Used Baz Horizontally for sale (6,318)

Condition: new, 400 kN stroke length max. 285 mm working feed 9 mm/sec return speed 20 mm/sec 660x1250 mm work height max. 930 mm toolpiece height max. 250 mm total power requirement 4 kW 200x26 mm bending capacity max. - round 60x5,0 mm Domestic equipments: - semi-automatic NC control (99 programs with 16 steps each) - incl. bending bolt (without punch) - Incl. tool holder for dies - incl. foot pedal Hnjdpfx Agsy H N Nho Iel

Condition: new, 800 kN stroke length max. 285 mm working feed 10 mm/sec return speed 20 mm/sec 750 x 1430 mm work height max. 940 mm total power requirement 4 kW bending capacity max. - flat 300 x 32 mm bending capacity max. - round 89 x 4,0 mm Domestic equipments: - semi-automatic NC control (99 programs with 16 steps each) Hodpfxey H N Nbo Ag Ionl - incl. bending bolt (without punch) - Incl. tool holder for dies - incl. foot pedal

Condition: used, Year of construction: 2022, machine/vehicle number: 246/22, feed length X-axis: 2,000 mm, feed length Y-axis: 300 mm, feed length Z-axis: 300 mm, rotational speed (max.): 18,000 rpm, overall weight: 5,000 kg, Designation: Fanum TRIO SP 2W30 Weight: approx. 5,000 kg Number of spindles: 2 Axes: X-axis (width): 2,000 mm Y-axis (length): 300 mm Z-axis: 300 mm Spindle data Hnjdpfx Asy H I Tlog Isl Spindle type: ES789 Spindle power (S1/S6): 15 / 18 kW Max. speed: 18,000 rpm Spindle interface: HSK A63 Tool holder: ER32 / ER40

Condition: good (used), Year of construction: 2004, functionality: fully functional, Control: Siemens 840 D Travel distance X-axis: 1,000 mm Travel distance Y-axis: 800 mm Travel distance Z-axis: 800 mm Tool changer: 80-fold Tool holder: HSK 80 Max. tool weight: 25 kg Max. tool length: 500 mm Max. tool diameter: 228 mm Spindle speed up to: 6,000 rpm Hnsdpfxoy Nzh Ue Ag Iel Pallet dimensions: 630 x 630 mm

Condition: new, Horizontal bending machine Fastech FP 40 Description - Pressure: 40t - Stroke: 285mm - Max. tool height: 250mm - Flat bar over high edge: 200 x 24mm - Working speed: 10,0mm/sec - Return speed: 10,0mm/sec - working height: 930mm - table: 660 x 1250mm - total power requirement: 4,0kW - Motor: 400 Volt 50Hz - weight: 1100kg - dimension L-W-H: 1250 x 650 x 1250mm - Oil capacity: 40,0l Equipment: - Hydraulic horizontal bending machine - Solid working surface made of stabilized steel Hodpfjfg Eu Rex Ag Isnl - Machine made of hardened and ground forged steel - Digital display for stroke adjustment - 1x set of tools - Double foot switch

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 80-4310-0003, travel distance X-axis: 730 mm, travel distance Y-axis: 730 mm, travel distance Z-axis: 800 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, torque: 245 Nm, controller manufacturer: Fanuc, controller model: System 16 iM, workpiece length (max.): 600 mm, workpiece width (max.): 300 mm, workpiece height (max.): 600 mm, overall weight: 17,000 kg, spindle speed (max.): 9,000 rpm, operating hours of spindle: 16,000 h, spindle nose: 350, number of spindles: 1, number of slots in tool magazine: 89, mount diameter: 100 mm, tool weight: 20,000 g, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Further detailed information can be found in the attached documents and photos. Sale price upon request, price negotiable. Hjdoy Nm E Sjpfx Ag Ienl

