Used Belt Saw Machine for sale (71,004)

Condition: used, Year of construction: 1976, Used machine Year of manufacture: 1976 Equipment and technical data: - Underside sanding - Material feed via rubber rollers Gsdpfx Aswpm I Ted Iebp - Non-contact oscillation control - Quick-change pressure beam - Electromotive adjustment of the tool thickness with an easily readable digital display - Push-button control with contactor - Sanding width: 1350 mm - Maximum workpiece thickness: 150 mm - Sanding belt width: 1360 mm - Sanding belt length: 1900 mm - Feed rollers switchable: 10 + 20 m/min - Compressed air connection: 6 bar - Air requirement: approx. 180 NL/min - Motor power: 17.5 kW - Dimensions (W x D x H): 1800 x 1100 x 1520 mm - Weight: 2600 kg Availability: short notice Storage location: 63934 Röllbach

Condition: used, Used machine Condition: consistent with age Gjdpfxsxwz N Se Ad Iebp Table size: 2600 x 900 mm Max. usable grinding length: 2700 mm Belt length: 7800 mm x 150 mm 1100 mm throat on the right Motor: 5.2/7.5 kW with belt air blast nozzle Shipping dimensions: 4300x1650x1800 mm Weight: 1300 kg Availability: short term Location: Röllbach

Condition: used, Year of construction: 1998, Used machine Year of manufacture: 1998 1 wide belt sander with combination unit Equipped with electronic segmented pressure bar For sanding of soft and hard veneers Calibration and fine sanding of solid wood Calibration of workpiece carrier boards Removal of defective veneers and coatings Intermediate sanding of PU, hydro, UV, nitrocellulose, and polyester coatings Sanding of blocking foils With graphical operator terminal NC-controlled thickness adjustment ranging from 3 to 150 mm Calibration roller can be engaged via terminal With patented CSD segmented pressure bar for compensation of workpiece tolerances up to 2 mm Sanding width: 1350 mm Sanding belt length: 2150 mm Sanding belt speed, frequency controlled, approx. 2–18 m/s Sanding unit drive: 15 kW Feed speed: 5/10 m/min Compressed air: 6 bar Compressed air consumption: 15 NL/min Belt blow-off: 490 l/min Extraction connection: 180 mm Air requirement for sanding unit: 1800 m³/h Required air velocity: 20 m/s Total power connection: approx. 17 kW Weight: approx. 2500 kg Gedpfx Aox Rpghjd Isbp Dimensions (W x D x H): 2090 x 1670 x 2020 mm Machine will be supplied with a new feed belt Availability: by arrangement Location: Röllbach

Condition: used, Year of construction: 1984, Used machine Year of manufacture: 1984 Condition: fully checked and serviced Equipment and technical data: - Incl. combination unit with contact roller and sanding pad - With height-adjustable contact roller for calibration - With air cushion pressure shoe controlled by the workpiece - 4-way adjustable grit compensation - With pneumatic belt tensioning device - With rotating structuring brush at the machine's outfeed side - Sanding width: 1350 mm - Sanding belt length: 1900 mm - Pass-through height: 150 mm - Main motor: 15 kW - Feed speed steplessly adjustable 2.5 - 12.5 m/min - With roller table at the infeed - With separate additional structuring brush - With roller table at the outfeed - With digital display unit for the electromotoric workpiece thickness setting - With automatic workpiece thickness adjustment Gbedpfxew R Hh Ue Ad Isp - Extraction ports: 2 x 200 mm - Feed belt is ok; has a defect in one spot (see photo) Dimensions: approx. 2300 x 2000 x 2300 mm Weight approx.: 2500 kg Pictures show the machine in unchecked condition! Availability: short-term Location: Röllbach

Condition: used, Year of construction: 1997, Used machine Year of construction: 1997 Condition: workshop checked Gjdpfx Adow I Ugts Iobp Fitting drilling head Drilling unit 3/4 spindles Clamping cylinder 2 pieces Motor power 0.8 kW Connection 400/50 Volt / Hz Machine dimensions Length 950 mm width 650 mm Height 700 mm Weight 80 kg Availability: short term Location: Röllbach

