Used Barmag for sale (11)

Condition: ready for operation (used), Barmag EAV133-0-160 BELTRO-DRIVE, serial number 9008-29845, used, shows normal signs of wear, 100% functional, scope of delivery as shown in the photos. Klolhji D T E Noccqnow

Condition: new, Barmag EAV133-0-110 BELTRO-DRIVE, serial number 9402-48656, unused, 100% functional, scope of delivery as shown in the photos. Klelhccei D T E Eoqnew

Condition: used, BARMAG extrusion system consisting of: 1x extruder BARMAG KEP 200-26,3,3-S 1x transmission gear KNÖDLER FZ 6000 2_Z-ED 200 - NEW, year of manufacture 2016 1x drive motor SIEMENS 1GG6208 with external ventilation 470V, 468A, 206kw, 2600rpm, Err. 310V, 6.8A - NEW, year of manufacture 2015 1x control unit 1x dosing unit SCHOLZ incl. Feed hopper with level sensor - year of manufacture 2004 System features: Kljlheuak Nloccqnew - Single-screw extruder, year of manufacture ca. 1973 - Throughput 800kg/h - Conversion to new drive + gearbox in 2016 - Screw diameter 200mm - Screw length 5266mm - Process length 26.3D - Geometry: feed - barrier - mixing section - Screw material: nitrided steel - Technical documents Subject to prior sale Please send inquiries by email only Note: The machine is still installed and can be inspected on site. The buyer must dismantle it himself and organize shipping. This is not part of the offer price.

Year of construction: 1997, condition: used, PILOT EXTRUSION SPINNING LINE POLYESTER Kjlhccqezl Hz Nonslw MAIN PART WAS DESIGNED BY FOURNE IN 1997 FOR DSM TO MAKE TRIALS OF POLYESTER AND POLYAMIDES, MONO & MULTIFILAMENT. >> EXTRUDER DETAILS : MANUFACTURER : FEP POLYMER YOC : 1997 TYPE : EX 25 - 25 D MAX. THROUGHPUT : CA. 7,0 KG/H (PA6), CA. 5,6 KG/H ( PP ) : CA. 8,2 KG/H ( PET ) NOMINAL SCREW DIA : 25 MM SCREW LENGTH : 25 X D SCREW GEOMETRY : SPECIAL 3-ZONE-SCREW MIXING TORPEDO : CHANGEABLE ATTACHED TO SCREW END , CA 3 X D LONG HEATING CAPACITY : CA. 3,2 KW / 4 ZONES DRIVE : CA. 4,5 KW, AS- MOTOR MIT SCHNECKENGETRIEBE ELECTRICALLY HEATED AND REGULATED TO MAX. 350 ° CELSIUS, EQUIPPED WITH 3 TEMPERATURE CONTROL SENSORS, OVER-TEMPERATURE MONITORING, WATER-COOLED FEED ZONE, REMOVABLE ISOLATION AND BASIC FRAME, INCLUDING INERT GAS IN THE INLET PIPE, EQUIPPED FOR THE SUBSEQUENT RECEPTION OF A TORQUE CLUTCH ON THE GEARBOX END >>> SPINBEAM & MELT PIPE : ELECTRICALLY HEATED SPINBEAM DESIGN : FOR 1 MONFIL OR 2 MULTIFILAMENT THREADLINES SPINPUMPS : 1 = 2 X 2.4CC , 1 = 1 X 2.4 CC , 1 = 1 X 0.6 CC SPINNERETTES : 42 / 59 / 72 >>> QUENCH CABINET : FEP Polymertechnik Gmbh YOC : 1995 TYPE : CROSSFLOW Plant Nr. : 7.1396 >>> WINDER : BARMAG TYPE : SW4S Auftragsnr : 10/0428 YOC : 1988 >>> DRAW – STAND : EDMUND ERDMANN GMBH TYPE : DRAWMOD 02/380-3/5/6 LM YOC : 1995 COM. NR : 13/2492 CONTROLS COMPUTER : EDMUND ERDMANN YOC : 1995 FABR. NR : 132492 >>> PREHEATING OVEN : HERAEAUS Gmbh Type : WU6100 , 500C , 3 Nipe, 400 V 11.4 A, 5.4 kW YOC : 1997 FABR. NR : 97/11055 >>> HOIST IN EXTRUDER AREA : HEBEZEUGFABRIK GMBH, YOC : 1998, CAPACITY : 0,7 TONS LIFTING HEIGHT : 0,8 M