Condition: ready for operation (used), Year of construction: 2010, number of axes: 4, This 4-axis HOMAG BAZ 211/40K was manufactured in 2010. It features a vacuum clamping system with multiple configurations, a powerful vacuum pump, and a Flex5+ sawing, milling, and drilling aggregate. The machine is equipped with three tool changers and an edge banding package for enhanced processing capabilities. If you are looking to get high-quality CNC wood machining capabilities, consider the HOMAG BAZ 211/40K machine we have for sale. Contact us for further details. • Vacuum clamping system: 8x 120x50 mm (0/90°) K-Table • Rotating vacuum clamping system: 8x 125x75 mm (360°) K-Table • Vacuum pump: Reinforced 100/140 m³/h • Aggregate: Flex5+ sawing, milling, and drilling aggregate for tool changer (WZW) Hnedsy Hrr Espfx Ag Ijl • Tool changers: 3x tool receivers for Flex5+ (WZW) • Edge banding package: Power EDGE 360° for BAZ 211/311 Venture • Edge processing: Workpiece edge blow-off nozzle • Milling/Scraping: Combination flush milling and scraper aggregate (WD 60 mm) • Profile blades: 2x for scraper • Radius cutter head: 2x WPL radius cutter head • Material handling: Tool transfer station for B200/300/K • Software: Upgrade to woodWOP 6.0

Condition: good (used), Year of construction: 2006, functionality: fully functional, CNC MACHINING CENTER WITH EDGE BANDING UNIT AND ASSOCIATED POST-PROCESSING AGGREGATES. Technical Data: Working dimensions: + X-axis: 3,050 mm for single setup + X-axis: 900 mm for pendulum operation + Y-axis: Milling up to 1,220 mm with 25 mm tool diameter Edge banding up to 1,220 mm All aggregates up to 1,170 mm Workpiece thickness up to 60 mm with standard clamp 6 workpiece consoles for a tubeless vacuum system 4 workpiece stops in X-direction, integrated into the machine frame, for large workpieces 6 workpiece stops in the X-direction, one each integrated in the console 1 workpiece stop each on the left and right in the Y-direction 4 lifting rails for easy positioning of heavy workpieces LED positioning aid for easy placement of vacuum cups and consoles Aggregate equipment: Milling spindle 11 kW, HSK F63 Speed range 0 - 18,000 rpm Hnodpsy Hrh Tsfx Ag Iel Liquid cooling C-axis for use with processing units, with torque support and 3-point stabilization 12-position tool changer magazine Drilling head with 17 vertical spindles Spindle pitch 32 mm Air nozzle for cleaning workpiece edges Exchangeable edge banding unit for 360-degree edgebanding work With single-roll magazine With granulate feed Edge thickness up to 3 mm Adapter aggregates: + Horizontal boring head in cross-head design + Lock case milling unit, 2 outlets + 90-degree sawing unit + Swiveling drilling/sawing unit + Combination unit for radius milling / scraper blade Control system: POWERCONTROL with: WOOD WOP AV license WOODWOP

Condition: used, Year of construction: 2006, Technical details: x-travel: 800 mm y-travel: 800 mm z-travel: 800 mm turning speeds: 12.000 1/min tool taper: SK 50 control: SIEMENS 840D shopmill tool change unit: 240 fach size of pallet: 630 x 630mm mm spindle: 52 kW / 430Nm total power requirement: 87 kVA weight of the machine ca.: 15 t horizontal machining center, NC-round-table pallet-changer (2 pallets), Internal Coolant Supply 40 bar, prepared for Infrared Touch Probe Renishaw MP 10 without probe, Hnodopumdcopfx Ag Ijl tool-breakage control (mech.), MQL, airblast through spindle, oilmist suction, TRANSMIT funbction, accuracy package, mode 4, glass window right door, incl. FASTEMS FPC 1000 pallet pool for 14 pallets, incl. setting up station, control, and 10 pallets approx. 98.500 h main switch on apprax. 45.500 Spindle hours *

Condition: good (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 810 mm, spindle speed (max.): 6,000 rpm, number of spindles: 1, number of slots in tool magazine: 150, Used Okuma MA-600HB Horizontal Machining Center Year: 2008 Spindle cooling Max. 6000 rpm Z- 810 mm X- 1000 mm Y- 900 mm Tool magazine for 150 tools 1 spindle 4 axes 10-pallet system We have 2 units available. Price is per unit, ex location. Hedpjyrf I Ajfx Ag Ijnl

