Used Barrel for sale (230)

Condition: as good as new (ex-display), Year of construction: 2025, The BTS-Drum Crusher PLC auto is ideal for compacting 30 to 220 Ltr drums / barrels, but also plastic and cardboard drums can be easily reduced to their minimum of volume. In many cases this compacted material can then even be marketed again. The drum press impresses with its ease of use, safe operation and high throughput quality. By crushing these valuable and recyclable materials you achieve a volume reduction of up to 90%, a significant saving on your disposal costs and you properly return the material back into the recycling cycle. Pressing force: 24 Ton Machine size: 2587 H x 1190 W x 1000 D mm Machine weight: 690 kg Transport height: 1800 mm Compaction rate: 8:1 Cycle times: 40 seconds Motor: 11 kW 32 Amp Power supply: 380 - 400 V (3 phase) Noise level: 68 dB PLC auto compaction cycles Compaction head with spikes to punch the drum to drain out any residual liquids Maximum safety standards by totally enclosed chamber 30 Ltr. collection tray with tap connection Useable for 30 to 220 Ltr. steel drums, plastic drums and cardboard drums A quality product “Made in Europe” Suitable for compacting Steel drums Plastic drums Cardboard drums Fiber and paper drums Optional extras Machine colour RAL Can and filter crush insert Ijdoc Spguspfx Adnsa Multi head to compact inside a 200 Ltr steel drum Drum Crusher, Drum Press, Drum Compactor, Barrel Crusher, Barrel Press, Barrel Compactor

Condition: good (used), • MAFO barrel washer.. • Total dimensions : • Length : 721cm. • Width : 140cm. • Height : 230cm. • Opening : Iedpfed Ixw Uex Adnsa • Width : 60cm. • Heigth : 74cm. • Inlet conveyor: • Length : 200cm. • Width : 200cm. • INDAUK.

Condition: used, functionality: fully functional, P1000 / P1200 H-20 Outercasing & ropebarrel 4/1 Rope diameter 20 mm Inclusive 4/1 traverse Isdpfx Adswd Iyaonsa In exellent condition !

Condition: good (used), Year of construction: 2003, Netstal S-1500-460 (2003) Clamping force - 150 t Screw diameter - 45 mm Hours - 79.000 Distance between tie‑bars (tie bar spacing): 460 × 460 mm Mold platens size (fixed / moving platen): 757 × 757 mm Opening stroke (mold opening stroke): 450 mm Min. mould height: 250 mm Max. mould height: ≈ 550 mm Iodpfxewkg Txe Adnsa Max. daylight (max open platen distance): sometimes specified high (depending on configuration) Injection / Plasticizing Unit: Screw (barrel) diameter: 40 mm in common version. Shot volume (max): ≈ 201 cm³ Shot (weight) for PS: often around ~193 g (depending on material) Injection pressure: varies by configuration (some data sources mention around 1750 bar or more) Machine Dimensions & Weight: 10 400 kg

Condition: excellent (used), Year of construction: 2016, operating hours: 28,600 h, functionality: fully functional, clamping force: 2,000 kN, screw diameter: 55 mm, displacement volume: 570 cm³, Clamping force 2000 kN Mould opening force, max. 101 kN Travel force movable platen opening 50 kN Travel force movable platen closing 42 kN Size of mould platens (h x v) 915 x 915 mm Distance between tie bars (h x v) 560 x 560 mm Mould opening stroke 700 mm Mould height min 550 mm Max. daylight 1250 mm Hydraulic ejector - stroke 200 mm Ejector force 58/28 kN Injection unit: Screw diameter 55 mm Ls/D ratio 23 Injection pressure 2387 bar Iedpfx Adsxz Tq Njnea Stroke volume 570 ccm Shot weight (PS) 519 gr. Injection rate 261 ccm/s Screw speed 260 1/min Plasticising rate max. 49 g/s Nozzle pressure 87 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 45 kW Installed heating capacity 23 kW Adjustable barrel heating zones 6 Reservoir capacity 525 ltr. Dimensions and weights: Dimensions of the machine ca. 6,00 x 2,10 x 2,10 m Total machine weight 11500 kg Max. mould weight 2535 kg Accessories: - Anti vibration pads Additional Options: - Electrical plasticizing motor - Accumulator - 2 x Air valves - 2 x core pulls on movable plate - 1 x core pull on fix plate - 8 x hotrunner controller - Robot interface according to Euromap 67

