Used Biesse Fse for sale (327)

Condition: used, Year of construction: 1992, Used machine Year of manufacture: 1992 Working area: X-axis: 2310 mm, Y-axis: 628 mm, Z-axis: 90 mm Max. programmable speed: X-axis: 100 m/min; Y-axis: 75 m/min; Z-axis: 15 m/min Drill holder: diameter 10 mm Spindle speed: 4000 rpm Grooving saw: diameter 120 mm Drill spindles: 4 horizontal spindles on the X-axis, 12 vertical spindles in the X-line Operating air pressure: 6 bar Maximum compressed air consumption: 0.75 NL/cycle Installed power: max. 7.5 kW Vacuum tool capacity: 40 m³/h Hodpfxowwnf Ns Afiefn CNC: Display: monochrome 9" Floppy disk drive PLC for machine cycle control Availability: short-term Stock location: Röllbach

Condition: good (used), BIESSE ARROW ATS 5 AXIS NC1000 MACHINING CENTER Machining head with revolver tool change Hsdoukcy Eopfx Afiefn BH39 drilling machine, 250m3 vacuum pump (this machine had been in operation for 10 years in a woodworking school)

Condition: ready for operation (used), Year of construction: 2021, General Data Measurements depth 5213 mm Machine weight 3600 kg Main Drive Spindle motor power 8 kW Number of axis 4 Hfodpfxjw N Tl Rs Afisn Additional Equipment Pre-milling Unit: Yes Glue Application Unit: Yes End Trimmers: Yes Top/Bottom Trimmers: Yes Corner Rounding Unit: Yes Scraping Unit: Yes Glue Scraping Unit: Yes Glue Buffing Unit: Yes This 4-axis BIESSE Jade 240 was manufactured in 2021, featuring a single-sided automatic edgebander design. It offers a feed speed of 12 m/min and can handle panel thicknesses from 10 to 60 mm and edge thicknesses up to 8 mm. Equipped with comprehensive units including pre-milling, glue application, and end trimmers, plus a touch screen control for enhanced usability. Consider the opportunity to buy this BIESSE Jade 240 edgebander. Contact us for more information. Application Types Edge Banding

Condition: used, machine/vehicle number: 008134, X axis working area: 5780 mm Y axis working area: 1930 mm Working Table: Pod and Rail Main Electrospindle power: 13 KW Number of controlled axes: 4 axes Hfedpfx Afjw Idgijion Total number of drilling spindles: 32 Total number of tool changer positions: 28

Condition: used, Year of construction: 1999, functionality: fully functional, travel distance X-axis: 2,900 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 140 mm, feed rate X-axis: 75 m/min, feed rate Y-axis: 75 m/min, feed rate Z-axis: 15 m/min, controller manufacturer: XNC, spindle speed (min.): 1,000 rpm, spindle speed (max.): 24,000 rpm, spindle motor power: 11,000 W, number of spindles: 1, number of slots in tool magazine: 7, Equipment: CE marking, chip conveyor, documentation/manual, rotational speed infinitely variable, Biesse Rover 23 woodworking center – fully equipped Still in use to this day, 1 to 2 days a week, but for sale due to business closure in Slovakia. Always well maintained. ✅ Powerful performance Hsdpjw S Edwsfx Afiofn Milling spindle with ceramic bearings (11 kW) Adjustable speed: 1,000 – 24,000 rpm Drilling head with 10 vertical and 6 horizontal drills Circular saw on the X-axis ✅ Efficient & flexible Pneumatically adjustable vacuum pods in 6 rows, 3 per row 100 m³ vacuum pump Tool magazine with 7 positions (ISO 30) All adapters and tools included ✅ User-friendly Conveyor belt for automatic chip removal Immediately operational, fully equipped 📍 The machine is located in Slovakia and must be disassembled and collected by the buyer on site.

