Used Bench Planer for sale (3,765)

Condition: excellent (used), Catalogue number 7640 ADVANTAGES – The best wide planing machine for wet and dry timber – Ideal for processing logs, flooring boards, etc. – 2 planing cutterheads + 3 spindles – Manufactured by the German brand KUPFERMUHLE – Used planer, very good condition TECHNICAL SPECIFICATIONS - Max planing width: 610 mm - Max planing height: 200 mm - From above: - Powered feed roller, toothed - Pawls - Pressure mechanism - 2 powered feed rollers, toothed - Pressure mechanism - 610 mm, 6-knife planing cutterhead, 15 kW - Pressure mechanisms - Smooth outfeed roller - From below: - Side pressure at infeed - Guide rail - Infeed table - Powered feed roller, toothed - 610 mm, 6-knife planing cutterhead, 7.5 kW - 2 smooth feed rollers - Side pressure at outfeed - Rear: Rsdpfoyaq Tajx Aa Djt - 2 side spindles + pressure units: 1) Right vertical spindle 200 mm, 15 kW 2) Left vertical spindle 200 mm, 15 kW - Electrically adjustable left vertical spindle (right/left) - Spindle diameter: 40 mm - Alternate spindle settings - Spindles adjustable: up/down, right/left 3) Additional lower horizontal spindle 160 mm, adjustable up/down and right/left, 5.5 kW - Spindle diameter: 35 mm - At outfeed: 2 upper metal sliding rollers, 2 lower powered rubber rollers - Adjustable rollers in the lower table - Electric height adjustment for planing - 6 feed speeds: 12.8 / 16.3 / 20 / 25.6 / 32.6 / 40 m/min - Feed motor: 8 kW - Extraction port diameters: 2×120, 2x160 mm - Dimensions (LxWxH): 2980 x 1980 x 1800 mm - Weight: approx. 3500 kg Net price: 66,900 PLN Net price: 15,920 EUR (depending on 4.2 EUR rate) (Prices may change with significant exchange rate fluctuations)

Condition: excellent (used), CATALOG NUMBER 7587 Rodpfx Aajyardme Djt Technical data: - Shaft width: 410 mm - Number of knives: 3 pcs - Brake - Table length: 2540 mm - Cast iron tables - Both tables adjustable - Original cast iron fence, angle-adjustable - Motor: 3 kW - Dimensions (L/W/H): 2540x1000x1050 mm - Weight: 730 kg Advantages: – Made in Poland – 3-knife shaft – Used jointer – Very good condition Net price: 7,900 PLN Net price: 1,880 EUR Net price calculated according to exchange rate 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), CATALOG NUMBER 7620 TECHNICAL DATA - shaft width: 410 mm - table length: 2220 mm - cast iron tables - both tables adjustable - original cast iron fence - motor approx. 3kW - dimensions (L/W/H): 2220x800x1140 mm - weight: 504 kg ADVANTAGES – German-made – used jointer – in very good condition Rjdpfx Aajyi Tn Sj Det Net price: 6900 PLN Net price: 1640 EUR based on 4.2 EUR rate (Prices may vary with significant exchange rate fluctuations)