Condition: used, Technical details: number of spindles: 15 Stück number of stations: 8 Stück control: PS 2000 weight of the machine ca.: 17,0 t total power requirement: 83,0 kW dimensions of machine: LxBxH: 2400x2800x2800 mm dimensions electric cabinet: Nr.1:LxBxH: 1000x850x2350 mm dimensions electric cabinet: Nr.2: LxBxH: 1250x650x2230 mm dimensions electric cabinet: Nr.3: LxBxH: 650x600x1700 mm dimensions electric cabinet: Nr.4: LxB.H: 1000x500x1350 mm space requirements approx. LxWxH: 5,0 x 6,2 x 3,8 m TRANSFER MACHINE with 3 work station and 15 drill & mill spindles for example the production of a high quantity of armatures Other technical information about the machine: - workpiece carrier: workpiece holding barrel Ø 800mm for 8 work piece - clamping station, cycle time of 10 sec. - drilling and milling unit: SK 40 intake; spindle stroke 125 mm; standard feed rate 1m/min; rapid traverse feed rate 4m/min; RPM max. 2240 rpm - right 3x drill-& mill spindle, 1x thread cutting spindle, 1x U-axis such as radial 2x drill-& mill spindle slideable, 1x thread cutting spindle slideable and 2x U-axis slideable - left 3x drill-& mill spindle, 1x thread cutting spindle, 1x U-axis such as radial 2x drill-& mill spindle slideable, 1x thread cutting spindle slideable and 2x U-axis slideable - 1.Thread-cutting unit: SK 40 Intake; Quill Ø 125 mm; quill-stroke 125mm; RPM 35.5 - 900 rpm; right/left - 2.Thread-cutting unit: SK 40 Intake; Quill Ø 125 mm; quill-stroke 80mm; RPM 45 - 560 rpm; right/left Equipment: - 2 hydraulic aggregate - chip conveyor - belt filter produced by Filtertechnik Gera (fleece band 430mm) - control panel - manual switch i.D. Ijdpfxju Idxfo Adnja *

Year of construction: 2010, operating hours: 29,000 h, condition: excellent (used), Category: Twin-screw extruder Number: DE27699 Manufacturer: Coperion - Werner & Pfleiderer Iedpfxexykcgo Adnea Type: ZSK 50 MCC+ Year: 2010 Screw diameter: 2 x Ø 50.0 mm L/D: 48:1 Motor: 129 kW Details: Co-rotating, segmented screws and barrel, vacuum pump, temperature control unit, 2x side feeders, 1x side degassing The extruder is in very good condition and has only 29,000 operating hours. Options: 7-fold dosing system from Motan Colortronic, dryer (Motan LA 1200/4), IPS strand extraction, strand conveyor belt, water bath, granulator, vibrating screen. All options are available immediately at extra charge. This offer does not meet your requirements? Please visit our website Plama or send us your detailed enquiry. We offer suitable equipment for almost every budget.

