Used Biesse for sale (333)

Condition: used, Year of construction: 2012, input voltage: 400 V, input frequency: 50 Hz, number of slots in tool magazine: 8, Equipment: CE marking, Biesse Klever 1836 G FT CNC machining centre Description Technical data: Working field: X = 3811mm, Y = 1876mm, Z = 150mm Axes stroke: X = 4201mm, Y = 2016mm, Z = 260mm Maximum axes speed: X = 22.5m/min Y = 22.5m/min, Z = 12.5m/min Safety devices in conformity with the basic safety requirements of the regulation 2006/42/CE Presetting device for contact measurement of tool length with measuring plate diameter 80mm Automatic lubrication system Side rack toolchanger on machine's base frame - for HSK F63 or HSK F50 tools Toolchanger capacity: 10pos. Hfedpozqt Ersfx Ag Eon Vacuum locking system - Klever 1836 G FT Work table with prearrangement for vacuum and electrical connection for vacuum pumps. Division of the table in 6 independent vacuum zones with automatic selection. 2 x 300 m3/h rotary claws vacuum pump BH 5 boring head can be equipped with up to 5 independent tools for single and multiple borings on panel's top surface. The head is composed of:· 5 independent vertical spindles with a pitch of 32 mm placed along X HSK F63 Electrospindle – 9.0 kW (12 Hp), air cooled in replacement of the one included in the base machine configuration - Inclusive of the 2 nozzles air blower - Inclusive of the electrical and pneumatic pre-arrangement for the BH5 boring head Pre arrangement for tool lubrication system Inclusive of: - X axis cable-holder chain closed version in replacement of the standard one included in the base machine configuration - Mechanical, electrical and pneumatic prearrangement for tool lubrication system Software update from BiesseWorks Basic machine to BiesseWorks Advanced machine BiesseNest (Despite our great care all changes, mistakes in technical data, prices and all information is subject to (typing) errors. No guarantee on printed data! Availability subject to prior sales). (Trotz größter Sorgfalt bleiben Änderungen, Irrtümer bei technischen Daten, Preisen und allen Angaben (Tipp-)Fehler vorbehalten. Keine Gewähr auf gedruckte Daten! Verfügbarkeit vorbehaltlich Zwischenverkauf). Prices excl. advertisement cost MachineSeeker / Preise exkl. Inserierungskosten MaschinenSucher Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: used, Year of manufacture: 2011 Colour: White Empty weight: 3.000 kg - Year: 2011 - Serial number: 56604 - Drilling unit present: Yes - Saw unit present: Yes - Vacuum pump present: Yes - Tools included: Yes - Transport weight [kg]: 3000kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Hfjdpfx Ajzy Nb Ijg Ejn Yorick Diebels

Condition: used, Biesse Skipper V31 CNC drilling center Working area: Length X: 3200 mm Width Y: 900 mm Thickness Z: 70 mm Feed rate: X-axis: 25 m/min Y-axis: 50 m/min Z-axis: 25 m/min Drilling head motor power: 1.7 KW 10 vertical drilling spindles, 6 horizontal drills (4 drills on the X-axis, 2 drills on the Y-axis), Saw for grooving on the X-axis, Biesse Works software 700 operating hours 4.5 KW milling spindle, ISO30 chuck with stepless speed adjustment up to 18,000 rpm. CE marking Hfjdpfxjz Hx Nre Ag Een Machine in good condition, drilling unit and axes operate quietly, weight 1,300 kg

Condition: ready for operation (used), Year of construction: 2014, Edgebander manufactured in 2014. This BIESSE AKRON 1330 features a panel thickness capacity of 10–60 mm and edge thickness capabilities for rolls from 0.4–3 mm and strips up to 5 mm. It operates at a feed speed of approximately 12 m/min and includes a touch-screen operator panel for easy control of glue temperature, panel height, trimming unit, and machining changeover. If you are looking to get high-quality edging capabilities, consider the BIESSE AKRON 1330 machine we have for sale. Contact us for further details. • Version: 1330 • Panel thickness: 10–60 mm • Edge thickness: • Rolls: 0.4–3 mm • Strips: up to 5 mm • Feed speed: approx. 12 m/min • Control: Touch-screen operator panel • Control functions: glue temperature, panel height, trimming unit control, machining changeover Hfodpfez Hl Sgjx Ag Ejn