Condition: excellent (used), CATALOG NUMBER 7219 TECHNICAL DATA - Maximum workpiece width: 200 mm - Maximum workpiece height: 150 mm Number of spindles: 4: 1) Bottom horizontal: 200 mm, 5.5 kW 2) Right vertical: 150 mm, 4 kW 3) Left vertical: 150 mm, 4 kW 4) Top horizontal: 200 mm, 5.5 kW - All heads adjustable up/down, right/left - Spindle diameter: 40 mm - Spindle speed: 6,000 rpm From above: - 6 driven infeed, serrated rollers (including 2 double rollers) - 1 driven outfeed, rubber-coated, double roller From below: - Driven, serrated infeed roller, swiveling on lower table - 3 lateral pressure units - Driven, smooth metal outfeed roller - All rollers pneumatically pressed - Infeed table length: 2,130 mm - Table height adjustable - Centralized lubrication - Electric thickness adjustment - Lifting motor: 1.1 kW - Infinitely variable feed speed - Feed motor: 3 kW Rodpfx Aaeyi T Nie Djt - Feed via Cardan shafts - Fully enclosed in soundproof cabin - Extraction connection diameters: 4 x 130 mm - Dimensions (LxWxH): 3,650 x 1,750 x 1,800 mm - Weight: approx. 3,000 kg ADVANTAGES – 4-head configuration – Ideal for both wet and dry wood – Full technical documentation (DTR) – Used machine, in very good condition Net price: 68,900 PLN Net price: 16,400 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (in the event of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), CATALOG NUMBER 7909 TECHNICAL DATA - Max. workpiece width: 230 mm - Max. workpiece height: 130 mm - 6 spindles: 1) Bottom horizontal, 230 mm, 4 kW 2) Right vertical, 130 mm 3) Left vertical, 130 mm (spindles 2 & 3), 7.5 kW 4) Top horizontal, 230 mm, pneumatically adjustable front/rear, 5.5 kW, electrically adjustable up/down 5) Bottom horizontal, 230 mm, 4 kW 6) Trimming saw, pneumatically adjustable up/down, right/left, 2.2 kW - Saw blade diameter: 160 x 40 mm - All spindles adjustable up/down, right/left - All spindles equipped with electric brake - Spindle diameter: 40 mm - From above: 4 infeed traction rollers, gear-toothed including 2 double rollers - From above: 3 outfeed traction rollers, rubber, smooth, including 1 double roller - From below: rubber traction roller, double - Feed by Cardan shaft rollers - Rollers pneumatically pressed - Infinitely variable feed speed up to 25 m/min - Feed motor: 2.2 kW - Working pressure: 6-10 bar - Electric thickness adjustment - Central table lubrication - Infeed table length: 1980 mm - Extraction port diameter: 5 x 140 mm, 1 x 80 mm - Dimensions (L x W x H): 4000 x 1800 x 1700 mm - Weight approx. 3,500 kg Rjdpfoynktcex Aa Djt ADVANTAGES – German-made, WEINIG brand – 5-head configuration – Operator’s manual (DTR documentation) – 6th spindle is a pneumatically adjustable trimming saw – Planer in ideal, very good condition Net price: 53,900 PLN Net price: 12,840 EUR Net price calculated at 4.2 PLN/EUR exchange rate (Price may change in case of significant exchange rate fluctuations)

Condition: excellent (used), WEINIG HYDROMAT 22 AL Four-Sided Planer - Maximum workpiece width: 220 mm - Maximum workpiece height: 130 mm - 8 spindles: 1) Lower horizontal: 220 mm, 5.5 kW 2) Right vertical: 130 mm, 7.5 kW 3) Left vertical: 130 mm, 7.5 kW 4) Right vertical: 130 mm, 5.5 kW 5) Upper horizontal: 220 mm, 11 kW – 5th spindle with electric height adjustment (up/down) 6) Lower horizontal: 220 mm, 5.5 kW 7) Lower horizontal: 220 mm, 5.5 kW – 7th spindle with support + Jointer system (cutterhead sharpening) 8) Universal spindle: 220 mm, 360° adjustable, 7.5 kW - All spindles adjustable up/down, left/right - Spindle diameter: 40 mm - From above: - 6 dual toothed feed rollers + 1 single roller - 3 dual smooth rubber outfeed rollers + 3 single rollers - Meter counter - From below: - Swiveling toothed steel infeed roller integrated in lower table - 3 smooth steel feed rollers - Feed via cardan drive rollers - Pneumatically-tensioned feed rollers - Stepless feed speed adjustment + 2-speed gearbox: 10–60 m/min - Feed motor: 10 kW - Electrically adjustable planing thickness Rsdpfx Aoyyzcmsa Djt - Lifting motor: 0.75 kW - Central table lubrication - Extraction port diameters: 5 x 140 mm, 3 x 120 mm - Machine dimensions (LxWxH): 4680 x 1780 x 1850 mm - Control cabinet dimensions (on pallet): 1020 x 1000 x 2230 mm - Approx. weight: 5,000 kg Feeder with centering device: - Roller width: 450 mm - 1 toothed powered infeed roller - 22 smooth powered rollers - Adjustable upper pressure - Feeder length: 9,020 mm - Stepless speed adjustment: 10–60 m/min - Motor: 0.75 kW - Dimensions (LxWxH): 9,020 x 790 x 1,150 mm Net price: 180,000 PLN Net price: 42,860 EUR (based on 4.2 EUR/PLN exchange rate) (Prices subject to change depending on exchange rate fluctuations)