Condition: new, Year of construction: 2026, New machine Year of manufacture: 2026 Equipment and technical specifications: - Usable WORKING WIDTH mm: 950 - SANDING BELT LENGTH mm: 670/970 x 2150 - MAX. WORKPIECE THICKNESS mm: 160 - STEEL CALIBRATING ROLLER mm: 150 - SANDING PAD WIDTH mm: 50 - BELT MOTOR POWER HP: 10 - BELT SPEED m/s: 18 - FEED MOTOR POWER HP: 0.75 - Variable speed feed conveyor with infinitely adjustable speed, m/min: 4/20 - HEIGHT ADJUSTMENT MOTOR HP: 0.33 - Mechanical BELT OSCILLATION “ECO GEAR PATENT SYSTEM” - 1 pc. DRUM BRAKE for belt braking - Swiveling ROLLER for belt tensioning - 2 pcs. PRESSURE ROLLERS with rubber coating - EMERGENCY STOP BAR at the infeed - ELECTRONIC DISPLAY for workpiece thickness - 2 pcs. ROLLER TABLES each with 2 rollers at infeed and outfeed - 1 EXTRACTION CONNECTION with 160 mm diameter Godpfsy I Eqwox Ad Iebp - AUTOMATIC TABLE POSITIONING BASIC MACHINE ACCORDING TO CE STANDARD PLEASE NOTE: New patented belt oscillation system 1. No valves 2. No light barrier 3. Not sensitive to dust 4. Energy-saving, environmentally friendly system The machine model with this system has been running non-stop since 2008 without lateral belt drift! Including special equipment: 11 kW motor Pneumatic sanding pad incl. feed-synchronized control Location: Flörsheim Availability: short notice

Condition: used, Year of construction: 1983, Used machine Year of manufacture: 1983 Equipment and technical data: with 2 combination units with 2 contact rollers, 1 x 65° Shore, 1 x 85° Shore and 2 air sanding shoes Sanding width 1350 mm Sanding belt dimensions 1360 x 1900 mm Godjy Dkhgspfx Ad Iobp Workpiece thickness max. 150 mm 1st unit with 15 kW 2nd unit with 15 kW Cleaning brush Roller table at the infeed Roller table at the outfeed Infinitely variable feed rate from 2.5 to 12.5 m/min Weight approx. 3700 kg Availability: short-term Location: Flörsheim

Condition: new, Year of construction: 2024, New machine Year of manufacture: 2024 Cutting plane directly on the saw blade Large-sized saw unit made of cast iron, double-mounted on the cast iron table – guarantees stability, precision, smooth operation, and long service life; 6-year HOLZKRAFT warranty on wear of the swivel segments Precision-guided format sliding table made of aluminum, anodized as standard 10-year HOLZKRAFT warranty on wear of the sliding table guide rails Parallel fence as standard with round bar guide and fine adjustment Large work table made of milled cast iron Smooth operation and precise cuts Standard table extension and table lengthening enable easy work with larger workpieces Extendable aluminum telescope fence with angle adjustment and two professional folding fences Made in Italy Motor 4.0 kW - 400 V Saw blade tilt 90 - 45° Format sliding table length 1600 mm Table length 1020 mm Table width 325 mm Cutting width with parallel fence 700 mm Max. cutting height 90° = 100 mm Max. cutting height 45° = 79 mm Saw blade diameter 315 mm Saw blade speed 315 mm Max. crosscut width to the left of the saw blade 1660 mm Scoring saw blade diameter 80 mm Scoring saw blade speed 7600 mm Weight: approx. 276 kg Note! The parallel fence and table extension on the right are not visible in the pictures. Availability: short-term Location: Flörsheim Gbedpfx Aewb Eh Nsd Iop

Condition: used, Used machine Year of manufacture: 1981 Features and technical data: Motor 5.2/7.5 kW, pole-changeable 750/1500 rpm Belt speeds: 11 and 22 m/sec With attached blower motor 2.2 kW (2840 rpm, air flow 2400 m³/h) Table size: 2900 x 1400 mm Usable working length: 2700 mm Table stroke: 320 mm Belt dimensions: 7800 x 150 mm Including pneumatic pressure shoe with belt brake Extraction nozzle: 180 mm Gjdpex H U Nmofx Ad Iebp Air requirement: 2 l/min at 6 bar Weight: 1300 kg Availability: short notice Location: Röllbach