Condition: used, Year of construction: 2015, Biesse Uniline 4500 CNC processing center (i.e. for window & door frames) Description Biesse Uniline 4500 Machine nr; 1000004833 Year of construction: 2015 Machining lengths: 175 - 4,500 mm Number of milling motors: 1 Motor power: 19.2KW (25.7HP) Label printer: No Tool holder: HSK 63F Changer type: Fixed + movable Number of positions in toolchanger: Flexstore total 44 Software: BiesseWorks Office licenses: 1 x Fencing: Yes complete Extra The machine has a MULTIFUNCTION UNIT EQUIPPED with a drilling unit with four tool outputs. This is placed at the front of the processing unit. Also equipped with a CNC-controlled rotation axis so that the required output is automatically selected. The outputs are equipped with ER25 recordings, speed 5,000 rpm. (If this drilling unit is also to be used for sloping frames, only two exits (opposite each other) are used). The machine also has a MULTIFUNCTION UNIT EQUIPPED with a mortising unit with two tool outlets. This is placed at the front of the processing unit. Also equipped with a CNC-controlled rotation axis so that the required output is automatically selected. The outputs are equipped with ER32 recordings, speed 16,000 rpm. (Despite our great care all changes, mistakes in technical data, prices and all information is subject to (typing) errors. No guarantee on printed data! Availability subject to prior sales). (Trotz größter Sorgfalt bleiben Änderungen, Irrtümer bei technischen Daten, Preisen und allen Angaben (Tipp-)Fehler vorbehalten. Keine Gewähr auf gedruckte Daten! Verfügbarkeit vorbehaltlich Zwischenverkauf). Prices excl. advertisement cost MachineSeeker / Preise exkl. Inserierungskosten MaschinenSucher Hfedpfxezp Hbqo Ag Een Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, Working area X: approx. 3765 mm Working area Y: approx. 1560 mm Working area Z: 170 mm 5-axis electrospindle, without drilling units Tool changer with approx. 16 positions Work table: Nesting table Software: bSolid 2 Busch MM 1322 vacuum pumps Automatic panel loading system Automatic panel unloading system with motorized transfer Protective screens Hodpfx Agszccfyj Eofn Weight approx. 3700 kg. Available January 2027

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, Working range X: 3855 mm Working range Y: 2650 mm Working range Z: 200 mm 5-axis electrospindle Vertical drilling heads: 29 Horizontal drilling heads X: 6 Hfodpfoz Atb Rjx Ag Een Horizontal drilling heads Y: 4 Saw blade for grooving in the X direction 33-position chain tool changer Worktable with 6 supports 250 m3/h vacuum pump (2023) Software: BiesseWorks and NC-Hops Direkt installed Chip conveyor belt Safety mats Protective netting Approximate weight: 6300 kg Only 2572 hours on the 5-axis spindle and 1488 hours on the drilling unit Available at the end of November 2026

Condition: used, Year of construction: 2017, machine/vehicle number: 1000025340, functionality: fully functional, travel distance X-axis: 6,735 mm, travel distance Y-axis: 1,650 mm, travel distance Z-axis: 245,290 mm, workpiece height (max.): 60 mm, controller manufacturer: Biesse BH 660, bSolid, bEdge, rapid traverse Z-axis: 30 m/min, rapid traverse X-axis: 85 m/min, rapid traverse Y-axis: 85 m/min, Assembly of the the machine could be done by our subcontractor on the agreed price. Hfjdpfxoycvcxe Ag Esn