Condition: good (used), Year of construction: 2008, travel distance X-axis: 1,000 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 810 mm, spindle speed (max.): 6,000 rpm, Used Okuma MA-600 HB horizontal machining center, year 2008, including turncut function, spindle cooling, 6000 rpm. Travels: Z-810 mm, X-1000 mm, Y-900 mm. Tool magazine for 150 tools, 1 spindle, 4 axes, 6-pallet changer function. Hnodjywicvjpfx Ag Iel

Condition: excellent (used), OSP P200M Control Hedpfxjy Hqv No Ag Ienl Working travels 1000 x 1000 x 900 mm Tool changer with 200 Positions Spindle speeds 50- 12'000 rpm Spindle taper SK50 6 paletts 630 x 360 mm B-axis Table 360 ° Cooling through spindle Tool breakage control Clamping cubics 3D measuring taper Chip conveyor Misc. accessories MARCELS MASCHINEN AG

Condition: used, Year of construction: 2008, Technical details: Hjdpfx Asw Ng D Tog Isnl pressure: 6 t stroke: 1020 mm total power requirement: 3,5 kW Can only adjust between tips *

Condition: good (used), Year of construction: 2014, functionality: fully functional, Travel X-axis: 1,050 mm Travel Y-axis: 920 mm Hodpjy Nkphefx Ag Ionl Travel Z-axis: 990 mm Distance pallet surface to spindle center: 75 - 995 mm Distance between pallet center and spindle head: 150 - 1,140 mm Pallet size: 630 x 630 mm Max. table load: 1,200 kg Spindle speed: 45 - 15,000 rpm Tool holder: HSK 100 Tool stations: 60 Max. tool weight: 20 kg

Condition: reconditioned (used), Year of construction: 2002, operating hours: 44,590 h, functionality: fully functional, pressing force: 200 t, filling opening width: 1,020 mm, filling opening length: 2,000 mm, bale width: 1,100 mm, bale height: 1,100 mm, oil tank capacity: 3,100 l, power: 150 kW (203.94 HP), year of last overhaul: 2025, Technical data baler: Manufacturer MACPRESSE EUROPA S.R.L. Typ 112 Year of construction 2002, partially refurbished in December 2025 Operating hours 44,590 hours, stand December 2025 Hnsdpfx Agjx Dnb Ue Iel Press power main press 200 tons Specific press capacity 16,5 kg/cm² Feed channel 2,000 x 1,020 mm Filling volume 2,65 cm³ Theoretic throughput rate 795 m³/h Bale size 1,100 x 1,100 mm, length variable Driving motor 2 x 75 kW Tying system 5-fold horizontal, full automatic Throughput rate at MSW approx. 48 up to 54 tons/h, depends on material Volume hydraulic oil tank 3,100 l Machine weight baler approx. 50,8 tons Scope of delifery: 1 piece baler MACPRESSE, type 111A 1 operating manual with CE declaration, electrical and hydraulic circuit diagram Comments: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Hydraulic oil tank emptied and cleaned • Oil and air filters replaced • New hydraulic oil filled • All hydraulic hoses replaced • Press ram dismantled, broken down into individual parts, mechanics made operational • Front two main rollers replaced • Knives on the press ram replaced • Main hydraulic cylinder dismantled, disassembled, cylinder tube and piston rod checked, complete seal set replaced • Counter knife in the frame replaced • Knife gap adjusted to approx. 3 mm • Upper steel guide rails in the frame on the left and right replaced. • Worn press base cut out, base plate replaced with wear-resistant HARDOX steel. • Binding and twisting unit dismantled, broken down into individual parts, mechanics made functional, all twisting shafts and ball bearings replaced. • All wire rollers in the needle heads replaced • Wire knives cleaned and readjusted, chains greased and tensioned • All wire deflection rollers made operational • All door contact switches replaced • Wirbulator device dismantled, disassembled and made operational • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode, see our video for the machine function test. The documentation (BA, CE, electrical/hydraulic circuit diagram) is complete. Viewing is possible by appointment. We accept no liability for the technical specifications or any errors.