Condition: used, turning diameter / mm turning length / mm swing diameter over bed slide / mm Technical data - Model 230 DIMENSIONS Centre height on the bed: 230 mm Spacing between centres: 1000-1500 mm 2000-2500 mm 3000 mm Bed width: 360 mm Largest turning Ø: on the bed: 465 mm on the carriage: 278 mm on fixed steady rest: 200 mm on travelling steady rest: 160 mm CROWNING Width of the crank: 300 mm Distance between face plate edge and offset: 150 mm Largest turning Ø on the offset: 690 mm SPINDLE Ø of front bearing (inside): 110 mm Ø of rear bearing (inside): 95 mm Ø of hole: 77 mm Mounting Type - Cam Lock: 6" Internal spindle taper - taper: 1 : 20 Spindle taper - C. M. - N.: 5 Speed ranges: Slow feed - rev. 1': 15÷1000 Normal feed - rev. 1': 22÷1500 Fast feed - rev. 1': 30÷2000 FEEDS (without gear change)-N.: 108 Longitudinal feed range at revs. : 0.04÷4 mm Transverse feed range at revolution: 0.02÷2 mm Lead screw - Ø: 40 mm Lead screw pitch: 12 mm THREAD (without gear change) Metric - N. 54 to: 0.5÷28 mm Module - N. 54 to Module: 0.25÷14 Whitworth - N. 54 to Wt. x 1": 56÷1 Diametral Pitch - N. 54 to D.P.: 112÷2 Inch - N. 54 to Inch: 1/32 ÷ 13 3/4" SPINDLE PIT Quill Ø: 75 mm Quill barrel: 220 mm Quill taper - vices N. 5 POWER Main motor - HP: 10 Pump motor - HP: 0.25 WEIGHT approx. - kg 2000-2220 2530-2720 2920 ON REQUEST Isdpfowz Rywsx Adnsa Main motor - HP

Condition: used, empty load weight: 8,280 kg, maximum load weight: 26,720 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 11/2011, loading space length: 13,620 mm, loading space width: 2,480 mm, suspension: air, color: green, Equipment: ABS, Axles : Lift axle Brakes : EBS, disc brakes Semi-trailer height : standard (1100-1250 mm) Platform : Side sliding tarpaulin, rear: Portal doors Other equipment : Storage/tool box Approval / documents : previously Approved in Germany ID: 117624 Kögel locations Left + right Safe server sliding tarpaulin panel system L: 13620 mm W: 2480 mm H: 3000 mm Lift axle SAF axles Certificate VDI 2700 and standard DIN 12642 Pallet stop bar on both sides DAIMLER version 9.5 Beverage mixed load Barrel and beverage crate pallets 34 Euro pallets 80 x 120 cm 26 industrial pallets 100 x 120 cm We always have a large selection of used refrigerated and ice-cold vehicles in stock. You can find more from our range under Non-binding offer, sale only to traders, errors and prior sale reserved Advertisements and company logos on vehicles may have been digitally processed on photos Iodpfx Adsulqdbenoa

Condition: used, AJAX AJAT360X1000 CNC Lathe, Swing Over Bed 320mm, Distance between Centres 750 - 1000mm, Swing Over Cross Slide 150mm, Spindle Nose A2 - 5, Spindle Bore 55mm, Spindle Speed 150 - 2000rpm, Chuck Size 200mm, Tailstock Barrel Diameter 32mm, Tailstock Barrel Travel 100mm, Tailstock Morse Taper MT3, Motor Power 3 - 7kw, Machine Work Hours - 100 hours Location: These lots are located in Newcastle upon Tyne, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described. Isdexzf Igspfx Adnea

Condition: excellent (used), Year of construction: 2018, operating hours: 20,000 h, functionality: fully functional, clamping force: 2,000 kN, screw diameter: 55 mm, displacement volume: 523 cm³, Clamping force 2000 kN Mould opening force, max. 101 kN Size of mould platens (h x v) 985 x 915 mm Distance between tie bars (h x v) 630 x 560 mm Mould opening stroke 700 mm Mould height min 350 mm Max. daylight 1050 mm Hydraulic ejector - stroke 200 mm Ejector force 58 kN Injection unit: Screw diameter 55 mm Ls/D ratio 20 Injection pressure 1904 bar Stroke volume 523 ccm Shot weight (PS) 476 gr. Injection rate 216 ccm/s Screw speed 280 1/min Plasticising rate max. 49,7 g/s Nozzle pressure 82 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 37 kW Installed heating capacity 18 kW Adjustable barrel heating zones 5 Reservoir capacity 525 ltr. Dimensions and weights: Dimensions of the machine ca. 5,60 x 2,20 x 2,20 m Total machine weight 11000 kg Max. mould weight 2535 kg Accessories: - Anti vibration pads - Krauss Maffei Robot LRX 150 X: 900 mm Y: 700/700 mm Z: 2000 mm C: 0 - 90 Grad Isdpjxz Tqvofx Adnoa Additional Options: - Bluepower - Servodrive - 2 x air valves - 3 x core pulls - 2 x 6-fold water battery

