Used Beading for sale (239)

Year of construction: 2003, condition: good (used), - Fully automatic - For packing bar shaped products - Product height (mm): 19 - 600 - Product width (mm): 600 - 2100 - Product length (mm): 2400 - 5700 - Product weight (kg): 3000 - max. cross-section diagonal (mm): 2184 Bsdpfxshyxfve Aafocu - Brake motor for winding ring drive: controlled by frequency converter - 2 driven roller conveyors: each 3000 mm long for the infeed side of the machine, equipped with brake motor - 2 driven roller conveyors: for the outfeed side of the machine (1 piece 3000 mm long, 1 piece 4400 mm long) executed with brake motor - 1 packing material take-up: for stretch film, crepe paper, PE film etc. - packing material roll width max. (mm): 500 - Automatic gripping, cutting and feeding device: for PE stretch film, in smooth cut version - Electrical device for laying edge protection beads at the beginning and end of the product to be wrapped: preselectable by means of a timer - Electric power pre-stretch system: for PE stretch film with thickness 17 - 50 my - Machine length (mm): approx. 2000 - Machine width (mm): approx. 3400 /3800 - Machine height (mm): approx. 2200 above floor level

Condition: good (used), Year of construction: 2004, Weinig Unimat 23 EL Year of manufacture: 2004 Bodswyulujpfx Aafjcu Working width: 230 mm, Working height: 120 mm 1. Bottom spindle with 7.5 kW motor and spindle brake 2. Right spindle with separate motor, 7.5 kW and spindle brake Speed: 8,000 rpm with high-performance ball bearings, NC-axis with frequency inverter, axial stops milled to 35 mm height 3. Left spindle with separate motor, 7.5 kW, speed 8,000 rpm with high-performance ball bearings, NC-axis with frequency inverter, radial pneumatic pressure guide left for varying workpiece widths up to 200 mm 4. Top spindle with 7.5 kW motor and spindle brake, speed 8,000 rpm with high-performance ball bearings, NC-axis radial Pneumatic axial control, adjustment range 40 mm, glazing bead ejection, pneumatically cycled. - Infeed system with 4 kW motor and infeed brake - Short piece package - UC-Matic package consisting of: PLC control, central motor start, parts monitoring, operator terminal, free-standing control cabinet, free-standing operating panel, magnetic interlock for safety cover - Enhanced sound insulation - Automatic planing and feeding system for different workpiece lengths and widths Workpiece dimensions Length: 400 – 3,500 mm (4,000 mm) Width: 40 – 200 mm Thickness: 20 – 100 mm Powered conveyor belt Belt width 250 mm, conveying length 4,500 mm, additional photoelectric sensor for signal transmitter Weinig Hydro Finish Planing Machine Uniplan 23 Year of manufacture: 2004 Working width: 230 mm, Working height: 120 mm 1. Bottom spindle with 7.5 kW motor and spindle brake, speed 7,200 rpm 2. Top spindle with 7.5 kW motor and spindle brake, speed 7,200 rpm, NC-axis radial - First feed roller cycled with photocells - NC-axis for separate feed height adjustment - Improved sound insulation - UC-Matic package - 2 hydro straight cutter blocks 501 with HSS strip planer knives 30 mm x 3 mm, max. 9,000 rpm, dimensions 163 mm x 230 mm x 50 mm, Z=4

Condition: used, color: white, overall weight: 18,000 kg, empty load weight: 3,000 kg, loading space width: 2,480 mm, loading space length: 7,330 mm, loading space height: 2,460 mm, machine/vehicle number: 1049, BDF steel swap body swap body 7.45 m with roller shutter door, storage container * Swap body / steel body beaded outer wall * Storage container * Roll-up door * Keyhole rails * Screen printing floor, forklift accessible * Telescopic support legs * Storage height 1.02 - 1.32 m * Manufacturer: SICOM * Loading height at roller shutter: 2.27 m Bsdjqgd I Hjpfx Aafjcu * Light rust on frame and body

