Used Bar Peeling Machine for sale (71,007)

Year of construction: 2014, condition: excellent (used), functionality: fully functional, machine/vehicle number: 1400040685, Special Features: Retrofit to WIN10 – NEW – with 6 months warranty on computer and UPS Water-cooled spindle, 9.5 kW S1 3-layer machining possible Carefully cleaned and overhauled – excellent condition Description: Graphical operator guidance and graphical service support A-axis for stepless machining from above – swivel angle 180° HSC milling spindle for speeds up to 24,000 rpm Large machining width Standard with clamping detection and automatic clamp positioning 8 tool stations Complete profile machining with stationary profile bar Rapid basic positioning of the machining unit (up to 64 m/min) on the X axis Robust, low-wear direct drive Protective hood Digital axis controllers for all 4 axes with high-resolution measuring system 4-axis industrial PC control 2 1/2 D interpolation 15" TFT color screen Network connection RJ45 10/100 MBit Hard disk Full PC keyboard Remote maintenance via TCP/IP (requirement: internet access) Technical Specifications: Max. machining length without frontal machining: 7,600 mm Max. machining length with frontal machining: 7,500 mm (tool-dependent) Travel X-axis: 7,700 mm Travel speed X-axis: 65 m/min Travel Y-axis: 850 mm Travel speed Y-axis: 60 m/min Travel Z-axis: 650 mm Travel speed Z-axis: 60 m/min Swivel angle A-axis, freely programmable in 0.1° increments: 0 - 180° Positioning accuracy: X-axis: +/- 0.1 mm / 1 m Nlodpfx Aoy Ah Tkohkof Y-axis: +/- 0.1 mm Z-axis: +/- 0.1 mm A-axis: +/- 0.1° Max. spindle speed: 24,000 rpm Max. spindle power: 9.5 kW S1 Tool holder: HSK F 63 Max. cutter diameter: 80 mm Max. milling cutter diameter: 200 mm Compressed air connection: > 7 bar Voltage: 400 V, 3 PH, 50 Hz Fuse: 35 A 8 tool stations Included Accessories: Tool setting gauge 8 pneumatic material clamps Automatic clamp detection Dosing spray device Protective hood Front light barrier Side safety fences (left and right) Central chip extraction 2 pneumatic material stops 3-circuit clamping system Length measurement for profile bar Barcode scanner with wireless transmission Special version with light barrier Additional options available on request: Programming software (office) eluCad, incl. hotline contract for 6 months 3D import license for one machine of category "L" Data import license package for one machine of category "L" CSV import license for one machine of category "L" Macro hashing license for one machine of category "L" Other information: The machine is delivered ready for transport, including transport locks, loaded onto truck Additionally, we optionally offer the following services on request: Installation and commissioning Machine training 4/5-axis training package for machine and eluCad

Condition: new, Year of construction: 2026, functionality: fully functional, VKM - Peeling Machine PS2000 Wood diameter: 40 – 200 mm Peeling disc diameter: 458 mm Number of peeling knives: 8 Feed speed: 5 – 15 m/min Nledpfsv Uxm Tox Ahkjf Air consumption approx. 60 NL/min Peeling disc speed: 1500 rpm Peeling disc drive power: 15 kW Lower feed wheel drive power: 0.37 kW Upper feed wheel drive power: 0.37 kW Electrically adjustable raw wood diameter setting via foot switch, also possible during operation.

Condition: used, Year of construction: 1974, round bar steel 63 mm square edge steel 55 mm flat steel 100 x 25 mm engine 380 V, 6,3 kW weight ca. 2.450 kg +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. Nodpfx Ahshxzmcekslf +++++

Year of construction: 2026, condition: new, Hopper capacity: 40 [kg] Performance: Up to 140 [onions/min] Raw material size: 45 – 120 [mm] Overall width of the machine: 1700 [mm] Overall height of the machine: 2200 [mm] Overall length of the machine: 8500 [mm] Number of working lanes: 2 Onion loading height: 1000 [mm] Onion discharge height: 850 [mm] Waste discharge height: 400 [mm] Power supply: 3 x 400 [V] / 50 [Hz] Installed power: 3 [kW] Compressed air connection: 8-10 [bar] Air consumption: 1.9 [m3/min] Nodpfsd Nh Susx Ahkslf Noise level: Above 80 [dB] Material of construction: Stainless steel and food-grade plastics CE certificate: Yes Topping cutter: Yes

