Used Baz for sale (76)

Condition: as good as new (ex-display), Year of construction: 2021, functionality: fully functional, BOB-Mill M8 Model/Mold Making Engraving and Milling Center in Gantry Construction TECHNICAL DETAILS X-axis travel: 700 mm Y-axis travel: 800 mm Z-axis travel: 330 mm Spindle speed: 27,000 rpm Control unit: Mitsubishi E 80 Spindle nose to table: 110 – 440 mm Door width: 760 mm Worktable size: 800 x 600 mm Table load capacity: 400 kg Number of T-slots: 5 T-slot size: 18 mm T-slot spacing: 115 mm Spindle taper: BT30 12-position tool changer Feed rate: 0–10,000 mm/min Rapid traverse X / Y / Z: 15,000 mm/min Positioning accuracy: ± 0.005 / 300mm Repeatability: ± 0.003 mm MACHINE DETAILS Spindle motor power: 7.5 kW Kwedpfsxv Su Njx Ahvow 3-axis motor power X / Y / Z: 1.5 x 1.5 x 1.5 kW Machine weight: 4,300 kg Dimensions: 2,000 × 2,500 × 2,400 mm

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 600 mm, table width: 750 mm, table length: 450 mm, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 24, TECHNICAL DETAILS Travel X: 600 mm Travel Y: 400 mm Kwodpfx Ahowtq Rajvsw Travel Z: 600 mm Table size: 750 x 450 mm Control: HEIDENHAIN TNC 426 Main spindle speed: 10,000 rpm Magazine positions: 24

Condition: repair required (used), Year of construction: 2001, functionality: limited functionality, Machining Center - Vertical IXION model BAZ 325 year of manufacture 2001 type of control Heidenhain TNC 426 x-travel 600 mm y-travel 400 mm z-travel 650 mm tool magazine 12 pcs table surface area 800x400 mm tool taper SK40 spindle turning speed range 40- 7000 U/min weight of the machine ca. 4 t Z-axe error - needs to be repaired - for parts Kwedpexl Syqefx Ahvsw No tools, no air extractor Offers wanted

Condition: ready for operation (used), Year of construction: 1999, machine/vehicle number: 0-201-25-5219, functionality: fully functional, input frequency: 50 Hz, travel distance X-axis: 4,800 mm, travel distance Y-axis: 1,400 mm, Equipment: rotational speed infinitely variable, No reserve price – guaranteed sale to the highest bidder! Bidding obligates timely collection by the end of August! TECHNICAL DETAILS Travel distances X-axis travel: 4,800 mm Kwjdpfx Ahew Ekkkevjw Y-axis travel: 1,400 mm MACHINE DETAILS Electrical data Supply voltage: 400 V Frequency: 50 Hz Number of phases: 3 Rated current: 53 A Fuse: 63 A Control voltage: 24 V Type of input current: Three-phase EQUIPMENT Continuously adjustable spindle speed Edge processing unit

