Used Baz Horizontally for sale (5,459)

Condition: good (used), Year of construction: 2014, operating hours: 48,000 h, functionality: fully functional, machine/vehicle number: 2080233, travel distance X-axis: 600 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 400 mm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, CNC Control SIEMENS 840D Electrical Connection Connection voltage: 3 × 400 V / 50 Hz (grounded) Network type: TN-S or TN-C system Total connected load: 133 kVA Power factor: 0.6 Fuse rating: 190 A gG (5 s) Weight Operating weight of machine: 20,000 kg Transport weight: 16,000 kg Tool Magazine Tool change system: Pick-up system Tool management: Fixed-coded tool positions Capacity: 84 tools (2 × 42) Maximum total tool weight: 350 kg Feed Drives Drive type: Three-phase synchronous motors Linear measuring system X/Y/Z: Direct, absolute X-Axis Rapid traverse: 100 m/min Max. acceleration: 12 m/s² Kv factor: 7 Peak force: 10,000 N Bwjdpjxt D Ebefx Acysw Continuous force: 5,000 N Positioning accuracy: Tp = 0.008 mm Y-Axis Rapid traverse: 100 m/min Max. acceleration: 10 m/s² Kv factor: 7 Peak force: 10,000 N Continuous force: 5,000 N Positioning accuracy: Tp = 0.008 mm Z Axes (Z1, Z2) Rapid traverse: 100 m/min Max. acceleration: 20 m/s² Kv factor: 7 Peak force: 2 × 5,000 N Continuous force: 2 × 2,500 N Positioning accuracy: Tp = 0.008 mm Main Spindles Spindle arrangement: Horizontal, twin spindles side by side Motor spindles, liquid-cooled, synchronous technology Spindle diameter: 40 mm Tool interface: HSK-A63 Lubrication: Minimum quantity lubrication (oil) Mechanical clamping force: > 18 kN Wear limit: 16 kN Speed range: 1 – 17,500 rpm Acceleration time: 0.7 s Power: 2 × 35 kW at 4,200 rpm (40% duty cycle) Rated power: 2 × 26 kW at 4,200 rpm Torque: 2 × 80 Nm (40% duty cycle) / 2 × 60 Nm (rated torque) Machining Area Spindle distance: 600 mm Travel paths: X-Axis: 600 mm Y-Axis: 600 mm (optional 875 mm) Z-Axis: 500 mm Workpiece Clamping / Table System OP1: Tilting support with two separate tilting tables for fixture bridges OP2: Double tilting carrier (Q-axis) with two direct-drive NC rotary tables (A-/U-axes) Double-sided gearing on the tilting carrier Swivel time 0–180°: 3.5 s Max. asymmetric load: 800 Nm Repeatability Ø 800 mm: < 0.008 mm Max. clamping device and workpiece diameter: Ø 675 mm × 1,430 mm Max. workpiece weight: 600 kg Peak torque: 981 Nm Rated torque: 698 Nm Max. table speed: 50 rpm Angular acceleration: 2.5 – 10 rev/s² Indexing accuracy: ±5" Tangential moment: 4,500 Nm Max. load moment: 500 Nm Tool Change Times Chip-to-chip at n < 10,000 rpm: > 2.75 s Chip-to-chip at n < 17,500 rpm: > 3.15 s