Condition: ready for operation (used), Barmag A-406--0956 Beltro-Drive BDV433-0-19, serial number as shown in the photo, used, in good condition, 100% functional, scope of delivery as shown in the photos. Kolhei D T Ewsccqnolw

Condition: new, Barmag A-406-0956 Beltro-Drive BDV433-OS-19, serial number as shown in the photo, unused, 100% functional, scope of delivery as per photos. Klslhccoi D T Etjqnjw

Condition: used, Year of construction: 2000, functionality: not functional, CLEARANCE SALE WILL BE SOLD TO HIGHEST BIDDER ON 'FIRST COME - FIRST SERVE BASIS' ; IMMEDIATE SHIPPING POSSIBLE LIST OF OTHER MACHINES FROM SAME MILL AVAILBLE UPON REQUEST BARMAG EXTRUSION SPINNING LINE WITH 12 POSITION , 72 SPINNING ENDS FOR PET POY MICROFILAMENT YARN , evospeed Klelhjy Splgoccqnow • MANUFACTURER : BARMAG , GERMANY • AGE : INSTALLED IN 1998/ 9, STARTED UP IN 2000 ! BUT ONLY USED FOR 3-4 YEARS, THEREAFTER MAINTAINED & KEPT MOTHBALLED - 12 WINDERS, BARMAG CW6-1200/6 , 6 ENDS PER CHUCK 1 EXTRUDER BARMAG 12 E 8 • SPIN BEAM INCLUDING SPIN PACKS & SPIN PUMPS 3,5 CC/U • SPINNERETTES 100MM DIA, BOTTOM LOADED, DESIGNED FOR HIGH COUNTS MICRO & SUPERMICRO • POLYMER MANIFOLD EXTRUDER TO SPIN BEAM • DOWTHERM MANIFOLD FOR SPINBEAM AND POLYMER MANIFOLD • QUENCH SYSTEM INCLUDING FINISH SYSTEM, SPINFINISH JETS BY 'KYOCERA' • WITH CONVENTIONAL QUENCHING CABINETS + EVOSEPEED & RADIAL TYPE • TAKE UP UNITS, INCLUDING: • TAKE UP SECTIONS / PLATFORMS / LADDERS • COLD GODETS, ONE PAIR PER POSITION • INTERLACE SYSTEM WITH HEBERLINE INTERMINGLING JETS • YARN SUCTION SYSTEM • 12 WINDERS, BARMAG CW6-1200/6 , 6 ENDS PER CHUCK • + ONE SPARE WINDER

Condition: used, Year of construction: 1970, functionality: fully functional, BARMAG extrusion system consisting of: 1x BARMAG BA KEP 90-26.3-S extruder 1x BARMAG 9E4-11-103/Z transmission gear 1x AEG G 16.04 drive motor with forced ventilation, 460V, 112A, 46.7KW, 3150rpm, rated at 330V, 2.21A 1x SCHOLZ dosing unit, incl. Feed hopper 1x Control unit System features: - Single-screw extruder, built around 1970 - Throughput 200 kg/h - Conversion to new screw geometry in 2016 - Screw diameter 90 mm - Screw length 2769.5 mm - Process length 26.3D - Geometry: Feed - Barrier - Mixing section - Screw material: 1.8550, nitrided Kelhjuakzzoccqnslw - DC motor - Technical documentation This system is available in three versions. Subject to prior sale. Please send inquiries via email only. Note: The machine is still installed and can be inspected on site. The buyer must dismantle it and arrange shipping themselves. This is not included in the offer price.

Year of construction: 2017, condition: ready for operation (used), A spinning, drawing and winding line for the production of monofilament yarns, multifilament FDY and POY is available. Spinning positions: 24, yarn ends: 192, drafting: cold and hot godets, package change: without yarn breakage, number of godets heated/cold: 50/50, number of winders: 24 (+2 reserve winders). Including various spare parts for the machine and electronics. Documentation available. On-site inspection is possible. Kslhccqjuanq Tonolw