Condition: used, total height: 1,980 mm, total length: 1,700 mm, total width: 1,080 mm, Empty weight: 1.000 kg - Documentation available: No - CE certificate present: No Kjdpfxsyvf Tas Ahvjww - Drive system: Conventional - X-axis travel [mm]: 400 - Y-axis travel [mm]: 200 - Z-axis travel [mm]: 410 - Table width [mm]: 400 - Table depth [mm]: 175 - Magnet width [mm]: 410 - Magnet depth [mm]: 170 - Max. grinding wheel diameter [mm]: 225 - Max. grinding wheel thickness [mm]: 50 - Transport dimensions: 1700mm x 1080mm x 1980mm (l x w x h) - Transport weight [kg]: 1000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Year of construction: 2021, condition: ready for operation (used), total height: 1,300 mm, product length (max.): 4,500 mm, Pipe Production Line manufactured in 2021. This Bazhou Wanxin machine features a dual-station decoiler, hydraulic shear and butt-welding machine, and a cold saw for precise cutting of pipes. It accommodates round pipes with diameters from Ø16-63.5 mm and offers a feeding speed of up to 120 m/min. Consider the opportunity to buy this Bazhou Wanxin Pipe Production Line. Contact us for further details. Kwedpfxeyhfvle Ahvew • Dual-station decoiler • Function: Passively unwinds the coil • Construction: Dual-station with 180° rotation; manual expansion • Advantage: Fast loading, simple operation • Hydraulic shear and butt-welding machine • Function: Cuts front/rear strip ends, centers, and re-welds • Construction: Manual hydraulic shear with boom; front/rear pressure rollers; front/rear centering rollers; welding device • Cutting method: Hydraulic shear • Pressing method: Double-cylinder press • Welding method: Manual welding • Coil accumulator • Function: Ensures continuous production during strip changeover • Construction: Frame type with movable and fixed frames (incl. feeding device) • Feeding speed: max 120 m/min • Storage speed: max 200 m/min • Stored strip length: 200–400 m • Pinching roller motor: AC 11 kW • Forming and calibration machine • Working height: +850 mm • Main drive power: AC/DC motor 160 kW, 1000–2000 rpm; reducer: gear-hardened; gearbox: spiral bevel gear • Entry/formation: Passive 5-roll straightener; vertical rolls for strip feeding; forming via 7 horizontal + 8 vertical roll stands • Guiding/pressing/deburring/cooling/calibration: 6 horizontal + 5 vertical roll stands; 1 round calibration stand • Round calibration stand: 1 smoothing device; 2 sides with 8 rolls (4 per side); Ø30 mm rolls, 40Cr, quenched/tempered/hardened • Horizontal roller shaft: Ø60 mm, bearing position 55, material 40Cr; surface hardening HRC 50–55 • Vertical roller shaft: Ø40 mm, material 40Cr, quenched/tempered/hardened • Bearing slider: Forged steel 45# • Stand style: Gantry type; opening width 120 mm; horizontal stand clamping adjustable via worm gear • Stands material: Welded, aging annealed • Pinching roller shaft: Ø50 mm, 2 rollers, manual screw adjustment • Guide shaft: Ø40 mm • Deburring knife: 2 pcs (1 in use, 1 spare) • Cooling tank: Included • Cold saw (Type KK-5-50) • Function: Cuts pipes to preset length at line speed • Pipe diameter: Round Ø16–63.5 mm (and corresponding square/rectangular) • Cutting length: 1–6 m • Material thickness: 0.6–2.5 mm • Saw motor: 11 kW AC with frequency inverter • Feeding motor: 2.9 kW servo (Yaskawa) • Drive motor: 11 kW servo (Yaskawa) • Feeding mode: Servo multi-stage speed • Speed following: max 110 m/min • Clamping: Pneumatic • Saw blade: Ø400 mm • Saw reducer: Model KK-80 • Sawing stroke (rack length): 3 mNote • The technical data and descriptions are transcribed from the original order confirmation and are for informational purposes only; they are not binding. Additional equipment • Conveyor track, table, and packing machine • Function: Automatic pipe transfer from mill to table; packages into hexagonal bundles • Roller track length: 16 m • Drive: 1 motor YCT200-4A, 5.5 kW

Condition: good (used), Year of construction: 1998, Surface sanding machine Fabr.ABA Type: ECOLINE 1006 Bj.1998 with Abamatic 1 N.D. Sanding area max : length 1000 mm width 600 mm height 500 mm Magnetic table size : 1000 mm X 500 mm . Paper belt filter, various accessories Further data see data sheet . Complete machine documentation available. Kwodpfsvbb Iyjx Ahvew Machine in good condition

Condition: good (used), Year of construction: 2008, grinding length: 1,250 mm, table length: 1,250 mm, table load: 1,200 kg, table width: 500 mm, spindle speed (max.): 2,600 rpm, spindle speed (min.): 1,000 rpm, overall weight: 9,300 kg, travel distance X-axis: 1,400 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, power: 185 kW (251.53 HP), input voltage: 400 V, space requirement height: 2,870 mm, Equipment: rotational speed infinitely variable, X-axis: grinding length 1,250 mm, travel 1,400 mm Y-axis: distance from table to spindle center 700 mm, travel 600 mm Z-axis: grinding width see note, travel 600 mm Note: The grinding area in the transverse direction (Z-axis) depends on the travel path and the grinding wheel width. Ksdeu Hiq Rspfx Ahvsww Example: Travel path across = 600 mm Grinding wheel width 60 mm = grinding width 660 mm Grinding wheel width 100 mm = grinding width 700 mm See pictures for more technical data

Condition: excellent (used), Grinding range 600 x 460 mm Wheel diameter 250 mm Magnetic plate 500 x 250 mm Kedpfx Ajmmdhrehvsww Misc.accessories MARCELS MASCHINEN CH