Condition: excellent (used), Year of construction: 2022, Selco WNT 630 Beamsaw working size 3800x2200 with back lift table Technical specifications: Max cutting lenght: 3800 mm, Saw blade projection: 108 mm, Max gripper opening: 100 mm, Min panel size: 1830 x 915 mm, Max panel size: 3660 x 2200 mm, Max packet hight: 630 mm, Min. thickness on lift table: 10 mm, Lift table max lift: 985 mm, Lift table capacity: 5 t Hsdjv T Sdispfx Afiofn Back loading table or side loading oppening for panels 3800 x 2200 mm

Condition: excellent (used), Year of construction: 1997, Rover 20 machining center Working area 2,893 x 950 mm, milling spindle with ISO30 tool holder 3.6 kW, drilling unit with 10 vertical and 6 horizontal drills as well as grooving saw, 6-fold tool changer. The NC410 control had a floppy disk drive and a colour screen as well as the simplest, graphically supported programming options. Furthermore, the Rover 20 already enabled pendulum machining. Dimensions: approx. 3800 x 2000, height 1600 Control cabinet: 950 x 700 x 1300 From location Hfsdpfx Afelc Dwnjion

Condition: used, CNC machining center BIESSE Rover C 6.50 CONF.2, year 2007 Working area: approx. 140 × 460 cm Machine dimensions: 300 × 650 cm Hodow Rpd Sjpfx Afisfn Weight: approx. 6,100 kg Two working heads Tool magazine: 22 positions Vertical drilling spindles: 28 pcs Horizontal drilling spindles: 12 pcs Price negotiable, available immediately. Price is without VAT.

Condition: ready for operation (used), Year of construction: 2005, General Data Machine weight 1590 kg Additional Equipment Pneumatic Roller Position Selection /Manual Plate Adjustment with Scale /Automatic Thickness Adjustment with Digital Working Height Display /Pinch Roller /Air Cleaners on Platen Head for Belt Cleaning and Cooling/Dual Load Gauges /Additional and Output Extension Table with Rollers Hfsdpfxow Ntf Re Afion Air Requirements: 6 Bar This BIESSE Levia 110 belt sander was manufactured in 2005. It features a maximum working width of 43 inches and belt capacity of 44" x 85". Equipped with a steel contact roller and a rubber roller, it ensures precise sanding. The machine includes automatic thickness adjustment with a digital display and a variable speed inverter for optimal control. Reach out for more information about this machine. Application Types Sanding

Condition: used, machine/vehicle number: 008109, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Maximum panel thickness: 12 mm Hodpfx Afsw Idc Doiefn Operating Units: 9 nr

Year of construction: 2012, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: BCOR12150, BIESSE BREMA EKO 902 CNC and vertical dowel insertion machine for reduced cycle times Equipment Features - Clamping grippers measure the thickness to adjust drilling depth - Laser-based measuring system for detecting the front and rear panel edges - Length tolerance compensation correcting the workpiece length in X - 5-position tool changer - Drilling head with individually retractable spindles and grooving saw - Diameter: 120 mm - Gluing and dowel insertion units mounted on Y and Z axes Options - 4.5 kW electrospindle; 18,000 rpm - Special drilling unit for hinges Hfodsw Nytnjpfx Afisn Technical Data - Panel length: 160 - 3200 mm - Panel width: 35 - 900 mm - Panel thickness: 8 - 80 mm - X/Y/Z axis speed: 100 / 60 / 30 m/min - X axis travel: 3200 mm - Y axis travel: 900 mm - Main spindle power: 4.5 kW - Number of controlled axes: 3 axes - Number of drilling spindles: 20 - Number of tool positions: 5

