Used Biscuit Production Line for sale (22,869)

Condition: good (used), Year of construction: 1983, Continuous Butter Making Machine (CBM). Brand : Simon Freres Type : MD1119 C Year : 1983 Capacity : 2.000 kg per hour butter output Input : ± 4,000 liters of cream 38-42% fat With accessories: - Water and culture dosing system - Vacuum pump - Controls Dksdpfxeydnzps Ac Njh - Piping 1 x Butter Silo Butter capacity: 2.000 kg With 2x Butter Pumps: Waukesha type: 130U1 Motor: 5.5 kW CIP return pump Description: Butter production line. Still located at the factory in Belgium. Operating principle of the production line: Continuous butter making machine. A cream pump transports the cream from the buffer tanks to the CBM. The CBM is capable of converting 4.000 liters of cream into 2.000 kg of butter. It also features a recirculation system for cooling and injecting buttermilk, a vacuum section, and injection pumps for culture and brine. Furthermore, it includes a buttermilk cooler, buttermilk and CIP pumps, a collection tank, valves, piping, and all the necessary controls. After the butter is made in the CBM, it is pumped into the Egli butter silo, which includes two Waukesha outlet pumps to transport the butter to the filling machines.

Condition: excellent (used), Marinus Machines V&G 400 Series, Through Feed End Matching Machine suitable for fixed or random lengths as needed Maximum working length up to 6m, Minimum working length: 500m/m Total Power: Appr: 32kw, Tooling included. 400v 50hZ Dksdpfx Acoydii Io Neh 20 pieces per minute possible depending on length. PLC Controls. Complete Safety Enclosure.

Condition: ready for operation (used), functionality: fully functional, Fully equipped plastic processing line, including: - Main extruder: BA92 NOVEL - Co-extruder: ROYAL MACHINE, model 253-070-000, mounted on a support column. The line consists of several components. - Suitable for co-extrusion applications – e.g., multi-layer profiles, strips, technical components TECHNICAL DATA – BA92 Extruder (NOVEL) - Screw: Ø92 mm, length 24 L/D - Type: B60S4; VB92-24-005 - Speed range: 3.3 ÷ 33 rpm - Barrel: 34CrAlNi7 steel, hardness 1000 HV - Gearbox: ratio 1:63.4 R - Thrust bearing: 1,170,000 N - Heating zones: 6 - Cooling zones: 4 - Motor: 63.8 kW, DC, 210–2100 rpm - Venting: 2.2 kW pump, 36 m³/h, vacuum 700 Hg - Feeder: 1.2 kW DC motor TECHNICAL DATA – ROYAL MACHINE Co-extruder - Screw: Ø1¾", length 21D, compression ratio 2:1, twin-flighted - Barrel material: AISI 4140 steel (bimetallic barrel 2” O.D. x 1¼” I.D.) - Gearbox: ROSSI RCI 80 U03A, ratio 1:16.4 + belt 1:1.65 (total ratio 1:27) Dkodoyc R U Aopfx Ac Nsh - Drive belt: type 3VX560, 3 pcs. - Thrust bearing: load capacity 20,000 kg - Heating: 6.9 kW, 3+1 heaters - Cooling: 1/16 HP, 3 fans - Motor: POWERTEC Frame 184 TC, 5 HP, 0–1750 rpm Condition: complete, fully operational line, ready for operation Application: plastic processing in co-extrusion processes Technical documentation available upon request. Includes additional spare parts.