Condition: used, Year of construction: 2001, Cutting width: 3300 mm Cutting length: 3350 mm Weight: approx. 4000 kg Saw blade projection: 100-(115) mm Saw carriage: Feed speed: 100-(130) m/min. Return speed: 100-(130) m/min. Main saw blade: 400-(430) mm Motor: 7.5-(11-13.2) kW Scoring unit: 215 mm Motor: 2.2 kW Pusher: Rapid feed: 160 m/min. Return speed: 60 m/min. Extraction: Air speed: 30-35 m/sec. Extraction nozzle: 200 mm / 115 mm Compressed air: Pressure: 5-6 bar Consumption: 20-30 l/min. Storage location: Nattheim Hjdpfx Ajvvkqgjg Ionl

Condition: new, Year of construction: 2026, functionality: fully functional, Versatile hamburger, hot dog bun, roll-bread, panini and etc slicer-cutter. Available cut options: full cut, partial cut, two sided cut (butterfly). Suitable for products with dimensions: width up to 150mm, height up to 80mm. Adjustable cut height and width, adjustable conveyor and cutting speed. Capacity approx 100pcs/min. With castor wheels, fully stainless steel, CE, made in Europe Condition brand new, with warranty, ready on stock for shippment. Hnedpfx Aeinwg Isg Isl

Condition: used, Year of construction: 1996, functionality: fully functional, machine/vehicle number: 123426, travel distance X-axis: 1,200 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 800 mm, controller manufacturer: Siemens, controller model: Sinumerik System 800 - 840C, workpiece weight (max.): 2,000 kg, table width: 630 mm, table length: 800 mm, overall weight: 24,000 kg, spindle speed (min.): 10 rpm, spindle speed (max.): 2,300 rpm, spindle motor power: 22,000 W, number of spindles: 1, number of slots in tool magazine: 161, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, We are offering this used Dörries Scharmann Solon 2 DBF horizontal machining center, year of manufacture 1996. Manufacturer: Dörries Scharmann Model: Solon 2 DBF Year of manufacture: 1996 Condition: used Category ID: 1289 Type ID: 4161 Machine type: horizontal machining center Hnedpoyu Srtofx Ag Ijl If you have any questions or require further information, please feel free to send us a message or give us a call.

Condition: excellent (used), Continuous horizontal press, to compact and pack materials such as cardboard, paper, plastics and others. IMABE IBERICA brand, pressure 125TN, loading mouth 1800 * 1000mm, with blades on the top of the compaction carriage that allows cutting the excess material above the compaction tunnel. Hnodpsv U R Agofx Ag Iel Folding compaction tunnel, both at the top and on the sides, for greater retention of the material, outlet for bullets of dimensions 1050 * 1100mm and adjustable length. Automatic tying system, lateral, by 5 wires, for high production 30-35ton / hour. Fully rebuilt and revised in 2019

Condition: excellent (used), Year of construction: 2016, pressing force: 80 t, DIXI 80 SLD horizontal press Semi-automatic press system with 80 tons of pressure for economical volume reduction of residual materials (recyclable) in industry and retail: Cardboard Tetra packs Films Foams PET bottles Hjdpfx Aoy Iykxeg Isnl Insulating mats and other compressible materials. Pressure force : 80 t Electrical connection : 400 V 50 Hz; 11 kW; D-32 A (option: K-32 A) Cycle – average approx. : 35 sec Length approx. : 4,320 mm (without lifting device and pallet) Width approx. : 1,830 mm Height approx. : 2,620 mm (with hopper) Loading opening (WxD) – housing : 1,040 x 1,110 mm Bale dimensions : 1,120 x 1,120 x 1,200 mm Bale weight approx. : 500 – 600 kg Tying 4 manual, wires with quick-release eyelets Machine weight approx. 8,000 kg (without bale)

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, pressing force: 40 t, bale weight: 370 kg, HSM HL 4010 Re / Li horizontal baler. Equipped with a loading tipper for the basket. Manufactured in 2015. Very good condition - regularly serviced by an authorized service center. Ready for use. Available for binding with wire, string, or polypropylene tape. Semi-automatic baler system with a 40-ton pressure for economical volume reduction of residual (recyclable) materials in industry and retail: Hsdpfxey Iyd So Ag Ionl Cardboard Tetra packs Films Foams PET bottles Insulation mats and other compressible materials. Press force: 400 kN Transport width: 1,767 m Transport height: 2,489 m Transport length: 5,573 m Weight: 4,500 kg Drive power: 7.5 kW Bale weight (depending on material): 300-350 kg Bale length x width x height: 750 x 1200 x 750