Condition: like new (used), functionality: fully functional, machine/vehicle number: EFR4AOOS, - Brand: Graco - Reference: EFR4AOOS - UPC Code: 755652866732 - General Industry - Dosing, mixing, measuring, and electronic control system designed for the precise application of single or two-component materials, SEALANTS AND ADHESIVES - Applications: Beads, encapsulation - Maximum flow rate: 3.4 l/min - Maximum working pressure: 241 bar - 80+80 cc stainless steel bases - Pressure ratio: 1:1 - Maximum fluid temperature: 50°C - Fully serviced second-hand product - 1-year warranty - Shipping or in-store pickup available Bodpfx Aexv Dcreafjcu - 21% VAT NOT included - VAT INCLUDED. VAT refund can be requested if the company is registered in VIES or has a TAX ID - Customs duties and import charges at buyer’s expense (Incoterm: DAP)

Condition: like new (used), Year of construction: 2022, operating hours: 100 h, functionality: fully functional, cutting length (max.): 6,500 mm, overall weight: 3,500 kg, type of input current: three-phase, height adjustment type: electric, wheel diameter: 600 mm, total width: 2,600 mm, saw blade width: 40 mm, cutting width (max.): 1,200 mm, saw band length: 5,400 mm, Equipment: chassis, Professional Mobile Bansdsaw, TrakMet TTP600 Premium Fully Hydraulic -Electronic Thickness controller lifting cutting head up / down -Electric adjustment of bands side roller -Hydraulic adjustment of band tension -Electronic longitudinal drive of saw head -6m saw frame/track + 2m subframe. Subframe with folding hinge (transport mode). -Water cooling with electronic controlled valve (release water only when blade is working). -Sawdust collector with electric discharge -Hydraulic control station flexible position for optimal ergonomic working position -Log lifter 2m +1 slidable /flex lift arm/ 5 log support / 2 log clamp / 1 log turner / 1 log- leveling roll/ 1 log leveling roll with drive. -Control Panel flexible / adjustable for best working position, Including. ISP-010 cutting measurement calculator / Amp meter / switch for debarking machine / switch for sawdust collector / Switch for main motor 18,5 Kwa / Switch for water cooling / Cutting speed control, forward and reverse / Main safety Switch. -Board driver (pulling back system for boards -Electric conveyor for board exit from saw bead (working together with the pull back system). -Support legs for individual adjustment 10 units total, 5 on each side. -Chassi with two 1800 kg axels both with brake system. Total weight 3,5 tn gross weight. Road legal 80 Km/h. -Laser -Equipped with programable frequency converter for smooth start and eliminating power peeks Bcjdpoxvtv Uofx Aafou -The saw machine is in absolute mint condition, less then 100 hour on the clock Please reach out for more details, video material, etc. Open to discuss price and logistics

Condition: used, Number of spindles 6 St. Working width 230 mm Working height 120 mm Length of the planing table 2500 mm Feed motor 3 kW Feed speed 5-24 m/min. total power requirement 27 kw Dimensions (L/W/H) 3900 x 2200 x 2000 mm weight of the machine ca. 2500 kg Weinig Profimat 23 four-side planer, window version with glazing bead removal or can be used as a grooving spindle ATS control and program control ----- Machine was factory overhauled by Weinig in 2024. Technical Specifications Summary (Please inquire about any additional accessories included) ----- General ----- > Working width: 230 mm > Working height: 120 mm > Number of spindles: 6 > Planer table length: 2500 mm > Feed motor: 3 kW Bedpfxjxpn T Uo Aafecu > Feed speed: 5-24 m/min > Total power requirement: 27 kW > Dimensions: 3900 x 2200 x 2000 mm > Machine weight, approx.: 2500 kg Spindle arrangement ----- > Spindle 1: bottom > Spindle 2: right, pneumatically timed up-down > Spindle 3: left > Spindle 4: top > Spindle 5: bottom > Spindle 6: pneumatically timed up-down glazing bead saw Spindle Description ----- > Spindle 1: 4 kW, 6000 rpm, 40 mm diameter > Spindle 2: 7.5 kW, 6000 rpm, 40 mm diameter > Spindle 3: 6000 rpm, 40 mm diameter > Spindle 4: 5.5 kW, 6000 rpm, 40 mm diameter > Spindle 5: 4 kW, 6000 rpm, 40 mm diameter > Spindle 6: glazing bead saw 2.2 kW, 6000 rpm, 40 mm diameter Additional Features ----- > Can be used for glazing bead cutting or as a grooving machine > ATS control, automatic 2-axis positioning for width and height (left and upper spindle) with 99-program memory > Machine operation: Window package Joint control of the right spindle and the glazing bead feed via manual selector switch on the control panel > Spindles with mechanical digital display (Technical data according to the manufacturer - no guarantee!)