Condition: new, Year of construction: 2024, Exhibition machine Year of manufacture: 2024 Equipment and technical data: Solid German engineering for edging, crosscutting, sizing, miter cutting, etc. - Operation from above with control panel placed at eye level, swiveling, incl. template holder - 7" touchscreen control for electromotive positioning of cutting height, saw blade swivel adjustment, cutting width stop and optionally for the height and side adjustment of the scoring saw. Tool database for 50 saw blades and display of the current speed. - Electromotive height and swivel adjustment - Swivel range of the saw blade from 0 to 47° - APA saw blade quick-clamping system - Speed of main saw blade 3000/4000/5000/6000 rpm - Protective device can be swung away to both sides, protective hood with interchangeable insert wide/narrow for saw blades up to Ø 450 mm - Width stop with cutting width 1250 mm, electromotive - Sliding table with cutting length 3200 mm and locking every 50 mm - Cross slide with support roller and adjustable support extension in both directions. Length stop with mm scale and extension up to 3500 mm with 2 units of adjustable folding stops and 1 unit of end stop, can be used simultaneously as a miter stop, adjustable on both sides, stepless from 0-46° with automatic length compensation and detent for 15°, 22.5°, 30°, 45° - Push-button control with electronic soft start (start/stop) - electronic, maintenance-free motor brake - Cutting length 3200 mm - Cutting height max. 155 mm at 90°, 105 mm at 47° - Cutting width on width stop 1250 mm, electromotive - Length stop on cross slide, extendable up to 3500 mm - Max. saw blade Ø 450 mm, saw blade Ø 400 mm can be lowered under the table - Table size of the cast iron table 1200 x 665 mm - plus table extension 750 x 655 mm - Table extension 1430 x 940 mm - Table height / working height 900 mm - Extraction nozzle 120 mm on the machine body, 80 mm on the protective hood - Motor power 5.5 kW / 7.5 HP - Electrical voltage 400 V / 50 Hz - Sliding table, length and width stop profile anodized Gbodpfjw I Ummox Ad Isp - Machine body and swivel arm powder-coated, color anthracite RAL 7021, cladding sheet, protective hood on top RAL 5000 violet blue, on the machine body RAL 7035 light gray - Space requirement: 7110 x 4150 mm - Weight: approx. 1050 kg depending on the design, up to 1250 kg - CE compliant, GS tested, BG-wood dust tested Special equipment: Incl. scoring unit 0.55 kW, electromotive positioning for the side and height adjustment via LED display and memory function; when the scoring saw is switched on, the unit automatically moves to the set position values; when switched off, the unit automatically moves under the table into a lateral parking position, so that larger saw blades than Ø 350 mm can also be used without removing the scoring saw blades. Incl. THREE-PHASE MOTOR FOR THE MAIN SAW WITH 7.5 KW (10 HP) instead of 5.5 kW Incl. Quickstep scoring system: tool-free manual adjustment of the scoring width from 2.8 to 3.8 mm by step adjustment of 0.05 mm per individual step, incl. 1 set of saw blades 125 x 2.8-3.8 x 50 mm, Z = 12+12 Incl. SWIVELING DEVICE FOR THE CROSS SLIDE: Fast, ergonomic sliding into the parking position Incl. Length stop with digital display, mounted on each stop flap, adjustable to 0.1 mm, length max. 3300 mm Incl. Transport

Condition: used, Year of construction: 2024, Used machine Gbjdpfx Ajxua N Sed Isp Year of manufacture: 2022 Commissioning: 8/2024 As-new condition The heavy-duty worktable made of highly ribbed grey cast iron and the base frame made of welded steel ensure high torsional rigidity and vibration-free operation. Smooth-running and precise sliding table made of anodised aluminium with proven, long-lasting ball contact system on hardened guides, 10-year warranty on guideway wear. Grey cast iron saw unit with permanently precise dual pivot segment guidance and zero-point tilt, 6-year Holzkraft warranty on wear of pivot segments. Equipped with a powerful three-phase motor. Saw blade tilt displayed on a scale at the unit. Large outrigger table with roller facilitates panel handling. Angle-adjustable aluminium telescopic fence with two professional folding stops. Folding parallel fence with quick-release and fine adjustment. Standard features include table extension, table widening, and eccentric clamp. Made in Italy Sliding Table and Worktable: Sliding table length: 2600 mm Sliding table width: 360 mm Sliding table height: 142 mm Worktable length: 840 mm Worktable width: 560 mm Worktable height: 900 mm Saw Unit: Cutting width with parallel fence: 900 mm Maximum crosscut width left of saw blade: 3200 mm Ripping length: 2660 mm Saw blade tilting range: 90 - 45° Maximum cutting height at 90°: 100 mm Maximum cutting height at 45°: 70 mm Note on max. cutting height: Independent of scoring unit Saw blade diameter: 315 mm Note on saw blade diameter: Independent of scoring unit Saw blade speed: 3800 rpm Motor: 5.5 kW The hose visible in the picture is not included in the scope of delivery! Availability: Short term Location: Flörsheim