Condition: excellent (used), We are offering an unused single-screw extruder from stock. The unit was operated exclusively for test purposes and is therefore in excellent, near-new condition. Ideal for laboratory, material development, small batch production, or custom extrusion applications. — Technical Data & Features • Screw diameter: 30 mm • L/D ratio: 25:1 • Condition: unused / test runs only • Drive: 3 kW SEW motor with gearbox • Heating zones: 4 zones with temperature controllers • Control cabinet: included in scope of delivery • Currently not connected, but can be integrated without issue • Die: Strand die can be customized or newly manufactured upon request • Design: robust laboratory/pilot plant construction • Mobile: base plate with heavy-duty castors – easy to position — Special Features • Very compact design Iodpfx Adsxxim Ionja • Ideal for filament, profiles, laboratory tests and material trials • Barrel and screw in excellent condition (see photos) • Immediately available from stock

Condition: as good as new (ex-display), The scope of delivery includes: 01x waste container, II. choice Manufacturer: SSI Schäfer Volume: 770l Total width: approx. 1.350 mm Total depth: approx. 1.115 mm total height: approx. 1.470 mm Material color barrel: black Ijdpfjk Nmmhex Adnsa Material color lid: green tires: 4 tires (2x braked) Dead weight: 68 kg Remark: Useful width and depth are tapered towards the bottom. General information about the item: This item is offered for pickup only. Any additional transport or shipment of this or a shipment of this item is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery can be requested from us.

Condition: excellent (used), Bystronic Type: ERMM180 Thermoplastic applicator Field of application The thermoplastic applicator applies a thermoplastic material to rectangular glass panes rectangular glass panes as part of a production line for solar modules. The plastic forms a seal to a second pane of glass, which is applied in a later step. applied in a later work step. The panes are fed, applied and removed on horizontally running belts/belt conveyors. belts/conveyors. The thermoplastic applicator is a highly technical machine that has to fulfill many requirements with great precision. For this reason, you should only use products (glass, sealant) that meet the specifications on the following pages. the following pages. This helps to achieve high-quality and safe production. production. Performance and connected loads Maximum transport speed: 18 m/min Height of the glass running surface: 1100 mm Height of the applied sealant line: 0.5 to 1.2 mm Maximum width of the applied sealant line: 12.0 mm Required constant pneumatic inlet pressure: 6.5 to 8.0 bar Pneumatic operating pressure: 6.0 bar Compressed air consumption in normal operation: 10 standard liters/min Compressed air consumption when changing barrels: 500 standard liters/min Average energy consumption per hour: 10 kWh Working temperature of the sealant: 110°C to 130°C Ambient conditions and emissions Minimum ambient temperature: +15°C Maximum ambient temperature: +35°C Maximum relative humidity:: 75% Noise level: less than 70 dB (A) Requirements for the drums for the sealant Design: Material lidded container D18 according to DIN 6644 - with base (F1) and smooth outer surface (jacket design, smooth). Capacity: 216 liters Inner diameter: 571.5 mm Height: 874 mm Minimum wall thickness: 1.25 mm Machinable glass panes Types of glass Glass panes with a smooth surface can be processed (float glass). Dimensions and weights Smallest dimensions Largest dimensions Geometry 1198 mm 1200 mm Length LS 498 mm 600 mm Width BS 1.8* mm 5.0* mm Thickness DS Thermoplastics based on poly-iso-butylene (butyl) can be processed. The plastic must be flowable in the range of approx. 110°C to 130°C and have a defined viscosity curve. viscosity curve. Only use materials that have proven themselves in practice and that have been approved by the manufacturers of these materials and by Bystronic. by the manufacturers of these materials and by Bystronic for your intended use. intended use. For detailed product descriptions and information on handling, storage and disposal of the plastic disposal of the plastic used can be found in the information sheets and safety data sheets provided by the manufacturers of the plastics. Dimensions of gantry robot with glass conveyor Height x width x depth: 2800 x 1890 x 2735 mm Weight of the gantry robot: 850 kg Weight of the glass conveyor: 1400 kg Drum pump dimensions Height x width x depth: 3320 x 1060 x 1200 mm Weight (without drum): 850 kg Weight (with drum): 1100 kg Height H for drum pump FP1: 4400 mm Height H for drum pump FP2: 4000 mm Control cabinet dimensions Height x width x depth: 2200 x 1800 x 600 mm Weight: 450 kg The applicator was used with the material butyl. Condition: second-hand / used From test laboratory, as good as new condition, only a few operating hours for testing! Ijdpfxjd N Erps Adnsa Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Year of construction: 2015, Stork S+ 6600-5650 Injection Moulding Machine Iedpfx Aoxyqy Esdnja Control System: CDS700 Year of Manufacture: 2015 The machine is in very good technical condition, fully operational, and ready for immediate use in an industrial facility. The injection unit was overhauled a year ago – including a new barrel, screw, and screw tip. Clamping Unit Clamping force: 6,600 kN Dimensions of mounting plates (H × W): 1,370 × 1,370 mm Tie bar clearance (H × W): 900 × 900 mm Minimum / maximum mold height: 400 – 1,125 mm Maximum opening stroke: 2,065 mm Centering ring diameter: 200 mm Ejector stroke: 300 mm Injection Unit Screw diameter: 84 mm Injection volume: 2,575 cm³ Shot weight (PS): 2,369 g Injection pressure: 1,650 bar Maximum injection speed: 500 mm/s Additional Equipment Pneumatic valves – 4 pcs Core pull – 1 pc Injection system overhauled: new barrel, screw, and screw tip (one year ago) The machine is available for inspection and testing under power. Photos and videos of machine operation can be provided upon request. Loading and transport can be organized.