Condition: used, Year of construction: 2022, - Work surface: 3800 x 2200 mm with rear lifting table - Maximum cutting length: 3800 mm - Saw blade overhang: 108 mm - Maximum gripper opening: 100 mm - Minimum panel size: 1830 x 915 mm - Maximum panel size: 3660 x 2200 mm - Maximum stack height: 630 mm - Minimum thickness on the lifting table: 10 mm - Maximum lifting table stroke: 985 mm - Load capacity of the lifting table: 5 t Panel dividing saw Manufacturer: Biesse Type: Selco WNT 630 Year of manufacture: 2022 Technical data - Work surface: 3800 x 2200 mm with rear lifting table - Maximum cutting length: 3800 mm - Saw blade overhang: 108 mm - Maximum gripper opening: 100 mm - Minimum panel size: 1830 x 915 mm - Maximum panel size: 3660 x 2200 mm - Maximum stack height: 630 mm Hodszuyl Tspfx Ag Eofn - Minimum thickness on the lifting table: 10 mm - Maximum lifting table stroke: 985 mm - Load capacity of the lifting table: 5 t The machine is almost new and has only been used for a few months. Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is non-binding.

Condition: like new (used), Year of construction: 2024, workpiece height (max.): 60 mm, edge thickness (max.): 3 mm, overall weight: 2,450 kg, We offer this Biesse Akron 1445A edge banding machine as new, manufactured in 2024. Manufacturer: Biesse Model: Akron 1445A Year of manufacture: 2024 Condition: Like new The edge banding machine is in excellent condition and is practically new. It has only processed 4,000 meters. The machine is in the highest possible configuration. ADZ02 separating agent application unit RT02 pre-milling unit Hybrid application head for EVA/PUR granules, with a QM-703 pre-coating unit for EVA adhesive and NC-controlled adhesive flow Adaptive infrared lamp AdIRL-700 IT70-S end trimming unit RS-502 unit for milling the top and bottom edges RI-501 unit for fine milling Sliding unit for the corner rounding unit Multifunctional unit for corner rounding with 2 motors AR02 E RB02 unit for radius/flat edge scrapers RC02 unit for adhesive residue scrapers LPT02 cleaning unit SZ02 brushing unit NC axis set – AX-1: NC axis on the infeed fence. AX-1: NC axis on the edge pressure rollers. AX-4: NC axes on the fine milling unit. AX-2: NC axes on the corner rounding unit. AX-4: NC axes on the edge scraper unit. Set for multi-speed feed (12–18 m/min) Additional side support for workpieces Flat air table PRO-NESTING set Hodpfx Aoz Elnxog Eofn (Nesting set) Set for delicate workpieces / top pressure belt If you have any questions or need further information, please feel free to send us a message or contact us by phone.

Condition: used, Year of construction: 2001, Equipment: CE marking, Biesse Rover ROVER 24 FT CNC machining centre Description The work surface consists of a grid table consisting of two phenol tables with a size of 1540 x 1250 mm that can be linked. The grid table has a grid of 30 mm and vacuum openings of 9 mm in a grid of 150 mm in the X and Y-richting. The grid table is equipped with 6 pneumatic zero point cams at the rear and 1 on the left and right sides. • The working range of the machine is 3100 x 1300 x 155 mm. (Z-stroke 250 mm ) • The speed on the X-axis is programmable between 0 and 100 m/min. • The speed on the Y-axis is programmable between 0 and 100 m/min. • The speed on the Z axis is programmable between 0 and 15 m/min. • The three axes are driven by brushless digital DC servo motors. CNC numerical control type NC-500 Milling motor with automatic change system with ISO30. The power of this milling motor is 10.5 hp at 24,000 rpm 10-position tool changer that moves with the unit Drilling unit with fourteen independent drill spindles Groove saw Static frequency converter Centralized pneumatic system Centralized lubrication system Vacuum pump with a capacity of 250 m3/hour Hfodszqtztjpfx Ag Esn Two push-button control panels Working pressure for air 6 kg/cm2. Voltage 380 Volt, 50 Hz. Safety mats on the front. CE (Despite our great care all changes, mistakes in technical data, prices and all information is subject to (typing) errors. No guarantee on printed data! Availability subject to prior sales). (Trotz größter Sorgfalt bleiben Änderungen, Irrtümer bei technischen Daten, Preisen und allen Angaben (Tipp-)Fehler vorbehalten. Keine Gewähr auf gedruckte Daten! Verfügbarkeit vorbehaltlich Zwischenverkauf). Prices excl. advertisement cost MachineSeeker / Preise exkl. Inserierungskosten MaschinenSucher Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: good (used), Year of construction: 2015, functionality: fully functional, TS07 Control System · 7” LCD Touch Screen graphical display Edge trimming unit RT02, 1 set of diameter trimming cutters, H=65 mm for edge trimming unit RT02 Hsdjzuavlepfx Ag Eofn Gluing unit SP03 End trimming unit IT03 Fine trimming unit RF02 Edge rounding unit AR02 Edge scraper RB02 Glue scraper unit RC02 Cleaning unit LPT02 Anti-adhesive unit ADZ02 AX-1, NC axis on the stop AX-1, motorized, controlled pressure beam AX-1, NC axis for pressure rollers for the gluing unit AX-4, NC axis for the fine trimming unit AX-2 NC axis on the edge rounding unit AR02 AX-4 NC axis on the edge scraper RB02