Condition: used, Used machine Fitting drilling machine Cup band drilling machine Fitting drill (Grass drilling pattern) 6 drilling spindles in series (32 pitch) (one spindle of the 8 drill head is defective) 4 further drilling spindles upstream for cup drillings Pneumatic hold-down stop depth adjustment Connection: 16 A / 380 V Motor: 1.5 kW Weight approx. 100 kg Dimensions: 3,130 x 1,060 x 710 mm Gbsdow I Uwxopfx Ad Iep Availability: short term Storage location: Flörsheim

Condition: used, Year of construction: 2023, Used machine Year of manufacture 2023 Technical data: Sliding table length 3200 mm Cut length sliding table 3200 mm Cutting height at 90° max. 155 mm at 46° max. 105 mm Gbjdsw Nacvopfx Ad Iep Cutting width at rip fence 1250 mm Length stop on cross slide extendable up to 3500 mm Saw blade diameter max. 450 mm Saw blade diameter (retractable under table) ø 400 mm Table size cast iron table top 1200 x 655 mm Table extension plus 750 x 655 mm Table widening 1430 x 940 mm Table height / working height +/- 20 mm 900 mm Motor power 5.5 kW / 7.5 HP Main saw blade speed 3000 / 4000 / 5000 / 6000 rpm Voltage 400 V / 50 Hz Space requirement 7000 x 3500 mm Weight approx. 1150 kg Options: Motor 7.5 kW Tele-Digit length stop With central digital wireless display 0.1 mm in the low-power system for both stop flaps up to 3000 mm instead of the standard length stop Double-sided miter stop DSG A For angle cuts 0° – 90° on the aluminum double sliding table, length and angle measurement adjustable via scale; for cross cutting up to 1375 mm with length compensation for preferred angles 5°, 10°, 15°, 22.5°, 30°, 45°, 60°, 67.5°, incl. splitter wood, wall holder and an additional factor scale for easy calculation of incorrect miters for different workpiece widths Swivel device for the cross slide Quick ergonomic pushing into the park position 2 clamping clamps for sliding table Current list price: 46254.- Availability: short-term Storage location: Flörsheim

Condition: used, Used machine Used Hettisch Blue Max hardware drilling machine Motor power: 0,8 kW Motor speed: 2800 rpm 4 drilling spindles with longitudinal stops one foot switch press-in die missing!!! Gbedpow I Um Tefx Ad Iop Availability: by arrangement Location: Solingen

Condition: ready for operation (used), Indumasch Siegen 362 Grinding Pedestal Belt Grinding Machine Grinder -Belt width: 150 mm -Speed: 1400 / 2800 rpm Gedpeyyn A Hsfx Ad Iebp 220V / 380V -Extraction unit You are welcome to arrange an inspection appointment. We can also organize cost-effective shipping for you! You will receive a proper invoice. For international customers, a net invoice can be issued, provided a valid VAT ID number is supplied. Subject to prior sale. Visit our shop to see our other offers. All company names and trademarks mentioned are the property of their respective owners and are used for identification and product description purposes only. Deviations in technical data or errors in the item description may occur and are reserved.