Condition: used, functionality: fully functional, Year of construction: 2005, Tone Hose Stripping Machine RI 180 - tested - includes accessories DN 6, 8, 10, 13, 16, 25, 32, 40 Nlodpsxwvf Ijfx Ahkof - shipping possible for an additional charge

Condition: good (used), Year of construction: 2006, Working height: 880 mm The machine was last used to process Helima's 26 and 45 rungs. It can be converted to process other types of rungs. Width: 700 mm Nlodpfx Ahoxlradjkjf Depth: 1200 mm Total height: 880 mm Weight: approx. 120 kg

Condition: good (used), functionality: fully functional, machine/vehicle number: Nr.72.092.010, spindle bore: 12 mm, Iemca CS112 No.72.092.010 Iemca Bar Feeder and Motor Round bars Ø 1 - 12.7 mm (3/64" - 1/2") Njdpfx Ahjrn I Dfjkjlf Supplied with guide sets for 4 mm and 12 mm and with 2 motors for Tornos M4 For 3 m bar lengths ON CLEARANCE SALE REDUCED PRICE! Hexagonal bars Ø 1.3 - 11 mm (3/64" - 7/16") Capacity: 28 bars Ø 7.5 mm - 16 bars Ø 12.7 mm Min. bar change time: 26 sec. (with 3200 mm bars) (mod. 32) Feed speed: 1000 mm/sec. Return speed: 1600 mm/sec. Supply voltage: 230/400 volts Installed power: 1.8 kW

Year of construction: 2006, condition: used, Rotox bar processing automaton type SBA 485 Njdpfx Aoyliq Uohkslf

Condition: good (used), Year of construction: 2006, Working height: 890 mm The machine was last used to process Helima's 26 and 45 rungs. It can be converted to process other types of rungs. Width: 900 mm Depth: 1200 mm Nlsdpfx Aexlriljhkjf Total height: 1100 mm Weight: approx. 120 kg

Condition: good (used), Year of construction: 2006, Working height: 900 mm The machine was last used to process Helima's 26 and 45 rungs. It can be converted to process other types of rungs. Nodpfxexmgure Ahkslf External dimensions: Width: 800 mm Total height: 1170 mm Depth: 900 mm Weight: approx. 120 kg

Year of construction: 2010, condition: new, functionality: fully functional, Technical specifications: • Manufacturer: JMC Recycling Systems Ltd. (England) • Model: Dolphin 5005-Lite • Year of manufacture: 2010 • Connection: 380–415 V, 3-phase • Recommended hydraulic oil: ISO 46 • Robust construction, mobile on wheels • Includes control unit and hydraulic drive Nlsdpfxoxm Uf Ss Ahkof Condition: • NEW, unused • Only storage marks present (see pictures) • No operating hours

Condition: used, Manufacturer: Hobart Type: Washing machine Model: UPT 10 Capacity: 130 liters Njdpot Up Spefx Ahkslf Universal dishwasher: 120 sec 240 sec 280 sec Height: 2417 mm Width: 945 mm Length: 1435 mm Voltage: 400V 50Hz 3N Power: 24.5 kW 39.4 A Sertifikat: IP X4 Main material: Stainlees Steel

Condition: new, power: 110 kW (149.56 HP), Year of construction: 2025, Bauxite Crusher: Bauxite is an aluminum ore, and crushers or mills are used to break down the bauxite into smaller pieces for further processing. Jaw crushers, impact crushers, or cone crushers may be used for this purpose. Granite Crusher: Granite is a hard and durable natural stone. Crushers used for granite crushing typically include jaw crushers, impact crushers, and cone crushers. These crushers can handle the varying hardness of granite and produce different sizes of crushed products. Bentonite Crusher: Bentonite is a type of clay with excellent water-absorbing and plasticity properties. Crushers such as jaw crushers or cone crushers are used to break down the bentonite into a manageable size for further processing. Barite Crusher: Barite, also known as baryte, is a mineral consisting of barium sulfate. Crushers like jaw crushers and cone crushers are commonly used in the crushing process of barite. Impact crushers may also be used for shaping and processing finer particles. For each of these minerals, the selection of the appropriate crusher depends on factors such as the hardness of the material, the required final product size, and the specific characteristics of the deposit. It's also important to consider whether a primary crusher, secondary crusher, or even tertiary crusher is needed in the processing flow. Additionally, for certain applications, grinding mills may be employed after the initial crushing stage to further reduce the size of the particles. Grinding mills suitable for these minerals might include ball mills, Raymond mills, or vertical roller mills, depending on the specific requirements of the process. Nedpsq Nx Apefx Ahkjlf Remember that the choice of crushers and mills is often part of a larger mineral processing plant design, and the selection process should take into account the overall production requirements, mineral characteristics, and economic considerations.