Condition: used, mileage: 866,052 km, power: 324 kW (440.52 HP), first registration: 06/2010, overall weight: 26,000 kg, fuel type: diesel, color: blue, axle configuration: 3 axles, next inspection (TÜV): 04/2026, brakes: retarder, gearing type: automatic, emission class: euro5, loading space width: 2,480 mm, total width: 2,550 mm, total height: 3,700 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), Construction Description: Trucks with Trailer (MAN, Beverage Body) General The vehicle is a MAN truck with a beverage body and trailer combination. The truck is designed as a drawbar combination (truck + central axle trailer) and is primarily used for beverage transport. 1. Chassis & Cab * Manufacturer: MAN * Model: TGA * Axle configuration: 6x2 * Cab: Spacious sleeper cab, suitable for long-distance haulage * Interior features: * Multifunction steering wheel with integrated controls * Clear dashboard with analog round instruments * Air conditioning and ventilation system * Passenger seat, bunk area behind seats 2. Body (Truck + Trailer) * Body type: Beverage body/box body * Material: Aluminum/composite construction, insulated * Roof: Translucent tarpaulin roof (visible from inside), ideal for daylight use during loading and unloading Iodpew Ii A Nefx Adnea * Interior floor: Durable wooden floor, heavy-duty, suitable for roll cages, pallet jacks, or pallets 3. Trailer * Design: Central axle trailer, also with beverage body * Axles: 2 axles 4. Application * Mainly for transporting beverages in crates and barrels * Large loading volume due to the combination of truck and trailer * Easily accessible from sides and rear for fast loading and unloading 5. Special Features * Clean interior * Generous cargo space with robust floor * Well-equipped driver's cab * Suitable for national and regional logistics

Condition: excellent (used), Year of construction: 2015, operating hours: 22,000 h, functionality: fully functional, clamping force: 800 kN, screw diameter: 40 mm, displacement volume: 201 cm³, Clamping force 800 kN Mould opening force, max. 55,3 kN Travel force movable platen opening 31,1 kN Travel force movable platen closing 22 kN Size of mould platens (h x v) 670 x 670 mm Distance between tie bars (h x v) 420 x 420 mm Mould opening stroke 500 mm Isdpfoxz Tp Ejx Adnsa Mould height min 250 mm Max. daylight 750 mm Hydraulic ejector - stroke 150 mm Ejector force 23 kN Injection unit: Screw diameter 40 mm Ls/D ratio 20 Injection pressure 1860 bar Stroke volume 201 ccm Shot weight (PS) 182,9 gr. Injection rate 126 ccm/s Screw speed 295 1/min Plasticising rate max. 26 g/s Nozzle pressure 50 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 15 kW Installed heating capacity 11 kW Adjustable barrel heating zones 5 Oil Reservoir capacity 400 ltr. Dimensions and weights: Dimensions of the machine ca. 4,50 x 2,00 x 2,20 m Total machine weight 3900 kg Max. mould weight 995 kg Accessories: - Anti vibration pads - Anti vibration pads - 4-fold water flower Additional Options: - 1 x Air valve - 2 x hydr. core pulls - Accumulator - APC - Robot interface according to Euromap 67 - 4 x hot runner controller