Condition: excellent (used), CATALOG NUMBER 6575 TECHNICAL DATA - Max. workpiece width: 230 mm - Max. workpiece height: 170 mm - 7 spindles: 1) Lower horizontal, 230 mm, 11 kW 2) Right vertical, 170 mm 3) Left vertical (spindle 2 & 3), 170 mm, 11 kW 4) Right horizontal, 170 mm, 5.5 kW 5) Upper horizontal, 230 mm, 11 kW 6) Lower horizontal, 230 mm, 7.5 kW 7) Universal, 230 mm, rotatable 360°, 7.5 kW - All spindles adjustable up/down, left/right - Spindles 3 and 5 electrically adjustable - ATS system - Spindle diameter: 40 mm - Electric brakes - From above: 4 driven infeed rollers, toothed, including 1 double roller - From above: 1 double rubber driven infeed roller - From above: 1 double rubber driven outfeed roller - From below: 2 metal driven feed rollers, smooth - From below: 1 double rubber driven feed roller - Feed via Cardan shafts - Pneumatically loaded feed rollers - Infinitely variable feed speed: 6-24 m/min - Feed drive motor: 5.5 kW - Electric thickness adjustment - Body lifting motor: 0.55 kW Rjdpfx Aajyyzigj Djt - Central table lubrication - Extraction port diameter: 7 x 140 mm - Dimensions (L/W/H): 5800 x 2050 x 1850 mm - Weight approx.: 4500 kg FEATURES – German-made, WEINIG brand – 7-head planer – Universal spindle – Equipped with ATS – For wet and dry timber – Used planer, in very good condition Net price: 159,900 PLN Net price: 38,070 EUR Net price calculated at exchange rate of 4.2 PLN/EUR (Price may change in case of significant exchange rate fluctuations)

Year of construction: 2017, operating hours: 200 h, condition: used, functionality: fully functional, We are offering this used Marunaka SUPER MECA-S super surfacer / planing machine, year of manufacture 2017. Serial number: 1074 Manufacture date: 02.11.2017 Rated voltage: 380 V Phases: 3 Network frequency: 50 Hz Total power: 2.3 kW Main motor power (continuous): 2.2 kW Main motor speed at 50 Hz: 1,410 rpm Feed speed: 53 m/min Maximum working width: 250 mm Maximum working height: 300 mm Net weight: 430 kg The machine comes with the following optional features: - Increased pass-through height to 300 mm - Pressure roller for wide workpieces - Lateral infeed and outfeed tables - Includes 10 blades at EUR 50 each The machine has seen very little use and is in excellent condition. Rodpfx Asy Hdp Nea Dot If you have any questions or need further information, please feel free to send us a message or give us a call.

Condition: like new (used), Year of construction: 2012, functionality: fully functional, Clamping table, head adjustable by 400 mm, as new, high-performance thread cutting machine up to M10. Rjdpfx Aasy Hdm Ue Det

Condition: ready for operation (used), functionality: fully functional, max working width 500mm max working height 200mm height of side heads 10cm changenable side heads 2-knives shafts roll in the table manual adjustment of side heads two feed speed Rjdpsw Afkyofx Aa Djt additional spindles in the outfeed

Condition: good (used), maximum working width 600 mm maximum working height 200 mm sides – interchangeable heads rollers in the table manual adjustment of side head spacing variable feed speed electric table adjustment multi-blade saw at the outlet with 11 kW motor side heads with 6.6 kW motors each total power 40.55 kW Rsdpfxsw Afivs Aa Det year of production 1991