Condition: new, input voltage: 400 V, Operates on electricity. Fully constructed from AISI 304 18/8 Cr-Ni stainless steel sheet. Features a body reinforced with 25*25*1.2 mm stainless steel box section tubing. Ceramic heating elements are arranged in horizontal rows and can be controlled individually. The unit comprises 5 rows, each with 3 heaters, allowing each element to be replaced independently if necessary. Each machine is supplied with a large AISI 304-grade tray designed to collect fat and prevent drippings from sliced meat. Every tray includes an AISI 304-grade perforated plate to conceal fat drippings. Standard delivery includes 1 skewer, 1 shovel, 1 fat collecting tray, and 2 securing pins. A switch is fitted to reverse the skewer's rotation direction for left- or right-handed operation. Equipped with a special, high temperature-resistant (ld/d) motor mounted at the base of the unit. The device features a fused socket outlet for connection of an electric knife. The skewer's inclined design ensures a constant gap between meat and the heaters. Uniform and rapid cooking is achieved through surround ceramic heaters and a highly conductive ROBAX glass panel mounted in front of the heating elements. The heat-resistant, hygienic ROBAX glass prevents fat from reaching the heaters, ensuring safe operation. Specifications: Heat capacity 9 kW, electrical supply 380-400V 3N AC 50-60Hz, cable cross-section 5*2.5 mm², doner meat capacity 75–90 kg, skewer length 750 mm, dimensions 632*772*1132 mm, net weight 51 kg. Njdpfx Asx Aix Sohkslf

Condition: used, Automatic rebar mesh welding machine MCC001 The machine is designed for welding steel reinforcement mesh from previously shortened reinforcements for rods that comply with the EN 10080 standard. Technical data: Diameter of reinforcing bars: 4mm, 5mm, 6mm Number of longitudinal bars: 2 – 12 Length of longitudinal bars: 200mm – 3000mm Minimum step between longitudinal bars: 100mm Pitch of crossbars: 10mm – 999mm Length of crossbars: 100mm – 1250mm Screen moving speed: 0.1m/s – 1m/s Compression force: 60kg – 190kg Productivity: 1 cycle/minute Electricity: Supply voltage: 400V Voltage frequency: 50Hz Connection type: TN-C Power: 100kVA Higher engine power: 0.8 kW Power of one welding transformer: 35 kVa Pneumatic indicators: Nedpsymcpyefx Ahkslf Working medium: Compressed air Working pressure: 6 bar Air consumption: 250 l/min Cooling: Cooling type: water cooling Circulation type: forced circulation Maximum incoming heat carrier temperature: 35 °C Heat carrier consumption: 60 l/min Diameter of reinforcing bars: 4 mm, 5 mm, 6 mm Number of longitudinal bars: 2 – 12 Length of longitudinal bars: 200 mm – 3.000 mm Minimum step between longitudinal bars: 100 mm Pitch of crossbars: 10 mm – 999 mm Length of crossbars: 100 mm – 1250 mm Screen moving speed: 0.1 m/s – 1 m/s Compression force: 60 kg – 190 kg Productivity: 1 cycle/minute Supply voltage: 400 V Voltage frequency: 50 Hz Connection type: TN-C Power: 100 kVA Higher engine power: 0.8 kW Working medium: Compressed air Working pressure: 6 bar Air consumption: 250 l/min Cooling type: water cooling Circulation type: forced circulation Heat carrier consumption: 60 l/min

Condition: used, Legi-Air 4040Z with Zebra110pax4 label printer and pneumatic stamp. RA1933 Printer manufacturer: Zebra Printer type 110pax4 Control panel: LCD display with status indicator and buttons Print type: thermal transfer printing or direct thermal printing selectable Interfaces: RS 232 Seriel, IEEE 1284 Print media: standard media, tags and RFID media (reading and coding of RFIF labels) label length min: 12,7mm width print media: 16-114mm ribbon width: 25,4-107mm Ribbon length max: 900m Roll size diameter core: 25,4mm Nodpfsk Abllox Ahkelf Roll size maximum diameter: 101.6mm Resolution: 203 dots/inch (8 dots/mm) dot size 0,125mm x 0,125mm Print speed: 12 inch/second