Condition: used, Year of construction: 2006, Technical data: Working ranges: X-axis: 1870 mm Y-axis: 400 mm Z-axis: 560 mm C-axis speed: 3000 rpm Max. grinding area: 1700 x 620 mm without table dresser: 1500 x 620 mm Table dressing device, diamond wheel: ø 110 mm Grinding wheel diameter: 400 mm Max. width: 100 mm Grinding wheel bore: 127 mm Distance table to spindle center: 800 mm Table height: 900 mm Max. table load: 2200 kg Weight, approx.: 12,000 kg Equipment: - Siemens SINUMERIK 840D control, OPO12 operator panel - Measuring system - Electro-magnetic clamping plate - Full enclosure - Central lubrication - Mist extraction - Clamping system for automatic wheel change - Coolant unit - Coolant recirculating chiller - Profiling device Ksdpsxzq I Sefx Ahvjww Water treatment system available at additional cost

Condition: new, functionality: fully functional, The filter cells (large), model ELBAZ0124L, by ISI Industrieprodukte for ISI / Elbaron electrostatic oil mist filters. Kwjdeylk Arjpfx Ahvew 2 pieces, new and unused. For example, suitable for filtration in air technology installations and devices such as air conditioning systems, compressors, and paint spraying systems. Time-saving replacement option / temperature resistant up to max. 80°C. Suitable for, for example, ISI / Elbaron RH 2500 DV, RON4D1TR electrostatic filters. Price per piece: €990 net, ex stock, plus packaging costs. All technical information subject to errors and typographical mistakes. We sell exclusively to countries within the European Union.

Year of construction: 2002, condition: ready for operation (used), Main Drive Number of axis 4 This HOMAG Optimat BAZ41/30/K Event was manufactured in 2002. A used CNC processing center with a working area of 3000 x 1050 mm. Consider the opportunity to buy this HOMAG Optimat BAZ41/30/K Event CNC processing center. Contact us for more information. Kwedpfsx D Dvnex Ahvsw Application Types CNC Wood Machining

Condition: ready for operation (used), Year of construction: 2003, number of axes: 4, spindle speed (max.): 18,000 rpm, This 4-axis HOMAG PROFI BAZ20/30/16/V/D was manufactured in 2003. It features a Homatic CNC control, WOODWOP CNC programming, an 18-position disk changer, and a main spindle with a 12 kW three-phase motor. Capable of handling workpieces up to 3000 mm in length and 1400 mm in width, it includes a continuous table with adjustable vacuum clamps. Consider the opportunity to buy this HOMAG PROFI BAZ20/30/16/V/D CNC Wood Machining Centre. Contact us for more information. Ksdpfox D Ribsx Ahvjww • Control/Software: Homatic CNC control; WOODWOP CNC programming system; Postprocessor • Workpiece capacity: • Length 800–3000 mm; Width 350–1400 mm; Thickness max. 70 mm with edge / 80 mm milling • Frieze width min. 120 mm; Weight max. 150 kg • Table/Clamping: • Continuous table (D-table) • Longitudinal console 1 fixed; Longitudinal console 2 manual Y-width adjustment • 8 vacuum clamps 125 x 50 x 100 mm • Working height lower edge of workpiece 950 mm • Unit for moving vacuum clamps on unit carrier with pneumatic extension console (max. 4 clamps per longitudinal console) • Width adjustment (longitudinal console/D-table): Servo drive, per longitudinal console • Stop bolt for top layer overhang: Lifting/rotating device, max. 20 mm top layer, stroke 110 mm, individually selectable, end-position monitored (for manual door placement) • Main spindle: • Speed 1500–18000 rpm (VFD 15 kW), full rated power from 12000 rpm • Tool diameter max. 180 mm (milling) / 200 mm (grinding); Room extraction for all tools/units • Aggregate interface/C-axis: • Pneumatic and swivel drive interface • C-axis with torque drive and 3-point support • Tool changer: • 18-position disk changer for HSK F63; tool weight 6 kg; tool length max. 200 mm • Configurations: 18 x Ø max. 130 mm; or 9 x Ø max. 180 mm + 9 x Ø max. 70 mm; grinding tools Ø max. 200 mm • Changer raisable for traveling pickup (left side) • Units/aggregates (for tool changer unless noted): • Drilling/milling unit, 4 spindles: ER25 up to Ø16 mm shank, protrusion max. 50 mm, speed max. 13500 rpm, unlimited swivel via C-axis • Lock case milling unit, 2 spindles D=16/20: counter-rotating, 12000 rpm, integrated blow-out, unlimited swivel via C-axis • Swiveling saw/drill unit: manual 0–90°, flange Ø30 mm, TK Ø52 mm, prepared for crosscut saw Ø max. 180 mm, drill chuck with Weldon D=10 mm, speed max. 9000 rpm, C-axis swivel • Milling cutter holder D=30 with chip guide: mandrel length 45/80 mm, chip guide plate controlled via C-axis, changer space Ø 140 mm • Flush milling unit: simultaneous top/bottom, edge radius max. R12 mm, min. outer radius ~R5 mm / inner radius ~R30 mm at 90°, scanning top/bottom/side, unlimited C-axis swivel, speed max. 12000 rpm, workpiece thickness max. 50 mm, min. overhang ~35 mm, with narrow feeler shoes • WPL knife head: run-out angle 5°, Ø 70 mm • Gluing/edgebanding equipment: • Drive spindle/V for gluing units: mounted right side of boom; cross slide with Y anti-reb and Z extension stroke; anti-reb spindle with C-axis and electrical/electronic interface; dedicated Z-axis • Gluing unit 4 sides, 90 mm (for main spindle): straight edges with direct glue application; 1 pre-press roller + 1 pneumatic post-press roller (programmable); inner radius min. R40 at 90°; edge height max. 90 mm; veneer thickness 0.4–1 mm; folding pressure zone on main spindle with hot-melt reactivation • Edge hold-down device, manual adjustment • Magazine/pickup: • Pickup space on X-support for interchangeable special unit (e.g.