Condition: as good as new (ex-display), Year of construction: 2025, Double side planer (Double Surface Planer ) extra wide 400 mm Maximum working width 400 mm Maximum working height 200 mm Heavy cardan feed system Special spike feedsystem Unlike the conventional chain drive systems, this machine employs a patented synchronized transmission system along the four fitting columns. Electronic height adjustment Spiral cutterheads top and bottom Rsdpfoy Dpmuox Aa Det Latest generation IE-3 motors Spindle and feed brakes CE

Condition: good (used), Year of construction: 2001, machine/vehicle number: 3060, functionality: unexamined, power: 5.5 kW (7.48 HP), input voltage: 380 V, input current: 13 A, input frequency: 50 Hz, type of input current: three-phase, planing width: 520 mm, number of blades: 4, actuation type: electric, rotational speed (max.): 5,600 rpm, rotational speed (min.): 5,600 rpm, overall weight: 570 kg, Equipment: CE marking, Sicar thickness planer Forte 520, planing width 520 mm, max. workpiece height 300 mm, motor 5.5 kW, 400 Volt, 50 Hz, 4-knife Tersa cutterblock, sold as inspected, ex location Seevetal, subject to prior sale. Rsdpfx Aaey E Rzie Djt

Condition: used, Year of construction: 1980, machine/vehicle number: V 109331, functionality: unexamined, power: 4.8 kW (6.53 HP), input voltage: 380 V, input current: 10 A, input frequency: 50 Hz, type of input current: three-phase, planing width: 500 mm, tool diameter: 125 mm, number of blades: 2, actuation type: hydraulic, rotational speed (max.): 5,000 rpm, rotational speed (min.): 5,000 rpm, total length of planing tables: 2,500 mm, overall weight: 950 kg, Martin surface planer T 51, planing width 500 mm, 2-knife strip cutterblock, infeed table length 1,400 mm, outfeed table length 1,100 mm, straight edge, auxiliary fence, adjustable fence from 0 – 45°, weight approx. 950 kg, sold as inspected, not overhauled, ex location Seevetal, subject to prior sale. Redsy E Rv Tspfx Aa Djt

Condition: used, functionality: unexamined, power: 3 kW (4.08 HP), input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, planing width: 410 mm, number of blades: 2, actuation type: manual, rotational speed (max.): 5,000 rpm, rotational speed (min.): 5,000 rpm, total length of planing tables: 2,500 mm, total width: 410 mm, overall weight: 650 kg, Kamro Abrichthobel AFK 4, planing width 410 mm, infeed table approx. 1280 mm, outfeed table approx. 1200 mm, 2-knife strip cutterhead, motor 3 kW, as inspected at site in Seevetal, subject to prior sale. Rjdpfxsy E Ivwo Aa Dot

Condition: used, Year of construction: 1987, machine/vehicle number: AB-14022, power: 4 kW (5.44 HP), input voltage: 380 V, input current: 9 A, input frequency: 50 Hz, type of input current: three-phase, planing width: 410 mm, number of blades: 2, actuation type: manual, rotational speed (max.): 4,000 rpm, rotational speed (min.): 4,000 rpm, total length of planing tables: 2,000 mm, total width: 400 mm, overall weight: 580 kg, SCM Jointer-Thickness Planer 2000 d.FS Planing width: 400 mm Jointer table: 950 / 950 mm Rjdsxnpn Ropfx Aa Det Cutterhead speed: 4000 rpm 3 strip planer knives Planing height: 3 - 200 mm Feed rate: 4.5 / 8 m/min Max. cutting depth: 8 mm Motor: 4 kW / 400 V / 50 Hz Weight approx. 570 kg As inspected, ex location Seevetal Subject to prior sale