Condition: new, CATALOGUE NUMBER RE060 - New machine TECHNICAL SPECIFICATIONS - Saw blade diameter ⌀250 – 350/30 mm - Scoring blade diameter (works only with blades ⌀300, 350 mm) ⌀120/20 mm - Main motor power 4 kW - Scoring motor power 0.75 kW - Spindle speed 4000 rpm - Scoring spindle speed 8800 rpm - Blade tilting 0 – 45° - Max. cutting length 1600 mm - Rip fence cutting width 1250 mm - Riving knife ⌀350 mm - Spindle flange diameter 87.5 mm - Table fence set at 90° – 45° angle, accuracy ±1° - Max. cutting height with blade ⌀300 mm: 95 mm - Max. cutting height with blade ⌀350 mm: 120 mm - Upper dust extraction port diameter ⌀80 mm - Lower dust extraction port diameter ⌀100 mm Gbedpfx Aoyvivmod Iep - Weight 480 kg - Machine dimensions (folded) 2020x3380x1200mm Net price: 16000 PLN Net price: 3800 EUR Net price calculated at the exchange rate of 4.2 PLN/EUR (Price may change with larger exchange rate fluctuations)

Condition: excellent (used), Catalogue number 7757 TECHNICAL DATA Milling machine - Spindle diameter: 25mm - Spindle height: 120mm - Interchangeable spindle, tiltable 20 degrees - Spindle locking - Height adjustable (up/down) - Original guide fence - Table dimensions: 1120x750mm - 4 spindle speed settings - Motor: 3.8 kW Circular saw - Max blade diameter: 350mm - Spindle axis: 30mm Gsdpfx Adoy Tudws Isbp - Blade adjustable (up/down and angle) - Spindle locking - Cutting width at fence: 540mm - Cast iron table - Dimensions (L/W/H): 1260x900x1000mm - Weight: 610kg ADVANTAGES – Made in Poland – DTR documentation available – Used milling machine, very good condition Net price: 6900 PLN Net price: 1640 EUR (based on exchange rate 4.2 EUR) (Prices may vary with exchange rate fluctuations)

Condition: used, Year of construction: 2011, BRUSA & GARBOLI NOK 150 Gbedszhxy Nopfx Ad Iep

Condition: used, Year of construction: 2011, BRUSA & GARBOLI LPC 300 WET Gedpszhxycefx Ad Ijbp

Condition: ready for operation (used), Jaespa AS 6 Vertical Band Saw Blade length: min - 4400mm; max - 4600mm Gbjdpfx Aewcp Rkjd Iop Table: 670mm x 670mm Thrust: 620mm Weight: 834 kg Dimensions: 1400mm x 800mm x 2250mm (L x W x H) You are welcome to stop by for a viewing. We are happy to arrange a cost-effective shipping service for you! You will receive a proper invoice. For international customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and check out our other offers. Company names and trademarks mentioned are the property of their respective owners and are used solely for identification and product description purposes. Deviations from technical data and errors in the description of the article may occur and are reserved.

Condition: used, Year of construction: 2007, functionality: fully functional, machine/vehicle number: 2MAZL000283, power of the servo motor: 350 W, input voltage: 230 V, clearance between the columns: 70 mm, type of input current: AC, throat depth: 120 mm, feed length X-axis: 22 mm, feed length Y-axis: 78 mm, feed length Z-axis: 10 mm, pneumatic connection: 6 bar, JUKI MOL-254 – Automatic Belt Loop Attaching Machine High-Speed Denim Production Unit – Video Verified (03/2026) Description For sale is a JUKI MOL-254 automatic belt loop attaching machine, designed for fully automated production of belt loops in jeans, trousers and workwear. This is a specialized high-speed production unit, not a standard sewing machine. The machine automatically feeds, cuts, positions and bartacks belt loops with consistent precision and strength. The unit has been used in a professional garment production environment and is offered as a complete industrial workstation. Video recorded in operation on 05.03.2026 Serviced on 27.02.2026 Godpfx Aey Nd Hgsd Ijbp Production-ready condition Production performance Cycle time approx. 1.2 seconds per loop Up to 2,000–2,500 belt loops per shift Simultaneous top and bottom bartacking Consistent symmetry and reinforcement quality Key features Fully automatic belt loop feeding, cutting and attaching Integrated bartack stitching system Pneumatic material handling system Digital JUKI control panel Adjustable loop size settings Stable performance on heavy fabrics such as denim and workwear Designed for continuous industrial use Includes JUKI MOL-254 machine unit Integrated motor and drive system Pneumatic system Industrial table and stand Operator control panel Thread stand Technical details Manufacturer: JUKI, Japan Model: MOL-254 Type: Automatic belt loop attaching machine Control: Electronic JUKI control system Drive: Industrial motor with pneumatic system Application: Belt loop production Condition Used industrial production condition Fully functional Serviced 27.02.2026 Video proof available Typical signs of use from factory environment Sold as-is, where-is, without warranty Applications Jeans manufacturing Workwear production Trousers production Automated garment production lines Location Valga, Estonia Logistics Buyer responsible for dismantling and transport