Condition: used, Number of spindles 8 St. Working width 230 mm Working height 120 mm Weinig Planing and moulding line ----- Consisting of the following individual machines: Bcodpfoxpn Tusx Aafeu Item 1: Weinig Profimat 23 E, four-side planer, stock number: 2803 5 spindles + glazing bead saw Item 2: Weinig Uniplan 23, stock number: 2804 Fine and hydroplaner with 2 horizontal spindles Item 3: Weinig RF 15, stock number: 2805 Longitudinal-cross-longitudinal conveyor with workpiece return to the operator Detailed descriptions of the machines can be found under the mentioned stock numbers. (Technical specifications according to the manufacturer, without guarantee!)

Year of construction: 2007, condition: ready for operation (used), A 4-head welding machine Rotox for window construction is available. Profile height range: 30mm-125mm, max. profile width: 140mm, min. welding length with/without gasket forming unit: 320mm/430mm, max. welding length without/with gasket forming unit: 4000mm/4000mm, min. welding width without/with gasket forming unit: 430mm/500mm, max. welding width without/with gasket forming unit: 3500mm/3500mm, welding bead limitation: 0.2mm-2mm, material: uPVC hollow bar profiles, weight: approx. 3100kg. Documentation available. On-site inspection possible. Expected to be available from the end of 2026. Bcsdpfxjxvru Ns Aafou

Condition: used, Aluminium window production machines for sale. 2 x DGS Emmegi NORMA 400, notching saw GRAULE AS450, 2 x corner press ELUMATEC, copy router ELUMATEC, notching mill RINALDI, punch ANC001FL, glazing bead saw EMMEGI 300s. Bcedpfx Aaoxvaw Ssfsu

Condition: new, Year of construction: 2025, functionality: fully functional, GMF Caliper Complete Set 2,500 mm, 3,000 mm, or 4,000 mm 1.) Base length: 1,500 mm or 2,000 mm 2.) Plus extension: 1,000 mm, 1,500 mm, or 2,000 mm Includes charger and receiver. The robust aluminum measuring rail is ideal for measuring glazing beads. Functionality: For use on doors and large window sashes, the GMF caliper can be safely and quickly extended mechanically up to a measuring length of 4,000 mm. - Automatic detection of extension Accuracy: ± 0.1 mm Resolution: 0.02 mm Measurement transmission via wireless interface to control unit or PC Bedpfx Aaexu Hyqofscu Microcontroller charger for battery pack, 100-240 V input voltage, and power adapter for Euro/UK/US/AUS NOTE: 1.) HECHT receiver software required on the customer's PC – available separately upon request. 2.) Can be retrofitted to HECHT Exenso Comfort length stops from year of manufacture 2016 onwards – available separately upon request. 3.) Can be retrofitted to HECHT DS350 double miter saws from year of manufacture 2018 onwards – available separately upon request.

Condition: refurbished (used), The machine has been professionally disassembled and rebuilt by our team. This is a second-life machine. All metal components have been inspected and glass bead blasted. All wear parts have been replaced. It comes with a new control cabinet. The machine is currently undergoing final assembly at our facility. It is capable of sealing twist-off lids ranging from 40 mm to 100 mm in diameter. Output depends on the type of lid, jar, and product. The machine can be operated with or without steam injection (for vacuum sealing in the jar). Contact us and let us know your requirements. We also have other (larger) machines in stock. Upon your inquiry, we can offer you the appropriate machine for your needs. We also have filling machines and conveyor technology available in our inventory. We look forward to hearing from you. Bsdoxufdbopfx Aafocu