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, STREAM SB LINE (WINNER W1 + STREAM C SB1/SB2 + SP30 + TURNER) Year of production: 2021 Technical condition: very good Panels: chipboard, MDF, HDF, plywood, joinery, solid wood Coatings: ABS / PVC / laminate / veneer / lacquer / melamine Shape: rectangular, without grooves or holes Roughness: average < 5 µm, maximum < 35 µm Working temperature of components: < 50 °C Minimum density: chipboard > 650 kg/m³, MDF > 750 kg/m³ FEEDER / STACKER WINNER W1 Panel length: min. 300 mm Panel width: min. 240 mm (double row: min. 120+120 mm), max. 1200 mm (double row: max. 600+600 mm) Panel thickness: 10–60 mm Panel weight: up to 100 kg Panel flatness: ±1 mm/m (max. ±2 mm over the entire length) Height of uniform stack on the conveyor (H=250 mm): min. 300 mm, max. 1500 mm High-speed unit speeds: Y-axis (carriage) 210 m/min, Z-axis (suction frame) 130 m/min (+ productivity ~2 cycles/min) Base productivity: 15 cycles/min (depending on composition/weight/gaps) Compressed air consumption: 950 Nl/min Installed power: 16 kW Option: powered panel separator – air 1050 Nl/min, power 8 kW DOUBLE-SIDED EDGE BANDING MACHINES STREAM C SB1 (first pass) Panel overhang beyond the conveyor: 35 mm Panel thickness: 10–60 mm Edge thickness: 0.3–3 mm Edge height: 15–65 mm Table height: 950 mm Hfedpfx Afow R Saveijn Panel width: 240–1200 mm (SB1 TWIN: min 100 mm; SB1 SOFT: min 270 mm) SOFT profile depth at 50 mm overhang: 20 mm (greater depth requires adjustment of overhang/additional equipment) STREAM C SB2 (second pass) Panel overhang beyond the conveyor (fixed): 35 mm (SB2 SOFT: 50 mm) Panel thickness: 10–60 mm Edge thickness: 0.3–3 mm Edge height: 15–65 mm Table height: 950 mm Clamp spacing: 500 mm Panel width: 240–1200 mm (SB2 SOFT: min 270 mm) Panel length: 240–2700 mm SOFT profile depth at 50 mm overhang: 20 mm (greater depth requires adjustment of overhang/additional tables) GLUING UNIT SP30 Edge thickness: 0.3–3 mm Maximum cutting section of scissors: 135 mm² (3 × 45) Panel thickness: 10–60 mm Edge height: 15–65 mm Minimum edge length: 250 mm Glue tank: 1.3 kg Glue reservoir: 11 kg Application capacity: 16 kg/h Edge roll diameter: 800 mm EDGE CUTTING LENGTH CONTROL (options) EC40: minimum length 200 mm, speed 40 m/min, tolerance ±3 mm EC60: minimum length 200 mm, speed 60 m/min, tolerance ±5 mm TURNER ROTARY UNITS PT1 / PT2 Panel length: 300–3200 mm Panel width: 200–1200 mm Panel thickness: 10–80 mm Maximum panel weight: 100 kg Panel flatness tolerance: 1 mm/m Floor flatness tolerance (area 8000 × 3000 mm): ±10 mm Compressed air requirement: 250 L/min Installed power: 7 kW Installation and commissioning are available for an additional fee.

Condition: excellent (used), Year of construction: 2009, I sell the edge banding machine BIESSE Akron 425 A-R Year 2009 Configuration: Edge height 8 - 65 mm Edge thickness 0,4 - 8 (12) mm Edge banding, End cutting saws pneumatic adjustable Tilting milling Radius scrapers R2 Polishing brushes Hot-air blower Hfsdpfoiu U Swsx Afion TOP condition, possible to test !

Condition: used, Machinery installation for window and door production Weinig, Biesse Technical Data: Currently, this line is used for the manufacturing of timber windows, timber-aluminium windows, block frame elements, box-type windows, entrance doors, and lift-and-slide doors. The machinery installation comprises: Support table with 3 sections, Weinig Type UC Matic: - Automatic infeed: to moulder Moulder Weinig Type Unikat 23EL: - Year of manufacture: 2007 - 2 bottom spindles - 2 top spindles - 1 right spindle - 1 left spindle - Glazing bead separation - Glazing bead profiling Sanding machine Hess Type Roto Finish Crosscut saw Weinig Type Unirex: - Crosscut saw - Drilling unit - Lock case milling unit Tenoning line Weinig Type United 15 - Slotting spindles: 3 - Max. slotting depth (mm): 120 - Counter-profiling: possible Rebating and profiling machine Weinig Type Univar 12 - Equipped with: 7 spindles Linkage to Biesse line Machining centre Biesse Type WinLine One - Year of manufacture: 2015 - Equipped with: 2 gantries - Workpiece length (mm): up to 6000 - Automatic operation max. length (mm): 4500 - Paternoster buffer - Gantry 1: equipped with saw, travelling tool changer - Gantry 2: equipped with lock case milling unit (FlexiWood), segment table for curve work Hsdpfswa Dk Tex Afijfn Biesse Flexstoor 1 Biesse Flexstoor 2 Sale of the complete line including tools