Year of construction: 1990, condition: good (used), Make: Fuji Hsdpfx Agsfx Sqgs Ijnl Type: automatic packaging machine Model: FW-3400 Year of construction: 1990 Frame: steel, lacquered Dimensions: L x W x H = 4.500 x 1.100 x 1.600 mm Product width: max 140 mm Product height: max. 60 mm Product length: 80 - 350 mm (range cut length) Capacity: 20 - 300 packages / minute Other: foil width up to 430mm separate mobile transformer cabinet digital display with controls English documentation as-is or adjusted to customer needs

Condition: used, Year of construction: 2011, operating hours: 34,300 h, functionality: fully functional, machine/vehicle number: 1190 000077 3, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, controller manufacturer: Siemens, controller model: Sinumerik 840D, workpiece weight (max.): 1,200 kg, total height: 3,100 mm, total length: 4,850 mm, total width: 4,350 mm, table width: 680 mm, table length: 680 mm, rotational speed (max.): 10,000 rpm, overall weight: 16,000 kg, spindle speed (max.): 10,000 rpm, operating hours of spindle: 13,400 h, coolant supply: 40 bar, input voltage: 4,000 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, DMG MORI DMC 80H duoBLOCK – 4-Axis Horizontal Machining Center with Pallet Changer – Used For sale is a used horizontal machining center, model DMG MORI DMC 80H duoBLOCK. The machine is currently still in productive operation and is reliably used for series production. It is primarily utilized for machining steel and cast materials. Hnsdpfxjy Iwdpj Ag Iel Condition: Fully functional and ready for operation. Inspection under power possible by appointment. Equipment: 4-axis machining Horizontal design for efficient chip evacuation Pallet changer to minimize non-productive times DuoBLOCK construction for high stability and precision Tool changer Spacious work area for complex components Further equipment details available on request Application area: Ideal for series production and demanding machining tasks in mechanical engineering, toolmaking, and industrial applications. Sales conditions: Price ex-foundation Disassembly, removal, loading, and transport to be arranged by the buyer Inspection by appointment possible Price negotiable Delivery according to EXW (Ex Works)

Condition: ready for operation (used), Year of construction: 1997, - USED - 4-AXIS HORIZONTAL MACHINING CENTRE WITH PALLET CHANGER X-AXIS TRAVEL: 1500 mm Y-AXIS TRAVEL: 1200 mm Z-AXIS TRAVEL: 1250 mm SPINDLE: 10-4000 rpm; 40 kW; HSK-A 100 PALLET: CONTINUOUS ; 1000X1000 mm; 1-500 rpm MAX ADMITTED LOAD: 2000 Kg TOOL MAGAZINE: CHAIN-TYPE ; 161 POS CONTROL UNIT: SIEMENS 840 C OVERALL DIMENSIONS: 8500 x 4800 x 4800 mm Hnedoh Hfrnspfx Ag Iel ACCESSORIES: SWARF CONVEYOR ; PAPER FILTER NOTE: COMPLETELY OVERHAULED MACHINE; HORIZONTAL AND VERTICAL AUTOMATIC HEAD; TURNING TABLE

Condition: used, Year of construction: 2008, Technical details: x-travel: 700 mm y-travel: 700 mm z-travel: 700 mm turning speeds: 18.000 1/min max. torque on the spindle: 110 / 84 Nm Hedpfx Agoy E Np Ss Ionl tool taper: SK 40 control: HEIDENHAIN iTNC 530 tool change unit: 180 fach size of pallet: 500 x 500 mm mm max. workpiece weight: 600 kg spindle: 34 / 28 kW rapid traverse: 60 m/min total power requirement: 68 kVA weight of the machine ca.: 10,5 t dimensions of the machine ca.: 9,5 x 7,5 x 3,4 m horizontal machining center with linear drives,, NC-roundtable, pallet pool RS 10 for totally 12 pallets, monitor for workpiece setting-up device, high pressure coolant through spindle 40bar, internal air blast supply, mode 4, hydraulic clamping 2/4 for workpiece setting-up device and working table, BLUM laser, oilmist suction, 3D touch probe TS 649, tool-breackage control, mechanical, SDS spindle diagnosis system, flush gun, el. handwheel, chipconveyor, approx. 112.000 h "machine on", approx. 79.500h "spindle on", *