Condition: ready for operation (used), Year of construction: 1998, Homag Machining Center Genius BAZ20/30/14/D Electronically controlled milling and edge-banding machine, finishing, and drilling center for job-oriented production of furniture parts, solid wood, or similar materials. Base machine: - Heavy-duty machine bed with robust linear guide system. - Tool carrier with linear guide system, ball screw spindle, and digital AC servomotor for Z-axis positioning, travel distance 340 mm - Automatic central lubrication for all drives and linear guides - Designed for the installation of various table versions Controller: Wood Wop 5.0 - Extended Z-axis stroke 500 mm - Extended safety tread mat - Through-feed table B20/30+40/.../D manual - Motorized width adjustment of longitudinal console D-table - Chip conveyor for B../30+40/K - Stop pins for overlay protrusion - Main spindle 12 kW - 70-position chain changer for B20 for HSK 63 F tools - Aggregate interface for main spindle - Power supply interface 220/24 volts - Edge-banding unit for 4 sides for main spindle - Melting unit with granulate container - External automatic 3-way edge changer - Rack change system for aggregates and tools - Rebating pressure zone for main spindle - Flush milling unit for tool changer - Saw and cross-cutting unit for tool changer - Drilling-milling unit with 4 spindles for tool changer - Lock case milling unit for disc changer - Vertical milling unit with depth ring - Sanding unit with air nozzle - CNC programming system Wood-Wop - Post-processor for BAZ - Free-standing control panel Kwedpox Nrk Hsfx Ahvsw Location: Ex works customer site - Immediately available - System must be dismantled by the buyer at short notice

Condition: used, adjustable gear motor, variable speed gear motor, electric motor Kedpfx Ahjcxta Sevsww -Manufacturer variable speed gear units SEW type: S40 -Manufacturer motor SEW type: DFT71C2BAZ -Motor power: 0.37 kW -Speed range: 41-205 rpm -Motor: adjustable -Drive shaft: Ø 25 mm -Construction: B3 angle -Number: 1 piece of motors available -Price: per piece -Dimensions: 560/180/H275 mm -Weight: 30 kg

Condition: used, Year of construction: 2007, machine/vehicle number: 1782385, functionality: fully functional, Schirmer BAZ 1000, year 2007, in very good condition, fully operational, still installed and in working order. Available for inspection at any time, as it is currently operating in the factory. Kodpfxox Ecb Se Ahvsww

Condition: new, Sick MICS3-CBAZ40PZ1P01 Id. 1092720 microScan 3 Pro safety laser scanner SN:21490928, unused in opened original packaging, 100% functional, scope of delivery as shown in the photos. Kwjdpsx Eumvsfx Ahvew

Condition: new, Year of construction: 2025, functionality: fully functional, CCT1600L A-M Pressure tester for cylinder head and block – new machine. Hydraulic tray lifting, motorized tray rotation. Technical details: Max. cylinder head capacities: Lenght x Width x Height: 1350 x 425 x 300 mm Capacity of stainless steel tank: 500 liter Heating elements: 2 x 4,5 kw Hydraulic tray lifting Motorized tray rotation Hydraulic hoist: 0,75 kw Gear-motor: 0,25 kw Up and down travel time: 600 mm in 10 sec Thermostat: 0-90°C Power supply: 16kva-3x230v-ac-50/60hz Net weight approx: 600 kg Space requirements: Lenght x Width x Height: 2100 x 1050 x 1700 mm Kedpfx Aencd Ecjhveww If you are interested, please contact me! More machines for sale: Berco, Comec, Sunnen, Carmec, Kwik-Way, Serdi, PEG Valve grinder, head and block resurfacer, valve seat milling, pressure tester, parts washer machines