Condition: ready for operation (used), Year of construction: 2010, This Biesse Techno Kernell was manufactured in 2010. A used multi-spindle drilling line with stacking system, it features infeed and automatic stacking units by Wamhoff. Ideal for efficient, high-volume drilling operations, this machine includes multiple drilling supports both from above and below. If you are looking to get high quality drilling capabilities consider the Biesse Techno Kernell machine we have for tact us for more information. Hjdpjw Nb Nwsfx Afiofn Application Types Boring & Drilling (Wood)

Condition: used, machine/vehicle number: 005973, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt Hsdpfx Afoiiipioisfn Combination Squaring Edgebanding Machine: First Pass Operating Units Right Side: 9 nr Operating Units Left Side: 9 nr

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 1000023523, Biesse Stream B MDS 2.0/15.0 is a single-sided edge banding center with automatic device with manual feeding to dimension and square panels in flexible way bу 4 run. Main technical data Сhаin advance speed: 10-25 m/min Hsdpfjpz Shkex Afijfn Panel length: 250-2700 mm Panel width: 120-1200 mm Panel thickness: 10-60 Panel weight: 75 kg Edge thickness: 0,3-3,0 mm Gluing unit: PU gluing kit, installed in place of to the standard device(EVA). The machine is equipped with a tool for processing edges with a radius R=1/1.5/2.0mm and a chamfer of 25 degrees. Technical condition: the machine is currently used in production.

Year of construction: 2011, condition: used, functionality: fully functional, machine/vehicle number: 95670040, The BM EXTRA machining center is a 5-axis machine, designed and built for processing large-size panels in the construction industry. The machine is fully protected by fixed and movable guards, as well as pressure-sensitive bumpers, ensuring an adequate level of safety. Gantry machining center with 5 dedicated axes and milling motor. Hfodsw Hxaiopfx Afisn

Condition: good (used), Year of construction: 2004, I sell the 3-axis CNC working centre Biesse Rover 24L with beam table, year 2004. Configuration: 3-axis main spindle HSD recently full reconditioned / Water cooled RS1600 Tool magazine 7 positions ISO30 on working head 1 grooving saw X-direction Drilling head 14+4+2 spindles Useful working area 4500x1330mm. 2 working fields, 4 clamping areas Hedpfjh Txlcsx Afisfn Automatic central system of lubrication. Total power 35kW XDNC 2.01 software controller with full instructions. Pump Becker 250/300 m3/h. 5,5KW. Additional vacuum outputs for raster works or connection of additional clamping devices. Good condition. Available immediately. Repair needed: Handles on beam table, rotation of the ISO30 magazine on working head

Condition: excellent (used), C.N.C. WORKING CENTER 3 axes (X-Y-Z) - Goose-neck type - Movable panel (workpiece), static working head - Horizontal position of the panel (workpiece) - Numerical Control with Software Biesse Works - Safety cabin (enclosure) of the working head - Front emergency carpets - No. 1 In-feeding table (with motorized belts) SX - No. 2 Workpieces fixing clamps (for the panels introduction in the working area) - No. 1 Out-feeding table (with motorized belts) DX - Max. useful working area (X - Y - Z) mm 3000 x 1000 x 60 - Minimum workpieces dimensions (X - Y - Z) mm 200 x 70 x 8 Hfjdpfsdh Tf Usx Afion (for longer panels than mm 2000, minimum thickness is mm 13) - Maximum workpieces dimensions (X - Y - Z) mm 3000 x 1000 x 60 - Total installed power Kw 20 BOTTOM WORKING UNITS: - No. 1 Vertical electro-spindle HSK D-50 (power HP 4.8) with Inverter - No. 1 Circular Grooving Saw (on X axe) dia. mm 150, power HP 2,3 with Inverter - No. 29 Vertical drilling spindles - No. 10 Horizontal drilling spindles (8 in X axe + 2 in Y axe) TOP WORKING UNITS: - No. 1 Vertical electro-spindle HSK D-50 (power HP 4.8) with Inverter - No. 1 Circular Grooving Saw (on X axe) dia. mm 150, power HP 2,3 with Inverter - No. 29 Vertical drilling spindles - No. 10 Horizontal drilling spindles (8 in X axe + 2 in Y axe)