Condition: excellent (used), Year of construction: 2007, clamping force: 1,500 kN, screw diameter: 45 mm, displacement volume: 305 cm³, injection pressure: 2,050 bar, injection weight: 270 g, mold height (min.): 275 mm, Demag IntElect 150/520-610 General Information Year of manufacture: 2007 Weight: 6,900 kg Dimensions (L × W × H): 5.5 × 1.5 × 2.1 (2.3) m Control system: NC4 Operating hours: 26,500 h Clamping Unit Clamping system: 150/... Clamping force: 150 t Platen dimensions (H × V): 770 × 770 mm Tie bar clearance (H × V): 520 × 520 mm Mould height (min.–max.): 275 mm (max. increased) Max. distance between platens: 1180 mm Ejector stroke: 125 mm Ejector force: 35 kN Injection Unit Injection unit type: …/610 Screw diameter: 45 mm L/D ratio: 20 Injection volume: 305 cm³ Shot weight: 270 g Specific injection pressure: 2050 bar Wear-resistant screw; bimetallic barrel, standard L:D Three-piece ring-type non-return valve (RSP) Increased injection speed: 300 mm/s Additional Equipment Hour counter reading: 26,500 h - Increased mould mounting height (min. unchanged, max. extended) - Wear-resistant screw; bimetallic barrel; standard L:D; screw diameter 45 mm - Three-piece ring-type non-return valve (RSP) - Electro-hydraulic interface for connecting 2 hydraulic cores on the moving mould plate, via a separate hydraulic unit - Increased injection speed (300 mm/s) Isdpfx Asxxrr Tjdnea - Increased mould mounting height (min. unchanged, max. extended) Offer for the injection moulding machine only

Condition: like new (used), Year of construction: 2017, Machine: ENGEL VICTORY 500T / 7050 (Year 2017) Year of manufacture: 2017 Control unit: CC300 Operating hours: 565 h Availability: Immediate Clamping Unit: Clamping force: 500 tons Opening stroke: 1100 mm Distance between tie bars: 1500 × 1285 mm Platen size: 1500 × 1285 mm Minimum mould height: 500 mm Maximum daylight (open distance): 1600 mm Injection Unit: Screw diameter: 120 mm Screw length (L/D): 22 D Injection volume: 5430 cm³ Maximum injection pressure: 1600 bar General Data: Motor power: 98 kW Iodpjxvingjfx Adnsa Heating power: 30 kW Clamping unit weight: 31 tons Injection unit weight: 15 tons Machine dimensions (L × W × H): 10.50 m × 2.30 m × 2.30 m Options: Core pullers: 3 Robot interface: No Bi-metallic screw/barrel: Yes Other equipment: STAUBLI magnetic platens, 24 hot runner heating zones Note: The machine has very low operating hours (565 h) and belongs to the modern ENGEL Victory tie-bar-less series, ideal for large moulds and high-precision production.

