Barrel buy used

Recognised location: Ashburn (US) (Change)
Enter e-mail address
or
Move
3

Barrel roll stand Container Service CS-depot 04/1

Waldstr. 17, 57250 Netphen-Deuz, DEGermany
6492 km
1999
good (used)
Barrel roll stand Manufacturer: container service Type: CS deposit 04/1 Year of construction: 1999 No. : 075444 1340 x 1330 x 220 with forklift recording feet high Barrel-roll stand attachment 1240 x 890 x 380 mm high with 4 roller diameter 60 mm and length 870 mm Gjmuai0ws more
3
ASM Dimatec 05/270A barrel press Item condition: Used ASM Dimatec Bbx29odp8u 05/270A Barrel press The article is from a Commons resolution. All of our used and tested article ran smoothly until the expansion. Used article, we grant a right of return by two weeks. For further questions or a an express delivery you please contact with us. Scope of delivery see article photo. more
4

Barrel / Beer cooler verschiedene

BerlinGermany dealership location
6731 km
good (used)
Cooler, Bierbox, beer keg cooler, Run cooler, combi refrigeration unit Pietqcjgc more
3
-Drum rack with tray 7lauholgp -4 courses for 200L barrels (Denios) -Drum pads for 200 L barrels (Denios) more
4
2pndnbyj3 Used holding basin with supporting feet and Carrying handles for barrel pallets Manufacturer: Bauer Suedlohn Measurements: 130cm x 135cm Bathing depth 15cm Collecting volume: 220l Year of construction: 2000 Weight: 100kg Carrying capacity: 700kg Max. Density: 1.9kg / l more
1

Vacuum pump barrel Siegperle V70t

ObrigheimGermany dealership location
6627 km
good (used)
7000l further on request Bbiwu2jtce more
7

Rubber Belt Shot Blaster Wheelabrator T85

SoufflenheimFrance dealership location
6578 km
1994
good (used)
RUBBER BAND DUMP STRIP BEAM LINE WITH FILTER RUBBER BELT SHOT BLASTING WITH FILTER name: rubber barrel shot blasting machine Manufacturer: Wheelabrator Type: T 85 Belt design: rubber band batch Max kg: 180 kg centrifugal wheels: 1 piece Maximum unit weight: 8 kg Holes ø: 610mm Hollow band width: 735 mm consisting: -Hollow band blasting machine - Cabinet - filter system Very good condition 8gtxmtfrv more
2

plastic barrel Schuetz BAM 4215

D - Nordrhein-WestfalenGermany dealership location
6452 km
2005
used
No.: 162 Manufacturer: Contactor type: D/BAM 4215 / 1 H 2 Number: 10-PC Dimensions: Width = 400 mm Height = 620 mm 88pkawzx0 Weight: 2, 5kg maximum gross weight: 105kg maximum density: 1.6 kg / l min. repose angle: 38° Documents: certificate of approval more
5
-COM 454- Offered here is a keg shelf of Hoffmann Industriebau GmbH. The keg Shelf has a drip pan below. Dimensions: CA. 303 x 130 x 305 cm (length x width x height) Shelf depth: approx. 128 cm Only pick-up possible. You get a proper invoice with expelled VAT when purchasing Interest or questions, please register by E-Mail! Eentu03 more
3

Syringe barrel fit on ARBURG D 70

Schwäbisch Gmünd Germany dealership location
6698 km
used
Syringe barrel D70, suitably on ARBURG - injection unit for sale 2100. E0yrwqbaa The cylinder was 6 years in use, there were only non-reinforced materials (ABS, PP, PA, PS) processes. more


barrel
every day

New machines via email!