Year of construction: 2004, condition: ready for operation (used), functionality: fully functional, Each line comprises: • Main extruder: BA105 AMUT, year of manufacture 2004 • Single-screw co-extruder: ROYAL EUROPA (Canada), year of manufacture 2005 • Pneumatic raw material conveying system • Cooling table with tank (AMUT NERG10, 10 m), year 2004 • Puller-saw (TP25, 7 m), year 2004 • Run-out table _____ TECHNICAL DATA – BA105 AMUT Extruder • Screw: Ø105 mm, length 24 L/D • Type: PCD90WEF; VBM105-24-007 • Speed range: 2.66 ÷ 26.6 • Screw material: alloy steel 41CrAlMo7, hardness 1000 HV • Gearbox: ratio 1:65.6 R • Thrust bearing: 1,400,000 N • Barrel heaters: 42.92 kW (7 heating zones, 4 cooling zones) • Main motor: 60 kW, 1750 rpm • Degassing: pump 2.2 kW, 30 m³/h, vacuum 700 Hg _____ TECHNICAL DATA – ROYAL EUROPA Co-extruder • Type: 253-100-000, column-mounted • Screw: Ø1¾", length 21D, compression ratio 2:1, double-flight • Screw and barrel material: AISI 4140 steel • Bimetallic barrel: Ø3" O.D. / Ø1¾" I.D. • Screw hardness: 50–52 RC Gearbox: • Type: ROSSI RCI 100 U03A Dkjdpjyc R Aasfx Ac Noh • Ratio: 1:15.2 + belt 1:1.65 (overall 1:25) • Belt type: 3VX600 (4 pcs) Heating and cooling: • Heating power: 8.9 kW • Heaters: 4+1 • Cooling: 1/16 HP, 4 fans Motor: • POWERTEC Frame 215 TC • Power: 10 HP • Speed range: 0–1750 rpm Technical condition: Both lines complete and fully operational Ready for profile production using multilayer co-extrusion Possible to sell one or both lines – as per buyer’s requirements On-site presentation available. Documentation and photos available. It is possible to purchase a single line for €100,000.00.

Condition: ready for operation (used), Complete Veneer production line. Capacity produced veneer: 8 to 10 m3 per hour Dimension veneer sheets: Length 2.62 m, Minimum width 0.5 meter Max diameter: 62 cm Max log length: 6 meter ( Longer logs if re-building the log intake ) Main parts: - Logintake with debarker and butt-end reducer - Veneer peeling system - Dryer for veneer - Conveyor system for quality sorting with stacking units Djdpfx Astryf Ioc Nekh - Chippers for chipping off-cuts

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, The line includes: - Main extruder: BA130 (Cobra), year of manufacture 2008 - Co-extruder: CM65, year of manufacture 2008, sold for parts - Embosser, cooling tank, nailer, puller, perforator, guillotine – all year of manufacture 1996 TECHNICAL DATA – BA130 Extruder (Cobra) - Main screw: Ø130 mm, length 26 L/D - Center distance: 1050 mm - Screw material: XALOY 41CrAlMo7, hardness 1000 HV - Gearbox: 1:31:7 R - Thrust bearing: 2 020 000 N - Barrel heaters: 74.6 kW (7 heating zones, 6 cooling zones) Dksdpfx Acjyc Rtxo Noh - Main motor: 205 kW, 1460 rpm - Degassing: pump 4 kW, 100 m³/h, vacuum 700 Hg - Feeders: 2x motor 2.2 kW, ratio 1:25:4 R, screw speed 112 rpm Technical condition: The line is operational and ready for production The configuration allows for the complete siding production process – from granulate to finished profile Individual price quotation and on-site machine demonstration available.

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, input voltage: 380 V, The item for auction is a bread production line consisting of: - IBIS dough divider - rounder for dough pieces - 8-row intermediate proofer The machines are in continuous operation. Dksdpfxoyc N Hqs Ac Neh Price is quoted net. The auction does not include the tilting device, which is also for sale. For more information, call 504 030 291 I have more bakery machines available. Please see my other listings.

Condition: excellent (used), Soup production line The installation has been used very little Ready for operation Dedpfeyc E Rfsx Ac Nokh

Condition: excellent (used), Mayonnaise production line. The machine is ready for operation. Dodpfx Ajyc E Nzec Njkh

Condition: like new (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: 271901, For sale: sawmill line for sawing timber, intended for processing logs with a length from 2 to 3 meters. The machine is in practically new condition – after commissioning and testing, ready for operation. Dedpfx Aoyc Dhvec Nskh For more information, please contact me by phone. Feel free to get in touch.