Condition: used, Year of construction: 2011, operating hours: 409 h, machine/vehicle number: 902742, Weights Empty weight: 6.700 kg Functional Mast: articulated arm Bwedoxivwbopfx Acysw Lifting capacity: 200 kg Working height: 1.500 cm Other information Front tyres / undercarriage remaining: 70 Rear tyres remaining : 70 Tyre brand: Solideal Max. horizontal reach: 760 m Transport dimensions (LxWxH): 5.95x1.75x1.96 Additional information Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2012, fuel type: electric, Weights Empty weight: 6.550 kg Functional Mast: articulated arm Lifting capacity: 200 kg Working height: 1.190 cm CE mark: yes Condition General condition: average Technical condition: average Visual appearance: average Other information Delivery terms: EXW Max. horizontal reach: 990 m Transport dimensions (LxWxH): 5,5x1,2x1,99 Additional information Please contact Christian Theißen for more information Manufacturer: Manitou Model: 120 AETJC Year of build: 2012 Condition: Used Data: Max. working height: 11,90 m Max. platform height: 9,90 m Max. reach: 7,35 m Drive type: Battery Total dimensions LxWxH: 5,50 x 1,20 x 1,99 m Length of transport position: 4,08 m Height transport position: 2,38 m Platform dimensions LxW: 1,20 x 0,96 m Max. basket load: 200 kg Swivel range: +/- 175° Movable up to working height: 11,90 m Max. climbing capacity: 25% Bwodpfxswd Npis Acyjw Wheel pressure max.: 27 kN Ground clearance: 0,10 m Own weight: 6.550 kg Special features: Rotatable work basket, basket arm/vertical rotation angle +/- 70°, white tires, advantage: high lateral reach, inner and outer overhang = 0 Location: Neuss Available now

Condition: good (used), Year of construction: 2010, Horizontal bed - Prismatic/flat guideway hardened and ground Working range - Swing diameter over bed mm 1000 - Swing diameter over cross slide mm 700 - Slide path flat mm 600 Main spindle drive - Digital AC motor - 60% ED kW 46 Gearbox Bwjdpfx Asr D Nmyocysw - ZF planetary gear stages 2 - electrically switched - Mounted outside the headstock Headstock - Spindle head DIN 55026 size A11 - Spindle diameter in front bearing mm 190 - Spindle bore mm 132 - Spindle taper metr 140 - Speed range rpm 1-1800 Cross slide - Feed range flat mm/rev 0.001-1000 - Feed range longitudinal mm/rev 0.001-2000 - Thread pitches mm 0.01-999.9 - Rapid traverse plan/longitudinal m/min 5/10 - from center distance 4000mm m/min 5/7 - Automatic central lubrication - Digital AC servo motors plan and longitudinal Tailstock - Quill diameter mm 125 - Quill stroke mm 280 - Mounting taper MK 6 - Clamping on the bed with clamping screws - Quill actuation and clamping manual - Tailstock roller guide

Condition: used, Technical details: x-travel: 800 mm y-travel: 800 mm z-travel: 800 mm turning speeds: 35-10.000 1/min spindle: 37 / 30 kW max. torque on the spindle: 525 / 206 Nm Tool bore: BT 50 rapid traverse: 60 m/min tool change unit: 160 Pos. size of pallet: 500 X 500 mm control: MAZATROL 640M Nexus c-axis: 0,001° x 360.000 workpiece weight: 1.000 kg workpiece height max.: 1.000 mm interference area: 900 mm 2 pcs. horizontal machining centers (HCN 6000-II + HCN 6000, 2005), interlinked with pallet pool (16 pallets) MAZAK FMS, Bedpfswix Hhox Acyjww 2 pallet changer, chipconveyor, coolant device with internal coolant supply, *

Condition: used, Year of construction: 1998, x-travel 650 mm y-travel 560 mm z-travel 650 mm table surface area 400 x 400 mm control Fanuc 18i-M spindle turning speed range 120-12000 U/min ja/yes hand wheel type of pallet-changer 2 Cooling through the spindle 10 bar chip conveyor ja/yes feed 670 mm/min distance work spindle /surface of the table 800 mm table load 400 kg toolpiece magazine: chain magazine 80 BT 40 b-axis 360 1° rapid traverse: 40 m/min feed 1-40.000 mm/min tool changing time 1,3 sec tool/tool tool changing time 3,8 sec chip/chip total power requirement 22,4 kW weight of the machine ca. 10,5 t dimensions of the machine ca. 5 x 3,3 x 3 m (LBH) Machining centre - Horizontal Mitsubishi M-H4B, year of construction 1998, good ondition, regularly maintained. Bwodjxtxlvepfx Acysw