Condition: excellent (used), Here we offer you a be weathering tester. Atlas Xenotest Alpha LM a universal weathering instrument for testing the fastness to light and weather resistance of materials under normal, high-temperature and high-performance conditions. XENOCHROME filter Iedpsd Dtn Uofx Adnja XENOSENSIV gear Control the lamp power in W / m ² Sample room temperature controlled up to 70 degrees Electronics at sample level XENOSENSIV E(300-400 nm) and SST Stationary samples temperature and relative humidity sensor Humidification Irrigation Water supply with an integrated water tank Electronic version: 230V, 50/60 Hz Absorption filter 7 IR: tracking 40-140 W / m ² turn running 21 - 72 W / m ² Window glass 10 FG: tracking 40-110 W / M ² turn running 21 - 57 W / m ² Absorption filter 4 IR + 3 window glass: tracking 40-140 W / m ² turn running 21 - 72 W / m ² Absorption filter 6 IR + 1 UV: tracking 40-140 W / m ² turn running 21 - 72 W / m ² Rel. electrical power without XENOSENSIV sensor: continuously adjusted to the set value 53-120% Samples ambient temperature:-20-70 ° (depending on selected filters configuration) Black standard temperature: Tracking 25-130 ° C turning barrel 25-100 ° C Relative humidity: 10% - 95% Fan RPM: 500-2500 RPM Dimensions: 900 x 780 x 1800 mm Type: Xenotest Alpha LM high energy Condition: pre-owned / used Scope of delivery: (See image) The unit comes out of an operation. We may more questions like on the phone for you answered

Condition: excellent (used), Year of construction: 2019, UV ink printer, year of manufacture and installation 2019 - production Japan According to the attached counter capture - 1,551 operating hours and 37,000 sqm printed. Perfect working condition - equipment is in production and can be viewed / tested Working table and material dimensions: Fixed table with dimensions of 125 X 250 cm and payload of 34 KG; Maximum material thickness - 5,08 cm; High power vacuum system - 6 vacuum zones; 5 pneumatic guides. Minimum per support with guides 60X80 cm; Printing heads: 2 piezoelectric heads 636 nozzles per channel and variable drop between 6 and 42 picolitres; Maximum print area covered by the heads is 126 X 251 cm for edge to edge printing; Nozzle detection and compensation system; Automatic self-cleaning optional not mandatory. Number of colours : Digital Printer UV ink; 4 colours - CMYK (Cyan, Magenta, Yellow, Black) with the possibility to reactivate 6 colours white + transparent colourless lacquer. Resolution and Productivity : Maximum resolution 1440 dpi; Express speed - 58,7 mp/hour; Production speed - 35,7 mp/hour; Quality speed - 25,3 mp/hour; Quality speed 2 layers - 12,5 mp/hour; UV ink barrels - minimum 1 litre. Accuracy: Line thickness: Maximum error +/- 0.8 mm per 2.5 m side; Maximum error +/- 0.4 mm on 1.25 m side. Iodpfxomcw S Se Adnsa Straightness: Maximum error +/- 0.7 mm on 2.5 m side; Maximum error +/- 0,5 mm on 1,25 m side. Diagonal error: Maximum error +/- 1,0 mm on 2,5 X 1,25 m. Other: Patented solution to achieve grey gradients; Stand/Working stand Ionizing bar (electrostatic discharge) Special bridge for loading and moving equipment. EXW - old price 49.000 euro - new price 35.000 (without VAT in EU)

Condition: ready for operation (used), Year of construction: 1998, Stock-No. 13610 Manufacturer Krauss Maffei Type of machine KM 110 – 390 C2 Year 1998 Working hours h Controlversion MC 3-F Screentext German Location Eschweiler - Germany Clamping unit: Clamping force 1100 kN Mould opening force, max. 70 kN Travel force movable platen opening 35 kN Travel force movable platen closing 28 kN Size of mould platens (h x v) 745 x 770 mm Distance between tie bars (h x v) 470 x 470 mm Mould opening stroke 600 mm Mould height min 300 mm Max. daylight 900 mm Hydraulic ejector - stroke 150 mm Ejector force 22/10 kN Injection unit: Screw diameter 35 mm Ls/D ratio 23 Injection pressure 2429 bar Stroke volume 156 ccm Shot weight (PS) 142 gr. Injection rate 123 ccm/s Screw speed 391 1/min Plasticising rate max. 22 g/s Nozzle pressure 84 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 18,5 kW Installed heating capacity 12 kW Adjustable barrel heating zones 5 Reservoir capacity 345 ltr. Dimensions and weights: Dimensions of the machine ca. 4,50 x 1,60 x 2,00 m Total machine weight 6000 kg Max. mould weight 1485 kg Accessories: - Anti vibration pads - 6 x Water flow Iedpfx Aoub S Ulsdnoa Additional Options: - 2 x air valve - 2 x core pull - Robot interface according to Euromap 12 - Electrical screw drive - Accumulator