Be informed!
6
BTS-Drum Press / Barrel Press for Metal drums / Plastic drums Height: 2587mm Width: 1190mm Depth: 1000mm Weight: 690kg Transportation Ht: 1800mm Power Supply: 380-400V (three phase) Motor: 11 kW 32 Amp Pressing Force: up to 24 Ton Noise Level: 75 decibels Compaction Ratio: 6:1 Cycle Times: 40 seconds Loading Aperture Height: 1210mm Width: 802mm Depth: 816mm The BTS-Drum Crusher is suitable for crushing metal and plastic drums up to 200Lt. in size. Drum Crusher resolves the problem of space an... more
barrel content: 100 l max. barrel-Ø (key width): 620 mm 98lg2decb barrel opening: 280 mm max. filling weight: ca. 200 kg barrel speed: 12 - 28 rpm drive: 380 V, ca. 0,75 kW weight: 368 kg space needed: 1450 x 820 x 1750 mm more
5
Hollow band blasting Fabr. SAHA Rotorjets type MB O Fabr.# 20387 kom.# 35/66221 built in 1986 Feeder / tipping only 4023 hours! Technical data: Conveyor belt size 770 x 22 x 10 mm Hollow bandwidth 985 mm maximum load-bearing capacity of 150 kg of the drum maximum work-piece weight 10 kg Conveying speed 0.17 0.08 m / sec. Compressed air demand 1,0 m³ / h Power 13.88 kW Weight approx. 4,0 t Overall dimensions of the machine CA. 1760 x 1725 x 4150 mm External dimensions of the feede... more
2

plastic barrel Siepe P6407

D - Nordrhein-WestfalenGermany dealership location
6452 km
2003
used
No: 163 Manufacturer: Sameer type: P6407 Ssqyh8 Number: 2 piece Dimensions: Width = 315 mm Height = 518 mm Weight: 1, 8kg Max volume: 31.5 l more
4
-COM 453- Offered here is a keg shelf of company P & D system technology. M0y72 The shelf has a drip pan below. Dimensions: approx. 313 x 140 x 300 cm (length x width x height) Shelf depth: 133 cm Only pick-up possible. You get a proper invoice with expelled VAT when purchasing Interest or questions, please register by E-Mail! more
2
1 syringe barrel KM 200 B2 built: 03.97 Diameter: 45 mm KM number: 17 112 Xdha3kfjd From the site: Schwäbisch Gmünd more
3

screws + barrel Reifenhaeuser BT 85

D - Baden-WürttembergGermany dealership location
6642 km
used
concerning description attached M29eikpl more
6
Power: 1.8 kw Voltage: 380 V AC B3soh2gi Speed range: 9... 30 U/min Opening drum: approx. 220 mm Deep drum: approx. 380 mm Diameter drum: 580 mm Volume: Old line with hardly any wear that is drum get very good approx. 65 litres. more
2

Ink Pumps Betz P 100-2

D - BrandenburgGermany dealership location
6679 km
1999
used
4 pneumatic paint pumps Betz 100-2 L for 200 kg drums with single serving and high pressure paint hose 2 m Ratio 21:1 maximum flow rate approx. 3,4 kg / min In making a color tube line direct supply of sheet-fed, Web rotary presses with medium and high viscosity printing inks is possible. Cbbobk3y In making a color tube line direct supply of sheet-fed, Web rotary presses with medium and high viscosity printing inks in the paint box is possible. more
3
Barrel volume: 4x5l, height: 840mm, width: 1080mm, depth: 850mm. 2qpqgq more
1