Condition: good (used), Offer consisting of: Duplo DC 10/60 collator, Duplo DBM 500, Duplo DBM-500T Dksdpfx Acjx Ttf Ts Nsh

Condition: good (used), Year of construction: 2010, Weinig Conturex C126 CNC Window production machine Description; Year of construction: 2010 Working width 40-260mm Working heigth 25-150mm Powergrip clamping table Table loading length single table 4 x 2280mm Workpiece length single table cycle 220-2700mm Table loading length double table (combined) 2 x 4630mm Workpiece length double table cycle without follow up 220-5000mm Workpiece length double table cycle with follow up 5000-6000mm Fully new PC & Software 2025 Full description on request Available approx. summer 2026 (Despite our great care all changes, mistakes in technical data, prices and all information is subject to (typing) errors. No guarantee on printed data! Availability subject to prior sales). (Alle Änderungen und Irrtümer in den technischen Daten, Angaben und Preisen vorbehalten! Keine Garantie auf gedruckte Daten!. Verfügbarkeit vorbehaltlich Zwischenverkauf). Prices excl. advertisement cost MachineSeeker / Preise exkl. Inserierungskosten MaschinenSucher Dksdpfx Acsx Tq I Ej Njh Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: used, functionality: unexamined, Bottled water production line for PET bottles in the following formats: 0.5 L, 1.5 L, and 2.0 L. Line output: approx. 16,000 bph The line includes the following machines: 1) KHS triblock bottling machine, filler type 45-80-10, year 1998 (approx. 20,000 bph), control: S7-200 - KHS bottle washer, Innoclean FR-EM 45 - KHS filler, Innofill EV 80 - ALCOA KUPI 10/540 capper (max. 25,000 bph) 2) KRONES Contiroll 745 labeller, year 2000 (16,000 bph), control: S7-300 3) Shrink packer with tunnel – ZVT PSP 032 S, year 1998 4) Bottle liquid level inspection device – METEC Promecon 2000 5) Set of KHS Innoline slat conveyors – several dozen linear metres, including curves and dividers Dkedpfewv Trlox Ac Njh The machines are used, regularly serviced, and require a technical inspection before recommissioning. Currently dismantled and stored in containers, ready for transport. The line is prepared for reassembly – each element is marked with a unique identification number.

Condition: new, Year of construction: 2026, Industrial Edge Banding Machine Dodpfx Aceyb Rxls Njkh The design of the edge banding machine ensures perfect application of 35 mm edge band tape, and supports workpiece thicknesses from 7.5 to 60 mm, covering a wide range of edge banding needs including situations such as missing corners or open spaces. It is also engineered for door panel structures with special configurations, allowing edge banding without requiring additional processing steps. Total power: 34.5 kW Minimum workpiece length: >= 120 mm Minimum workpiece width: >= 35 mm Workpiece thickness: 7.7 – 60 mm Edge band thickness: 0.4 – 3 mm Feed speed: 18/22/26 m/min Minimum workpiece dimensions: 300 x 35 mm Weight: 5130 kg Dimensions: 10,000 x 1,050 x 1,930 mm 6-sided CNC Drilling Center – ND612DTL The ND612CTL is an enhanced model capable of 6-side drilling, front/rear grooving, front milling, side milling, and side grooving. It also processes special features such as cable channels, Lamello joints, LogiClip connectors, and upper/lower hinge mortises, which meet a variety of process requirements while offering maximum flexibility for individual batch production. The machine is equipped with an upper and lower drilling block, an ATC8 main spindle with 5.5 kW power, and a 2+8 tool changer magazine.

Year of construction: 1980, condition: ready for operation (used), Fully Integrated Concentrate Factory (Tomato Paste 450 Ton/day – Mango & Guava) Manufacturer: Ing. Rossi Catteli – Model Annetto T15 – Parma, Italy Djdpjxdn R Aofx Ac Njkh ⚙️ Capacity: 450 tons of Tomato/day 🛠️ Equipment Model: 1980 ✅ Fully refurbished in 2024 (Electrical + Mechanical – Like New) 🔸 Production Line Includes: Receiving & sorting unit - Hammer + Mono Crusher (12 tons/hour) - 3 Pulper finishers- 14 tube pre-heater HB- Storage tanks- Triple-effect evaporator including 3 pumps - Cooling Condenser - Cooling tower 45 WATT - All pumps and motors European brand - Full PLC automatic control- German automatic pneumatic valves - Steam Boiler 4.5 Ton Line located in Egypt . Evaporator can be sold separately