Condition: used, Year of construction: 2018, total height: 2,200 mm, total length: 5,350 mm, total width: 1,200 mm, Colour: White Weight: 3.500 kg Price: On request - Year: 2018 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 1000022855 - Number of units [pcs]: 8 - └ 1st unit type: Pre-milling unit - - Tools available: Yes - └ 2nd unit type: Glue unit - └ 3rd unit type: Pressure rollers - - Tools available: Yes - └ 4th unit type: Cap unit - - Tools available: Yes - └ 5th unit type: Rough milling unit - - Tools available: Yes - └ 6th unit type: Corner rounding unit - - Tools available: Yes - └ 7th unit type: Flat scraping unit - - Tools available: Yes Hfedpfx Ajzw El Rsg Een - └ 8th unit type: Brushing unit - - Tools available: Yes - Min. edge band thickness [mm]: 0.4 - Max. edge band thickness [mm]: 3 - Edge band height [mm]: 64 - Min. panel thickness [mm]: 10 - Max. panel thickness [mm]: 60 - Min. panel width [mm]: 85 - Max. panel width [mm]: 3200 - Min. panel length [mm]: 140 - Max. panel length [mm]: 3200 - Min. feed speed [m/min]: 12 - Max. feed speed [m/min]: 18 - Feed speed control: Variable - Left or right-sided: Yes - Max. spindle speed [rpm]: 12000 - Voltage [V]: 400 - Current consumption [A]: 20 - Fuse [A]: 32 - Power [kW]: 11.0 - Transport dimensions: 5350mm x 1200mm x 2200mm (l x w x h) - Transport weight [kg]: 3500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2013, power: 17.1 kW (23.25 HP), input voltage: 400 V, input current: 29 A, input frequency: 50 Hz, travel distance X-axis: 4,320 mm, travel distance Y-axis: 1,326 mm, travel distance Z-axis: 170 mm, number of axes: 5, number of slots in tool magazine: 33, Equipment: CE marking, Biesse Rover A 1343 CNC machining centre 5-Axis Description Rover A ATS CNC Machining Centers Working ranges X = 4,320 mm; Y = 1. 326 mm;Z = 170 mm Waste conveyor belt Automatic lubrication system Remote console Hodpfsy U Naisx Ag Eefn 1 x 250 m3/h vacuum pump for standard system Auxiliary vacuum system for double working area machine Multi-zone 8 bars and 24 cups with automatic positioning (ATS-EPS X-Y) 8 reference stops with 115 mm rear stroke 8 front reference stops with 140 mm stroke positioned at a height of 1190 mm from the rear stops 4 side stops, with 140 mm stroke (2 right + 2 left) with implant 2 additional side stops, with 140 mm stroke (1 right + 1 left) Pneumatic system for panel lift Coolant control unit to replace the heat exchanger supplied with 13kW 5-axis units. Operating unit 5 interpolating axes 13 kW (17.4 Hp), HSK F63 connection, liquid-cooled. BiesseWorks Advanced Machine Chain tool magazine with 33 places - centre distance 120 mm (Despite our great care all changes, mistakes in technical data, prices and all information is subject to (typing) errors. No guarantee on printed data! Availability subject to prior sales). (Trotz größter Sorgfalt bleiben Änderungen, Irrtümer bei technischen Daten, Preisen und allen Angaben (Tipp-)Fehler vorbehalten. Keine Gewähr