Condition: excellent (used), Year of construction: 2026, functionality: fully functional, Complete factory equipment for sale: weaving, embroidery, dyeing, finishing, and processing. Many more machines are available. Textile Department * Jacquard Weaving: 11 × Picanol looms, Model 2004, XC 870 (Belgian) * Air-Jet Jacquard Weaving: 8 × Picanol looms, Model 2004 XL * Air-Jet Jacquard Weaving: 6 × Picanol looms, Model 2004, 5400 Jacquard Bonas, Jumbo * Complete set of air compressors, dryers, and air tanks required for operating the weaving machines. * Dobby Weaving: 4 × Picanol Omni looms, Model 1999 * Air-Jet Dobby Weaving: 8 × 2004 looms, 2.5 m working width, suitable for producing linen, gabardine, and dress fabrics (Picanol Omni Plus) * Rapier Weaving Machines (Chinese): Model 2014 – 4 units * Modern Warping Machine: 720 / 11 cones – 1 unit * Karl Mayer Weaving Machines: Model 2021 – 4 units * Karl Mayer Weaving Machines: Model 2017 – 2 units * Sizing Machine: 3 units ⸻ Embroidery Department * Saurer Epoca Embroidery Machines: 4 machines, equipped with 5 special attachments * Spooling/Winding Machines: Belinda – 9 units * Spooling/Winding Machines: Barmag – 1 unit, Kaltema – 2 units * Complete set of air compressors, dryers, and air tanks required for operation. * Mouline Thread Production Line with all accessories (embroidery threads). ⸻ Finishing Department * Rams: 1 × Brückner, 6-chamber, with Mahlo, Model 2002 * Stenters: 3 Turkish Damson machines * Fabric Inspection Machine: 1 unit * Sewing Machines: 30 units * Fabric Pressing and Packaging Machine ⸻ General Factory Utilities Kolhccqjzi Aiqenslw * Industrial Chillers: 2 units * Steam Boiler: 6 tons, Riello burner, 2018 * Steam Boiler: 0.5 ton * Fabric Dyeing Jet Machine: 50 kg * Yarn Dyeing Machine (Hank): 600 kg * Yarn Dyeing Machine: 2 × 300 kg, complete with winding and unwinding system * Hydro Extractor: 1 for yarn + 1 for fabrics + 1 for hanks

Condition: like new (used), Year of construction: 2008, functionality: fully functional, Complete factory equipment for sale: weaving, embroidery, dyeing, finishing, and processing. Many more machines are available. Textile Department Kolsziz Dyjhccqnelw * Jacquard Weaving: 11 × Picanol looms, Model 2004, XC 870 (Belgian) * Air-Jet Jacquard Weaving: 8 × Picanol looms, Model 2004 XL * Air-Jet Jacquard Weaving: 6 × Picanol looms, Model 2004, 5400 Jacquard Bonas, Jumbo * Complete set of air compressors, dryers, and air tanks required for operating the weaving machines. * Dobby Weaving: 4 × Picanol Omni looms, Model 1999 * Air-Jet Dobby Weaving: 8 × 2004 looms, 2.5 m working width, suitable for producing linen, gabardine, and dress fabrics (Picanol Omni Plus) * Rapier Weaving Machines (Chinese): Model 2014 – 4 units * Modern Warping Machine: 720 / 11 cones – 1 unit * Karl Mayer Weaving Machines: Model 2021 – 4 units * Karl Mayer Weaving Machines: Model 2017 – 2 units * Sizing Machine: 3 units ⸻ Embroidery Department * Saurer Epoca Embroidery Machines: 4 machines, equipped with 5 special attachments * Spooling/Winding Machines: Belinda – 9 units * Spooling/Winding Machines: Barmag – 1 unit, Kaltema – 2 units * Complete set of air compressors, dryers, and air tanks required for operation. * Mouline Thread Production Line with all accessories (embroidery threads). ⸻ Finishing Department * Rams: 1 × Brückner, 6-chamber, with Mahlo, Model 2002 * Stenters: 3 Turkish Damson machines * Fabric Inspection Machine: 1 unit * Sewing Machines: 30 units * Fabric Pressing and Packaging Machine ⸻ General Factory Utilities * Industrial Chillers: 2 units * Steam Boiler: 6 tons, Riello burner, 2018 * Steam Boiler: 0.5 ton * Fabric Dyeing Jet Machine: 50 kg * Yarn Dyeing Machine (Hank): 600 kg * Yarn Dyeing Machine: 2 × 300 kg, complete with winding and unwinding system * Hydro Extractor: 1 for yarn + 1 for fabrics + 1 for hanks