Condition: used, Keba central processing unit - removed from Engel ES 500/150 HL - removed from running machine - fully functional Kodperr Ehxjfx Ahvsww manufacturer: Keba type: CU 211/A spare part no.: 22 manufacturer no.: 21876 Dition: gebraucht

Condition: used, Year of construction: 2000, machine/vehicle number: 25019, functionality: fully functional, Cutting and processing center STUERTZ STBAZ-IPT 40000-S-V Used, year of construction 2000 Fully automatic CNC sawing and processing center for PVC plastic profiles, mechanically in very good condition for this age. Sawing, processing, screwing reinforcement, drilling through steel reinforcement, label printing. Kjdpfsw Edyfsx Ahvoww Database with Gealan, Rehau and Aluplast profiles Documentation, additional photo and video available. We can carry out installation and commissioning.

Condition: used, Year of construction: 2005, dimensions of table 700 x 400 mm clamping surface 330 x 580 mm 3 t-slots 12 mm travelling distance approx. 400 mm scale 0.05 mm 1 turn of spindle = 4 mm pivoting 360° with locking device Kwodocw Tqkopfx Ahvow height of construction 195 mm max. load of table approx. 100 kg max. operating pressure approx. 500 kg space required length - 850 x width - 400 x height - 195 mm weight approx. 172 kg originally packaging - year of manufacture estimated *- new - unused -* *- 1 unit on stock - *

Condition: good (used), - taken from machine HOMAG BAZ - F4 7,5kW Kwodpfoia Nvzjx Ahvjw - F4 2,2kW - F4 4kW - F5 1,5kW

Condition: used, functionality: fully functional, Ferwood Code: AGG0073 - Manufacturer Code: 1-056-11-0660 - Condition: Used - Functionality: Fully functional - Compatible Machine: CNC HOMAG BAZ - HOMAG CENTATEQ - HOMAG BOF - WEEKE - Weight: 10KG - Dimensions: 46x39x27 - If interested, we offer an overhaul service; please contact us. Kwedpfjyrpxxex Ahvjw

Condition: used, functionality: fully functional, Ferwood Code: AGG0073 - Manufacturer Code: 1-056-11-0660 - Condition: Used - Functionality: Fully functional - Compatible Machine: CNC HOMAG BAZ - HOMAG CENTATEQ - HOMAG BOF - WEEKE - Weight: 10KG - Dimensions: 46x39x27 - If interested, we offer an overhaul service; please contact us. Kodpoyrpw Iofx Ahvjww

Condition: used, Year of construction: 2020, functionality: fully functional, machine/vehicle number: WT 1104, total height: 3,421 mm, total width: 4,704 mm, total length: 9,550 mm, load capacity: 200 kg, construction height: 3,421 mm, Vacuum Turning Portal for Panels The turning unit offers two different "automatic" operating modes: I. Component is conveyed without rotation The component is only shifted laterally, aligned to the reference edge (zero line) of the machining center, and then fed further to the CNC machining center (BAZ). II. Component is conveyed with rotation The component is shifted laterally and rotated along its longitudinal axis before being fed further to the CNC machining center. Each function can also be manually controlled in "manual" mode. SPECIFICATIONS: Max. panel dimensions: LWH: 8000mm x 2500mm x 100mm Max. weight: 200kg Min. panel dimensions: LWH: 1500mm x 1500mm x 12mm The turning portal is equipped with a total of 24 vacuum suction cups, ensuring gentle handling of the panels. The panels are always lifted via suction, then either moved horizontally to the zero line of the machining center or additionally rotated 180° en route before being delivered to the reference edge. The rotational movement is monitored via absolute encoders; the lateral positioning is controlled by adjustable photoelectric sensors. Vacuum is generated by a blower. The roller table, measuring 8500 mm x 4300 mm with roller diameter 108 mm, is fitted with material-friendly rubber rings and is driven by a SEW gear motor. Control of the roller table is via frequency inverter, adjustable speed up to 45 m/min. GENERAL INFORMATION: The entire area is enclosed by fencing; the longitudinal side of the system is secured by two sliding doors, which are safety-monitored. An operator touchpanel (12") is integrated into the fence area. The installed PLC (Siemens S7-1500) is programmed with three modes: • Automatic operation • Manual operation • Maintenance operation Input signals, loading side: – Start roller table – Rotate yes/no – EMERGENCY STOP complete system Input signals, unloading side: – Start roller table – EMERGENCY STOP complete system System output signals: Ksdpsyta R Uofx Ahvsww – EMERGENCY STOP complete system – Panel infeed confirmed