Condition: used, Four-side planer WEINIG P23 - used - 6 spindles Turn-knife system, Profiling device, electric height adjustment, lubricant pump, dust tested ----- Technical Data ----- Planing width: 230 mm, Planing height: 120 mm, Number of spindles: 6, Redjy Dhtyepfx Aa Djt Spindle motor 1: 5.5 kW, Spindle motors 2 + 3: 7.5 kW, Spindle motor 4: 7.5 kW, Spindle motor 5: 5.5 kW, Spindle motor 6: 4 kW, Feed speeds: 5–24 m/min., Extraction connection Ø: 6 x 140 mm, Dimensions (LxWxH): 4,000 x 1,700 x 1,600 mm, Weight: 3,200 kg

Condition: used, Year of construction: 2000, Horizontal Boring Mill Manufacturer: TOS Model: VARNSDORF WHQ 13.8 CNC Redpfex A Ayijx Aa Djt Year of manufacture: 2000 CNC control: Heidenhain 426 Completely overhauled in 2022 Inspection report available Travel (X/Y/Z): 3,500 x 2,500 x 1,250 x B800 mm Number of axes: 5 Table length: 2,200 mm Table width: 1,800 mm Clamping area: 1,800 x 1,600 mm Table load: 12 t Number of tool positions: 60 Spindle taper: SK 50 Spindle diameter: 130 mm Spindle speed: 2,500 rpm Power: 90 kW Heidenhain handwheel Telescopic cover completely overhauled with new wiper Dimensions (LxWxH) approx.: 7,500 x 6,950 x 4,000 mm Weight: 40 t 16426ä

Condition: used, machine/vehicle number: 008403, Max. machinable height: 160 mm Maximum machinable width: 250 mm Max. forward feed speed: 24 m/min Rsdpfsykivhex Aa Dot Operator shafts number: 5

Condition: excellent (used), Year of construction: 1984, Working width 600 mm Planing height 200 mm Jointer table length 2100 mm Number of planer knives: 4 pcs. Feed speed 7 + 14 m/min. Machine weight approx. 1100 kg Redpfxsy Db Rxs Aa Det - Aigner auxiliary fence on the jointer fence - Machine stand in cast iron design - Thicknessing table with 4-way guide - Handwheel adjustment - Bridge guard Location: ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2026, CORMAK Z7016A Vario Bench Drill for Metal – Precision Pillar Drill with Stepless Speed Control The CORMAK Z7016A Vario bench drill is a compact and functional pillar drill for metal, designed for precision drilling operations in professional and workshop applications. Featuring stepless speed control, a robust construction, and versatile equipment, this model ensures maximum control over the drilling process and high work efficiency. Key Features Stepless speed regulation – speed range from 440 to 2600 RPM allows optimal adjustment to the material being processed. Durable cast iron construction – provides high rigidity and reduces vibrations during operation. Adjustable worktable – tiltable from -45° to +45° and height-adjustable via rack-and-pinion system. Laser guide and LED lighting – ensure maximum drilling precision and user comfort. Electronic speed display – enables full real-time control of parameters. 65 mm vice included – the machine is ready to work right out of the box. Construction and Technology The Z7016A Vario bench drill for metal is built on a solid 60 mm diameter column and a rigid 345 × 210 mm cast iron base. The machine’s body and worktable are made from precisely machined castings. The MT2 taper allows a wide range of tool fittings, while the 60 mm spindle travel enables deep hole drilling. With an overall height of just 870 mm, the unit is exceptionally ergonomic and portable. Precision and Performance Thanks to its 500 W (S1) / 650 W (S6) motor, the CORMAK Z7016A Vario pillar drill allows efficient drilling in metal up to 16 mm in diameter. No need for manual gear changes – stepless speed adjustment significantly shortens setup time. The ergonomic three-arm feed handle, depth gauge, and precise spindle guidance system ensure high repeatability and hole accuracy. Applications The Z7016A Vario is a metal bench drill recommended for: Locksmith and repair workshops Maintenance departments Technical schools Small production lines and prototyping facilities Standard Equipment 65 mm vice Laser drilling guide LED work area lighting Electronic speed display Three-arm feed handle Tilting table with rack-and-pinion height adjustment Technical Specifications Parameter Value Max drilling diameter 16 mm Spindle speed range 440 – 2600 RPM Power supply 230 V Spindle taper MT2 Max spindle travel 60 mm Spindle-to-column distance 125 mm Spindle-to-base distance 430 mm Table height adjustment range 300 mm Column diameter 60 mm Table dimensions 200 × 200 mm Base dimensions 345 × 210 mm T-slot width 14 mm Motor power (S1 / S6) 500 W / 650 W Total height 870 mm Rsdpfjxbzuvsx Aa Dst Weight 31.5 kg