Condition: excellent (used), Year of construction: 2023, Deburring machine for band saw blades model LV60. It removes the residual welding bead. Linear removal movement and manual fixing clamps. Bodpjrzqa Hsfx Aafocu

Condition: excellent (used), Deburring machine for band saw blades IDEAL model SM60 to remove the residual welding bead. Bcedpfoxk Tb Tox Aafeu

Year of construction: 2025, condition: new, A sandblasting cabinet is an enclosed system designed for performing surface cleaning, roughening, or pre-paint preparation on small to medium-sized parts. Unlike large blasting rooms, cabinets are compact and self-contained, allowing operators to work in a controlled, dust-free environment — safely and efficiently. ⚙️ Main Features of a Sandblasting Cabinet Enclosed Working Area: The cabinet is fully sealed. The operator works through glove ports and views the process through a clear safety window. Nozzle (Blasting) System: Compressed air mixes with abrasive material (such as sand, corundum, steel grit, or glass beads) and propels it toward the surface for cleaning. Lighting System: Equipped with bright LED lighting for excellent visibility inside the chamber during operation. Dust Extraction / Filtration Unit: Collects and filters dust generated during blasting, keeping the air clean and maintaining operator safety. Abrasive Recovery System: Used abrasive falls into a collection hopper, is cleaned, and recycled for reuse — making the process cost-efficient and environmentally friendly. Ergonomic Design: Includes features such as comfortable working height, clear viewing window, and foot pedal controls for easy operation. 🧩 Types of Sandblasting Cabinets Pressure Blast Cabinets: Deliver abrasive at high pressure — ideal for removing heavy rust, paint, or scale. Suction (Venturi) Cabinets: Use air suction to draw and accelerate the abrasive — suitable for light cleaning and precision work. Bcodpfx Asxr Awajafeu Automatic Turntable Cabinets: Include rotating tables for even, automated surface treatment of parts. Wet Blasting Cabinets

Year of construction: 2025, condition: new, functionality: fully functional, The Blasting room (also called a sandblasting room or shot blasting room) is an enclosed area designed for cleaning, roughening, or surface preparation of materials such as metal, concrete, stone, or wood. Inside the room, abrasive materials (like quartz sand, steel grit, aluminum oxide, or glass beads) are propelled at high speed using compressed air to remove rust, paint, scale, or dirt from the surface and achieve the desired roughness. Main Components of a Sandblasting Room Blasting Chamber / Room: A steel-structured enclosure with wear-resistant lining to protect the interior walls. Blasting Machine (Nozzle System): Mixes compressed air and abrasive media, then directs it toward the workpiece. Dust Collection System (Filter Unit): Removes airborne dust and maintains clean air inside the room. Abrasive Recovery System: Collects used abrasive material, cleans it, and recycles it for reuse. Operator Equipment: The operator wears protective gear, including a helmet with air supply, gloves, and a blast suit. CODE DIMENSIONS OF SANDBLASTING AREA (L x W x H) mm KO - 1 4.000 x 4.000 x 3.000 KO - 2 6.000 x 3.000 x 3.000 KO - 3 6.000 x 5.000 x 5.000 KO - 4 10.000 x 5.000 x 5.000 KO - 5 12.000 x 5.000 x 4.000 KO - 6 15.000 x 5.000 x 5.000 KO - SPECIAL 27.000 x 18.000 x 9.000 Bcjdpsxr Am Usfx Aafsu