Condition: excellent (used), Here we offer a SmartPower 210/1330 thermoset machine. Wittmann Battenfeld injection molding machine with control UNILOG B8 Machine was serviced / checked by the manufacturer WITTMANN BATTENFELD Deutschland GmbH in January 2021. checked and updated to the latest possible status Within the scope of the complete inspection, various updates were installed and the hydraulic oil (600 liters) was refilled. In addition to the already existing pressure switches, the plant offers the possibility to Ijdpfsfphtvex Adnja the possibility to install additional cavity pressure switches (2 pieces Kistler module for cavity pressure changeover, range 1: 20,000 pC, range 2: 10,000 pC). The parts for the cavity pressure switch upgrade are included in the scope of delivery. Injection moulding machine: Series: SmartPower Machine type: 210/1330 Control type: UNILOG B8 Machine number: 137949-100 Machine weight, gross/net Main machine dimensions Noise level (DIN EN ISO 3744-46) 65 dB(A) Ambient temperature +15 - +40°C (+59 - +104°F) Year of manufacture: 2017 Operating hours of 1437 hrs. Hydraulic system: Hydraulic oil, tank capacity Oil temperature min / max (HLP 32) min 30°C (86°F) / max 40°C (104°F) Oil temperature min / max (HLP 46) min 40°C (104°F) / max 50°C (122°F) Switch-on temperature for oil cooling (HLP 32) 35°C (95°F) Switch-on temperature for oil cooling (HLP 46) 45°C (113°F) Electrical system: Drive power, Hydra. Pump 37kW Motor voltage Frequency Screw barrel temperature 350°C (662°F) max. Water system: Oil cooler: Cooling water connection [...]

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, number of ink cartridges: 5, total width: 1,600 mm, year of last overhaul: 2024, input voltage: 220 V, working width: 1,600 mm, product width (max.): 1,600 mm, roll diameter: 1,600 mm, roll width: 1,600 mm, tank capacity: 3 l, HP Latex Printer 375 - 3 liter ink cartridges Only 4500 sqm Last complete service, including change of print heads - July 2024 Ijdpfxemcw Tls Adnea Average maximum width - 1,63 cm; Soft RIP Caldera (without PC). Stand, media feed roller, media take-up roller and tension adjustment kit; High precision for material movement; Registration - automatic control of the fit on the sheet, including front/side; Maximum resolution 1200 X 1200 dpi; Automatic double-sided banner printing; 6 print heads - 2 for cyan and black, 2 for magenta and yellow, 1 for light cyan and light magenta and 1 for latex optimizer; Defective nozzle detection and replacement system. Banding elimination solution; Latex-based ink. Barrels of 3 liters; Resistance to scratching; Built-in spectrophotometer for ICC profiling and automatic calibration; Optimized solution for banding removal; Complete drying right inside the printer so that the product is delivered dry and ready for lamination or packaging; Low warm-up time 90 seconds; Automatic feed adjustment; Ink collector for printing on porous textiles. EXW - old price 9900 euro - new price 7900 euro without VAT

Condition: not inspected (used), DÜRR Type: DÜRR 1C gluing system Dürr 1C gluing machine with drum pump, dosing unit and heated hose (approx. 5m). Technical description of the machine: Condition of the system Barrel pump, delivery hoses, dosing unit etc. are contaminated with old glue and must be cleaned or replaced. Ioderdyb Aspfx Adnea and must be cleaned or replaced. The machine has approx. 20 operating hours. Machine was used in a research facility. Year of construction 2017 Air inlet pressure max 6 bar Dimensions: approx. 1.5x1x1.5 meters 1 DÜRR adhesive control unit (110017040) 1 single barrel pump (110014004) Weight: approx. 300 kg Condition: used Scope of delivery: (see picture) (Subject to changes and errors in the technical data and specifications) We will be happy to answer any further questions you may have over the phone.