Condition: used, Year of construction: 2020, operating hours: 23,000 h, functionality: fully functional, machine/vehicle number: 2630079, travel distance X-axis: 800 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 650 mm, rapid traverse Y-axis: 120 m/min, rapid traverse Z-axis: 120 m/min, controller manufacturer: Siemens, controller model: 840D sl, workpiece diameter (max.): 1,830 mm, workpiece weight (max.): 800 kg, rotational speed (max.): 40 rpm, overall weight: 28,000 kg, spindle speed (min.): 1 rpm, spindle speed (max.): 17,500 rpm, operating hours of spindle: 11,000 h, distance between spindles: 800 mm, number of spindles: 2, number of slots in tool magazine: 84, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, This high-precision twin-spindle machining center from the SW series is designed for maximum productivity in mass production, especially in the automotive and supplier industries. The machine features two symmetrically arranged motor spindles, a twin NC rotary carrier, and two direct drive rotary tables, enabling simultaneous 5-axis machining and parallel metal cutting operations. Equipped with a Siemens 840D sl CNC control, minimum quantity lubrication, high-dynamic feed drives, and an 84-position tool magazine, the system provides dynamic, precise, and energy-efficient machining processes. The compact design and pick-up capable tool system ensure short chip-to-chip times and high machine availability. This machine is ideal for demanding precision machining tasks such as housings, structural components, gear parts, and components made from aluminum, cast iron, and steel in high-volume production. CNC Control SIEMENS 840D SL Electrical connection Supply voltage: 3 × 400 V / 50 Hz (grounded) Network type: TN-S or TN-C network Total connected load: 152 kVA Power factor: 0.6 Protection: 250 A gG (5 s) Weight Machine operating weight: 28,000 kg Transport weight: 24,500 kg Tool Magazine Tool change: Pick-up system Tool management: Fixed coded tool positions Capacity: 84 tools (2 × 42) Max. total tool weight: 400 kg Feed Drives Drive type: Three-phase synchronous motors Travel measurement system X/Y/Z: Direct, absolute X1- and X2-Axis Rapid traverse: 120 m/min Max. acceleration: 10 m/s² Kv factor: 6 Peak force: 2 × 6,000 N Continuous force: 2 × 3,000 N Positioning accuracy: Tp = 0.008 mm Y-Axis Rapid traverse: 120 m/min Max. acceleration: 11 m/s² Kv factor: 6 Peak force: 20,000 N Continuous force: 10,000 N Positioning accuracy: Tp = 0.008 mm Z1- and Z2-Axis Rapid traverse: 120 m/min Max. acceleration: 20 m/s² Kv factor: 6 Peak force: 2 × 6,000 N Continuous force: 2 × 3,000 N Positioning accuracy: Tp = 0.008 mm Main Spindles Spindle arrangement: Horizontal, twin spindles side by side Spindle diameter: 40 mm Tool interface: HSK-A63 Cooling: Liquid-cooled motor spindles Lubrication: Minimum quantity lubrication (oil) Mechanical clamping force: > 18 kN Wear limit: 16 kN Speed range: 1 – 17,500 rpm Acceleration time: 0.7 s Power: 2 × 35 kW at 4,200 rpm (40% duty cycle) Rated power: 2 × 26 kW at 4,200 rpm Torque: 2 × 80 Nm (40% duty cycle) / 2 × 60 Nm (nominal torque) Machining Area Spindle distance: 800 mm Bwjdpfx Acext D D Rjyew Traverse paths: - X-axis: 800 mm - Y-axis: 900 mm (optional 1,200 mm) - Z-axis: 650 mm Difference coupled Z axes: < 1.0 mm Difference coupled X axes: < 1.0 mm Workpiece Clamping / Table System Twin rotary carrier (Q axis) with two direct drive NC rotary tables (A/U axes) Swivel time 0–180°: 5.0 s Max. asymmetric load: 1,600 Nm Rotary table Ø 800 mm, repeatability: < 0.008 mm Max. workpiece weight: 800 kg Peak torque: 1,900 Nm Nominal torque: 1,300 Nm Max. table rotation speed: 40 rpm Tool Change Times: Chip-to-chip with n < 10,000 rpm: > 3.0 s Chip-to-chip with n < 17,500 rpm: > 3.15 s Note The system is supplied without product-specific tools, clamping devices or robot grippers.