auf gedruckte Daten! Verfügbarkeit vorbehaltlich Zwischenverkauf). Prices excl. advertisement cost MachineSeeker / Preise exkl. Inserierungskosten MaschinenSucher Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: used, Year of construction: 2017, The BIESSE ROVER A 1643 EDGE is a comprehensively equipped CNC machining center with a 5-axis machining head and an integrated edge banding unit. Working area, X-axis: 4,320 mm Swing machining in X: 1,620 mm Working area, Y-axis: approx. 1,580-1,660 mm Travel, Z-axis: 180 mm Edge banding Working area, X-axis: 3,300 mm Working area, Y-axis: 1,540 mm Maximum loading width in Y: 1,900 mm, expandable to up to 2,100 mm 5-axis unit 5-axis machining head C-axis: continuous 360° rotation B-axis: continuous 360° rotation B-axis speed: 18 rpm C-axis speed: 18 rpm Maximum spindle speed: 24,000 rpm Power 11 kW in S1 operation 13 kW in S6 operation Additional features Maximum undercut angle: -10° Collision monitoring for the 5-axis unit Prepared for the use of attachments on the 5-axis unit Work table and clamping system ATS work table 8 support rails 32 adjustable consoles 32 pneumatic vacuum cups Vacuum cups adjustable in 15 steps Pneumatic system divided into 2 working zones along the X-axis Vacuum system Vacuum pump capacity: 250 m³/h Additional equipment 6 lifting bars for easier loading and unloading 28 sensors for detecting lowered stops Stops and positioning 8 rear stops 8 center stops 4 side stops (2 left + 2 right) 2 additional side stops 4 removable center stops (2 left + 2 right) 2 additional center stops Pneumatic positioning and lowering of the stops Drilling unit BH 24L drilling head 13 independent vertical spindles 5 independent horizontal spindles Grooving saw, 120 mm Maximum groove depth: 25 mm Hfjdpfx Agozuwyze Esn Programmable spindle speed up to 6,000 rpm Tool changer 16-position rotary magazine Mounted on the X-axis carriage For tools and attachments Capacities Maximum tool/attachment weight: 7.5 kg Maximum total load of the magazine: 55 kg Edge banding unit GU60A edge banding unit For workpieces up to 60 mm thick Edge banding speed up to 20 m/min Double pressure roller system Glue pot with hot melt system Edge heating lamp, 600 W CNC-controlled edge feeding system Automatic edge trimming Sensor for closed geometric shapes Accessories for edge machining Edge magazine 2-roller edge magazine mounted on the X-axis carriage Maximum roller diameter: 800 mm Maximum edge height: 65 mm Additional units Rounding tool 85 mm, HSK F63 Saw unit HSK F63 for cuts and grooves Maximum saw blade diameter: 215 mm Maximum saw speed: 8,400 rpm Maximum cutting depth with a 215 mm saw blade: 68 mm Post-processing Combined glue joint and edge trimming blade units Tool sets for different edge thicknesses Software bSolid basic module 2D CAD environment Import of DXF, CIX and BPP files 3D machine simulation Tool management Management of 5-axis machining through positioning Assistant-supported program creation