Condition: like new (used), Year of construction: 2019, operating hours: 180 h, functionality: fully functional, total length: 8,000 mm, total width: 1,200 mm, total height: 1,300 mm, type of input current: AC, input voltage: 400 V, power: 10 kW (13.60 HP), SOEST Universal Surface Line for oiling, staining, lye treatment, patination, etc. Primarily intended for parquet surfaces up to 40 cm workpiece width. 1) Roller Machine RCR-400-L Reverse, for applying and removing surface products such as oils, stains, lacquers, etc. 2) Distributor Machine VP-400-1B-2P-2B with one brush, two pad holders, and an additional two brushes, for distributing, working in, or patinating surface media in the pores and/or also for removing, distributing, and working in depending on the desired surface effects. 3) Accessories include two spare application rollers, a material pump (brand new, never used), four replacement brushes, various distributor pads, and a pneumatic brush cleaning machine. Dsdpfx Asyaiafsc Njkh This complete surface finishing line is built for professional industrial use and is configured with a full set of equipment. A considerable amount of accessories for the system, such as extra rollers and cleaning machines, is also included (see photos!). Very robust construction, all motors frequency-controlled (Siemens). Speeds are steplessly adjustable for both forward and reverse operation. Maximum workpiece width is approx. 410 mm. The system is in very good condition, with little use—only approx. 180 operating hours—so it can be described as as-new. This surface processing line was only used as a backup line in parquet production and only for specific surface techniques, which explains the low operating hours (used sporadically from 2019 to 2022). In 2023, our company downsized and the system has been stored ever since or is immediately available, and therefore remains in nearly brand-new condition! This system is no longer used in our facility and is therefore being sold. The new price for this line was approx. €87,000 in 2019; the current selling price is negotiable! Inspection of this surface line is possible by appointment. If required, we can also offer 10 drying rack trolleys for sale with this system. (The YouTube video serves only as an example video of a similar system configuration!)

Condition: ready for operation (used), Year of construction: 2000, Line for the production of round tubes and closed profiles from black and stainless steel, with diameters ranging from 20.0 mm to 70.0 mm and wall thicknesses from 0.5 mm to 3.5 mm. Different diameter ranges are possible by manufacturing a suitable set of rollers. The tube or closed profile is formed by rolling the appropriately sized and thick steel strip using a roller set, then joined together by TIG welding. During production, the following processing steps are performed: a) grinding the weld seam b) calibration c) straightening d) and cutting to length The finished product, the 'raw tube', can be further processed to achieve the desired surface structure. Two main finishing processes are used: a) wet grinding using abrasive belts b) and/or dry polishing using polishing wheels and compounds. CONSTRUCTION The tube/profiling line features automatic TIG welding by SAF: a) Tricathode NERTAMATIC 300 TR TIG inverter, 2 units b) Tricathode NETRINOX TH 500 TIG inverter, 1 unit c) Welding of 0.5 – 1.5 mm wall thickness products using E16 torch d) Welding of 1.5 – 3.5 mm wall thickness products using E25 torch Dkedpfxsxmiirj Ac Nsh e) RETRISAF cooling system 1.1 Steel strip coil support and decoiler 1.2 Roll forming stations a) entry station b) preliminary forming station c) main forming station 1.3 Welding segment – triple-electrode TIG welding heads with inert gas (argon) shielding 1.4 Weld seam cleaning station 1.5 Calibration station 1.6 Straightening station 1.7 Flying saw – product cutting to specified length Additional line components: 1.8 Bossi 4-head tube grinder Type: CPS 400x3000/4 Belt: 3000x150 mm 1.9 Bossi 2-head tube polisher Type: CP 400-2U