Condition: used, Year of construction: 2017, operating hours: 1,693 h, machine/vehicle number: 10001610, Weights Empty weight: 4.965 kg Functional Mast: articulated arm Lifting capacity: 200 kg Working height: 3.550 cm Other information Front tyres / undercarriage remaining: 0 Rear tyres remaining : 0 Tyre brand: - Max. horizontal reach: 1560 m Transport dimensions (LxWxH): 8.18x1.58x1.98 Additional information Bjdpfotr Na Tox Acysww Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2000, Technical details: turning diameter: 1600 mm turning length: 3000 mm centre height: 800 mm turning diameter over bed: 1600 mm turning diameter over bed slide: 1400 mm turning dia. over face-slide: 1200 mm max. workpiece weight between centers: 20 to speeds: 5,6 -800 1/min transmission ratio: 3 spindle bore: 112 mm turret (x-stations): 8 / VDI 60 travel -x axis: 850 mm travel -z axis: 3020 mm rapid power traverse in X-and Z direction: 6 / 10 m/min power maindrive: 46 kW weight of the machine ca.: 22 to. dimensions of the machine ca.: 7,2 x 4 (3,11) x 2,7 m Bodpfxshutpvs Acysww tech-in lathe, flatbed, tailstock, 8-pos. BARUFFALDI turret with 4 live tools, power 9kW, 4-pos. BARUFFALDI square-headed turret horizontal, C-axis, 3-jaw hydr. chuck SMW Autoblock KNCS 800/165, dia. 800mm, quick adjustment, power cylinder with 2 pressure clamping system, chipconveyor, coolant device, accessories *

Condition: used, Year of construction: 2015, machine/vehicle number: 15019, Drivetrain Type of fuel: LPG Bedpetr Nqfsfx Acyjww Weights Empty weight: 6.010 kg Functional Mast: articulated arm Working height: 3.300 cm Other information Front tyres / undercarriage remaining: 0 Rear tyres remaining : 0 Tyre brand: - Max. horizontal reach: 1900 m Transport dimensions (LxWxH): 7.4x1.1x2.27 Additional information Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2016, Technical details: cutting diameter: 330 mm saw band length: 4680 mm Bjdpfx Aevwcpkocyjww sawing motor: 4 kW cutting speed: 15 - 100 m/min square: 330 x 500 mm cutting length min.: 10 mm cutting lenght max.: 850 (-9999) mm total power requirement: 7,7 kW weight of the machine ca.: 5,5 t space requirements approx. LxWxH: 2,7 x 2,35 x 1,7 m Automatic horizontal bandsaw, hydraulic, material dimension max.: dia 330 mm, rectangular 330 mm x 500 mm, dimension of bandsaw 4680 x 34 x 1,1 mm, incl. roller track *