Condition: used, Year of construction: 2017, Edge banding machine Manufacturer: Biesse Type: Jade 240 Hodpfxozuyixj Ag Ejfn Year of manufacture: 2017 Technical data Note: [b]The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.[/i]

Condition: good (used), Year of construction: 2001, I sell the panel beam saw BIESSE SELCO EB70. Year 2001. Cutting size 3200x3100mm. Cutting height 55mm. Main motor 7,5kW Scoring motor 2,2kW Total area covered W.5422mm x D.6488mm Hfodpfx Agjz Ii Aro Een Gripper with pneumatic regulation Side alignment top roller with pneumatic stroke. Optimising software included. Very good condition. Available immediately.

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, Equipment: documentation/manual, Decommissioned 07.2026 as unnecessary Hfsdpfxoznk Rme Ag Eon

Condition: ready for operation (used), Year of construction: 2023, operating hours: 6 h, travel distance X-axis: 2,465 mm, travel distance Y-axis: 1,260 mm, travel distance Z-axis: 378 mm, number of axes: 5, This 5-axis BIESSE ROVER PLAST A FT 1224 was manufactured in 2023. It features a working area of 2465 mm x 1260 mm and a Z-axis stroke of 378 mm. The machine is equipped with a powerful 13 kW machining unit capable of up to 20,000 RPM. If you are looking to get high-quality CNC wood machining capabilities, consider the BIESSE ROVER PLAST A FT 1224 machine we have for sale. Contact us for further details. Hsdpfx Asz H Rk Usg Esfn • Working Area / Table Dimensions: X = 2465 mm, Y = 1260 mm• Z-Axis Stroke: 378 mm• Maximum Axis Speed: X = 85 m/min, Y = 60 m/min, Z = 20 m/min• Maximum Piece Passage in Z: 200 mm (170 mm with Sweeper Arm)• Worktable Type: FT PLUS phenolic layer table with 30 mm grid layout, 12 mm MDF matrix plate• Vacuum System: Multi-zone vacuum system (4 independent zones)• Vacuum Pump: 1x 250 m³/h cam vacuum pump (dry running, maintenance free)• Machining Unit: 5-interpolating axes machining unit, 13 kW (17.4 HP) S6 / 11 kW S1, HSK F63 adapter, liquid-cooled, up to 20,000 RPM• Axis Angles: C-axis 360° continuous rotation, B-axis +/- 150°• Coolant Unit: Liquid cooling system (absorbs 1600 W) for electrospindle• Tool Tool Changer / Magazines:• 13/16-position linear side tool changer mounted on machine bed• 8-position revolving tool changer mounted on X-carriage• Measuring Systems: Digital tool length presetter (for diameters up to 130 mm)• Software: BH660 PC-based control with WRT (Windows Real Time), bSolid (3D CAD/CAM), bSolid 3-Axis & 5-Axis machining modules, bNest (Nesting module), bSolid File Import Module• Additional Features:• LED light strip for work area illumination & L-shaped LED projector for vacuum pod positioning• Ionizer for static charge reduction on plastics• Tool lubrication system (air-oil mist) for non-ferrous material processing• Wired remote control pad• Uniclamp adapters (4x) and Uniclamp clamping devices (4x, H=74mm)• Vacuum modules: 6x (132x146 H74mm), 4x (132x75 H74mm), 4x (132x54 H74mm)• Air cushion blower for easy loading/unloading• Barcode scanner (1D wireless)• UPS backup for machine PC (7-10 min power backup)• Power Supply: 400 V / 50 Hz, 3-phase (without neutral conductor), voltage tolerance +/-10%Safety Standard: CE / UKCA with Full Bumper safety system and protective enclosure

Condition: used, Year of construction: 2014, workpiece height (max.): 60 mm, edge thickness (max.): 3 mm, feed rate X-axis: 25 m/min, working width: 3,200 mm, The machine has the following configuration: Number of machining units: 8 Pressure bar: With rubber belt Panel support stop: Present Overpressure: Present CNC positioning: Present Panel infeed trimming system: Present Number of units in the trimming area: 1 Number of units in the edge processing area: 6 Trimming unit Unit: Flush trimming unit Manufacturer/Model: RT30 Hfsdpfx Agez Ekh De Een Automatic time intervention: Present Motor power: 3.5 kW Speed: 9,000 RPM Edge banding Glue application system: EVA Heating lamps for edges: Present Edge magazine: Roller magazine Number of magazine positions: 6 Hot melt glue tank: Present Hot melt glue pre-melter: HM20 Pressure roller unit: Present Number of pressure rollers: 4 CNC positioning: Present End capping unit Manufacturer/Model: IT90-S Number of motors: 2 Maximum processing speed: 28 m/min Motor power: 0.65 kW Speed: 12,000 RPM Corner milling unit Manufacturer/Model: RF10 Number of motors: 2 Motor power: 1 kW Speed: 12,000 RPM Corner rounding unit Manufacturer/Model: AR30 Number of motors: 2 Automatic tool changer: Present Maximum processing speed: 18 m/min Motor power: 0.65 kW Speed: 12,000 RPM Edge scraping unit Manufacturer/Model: RB40 CNC positioning: Present Glue scraping unit Manufacturer/Model: RC20 Brushing unit Manufacturer/Model: SZ30 Number of motors: 2 Motor power: 0.37 kW Speed: 1,400 RPM TECHNICAL DETAILS Minimum panel height: 10 mm Maximum panel height: 60 mm Minimum panel length: 150 mm Minimum panel width: 100 mm Maximum panel width: 3,200 mm Minimum edge thickness: 0.3 mm Maximum edge thickness: 3 mm Maximum feed rate: 25 m/min MACHINE DETAILS Electrical connection power: 25 kW EQUIPMENT CE conformity The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 5062