Condition: new, Year of construction: 2026, Powerful, reliable and modern semi-automatic band saw for metal with automatic arm raising and lowering. The arm is rotational in both ways. The machine is fantastic for ironworking, e.g. cutting tubes and profiles. Product features CORMAK S-200RH band saw is by default equipped with automatic arm lowering and raising as well as with a precise arm height regulator. Due to an automatic hydraulic damper, the manual handling of the machine has been simplified to feed and clamping the cut material in a vice. The arm made of uniform iron casting, together with a refined, solid and stable construction, ensure S-200R's exceptional rigidity, resulting in failure-free handling and high cutting precision. The innovativeness and production of semi-automatic and automatic series "CORMAK-PREMIUM LINE" band saws, compliant with the norms and standards consistent with ISO:910001 and ISO:140001 certificates, warrant safety, quality and reliability of the product. M3V motors from ABB, a renowned worldwide manufacturer, warrant long-term reliability. As an official and the only representative on the Polish market, we assure that the product is original and provide professional, customised warranty and post-warranty services. Technical data Type - semi-automatic Arm raising and lowering - hydraulic with smooth arm lowering control Band speed - 36/70 mm/min Angled cutting - left to 45°, right to 60° Vice - hydraulic Minimum cutting diameter - Ø 5 mm Minimum material length in vice - 30 mm Vice base height - 780 mm Cutting band dimensions - 27×0.9×2910 mm Total power - 2.1 kW Dimensions (LxWxH) - 1600×800×1400 mm Weight - 530 kg Angle 0º -----ø250 320×240 240×240 45º L ø200 220×120 190×190 45º P ø220 235×120 210×210 Gbsdpei D D A Ssfx Ad Iep 60º P ø110 155×110 100×100 Default equipment Control panel on separate component Built-in hydraulic unit Hydraulic control of arm motion (up – down) with possibility of smooth lowering speed control Arm position memory function (arm returns to a defined height after cutting) Cutting at angles of L/R 45° - 0° - 45° - 60° Brush for cleaning band Cooling system Bi-metal band saw EC Declaration of Conformity User manual The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Year of construction: 2006, condition: new, I sell 12 sets of new saw blades suitable for HOLZMA panel beam saw machines. Gbodpfeg Dvutjx Ad Iep Main saw blade FABA 600 x 5,8 / 4,0 x 60 Z 72 Scoring saw blade AKE 26 200 45H 200 x 4,8 - 5,8 x 45 Z=36 Price totally 1000 Euro. Available immediately.

Condition: like new (used), Year of construction: 2020, For sale: HOUFEK BASSET PBH220 belt grinding machine. The machine is practically unused and in very good condition. It features a robust industrial design, intended for grinding, smoothing, and finishing metal surfaces. The HOUFEK machine, manufactured in the Czech Republic, is characterized by a large work table, a long grinding belt, and precise work table adjustment, making it ideally suited for processing both individual parts and larger structures. Technical specifications: Manufacturer: HOUFEK a.s. Model: BASSET PBH220 Year of manufacture: 2020 Made in: Czech Republic Motor power: 3 kW Grinding belt speed: 17 m/s Vertical work table travel: 540 mm Godpfx Aszff R Nsd Isbp Horizontal work table travel: 700 mm Work table dimensions: 800 × 2200 mm Grinding belt dimensions: 150 × 6400 mm Dust extraction connections: 2 × 100 mm Power supply: 3/N/PE 400 V, 50 Hz Motor speed: 1400 rpm Nominal current: 7 A Protection class: IP54 Weight: 544 kg Advantages: Practically unused Large work table Robust and stable frame Adjustable work table High grinding performance Simple operation Suitable for intensive industrial use Application: Perfectly suited for grinding and finishing metal structures, stainless steel products, welded structures, sheet metal parts, and other metal products. If you have any further questions, we will be happy to answer them.

Condition: used, width of the strips 75 mm band length 2000 mm Gbedpfx Aozhch Red Ijp weight of the machine ca. 90 kg