Year of construction: 1998, condition: used, Technical details: profile width: 50 mm work height max.: 950 mm interface: RS 232 Pinout Window profile processing machine for materials such as plastic, aluminum and wooden windows in a continuous process. The materials are conveyed by a pneumatic transport and clamping system. The system consists of two work stations (machines), an electrical control cabinet, and a control panel and transport units. As well as columns with transport system vibrator, chip transport unit and column with receipt printer. Our photos are first taken from the location and then further pictures are how the plant is stored in our stock ready for transport. Workstation no. 1 (machine 1): -sawing station with saw blade Ø 400 x 4,5mm -drilling unit with clamping cartridge (vertical upwards) -drilling unit with clamping cartridge (hotizontal) -Boring with clamping cartridge (vertical down) -twin drilling unit with clamping cartridge (vertical down) -45° drilling unit with clamping cartridge (upwards) Working station no. 2 (machine 2): -drilling unit with clamping cartridge (vertical upwards) -milling spindle horizontal with 11 side milling cutters -Drilling unit with clamping cartridge (vertical down) -Drilling unit with clamping cartridge (vertical upwards) -Drilling unit with clamping cartridge horizontal Dkjdpju Ibuwofx Ac Neh 2 transport units: motor driven -LxWxH: 5.650 x 2.400 x 1.000mm -track width 1.980mm 2 pieces transport units: motor driven -LxWxH: 2.150 x 2.750 x 1.050mm -track width 2.300mm *

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 13688, Year of construction: 2012, empty load weight: 4,990 kg, Fully automated, horizontal production line for IGUs and spacer frames! Production capacity of 1,200 units per shift! TECHNICAL DETAILS Production capacity: 150 pcs/h MACHINE DETAILS Electrical data Voltage: 480 VAC Frequency: 50/60 Hz Phases: 3 Maximum motor capacity: 2 A Djdox Trlropfx Ac Nskh Short-circuit current: 5,000 A Power: 142 kVA Machine weight: 4,990 kg EQUIPMENT GED Intercept Ultra / Thin frame machine i-3 – CE version Warm-edge spacer production system Production of Intercept ULTRA stainless steel, ThinPlate or BlackLine

Condition: used, Year of construction: 1999, functionality: fully functional, Complete line consisting of: 1. Angelo Cremona Veneer Peeler – detailed description available below 2. Angelo Cremona Dryer – description and photos available in the listings 3. CMP Press – description and photos available in the listings 4. Imeas Sander – description and photos available in the listings 5. Raute Composer – description and photos available in the listings PEELING PLANT Comprising of: Centering Loader 1. Model CE08 2. Angelo Cremona 3. Positions logs for loading onto the veneer peeler 4. Power supply: 400Vac/50Hz – 50kW Maximum hydraulic pressure: 100 bar Compressed air consumption: 0 L/min Weight: kg Maximum dimensions: 600x300x400 mm 5. Production capacity: 4 logs per minute Veneer Peeler 1. Model SFH870 2. Angelo Cremona 3. Peels a sheet of wood from the rotation of the log Dksdpfjvm An Esx Ac Nsh 4. Power supply: 400Vac/50Hz – 240kW Maximum hydraulic pressure: 100 bar Compressed air consumption: 10 L/min Maximum dimensions: 600x400x300 mm 5. Production capacity: 50 cubic meters per shift Cutting and Sorting Line 1. Model TSR27 2. Angelo Cremona 3. Transports the peeled ribbon to the guillotine for optimized sheet cutting 4. Power supply: 400Vac/50Hz – 70kW Maximum hydraulic pressure: 100 bar Compressed air consumption: 0 L/min Maximum dimensions: 300x200x200 mm 5. Production capacity: 50 cubic meters per shift Sorting Line and Vacuum Stacker 1. Model LTR27 2. Angelo Cremona 3. Separates and stacks recovered sheets from full-size sheets 4. Power supply: 400Vac/50Hz – 180kW Compressed air consumption: -- Maximum dimensions: 300x1300x500 mm 5. Production capacity: 50 cubic meters per shift

Condition: good (used), functionality: fully functional, Year of construction: 2010, operating hours: 14,500 h, Solid, fully functional Twinmaster 16X+ textile winder. Ideal for large print runs – thanks to automatic straightening and five unwinders, hydraulically regulated material braking guarantees even roll unwinding. The machine is regularly serviced, ready to work immediately. Dksdpfx Acjwnpd Ie Njh