Condition: good (used), Stock number: 3030 Manufacturer: Wörner Machine number: 26207 Type / Model: B8 Drilling capacity: up to 10 mm Spindle mounting: Drill chuck Speed range: 780 to 10,000 rpm Stroke: 70 mm Throat depth: mm Table clamping surface: 240 x 220 mm Head adjustment: Machine footprint: 320 x 430 mm mm Total connection: kW Accessories/Equipment: Drill chuck Condition: very good Weight: 120 kg Rsdpfx Aexfa Upea Dst Dimensions with table: 600 x 800 x 1,200 mm Table working area: 560 x 720 mm

Condition: new, Year of construction: 2026, Thanks to its rigid structure, the drill ensures perfect drilling quality. The tilting table allows for a wide range of processing. The device is equipped with an electronic speed indicator and a drilling depth indicator. The set includes a 65mm vice Machine description tilting table -45° to +45°, rigid machine structure, table with height adjustment using a toothed rack, three-arm lever, drilling depth indicator, electronic drilling speed indicator, laser pointer lighting of the working field Technical parameters MAXIMUM DRILLING DIAMETER 16mm RPM RANGE 350-2400 rpm POWER 230V SHANK HOLDER MK2 MAXIMUM SHAFT STROKE 90mm DISTANCE OF SHAFT FROM COLUMN 150mm DISTANCE OF SHANK FROM THE BASE 430mm RANGE OF ADJUSTMENT OF THE TABLE HEIGHT ON THE COLUMN 335mm COLUMN DIAMETER 60mm TABLE DIMENSIONS 240x240mm BASE DIMENSIONS 400x232 mm ENGINE POWER 700 W Rodpfx Aajrif H Eo Dst HEIGHT 910 mm WEIGHT U 46kg

Condition: used, Heavy-duty thickness planer Paoloni S 515 Planing width: 510 mm Planing height: 250 mm Electric height adjustment with 1/10 mm precision for accurate positioning 4-knife safety cutterblock Table with four-point guidance Main motor 4 kW Rsdpfx Aaey A Nruo Dot Feed speeds: 5, 8, 12.5, 19.5 m/min Steel outfeed roller Segmented pressure beam made of solid aluminium Under-table roller Year of manufacture: 1997 CE compliant Machine WORKSHOP TESTED and in VERY GOOD CONDITION Available from stock in Lieboch

Condition: good (used), functionality: fully functional, working width: 230 mm, planing height: 170 mm, spindle diameter: 40 mm, planing width: 230 mm, working height: 170 mm, power of feed motor: 5,500 W, spindle speed (max.): 6,000 rpm, spindle speed (min.): 6,000 rpm, height adjustment type: electric, planer shaft diameter: 40 mm, type of input current: three-phase, number of spindles: 9, power: 95 kW (129.16 HP), input frequency: 50 Hz, Equipment: cabin, Four-sided planer Weinig Unimat 23, lamella machine 9 spindles, grooved bed Working width: 230 mm, working height: 170 mm, Redpfjx Hkp Nsx Aa Dst spindle diameter: 40 mm, feed: 5.5 kW / 6–36 m/min, Spindle arrangement: 1-Bottom (5.5 kW) 2-Right (5.5 kW) 3-Left (5.5 kW) 4-Right (5.5 kW) 5-Top (11 kW) 6-Bottom (5.5 kW) 7-Top (7.5 kW) 8-Bottom (37 kW) 9-Uni (11 kW) 5 driven rollers in the table