Condition: used, Number of spindles 5 St. Working width 20 - 230 mm Working height 8 - 120 mm Length of the planing table 2000 mm Feed motor 1,1 kW Feed speed stufenlos regelbar 2 - 12 m/min. 1 WEINIG VARIOMAT planer and moulder including multifunction / slotting table ----- Machine will be cleaned and functionally tested before delivery ! Technical manufacturer's description: ----- Working width: 20 - 230 mm Working height: 8 - 120 mm Bjdpfxswugpbj Aafjcu 1st spindle horizontal, bottom ----- Motor with brake: 5.5 kW Diameter 40 mm Speed ??6000 rpm Tool radius 125 - 145 mm Axis adjustment range 5 mm Folding device including rebate cutter MarathonCoating for table insert before and after the 1st lower spindle 2nd spindle vertical, right ----- Motor with brake: 11 kW Common motor with left vertical spindle Diameter 40 mm mm Speed ??electronically adjustable 3000 - 6000 rpm (for 11 kW/15 HP) Tool cutting radius for longitudinal machining 93-232 mm Minimum tool diameter at stop plane: 93 mm Maximum tool diameter behind stop plane: 180 mm Maximum throat depth 45 mm Axially adjustable travel 30 mm Insertion segment, including additional stop lip 125 mm Insertion segment, including additional stop lip 150 mm 3rd vertical spindle, left POWERLOCK/HSK ----- Shared motor with 1st right spindle PowerLock tool holder Shared speed with right vertical spindle Tool cutting radius for longitudinal machining 93-232 mm Maximum throat depth 45 mm Minimum throat depth with tool cutting radius 200 mm: 20 mm Axially adjustable travel under table 30 mm Insertion segment 125 mm Insertion segment 150 mm 4th spindle, horizontal, top ----- Motor with brake: 5.5 kW Diameter 40 mm Speed ??6000 rpm Tool cutting radius 125-200 mm Maximum chamfering depth 30 mm Minimum chamfering depth with a tool cutting radius of 200 mm: 20 mm Axially adjustable range 30 mm Glazing bead removal after the upper spindle 5th spindle, second, horizontal, bottom ----- Motor with brake: 4 kW Diameter 40 mm Speed ??6000 rpm Tool cutting radius 125-200 mm Maximum chamfering depth 15 mm Axially adjustable range 10 mm Machine operation ----- Both axes of all spindles - with the exception of the first lower spindle - are equipped with mechanical digital displays. Central radial adjustment with mechanical digital display of the feed rate along with the pressure in front of the upper spindle. The pressure after the upper spindle can be adjusted separately. Memory function ----- For saving the setting values ??of profiles Tool holder axes and pressure elements before and after the upper tool holder with electronic dual displays: Function: -Saving the setting values ??of the finished profile at the touch of a button under a profile number - When the profile number is selected again, the electronic dual displays show the setting values - By manually adjusting the tool holders and pressure elements, the displays are aligned - 99 memory locations 3 axial CNC-controlled adjustment and positioning of the spindles in conjunction with the memory function. For spindles 2, 3, an...

Condition: used, Number of spindles 6 St. Bcsdeu Su Hujpfx Aafsu Working width 230 mm Working height 120 mm Length of the planing table 2500 mm Feed motor 3 kW Feed speed 5-24 m/min. total power requirement 27 kw Dimensions (L/W/H) 3900 x 2200 x 2000 mm weight of the machine ca. 2500 kg Weinig four-side planer Profimat 23 window version with glazing bead removal, ATS control and program control ----- Machine will be renovated and functionally checked! Technical data summary (please inquire about any additional accessories included) ----- Generally ----- > Working width: 230 mm > Working height: 120 mm > Number of spindles: 6 pieces. > Dressing table length: 2500 mm > Feed speed: 5-24 m/min > Total power requirement: 27 kW > Dimensions: 3900 x 2200 x 2000 mm > Machine weight, approx.: 2500 kg Spindle arrangement ----- > Spindle 1: bottom > Spindle 2: right, pneumatically clocked up-down > Spindle 3: left > Spindle 4: top > Spindle 5: bottom > Spindle 6: Glass bead saw pneumatically up and down Spindle description ----- > Spindle 1: 4 kW, 6000 rpm, 40 mm diameter > Spindle 2: 7.5 kW, 6000 rpm, 40 mm diameter > Spindle 3: 6000 rpm, 40 mm diameter > Spindle 4: 5.5 kW, 6000 rpm, 40 mm diameter > Spindle 5: 4 kW, 6000 rpm, 40 mm diameter > Spindle 6: Glass bead saw 2.2 kW, 6000 rpm, 40 mm diameter Other features ----- > Glazing bead removal > ATS control, automatic 2-axis positioning for width and height (left and upper spindle) with program memory 99 programs > Machine operation: window package Joint control of the right spindle and the glazing bead removal via manual selector switch in the control panel > Spindles with mechanical digital display Option: used planer heads (technical data according to the manufacturer - no guarantee!)