Barrel Lifter Tiger ED/K

DeutschlandGermany dealership location
6738 km
2003
used
Barrel diameter: 560mm, load: 360kg max., fork distance: 650mm, fork cross section: 150x60mm, tilting mechanism with endless chain, self-locking gear, barrel holder with eccentric closure, secured against unintentional slipping. B0ya2h9ck more
1
Elect./Voltage: 480 V, 60 Cy, 3 Ph. Bhx7jrf IMA Novimat Concept ... Model I/G80/230/R3, High Speed/Volume Production EdgebanderWorking Capacity: -- Edge Capacity: Edgebanding thickness 0.4 - 3.0 mm, feed speed 8 - 30 MPM (26 - 98 FPM) ~ Panel thickness 10 - 60 mm (0.394 - 2.362"); Min Panel width 65 mm (2.559"), min panel length 150 mm (5.905"). -- Custom Pre-Milling Unit: Fixed vertical single spindle with mechanical up/down, in/out adjustment. Designed to clean-up a poor saw cut or chi... more
6
Universal swivel milling machine vision UFM210 von Hoffmann from vocational school with 4 axis control, swivel angle of-45 to + 95 degrees and stepless speed adjustment Swivel milling machine in top facilities and only 43 hours of engine running A treat for any fan of Hofmann Positioning control in 4 axes for spindle height, spindle inclination, spindle depth and tripod height and tool management file It can be stored from 500 and 500 utilities All axes be dropped on the values stored i... more
5
grinding diameter:280 mm grinding length:630 mm centre height:140 mm swing diameter:295 mm centre distance:630 mm grinding wheel width:63 mm chuck diameter:125 mm grinding wheel diameter x bore x width:400 x 127 x 40 mm grinding wheel width:63 mm swing in open rest:70 mm swing in closed rest:70 mm swivel of workhead:90 ° diameter of used grinding wheel:250 mm bore in sleeve holding internal grinding spindle:80 mm chuck diameter:125 mm taper bore in tailstock barrel:3 Morse taper bore in workhead... more
5
x-travel: 4060 mm y-travel: 3000 mm z-travel: 1001 mm laser capacity: 1800 - 4000 W table length: 2 x 2700 mm Table width: 2 x 2150 mm control: Siemens Sinumerik 840D total power requirement: 90 kVA weight of the machine ca.: 12 t dimension machine [...]: 15x2,48x2,97 m dimensions electric cabinet LxWxH: 1,85x1,00x2,10 m dimension laser device LxWxH: 1,35x1,12x1,80 m dimension filtering system LxWxH: 1,6x1,25x2,80 m dimension HF- Generator LxWxH: 1,50x0,96x2,05 m dimension cooling device LxWxH:... more
5
tank system for Diesel / heating oil 2,000 litres tank drip pan CHEMO - year of construction 2008 Yrehcs barrel pump Horn with counter and nozzle performance of pump system 55 litres / minute electrical data 220 V space requirements length - 2,800 x depth - 880 x height - 2,300 mm weight approx. 420 kg more
1
Elect./Voltage: 575 V, 60 Cy, 3 Ph. Gvlvsg DONALDSON TORIT DFT 4-48 Cartridge Dust Collector. -- Specifications: Approx. 30,000 CFM 2.5:1 air-to-cloth ratio; Filter Cartridge System complete with: (48) Cylindrical cartridges, 254 sq. ft. cloth area per cartridge (Ultra-Web) for a total of 12,192 sq. ft. cloth area, 99.9% efficient down to 0.5 microns. -- Equipped with: Automatic continuous pulse jet cleaning via compressed air, (1) pulse valve per (2) cartridges, status of cartridges &... more
6
Sturdy swivel milling machine TFS1200 by Hoffmann from vocational school with stepless speed adjustment Drive motor 5 / 6, 2kW with automatic motor brake Jiblxrb R/L barrel Swivel angle from - 5 to 45 degrees electrically adjustable with digital display Height adjustment electrically adjustable with digital display and in Krems Valley display Speeds in 100 steps adjustable from 1000 to 10000 RPM Spindle diameter 30 mm Control Panel up, swivel Comfort fence with fine adjustment by Hand... more
6
combined surface planer / Thicknesser SCM FS 520 class Used, only few working hours, year of constr. 2009 very good condition planning width 520 mm jointer table length 2300 mm 4 cutter SCM Monoblock cutter with automatic fixing and self-regulation main motor 5 kWt, shaft diameter 120 mm takeoff max. 8 mm foldable comfort planer safety with pneumatic spring action foldable extra stop for comfort and safe processing of smaller working pieces pneumatic table adjustment pneu... more
6