Year of construction: 2021, condition: ready for operation (used), General Data Hfodowz Srnspfx Afion Measurements width 5200 mm Measurements depth 6000 mm Machine weight 4567 kg Main Drive Spindle motor power 7.5 – 11 kW This Biesse Selco WN2 was manufactured in 2021. It features a main saw motor power of 7.5-11 kW and can handle cutting lengths up to 4300 mm and thicknesses up to 60 mm. The saw carriage speed is adjustable up to 100 m/min. It includes a PC-based control with a touch screen interface and cutting pattern optimization software. If you are looking to get high-quality sawing capabilities, consider the Biesse Selco WN2 machine we have for sale. Contact us for more information. Application Types Sawing (Wood)

Condition: like new (used), Year of construction: 2008, I sell the throughfeed nesting CNC working centre Biesse Excel NBC 712 X1-S Year 2008. Very productive and fast. Automatic infeed table. Working area 3730x2200mm Configuration: Milling head HSK63 12kW, 1000-24000 rpm, independend Z-axis liquid cooling with the 8 position HSK63 magazine 16+8+4 Drilling heads 1 Grooving saw D.150mm 2-position X/Y 1 Revolving electrospindle with cutting aggregate liquid cooling Software BiesseWorks Advanced + Biesse Nest. CD included. Hfedpfx Afsfwvppsien Pumps 3pcs. BUSCH 3x 300/360 m3/hr. Condition like new ! Fully working. Automatic system of central lubrication and dust collection connections. Complete with safety barriers, Transport elements and CE-points. CE-certyficate and full documents included.

Condition: ready for operation (used), Year of construction: 2019, General Data Measurements depth 5213 mm Main Drive Spindle speed range 12000 Media Power consumption 8 kW / 10 kW Additional Equipment Central lubrication system Hjdpfx Aewzn Dgofijfn Pneumatic glue scrapers Individual dust-hoods for each processing head (100 mm extraction) This Biesse Jade 240 edgebander was manufactured in 2019. It features a robust frame and an intuitive touchscreen control interface. Key capabilities include a high-frequency trimming spindle speed, dual-motor pre-milling, and a comprehensive gluing system with dual-temperature control. Ideal for mid-size shops looking for efficient edgebanding solutions. Contact us for more information about this machine. Application Types Edge Banding

Year of construction: 2001, condition: excellent (used), I sell the Biesse line consisting of: COMIL Insider drilling - milling - grooving - dowel inserting - gluing - accessories inserting line Manufacture year 1999-2001. Possible to sell the machines separately. Vibration loaders and conveyors on agreement. For more photos and details please send the request. Hjdpod Iv H Refx Afisfn

Condition: like new (used), Year of construction: 2019, I sell the edge banding machine Biesse Akron 1440A Year 2019. Configuration: Entry fence servomotoric adjustable Premilling pneumatic adjustable Edge banding servomotoric adjustable Hedpfxow Rl Uto Afisfn / 2 glue tanks for EVA and PUR glue Pressure zone manual adjustable End cutting saw pneumatic adjustable Tilting radius milling servomotoric adjustable Corner rounding unit 2-motor servomotoric adjustable Radius scrapers servomotoric adjustable Glue scrapers pneumatic adjustable Polishing brushes with spraying Hot air fan Separation fluid spraying front Central lubrication system Top feeding rolls Height adjustment servomotoric PUR glue possible 2nd set of premilling heads included in price Material height 10-60 mm Edge thickness 0,4-12,0 mm Feeding speed 18 m/min. Only 360.000 meters edgebanded. CE Mark. Including full documentation and CDs. Very good condition ! Available immediately !