Year of construction: 2010, condition: excellent (used), The Trimmer 2A is a CNC corner cleaning machine for PVC window frames, equipped with 2 interpolated axes and an automatic cycle. When properly configured, it is able to check the dimensions of the workpiece. It is fitted with a 275 mm diameter blade, which allows, through different machining programs, the cleaning of the external corner on various profiles. The Trimmer 2A also features upper and lower units with blades for cleaning the bead seams, as well as upper and lower units with knives for cleaning internal corners. Cleaning of both internal and external corners can be completed using the upper and lower drilling/milling units for cleaning the corners or the gasket seats. The processing units can be programmed independently via a CNC PC, which controls the profile programming and the machine’s operation, in either manual or automatic mode. Bcodpfow Hk T Ujx Aafeu

Condition: used, Nordson Problue 4 Hot Melt Pump Model Problue 4 Bodpewq Sv Eofx Aafjcu Complete with 2 heated hose and dispensing guns, air solenoid & modules Glue bead dispensing tub / storage container Mounted on a stainless steel frame

Condition: excellent (used), SCM T130E Spindle Moulder with Glazing Bead Unit Spindle diameter: 35 mm Total spindle length: 140 mm Bcsdoxbnyrepfx Aafou Variable spindle speed via frequency inverter: up to 10,000 rpm Main motor power: 5.5 kW Unit for cutting glazing bead Unit power: 2.2 kW Electronic spindle height adjustment Electronic fence adjustment 4-roller feed Masterwood Feed speed adjustment via variator CE certified DTR technical documentation Year of manufacture: 2005

Condition: new, Brand new PERRYmix model from HVP 50 to HVP3000 stainless steel conical mixer for gentle powder mixing: - Working volume from 50 to 3000 litres. - Indoor and outdoor enviroment without explosion hazard. Bcjdpfep H Uaqjx Aafeu - Pressure inside the vessel atmospheric. - 1 pc half-circle top cover bolted to the vessel with round feeding inlet equipped with safety mesh and the lid. - 1 pc half-circle top cover bolted to the vessel - Screw agitator suppported by bottom pintle bearing (hard metal), adjusted for quick removal of the screw. - Inner surface grinded / outer surface bead blasted. - Manualy operated rotary slide outlet valve with conical discharge. - FDA gearbox and arm fillings. - Mounted on lugs. Drive: - Separate drives for the auger and arm provide greater protection against overload. - The screw agitator is driven by electric motor via NORD gearbox. - The arm is driven by electric motor via NORD gearbox. Material design: - Parts in contact with the product to be mixed made of AISI 304 / DIN 1.4301 stainless steel (beam, conical vessel, mixing screw, semicircular vessel covers, outlet and hopper). - Carbon steel arm - painted with FDA paint. - NORD gearbox made of carbon steel - panted RAL 7031 Options: - All stainless steel arm. - Tilting half-circle top cover with locking. - Drives and gearboxes for potentially explosive atmospheres. - Pneumatically controlled discharge valve. - Stainless steel legs. (Disclaimer: Attached photos shows improved design of conical mixers with stainless steel arm and tilting half-circle top cover)

Condition: new, Year of construction: 2024, functionality: fully functional, Rusticating machine for wooden artifacts such as bead boards,profiles.joists and floorboards ,with maximum width 40 or 60 cm x 30 cm height. Equipped with integrated 45 mm diameter motor-shaft assembly to ensure maximum rigidity, dynamically balanced brushes at high speed to work vibration-free. The machine consists of two brushing units that are independent of each other; the first unit (steel brush) is used for roughing while the second (silicon carbide brush) is used for finishing.It is possible to vary the degree of rustication by setting the working depth. Bodpoh Auu Ajfx Aafjcu