Drum lifting and tilting unit BAUER RS 786

Leipzig 1 AußenbereichGermany dealership location
6734 km
1993
used
lifting capacity: 800 kg fork length: 1000 mm weight: 94 kg dimensions L x W x H: 1,3x0,66x0,95 m Bjqy0ne8u Barrel Transport Device for forklift trucks! more
1
Elect./Voltage: 480 V, 60 Cy, 3 Ph. Hpnrb82 CEFLA, EASY 2000 D ... 51" wide Finishing Line for Water and Solvent based UV Stain, Clear and Pigmented Sealer and Topcoat [...] Line was used for low volume, high-end (5) piece solid wood Raised Panel Cabinet Fronts!The Complete Line consists of:Position 1: CEFLA, Model TN 2500, loading belt [...] 2: CEFLA/SORBINI, Model VS 33/ACT-F, top panel [...] 3: CEFLA, Model EASY 2000 D. Reciprocating Spray [...] 4: CEFLA, Model FEV E3/4 - EEV EU2/4 + TT 1... more
6
Swivel milling machine T150 of SCM Drive motor 5,5 kW with automatic motor brake, new R/L barrel Swivel angle of - 10 to 45 degrees electrically adjustable with mechanical indication Height adjustment electrically adjustable with mechanical display, fine tuning with the tip button Speeds 3000, 4500, 6000, 7000, and 10000 RPM Spindle diameter 30 mm Shaper fence with fine adjustment SCM aluminium top JAWS with three Einlegelinealen 3-roll feed Haffner variable speed 3-24 m / min, R/L ro... more
14

Twin Screw Extruder Weber DS12.22

Elbestrasse 19 A, 46395 Bocholt, DEGermany
6353 km
1990
reconditioned (used)
We sell ex work D-41334 Nettetal (Germany) Bb8piwhept  1 Piece Twin Screw Extruder Weber DS12.22 Construction year: 1990, Serial-No.: DS120 079  reconditioned, with computer control system PMA vario EC103 with Touch-Screen Monitor, new installed in year 2015  incl. a second process unit (pair of screws and barrel), used in good condition Description: 1 Twin Screw Extruder, used and reconditioned Manufacturer: WEBER Type: DS-12.22 Construction year: 1990 ... more
5

Gross baler 88 to HSM HSMVK8515

26215 Wiefelstede, GermanyGermany dealership location
6385 km
2001
used
Ddjomkv more
4
approved for storage of flammable liquids natural ventilation of the dangerous liquids equipment by a circumferential air gap on three sides Gq93lcqu0 lockable gas-supported lid with toggle closure capacity: 2 barrels at 200 litres each, 1 one lying barrel 60 litres capacity of collecting tank 205 litres support for two barrels at 60 litres each bearing load 1,500 kg space required width - 1,400 x depth - 1,370 x height 1,460 mm height open 2,500 mm more
15

PELLETIZER forced feeding unit PREALPINA 105 mm.

VIA ANTONIO GRAMSCI 48, 13875 PONDERANO, ITItaly
6746 km
2018
reconditioned (used)
PREALPINA 105 mm 35 L/D For LLDPE LDPE HDPE PPL PS EPS ABS etc.average output :300-450 kg Forced feeding unit and 7,5 m3 scrap silo 105 mm Extruder 35 L/D with bimetallic barrel 4 kw vacuum pump for degassing 110 kw d.c. motor on extruder with driver Hydraulic screen changer Screening section mm.190 diameter, Hydraulic power unit Electrical cabinet Prealpina TP20 die face pelletizer Stainless steel cooling chamber. Water/granulate conveyor with stainless steel vibro- sifting unit. ... more
10

twin band saw WEINIG RAIMANN BK 60 TWIN

Rejencja Fryburg, NiemcyGermany
6610 km
2012
refurbished (used)
Feed speed 10-60 m/min Max. cut height 300 mm Crpc2oj Max. distance, saw blade - fence rollers 235 mm Max. feed unit opening 400 mm Min. distance between saw blades 10 mm Feed rollers, diameter 165 mm Feed rollers, height 300 mm Band saw wheel, diameter 1,080 mm Band saw wheel, width 100 mm Saw blade speed 42 m/sec Saw motor 22 kW Feed unit (frequency converter) 5.5 kW Waco IntelliCom PC control system with touch panel Standard Automatic positioning of feed unit / saw units Stand... more
7
Twin Screw Extruder, conical Manufacturer: CINCINNATI Type: CM-55 Year of manufacture: 1986 Serial no.: 16878/10 Screw diameter: 55 – 110 mm Screw length: 1195 mm Screw geometry: for Rigid-PVC-profiles Total screw torque: 6.439 Nm Bbi23k8m2w Screw speed: 1 – 34,7 1/min., stufenlos regelbar Drive motor: D.C. motor, thyristor-controlled Motor power: 23,4 kW Barrel: Heating zones 1-3, 8/4/3 kW Cooling zones 2 + 3 oil circulation with heat exchanger Tooling heating zo... more
4
pressure 400 t stroke 450 mm throat 450 mm work speed 2,1 m/min ajustment speed 9,5 mm/sec return speed 12,5 mm/sec pressure 320 bar diameter of piston 60 mm opening stroke 1100 mm table-size hinten / back 2500 x 750 mm Table dimensions Main 750 x 750 mm total power requirement 11 kW weight of the machine ca. ca. 20 t dimensions of the machine ca. 3,75 x 2,5 x 0,95 m The straightening and forming presses have been specially developed for straightening and bending profiles, bars and beams. ... more
2