Condition: used, Year of construction: 2011, machine/vehicle number: A38E-01-004590, Weights Empty weight: 3.770 kg Functional Mast: articulated arm Lifting capacity: 215 kg Working height: 1.350 cm Bwodpfx Acsxivwhoyew Other information Front tyres / undercarriage remaining: 60 Rear tyres remaining : 60 Tyre brand: - Max. horizontal reach: 610 m Transport dimensions (LxWxH): 4.1x1.5x2 Additional information Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2008, Technical details: x-travel: 700 mm y-travel: 700 mm z-travel: 700 mm turning speeds: 18.000 1/min max. torque on the spindle: 110 / 84 Nm tool taper: SK 40 control: HEIDENHAIN iTNC 530 tool change unit: 180 fach size of pallet: 500 x 500 mm mm max. workpiece weight: 600 kg spindle: 34 / 28 kW rapid traverse: 60 m/min total power requirement: 68 kVA weight of the machine ca.: 10,5 t dimensions of the machine ca.: 9,5 x 7,5 x 3,4 m horizontal machining center with linear drives,, NC-roundtable, pallet pool RS 10 for totally 12 pallets, monitor for workpiece setting-up device, high pressure coolant through spindle 40bar, internal air blast supply, mode 4, hydraulic clamping 2/4 for workpiece setting-up device and working table, BLUM laser, oilmist suction, 3D touch probe TS 649, tool-breackage control, mechanical, SDS spindle diagnosis system, flush gun, el. handwheel, chipconveyor, approx. 112.000 h "machine on", approx. 79.500h "spindle on", Bsdpfon Srxqjx Acyjww *

Condition: used, Year of construction: 2015, machine/vehicle number: 15007, Weights Empty weight: 6.010 kg Functional Mast: articulated arm Lifting capacity: 200 kg Bwodpjtr Nr Defx Acyew Working height: 3.300 cm Other information Front tyres / undercarriage remaining: 0 Rear tyres remaining : 0 Tyre brand: - Max. horizontal reach: 1900 m Transport dimensions (LxWxH): 7.4x1.1x2.27 Additional information Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2006, Technical details: x-travel: 800 mm y-travel: 800 mm z-travel: 800 mm turning speeds: 12.000 1/min tool taper: SK 50 control: SIEMENS 840D shopmill tool change unit: 240 fach size of pallet: 630 x 630mm mm spindle: 52 kW / 430Nm total power requirement: 87 kVA weight of the machine ca.: 15 t horizontal machining center, NC-round-table pallet-changer (2 pallets), Internal Coolant Supply 40 bar, prepared for Infrared Touch Probe Renishaw MP 10 without probe, tool-breakage control (mech.), MQL, airblast through spindle, oilmist suction, TRANSMIT funbction, accuracy package, mode 4, glass window right door, incl. FASTEMS FPC 1000 pallet pool for 14 pallets, incl. setting up station, control, and 10 pallets Bodpfjpumdcjx Acyoww approx. 98.500 h main switch on apprax. 45.500 Spindle hours *

Condition: used, Year of construction: 2017, machine/vehicle number: 12011662, Weights Empty weight: 1.535 kg Functional Mast: articulated arm Bedpfxjtr N Ins Acysww Lifting capacity: 200 kg Working height: 1.080 cm Other information Front tyres / undercarriage remaining: 0 Rear tyres remaining : 0 Tyre brand: - Max. horizontal reach: 670 m Transport dimensions (LxWxH): 2.98x0.78x1.92 Additional information Please contact PFEIFER GROUP for more information

Condition: used, Technical details: x-travel: 800 mm y-travel: 800 mm Bsdpfx Acjwix E Reyoww z-travel: 800 mm turning speeds: 35-10.000 1/min spindle: 37 / 30 kW max. torque on the spindle: 525 / 206 Nm Tool bore: BT 50 rapid traverse: 60 m/min tool change unit: 160 Pos. size of pallet: 500 X 500 mm control: MAZATROL 640M Nexus c-axis: 0,001° x 360.000 workpiece weight: 1.000 kg workpiece height max.: 1.000 mm interference area: 900 mm 2 pcs. horizontal machining centers (HCN 6000 + HCN 6000-II, 2008), interlinked with pallet pool (16 pallets) MAZAK FMS, 2 pallet changer, chipconveyor, coolant device with internal coolant supply, *