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, 5-Axis Machining Center Biesse C9.50 - Beam table – Material can be clamped with suction cups or hold-down clamps Dual tool magazine configuration – highly flexible for production Top magazine – Revolver type Bottom magazine – Chain carousel (additional saw blade for HSK mounting – spindle) 8 beam tables, supports 16 kW spindle Very large aggregate/saw unit Hfsdpfeyl Uuxjx Ag Esn Becker pump Year of manufacture: 2009

Condition: excellent (used), Year of construction: 2023, Biesse Akron 1330 A Edgebander Single-sided edgebander AKRON 1330-A Gluing Unit SP03 End trimming Unit IT03 Fine trimming Unit RF02 Corner rounding Unit AR02 PRE-MILLING UNIT RT02 Symmetrical diamond tools H=45 mm Z=2+2 30° included. EDGE SCRAPER RB02 Tools are not included. GLUE SCRAPER UNIT RC02 BRUSHING UNIT SZ02 SUPPLEMENTARY LATERAL PANEL SUPPORT KIT FOR THE INSTALLATION OF THE PANEL RETURN SYSTEM MANUAL INFEED SYSTEM FOR NARROW PIECES KIT FOR PROCESSING "SHADOW LINE" PROFILE PANELS STRAIGHT AIR TABLE AT THE MACHINE INFEED ANTIADHESIVE UNIT ADZ02 PAIR DIAMOND-COATED MILLING CUTTERS H=65 mm Z=2+2 30°.In replacement of standard tools. HYBRID GLUING CHUCK FOR GRANULATED EVA/PUR GLUE INSTEAD OF THE STANDARD SYSTEM TM15 HYBRID PREMELTER FOR EVA/PUR GLUE ADAPTIVE INFRA RED LAMP AdIRL-700 AX-4, NC AXIS ON FINE TRIMMING UNIT PRO-NESTING KIT FOR FINE TRIMMING UNIT Pair of multiprofile milling cutters for fine trimming unit: chamfering 25 degrees, R=2 mm + R=1 mm, straight profile for solid wood AX-2, NC AXIS ON CORNER ROUNDING UNIT ROUNDING FUNCTION ONLY SLIDING UNIT FOR CORNER ROUNDING UNIT Pair of milling cutters, R=2 mm, for corner rounding unit Pair of milling cutters, R = 1 mm, for corner rounding unit AX-4, NC AXIS ON EDGE SCRAPER PRO-NESTING KIT FOR EDGE SCRAPER UNIT Pair of knives R=2 mm, for edge scraper Pair of knives R=1 mm, for edge scraper CLEANING UNIT LPT02 (Despite our great care all changes, mistakes in technical data, prices and all information is subject to (typing) errors. No guarantee on printed data! Availability subject to prior sales). (Trotz größter Sorgfalt bleiben Änderungen, Irrtümer bei technischen Daten, Preisen und allen Angaben (Tipp-)Fehler vorbehalten. Keine Gewähr auf gedruckte Daten! Verfügbarkeit vorbehaltlich Zwischenverkauf). Prices excl. advertisement cost MachineSeeker / Preise exkl. Inserierungskosten MaschinenSucher Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland Hjdpfjyyb Icsx Ag Ejfn