Girder overhead travelling crane ABUS 200200/K

MöglingenGermany dealership location
6652 km
2015
good (used)
For sale are two ABUS cranes. Manufacturer: ABUS Type: girder overhead travelling crane Model: 200200/K Year of constr.: 2015 used, good condition Lifting capacity: 5 t Length 1: 9.065 mm crane Crane 2: 6.000 mm length Objects: Trolley, motor, barrel carrier (orange) The cranes were dismantled and stored at us. A visit is possible by appointment. Baueygfcot more
3
Suction- Tube: 180 mm Oil- drain- Tube: - mm voltage: 400 V Gxstord filter surface area: 7,6 m² : 1200 m³/h total power requirement: 1,1 kw weight of the machine approx.: 79 kg dimensions of machine: 1000 x 700 x 600 mm Other features separators: - filter chamber L: 520 x W: 420 x H: 520mm - coarse filter L: 520 x W: 48 x H: 480mm (washable) - fine filter barrel dia. 450x300mm, filter fleece mat - covering W: 450 x H: 520mm via hinged flap - suction opening Ø 180 x 45mm (floor) - exhaust open... more
6
Beltpress EB800 Processing performance (depending on layer thickness) Step 1: 1000-1300 kg/Std 2doz2h2td Step 2: 1500-1800kg/Std Machine dimensions: Machine length: 3350 mm Machine width: 1600 mm Machine height = top of mash box: 1670 mm (on wooden plank) Bandwidth: 800 mm Mica application width: 500 mm Barrel throw height: 1060 mm (on wooden pile) The machine currently stands on 25 cm high wooden poles and can therefore also be lowered. more
15
We offer from a business resolution Oil drip pan, collecting sump with grating - 200 L vol. see photo for 2 x 200 L barrels Gnynkzytu Manufacturer: unknown Usage area for the safe storage of up to two 200 l barrels Application approved for the storage of substances hazardous to water (water hazard class 1-3), combustible or inflammable liquids Capacity - 2 x 200 l barrels Grating - hot-dip galvanized, removable Execution - steel, painted Collection volume - 200 l Dimensions ... more
6

Table Rolling Machine Backservice TA 520

BabenhausenGermany dealership location
6588 km
2017
as good as new (ex-display)
Table rolling machine Model TA 520 Vlyjx7w Easy manual operation For all doughs for rolling out and touring Tables fold up Working width 500 mm Display Manual roller adjustment Left / right barrel Connection 400V, 1 kW, 16ACEE connector Dimensions: 1960 x 970 x 670 mm, WxDxH Dimensions in rest position: 970 x 1100 mm more
6
Drilling capacity in steel St 60 45 mm drilling capacity in GG 22 55 mm Drilling capacity 60 mm spindle mount MT 4 Table clamping plate 630 x 500 mm Throat depth 400 mm Speed range, infinitely 63-2000 RPM spindle stroke 220 mm 4 feeds 0.1 / 0.2 / 0.3 / 0.4 mm / Rev Column diameter 180 mm maximum distance spindle/table 720 mm maximum distance spindle and base plate 1250 mm Power 2,2 / 3,5 kW dimensions L x W x H 700 x 1100 x 2250 mm Weight 640 kg Bbjrpfd73e Accessories / special feat... more


barrel
every day

New machines via email!

Be informed!

to

to

Change search
BARREL
SELL IMMEDIATELY
on Europe's market leader for as little as € 0,49 per ad.
Find out more now


Phone: +44 (0) 20 806 810 84
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machineseeker chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close