Condition: used, Year of construction: 2019, operating hours: 1,088 h, machine/vehicle number: E300006263, fuel type: diesel, Weights Empty weight: 6.460 kg Functional Mast: articulated arm Lifting capacity: 250 kg Working height: 1.580 cm Other information Front tyres / undercarriage remaining: 70 Rear tyres remaining : 70 Tyre brand: Outrigger Max. horizontal reach: 750 m Transport dimensions (LxWxH): 6.57x2.35x2.27 Bwjdpfx Acjvyxu Isyow Additional information Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2007, operating hours: 8,599 h, machine/vehicle number: 0300120924, fuel type: diesel, Weights Empty weight: 16.992 kg Functional Mast: articulated arm Lifting capacity: 230 kg Bsdjxt Db Nopfx Acysww Working height: 2.820 cm Other information Front tyres / undercarriage remaining: 60 Rear tyres remaining : 60 Tyre brand: Outrigger Max. horizontal reach: 2290 m Transport dimensions (LxWxH): 12.2x2.49x3.05 Additional information Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2004, operating hours: 9,737 h, machine/vehicle number: 0300080910, fuel type: diesel, Weights Empty weight: 20.200 kg Functional Mast: articulated arm Lifting capacity: 230 kg Working height: 4.330 cm Bwjdpfx Acoxt Dbvoyow Other information Front tyres / undercarriage remaining: 60 Rear tyres remaining : 60 Tyre brand: Outrigger Max. horizontal reach: 2440 m Transport dimensions (LxWxH): 14.88x2.49x3.05 Additional information Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2011, machine/vehicle number: 902881, Weights Empty weight: 6.700 kg Functional Mast: articulated arm Lifting capacity: 200 kg Working height: 1.500 cm Other information Front tyres / undercarriage remaining: 60 Rear tyres remaining : 60 Tyre brand: Solideal Bwodpfexhb Uisx Acyow Max. horizontal reach: 760 m Transport dimensions (LxWxH): 5.95x1.75x1.96 Additional information Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2019, operating hours: 457 h, machine/vehicle number: Z4525XCM-1139, fuel type: diesel, Weights Empty weight: 6.883 kg Functional Mast: articulated arm Lifting capacity: 454 kg Working height: 1.600 cm Other information Front tyres / undercarriage remaining: 90 Bsdpfxjwwghps Acysww Rear tyres remaining : 90 Tyre brand: Outrigger Max. horizontal reach: 755 m Transport dimensions (LxWxH): 6.65x2.29x2.25 Additional information Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2009, machine/vehicle number: 210186, fuel type: diesel, General information Mileage: 94.035 km Weights Empty weight: 3.300 kg Functional Lifting capacity: 200 kg Working height: 1.600 cm Other information Bwedpfotr Nyksx Acyjw Front tyres / undercarriage remaining: 80 Rear tyres remaining : 80 Tyre brand: - Max. horizontal reach: 1100 m Transport dimensions (LxWxH): 5.7x2x3.2 Additional information Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2021, operating hours: 3,183 h, machine/vehicle number: S65XCM-1190, mast type: telescopic, fuel type: diesel, Empty weight: 11.462 kg Lifting capacity: 454 kg Working height: 2.200 cm Front tyres / undercarriage remaining: 70 Rear tyres remaining : 70 Tyre brand: Outrigger Bjdpfxew Ri Tms Acyeww Max. horizontal reach: 1650 m Transport dimensions (LxWxH): 9.76x2.49x2.81 Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2013, operating hours: 67,589 h, machine/vehicle number: 28271, fuel type: diesel, General information Mileage: 49.394 km Weights Empty weight: 3.500 kg Functional Lifting capacity: 230 kg Working height: 2.200 cm Bwjdpfxjtr Nygo Acysw Other information Front tyres / undercarriage remaining: 0 Rear tyres remaining : 0 Tyre brand: - Max. horizontal reach: 1640 m Transport dimensions (LxWxH): 6.92x2.5x2.99 Additional information Please contact PFEIFER GROUP for more information