Manufacturer: BOREMA Umwelttecjhnik AG Type: R-1200 F (with trolley for retracting and extending) Year of manufacture: 2013 Drive power: 11 kW Connected load: 15 kW Rated current: 32 A Back-up fuse: 40 A Type of construction: Continuous system Function: Double rotor press system Rotor pretension pneumatic: approx. 16t Cedpju Thpnofx Akcorb Overload protection: by anti-blocking system Input material: PET disposable and returnable empty bottles 0.3 to 2.5 L capacity Input material: HDPE bottles and canisters up to 3 l capacity Throughput capacity: approx. 3 t/hour, corresponding to approx. 85,000 bottles/hour, depending on size Required compressed air output: G1/2", 8 bar, 40 l/min. Compression ratio: 1:3 Flange dimensions inside: 972 x 1220 mm Feed opening: 565 x 1280mm Weight: approx. 2500kg Possible applications: Due to the chassis, the PET flattener can be moved into the feed chute of your baler as required, thus ensuring residual emptying, venting and pre-compaction of the fed bottles and canisters. When the material is changed, the PET flattener is simply moved out of the feed chute again and paper, cardboard, film, etc. can now be pressed further without using the flattener. Process of the BOREMA PET crusher: The plastic packages are drawn in by two rotating shafts. One of the rotating shafts is pneumatically pretensioned by two air bellows and presses the PET bottles with 16 t of pressure against the second rotating shaft. In the process, the closed plastic bottle is squeezed together, caused to burst and vented. Residual liquids run out and the material falls into the baler in a precompressed state. When impurities are introduced, the pneumatically pre-tensioned shaft deflects to the side and the impurities are channeled through. Significant advantages compared to conventional PET perforators with punching mandrels or knives: The BOREMA process is much more efficient and less subject to wear than conventional PET perforators with punching mandrels or knives. The biggest advantage is that any foreign matter such as metal parts, stones, bottles with frozen contents and pieces of wood are passed through the pneumatically deflecting rotor shaft without stopping the operation of the system or causing any major damage. With conventional perforators, mandrels or blades sometimes break off or become so jammed with the interfering material that the plant has to be shut down and repaired at great expense. Comments: The crusher is in good condition, was dismantled from the running operation, stored, is available at short notice and after assembly immediately ready for use. The documentation (manual, CE, electrical/hydraulic circuit diagram) is complete. An inspection is possible by arrangement. The technical information is taken from sales brochures, the operating instructions or other information provided by the manufacturer. We accept no liability for incomplete or incorrect data and informations.

Condition: used, Year of construction: 2000, Packing machine for containers such as bottles (beer, wine, beverages, oils) or cans into cardboard group packaging. Crjdpoywclwjfx Akceb The containers are grouped, then wrapped with a cardboard blank and glued into a group package. Manufacturer: SOTEMAPACK Model: WRAP-AROUND Year of manufacture: 2000 Capacity: up to 720 packs/hour (12 packs/min) Control: S7-300 Original technical documentation. Technical condition: used machine, operational at disconnection, condition as shown in the photos.

Condition: used, Automatic bottle capping machine for plastic caps. The machine features stepless speed and output adjustment. Number of capping heads: 8 pcs Capacity: 6,000 bph Total power: 4.0 kW Cedsxz Ehmepfx Akcerb Weight: 1,500 kg Used machine