Condition: good (used), Year of construction: 2011, LAMINA GLUELINE 3200 GL - Year of construction:2011 - Sheet size min.: 500 x 700 mm* - 2x - Sheet format max.:1600 x 1600 mm* - 2x Bsdpfx Aajuvh Rtsfocu - Output:up to approx. 1000 pcs/h - Material types: F, E, B, C, CB, EB and EE flute, 1-piece and 2-piece bases - Glue type: Hot-melt (2-hot-melt valves) - Application type: Bead - Stacking height incl. pallet: all heights possible (delivery specifications)

Condition: new, Year of construction: 2025, functionality: fully functional, Stock machine: Subject to prior sale - Glass bead saw / double mitre saw Exenso DS350 - 3,000 mm for wooden glass beads, glazing bars, profile strips, aluminium trims, etc. Swivel range from 22.5° (internal) to 135° (external) Right-hand head is movable. Saw blade holder Ø 350 mm Working length 3000 mm - Includes 1 central support. Bcedpfow Exaajx Aafou - Pneumatic clamping of the units. - Positioning control Exenso DS3 with touch panel - 15" display in dust-protected monitor housing. - 3-axis control: 1 longitudinal axis and 2 swing axes. - Manual input of cutting data - Processing of data from a cutting list (data records as specified) - Processing of measuring gauge data (wireless GMF caliper) - Ethernet connection 10/100 (TCP/IP) - USB interface - Includes control cabinet, motor and software licenses. 1.2 723.0121 DS/ES saw blade for wood, 2 pcs. 1.3 942.5997 DS Pneumatic feed device, 1 set 1.4 942.5236 DS Combined workpiece clamp, 2 sets 1.5 942.5241 DS350 Grooved table supports, 1 pc. 1.6 945.1022 DOCUMENTATION AND USER INTERFACE DEU or ENG

Condition: new, SAPI high-performance injector blasting cabinet type "T-Rex 140 Double-Power" with integrated cartridge filter system. Combines pressure blasting and injector blasting in one blasting system. A blasting cabinet for all applications! The "T-Rex 140 Double-Power" pressure/injector blasting cabinet can be used either in pressure blasting or injector blasting mode. This allows for even the most difficult blasting work to be carried out. The also integrated injector blasting mode can be used for lighter blasting tasks, saving on expensive compressed air. The blasting mode (pressure blasting or injector blasting) is easily selected using a selector switch on the cabinet base. The compact, combined pressure/injector blasting cabinet has an integrated cartridge filter extraction system. Thanks to the permanently installed filter system, the sandblasting cabinet requires little space and is easily transported using a pallet truck or forklift. The compact design of the blasting cabinet makes it ready for immediate use; all that's required is to connect the compressed air and power supplies and fill it with abrasive. Bodpfx Aasupzmusfscu The integrated cartridge filter extraction system ensures optimal visibility in the blasting chamber. At the same time, optimal abrasive cleaning is achieved, allowing the blasting material to be reused as often as possible. The use of state-of-the-art fan technology results in an extremely low power consumption (0.75 kW), making the injector blasting cabinet extremely economical. Our high-performance injector blasting head (fresh blasting head) creates a high negative pressure and thus achieves high blasting performance, enabling fast, economical work with the vacuum blasting cabinet. The blasting nozzle is made of boron carbide and achieves extremely long service life, even when using corundum blasting media. The pressure blasting head is also equipped with a boron carbide blasting nozzle for maximum service life. A modern, energy-saving LED light is mounted on the cabin roof, protected from dust, to illuminate the blasting chamber. This ensures optimal illumination of the blasting chamber and enables fast, fatigue-free, and economical work. Our sandblasting cabinets are constructed from sturdy sheet steel, allowing for a high load-bearing capacity of the work grid. All SAPI blasting cabinets comply with all current safety standards and are equipped with a door safety switch that immediately stops the blasting process if the cabinet is opened during blasting. Metal blasting media, cast steel, steel grit, chilled cast iron, stainless steel blasting media, corundum, glass beads, plastic granules, vegetable granules, etc. can be used as blasting media.