Condition: reconditioned (used), Year of construction: 2007, functionality: fully functional, total length: 2,000 mm, total width: 1,250 mm, total height: 2,000 mm, type of input current: three-phase, input voltage: 400 V, power: 40 kW (54.38 HP), saw blade diameter: 450 mm, workpiece width (max.): 300 mm, workpiece height (max.): 30 mm, air pressure: 6 bar, extraction connection diameter: 200 mm, hone diameter: 125 mm, number of spindles: 2, MARINUS PROMAX - Endmatcher and defect saw. The machine is according to following specifications: - Stable and heavy construction, dimensions LxDxH = 2080x1260x2000 mm. - Continuous feeding system with accurate positioning (servo). - Pneumatic sidepushers for guaranteed square angle. - PLC-steering. - Operating by terminal. - Modem for programming at distance. - 2 servomotors for maximum dynamics. - 2 sawingmotors (3,0 kW). - 2 high-speed millingmotors with inverter (7,5 kW each /200 Hz/n=12.000). - 1 motorgearbox with inverter. - 2 drummotors. - 26 pneumatic cylinders with valves. - 1 luminescence-sensor - 6 inductive-sensors - Bandconveyor for waste, height 1,3 mtr. - Machine completely closed by safety-doors. - Machine according to CE-requirements. Length-measuring system: A lenght-measuring-system displays the total lenght and square meters of the boards on the display during Dkjdpfx Aoq Auhdjc Neh production. Tooling: We can offer tooling (tongue and groove) with disposable knives and 2 crosscutsawblades as an option for the machine. Standard Programming: The machine is equipped with 2 main programs: 1 Endmatching 2 Cutting Both main programs have 2 sub programs: 1. Variable lenghts: defects are cut out, endproducts are of all variable lenghts. 2. Fix lenghts: boards will be produced at a fixlenght, infeedlenght has an oversize of max +200 mm. Cutting out defects is not possible. - Min. Width 60 mm - Max. Width 300 mm - Min. Length 500 mm - Max. Length 6000 mm - Min. Thickness 10 mm - Max. Thickness 30 mm

Condition: good (used), Year of construction: 1998, functionality: fully functional, Paper making machine / production line including stock preparation, paper machine, calander and winder. Screen and press part manufactured by Papcel in 1998 Dsdpfx Ajx Tazzoc Njkh Drying section manufactured by PaMa, refurbished Screen width: 2350 mm Trim width: 2050 mm Capacity: 20 tons / day Grammage range: 80 - 240 g/m2 Product: recycled paper, packaging papers, Schrenz, Medium / Fluting

Condition: used, Line consisting of: No. 1 crimping machine brand Siat, model SM481, usable width cm. 90, usable height cm. 35 no. 1 Conveyor belt useful width cm. 90, useful length cm. 160 nr.1 Rejector Strapac, model SS-80, usable width 80 cm, usable height 50 cm or No. 1 Strapping machine brand Strapex, model Ecopack DE94, usable width cm. 120, usable height cm. 40 no. 1 Conveyor belt useful width cm. 90, useful length cm. 160 Dkedpfex S Nk Ajx Ac Noh no. 1 Automatic stacking machine, usable width cm. 90, usable length cm. 150 Total footprint of the line 750 cm x 150 cm Line codes: 920568 – 920567 -920565 – 920564 – 921003

Condition: used, Year of construction: 2010, functionality: fully functional, machine/vehicle number: 7500099112 / 8500099112, number of previous owners: 2, pressure: 7 bar, type of input current: DC, We are offering this used elumatec VS 750 / EV 850 multi-head welding machine / CNC corner cleaning machine, year of manufacture 2010. Manufacturer: elumatec Model: VS 750 / EV 850 Year: 2010 Condition: used Four-head welding machine Elumatec VS 750, 3.0 m x 3.1 m (maximum welding size) Weld bead limitation: 0.2 - 2.0 mm Industrial PC, Windows-based control, network-capable Djdox S Igcspfx Ac Nskh Conveyor direction: right to left Transport conveyor Elumatec, year 2010 CNC corner cleaning machine ELUMATEC EV 850 with turning station, automatic profile detection, Windows control system, additional milling unit Machines are sold as inspected, without warranty or guarantee Contact us via WhatsApp to receive information and videos of the machine. +38349563928 If you have any questions or require further information, please feel free to send us a message or call us.