Condition: ready for operation (used), Year of construction: 2022, This BIESSE Selco WNT 630 panel saw was manufactured in 2022. It features a maximum cutting length of 3800 mm, saw blade projection of 108 mm, and a lift table capacity of 5 tons. Ideal for handling large panels up to 3660 x 2200 mm. If you are looking to get high-quality cutting capabilities, consider the BIESSE Selco WNT 630 machine we have for sale. Contact us for more information. • Working size: 3800 x 2200 mm • Max cutting length: 3800 mm • Saw blade projection: 108 mm Hfedszug E Hspfx Ag Ejn • Max gripper opening: 100 mm • Min panel size: 1830 x 915 mm • Max panel size: 3660 x 2200 mm • Max packet height: 630 mm • Condition: Almost new, used only a few months Additional equipment • Back lift table: • Minimum panel thickness on lift table: 10 mm • Maximum lift: 985 mm • Lift table capacity: 5 t

Condition: used, Year of construction: 2010, power: 17.1 kW (23.25 HP), input voltage: 400 V, input current: 44 A, input frequency: 50 Hz, travel distance X-axis: 4,320 mm, travel distance Y-axis: 1,326 mm, travel distance Z-axis: 170 mm, number of axes: 5, number of slots in tool magazine: 33, overall weight: 6,700 kg, Equipment: CE marking, Biesse Rover C 6.50 Config. 3 CNC machining centre 5-Axis Description Numerically controlled machining center ROVER C 6.50 Working fields - configuration 3 :X = 4600 mm; Y = 1535 mm; Z = 275 mm CE Safety devices 8 ATS panel supports - L = 152 5 mm - 32 sliding bases Automatic positioning of 8 panel supports and sliding bases (EPS X-Y ) Belt conveyor for the removal of chips and off-cuts Pneumatic locking system divided in 2 work areas in X 8 rear reference stops with a stroke of 115 mm 8 Stops with a stroke of 140 mm positioned at 1175 mm (L= 12 80 - 1525 - 1800 mm) 4 Side stops with a stroke of 140 mm (2 Lh + 2 Rh) inclusive of the pneumatic system. 4 removable central stops with a stroke of 140 mm (2 Lh + 2 Rh) incl. of the pneumatic system Sensor for the detection of lowered stops Pneumatic system for lifting bar supports with double pneumatic stroke Hjdpfx Agezqdmaj Eefn 6 lifting bar supports with double pneumatic stroke (H=74mm)uniclamps Vacuum system for a 250 m3/h pump 1 x 250 m3/h rotary veins vacuum pump for standard vacuum system Composition C3-A1 Operating unit with 5 interpolating axes Prearrangement for the assembly of chip deflectors with pneumatic or inductive sensor on a 5-axes operating unit Composition C3-P2 Chain tool changer with 33 places at 120 mm center distance Iron gripper on chain toolchanger for chip deflector compatible with 5-axes electrospindle RH Chip deflector for 5-axes operating unit Liquid cooling unit for liquid cooled systems Automatic lubrication system Software update from BiesseWorks Basic machine to BiesseWorks Advanced machine CE (Despite our great care all changes, mistakes in technical data, prices and all information is subject to (typing) errors. No guarantee on printed data! Availability subject to prior sales). (Trotz größter Sorgfalt bleiben Änderungen, Irrtümer bei technischen Daten, Preisen und allen Angaben (Tipp-)Fehler vorbehalten. Keine Gewähr auf gedruckte Daten! Verfügbarkeit vorbehaltlich Zwischenverkauf). Prices excl. advertisement cost MachineSeeker / Preise exkl. Inserierungskosten MaschinenSucher Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: used, Year of construction: 2014, Main spindle power: 13.2 kW Drilling unit motor power: 7 kW 3-axis machine Hfodozuwxdjpfx Ag Een Drilling unit: Technical data - Nut saw - 2 horizontal drilling spindles in the X-axis (left/right) - 1 horizontal drilling spindle in the Y-axis (left/right) - 10 vertical drilling spindles