Year of construction: 1993, condition: used, Two identical Dreher centrifugal drum machines are offered. Number of drums: 4, total volume: 20l, drive power: 1.5kW, direction of rotation: clockwise/counterclockwise, speed control: continuously variable. Machine dimensions: approx. 1200mm/1000mm/1600mm, weight: 280kg. An on-site inspection is possible. Nsdpfx Aezv T I Dshkolf

Condition: as good as new (ex-display), Year of construction: 2026, functionality: fully functional, Rebar bending machine / Bending machine B 50 – exhibition model COMPLETE TECHNICAL SPECIFICATIONS – SEE PHOTO - CE marking Nodpfx Aszvy S Nehkelf - Incl. bending pins / stop / bending sleeves - Bending capacity max. 50 mm / diameter (single bar) - Foot switch - Complete documentation - Bending via program or individual bends Dimensions: L x W x H 1.3 x 0.9 x 1 meter / Weight 500 kg Errors and omissions excepted.

Year of construction: 1997, condition: ready for operation (used), Machine is fully refurbished & ready to work with dedicated inspection table ( size 2500 mm long x 850 mm width ), we have more if you need in your factory, price for two or more machine could be under negotiate. Njdpoxcal Aofx Ahkelf The large onion peeler from M&P engineering tops, tails and peels onions of 45mm to 115mm diameter using self adjusting floating knife assemblies over a range of up to 25mm on any one setting. It then slits the onion horizontally from top to tail, the depth of slit is determined by onion quality and grade. The machine finally removes the skin using compressed air providing an end product of optimum appearance.

Condition: excellent (used), Catalog number: 8058 TECHNICAL DATA - max. log diameter approx. 750mm - main engine 55kW ADVANTAGES Njdpfx Ahezpwryskelf – German-made – for debarking logs – used debarker, very good condition – machine equipped with a feeder and an outfeed – video showing the machine in operation *This is a courtesy listing – the machine is located at a sawmill 15 km from the company's headquarters. Net price: 105,000 PLN Net price: 25,000 EUR, depending on the exchange rate of 4.20 EUR (Prices may vary due to fluctuations in the exchange rate)

Year of construction: 2012, operating hours: 25,967 h, condition: used, functionality: fully functional, machine/vehicle number: 2525, We offer this used COGEIM TA 30 BANFI TA 30 drum-type shot blasting machine, manufactured in 2012. Machine type: TA30-2892 Serial number: 2525 Year of manufacture: 2012 Minimum air pressure: 5 bar Maximum air pressure: 8 bar Nljdszrwy Njpfx Ahksf Weight: 18,000 kg If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: ready for operation (used), Year of construction: 1999, A Söderhamn Eriksson log debarking machine with infeed and outfeed units, but without electrical equipment (control cabinets), is available. Feed speed: 75m/min, Log diameter range: 110mm-750mm, Rotor speed: 222rpm, Rotor motor power: 75kW, Feed motor power: 2.2kW, Hydraulic power unit: 1.5kW. The rotor of this machine was replaced with a factory-overhauled rotor in 2021. Documentation available. An on-site inspection is possible. Nlsdpfjruq Dfsx Ahkef

Condition: used, Year of construction: 1997, VK 550 Combi 3R Debarker-Reducer Combination VK 550 frame with one ring reducer rotor and two counter-rotating debarker rotors. Debarker rotor opening: 620 mm. Service-friendly pull-out rotors for quick and safe maintenance. Ring changer for reducer ring. Nodpfx Aow Hy E Tjhkolf

Year of construction: 2025, condition: refurbished (used), Complete peeling line WDHF35/50/75 AS NEW, will be supplied revamped & tested in our workshop. Function and h9 tolerance guaranteed. Working range Entry diameter: 7 - 38 mm Finishing diameter: 6 - 35 mm Bar length min.: 2,9 m (3,2 m at max. feeding speed) Bar length max.: 6,5 m Feeding speed: 4 - 50 m/min progressively adjustable Cutting head RPM: 675 / 1330 / 4500 rpm progressively adjustable Nledpfx Ahsymb Uuekjf Scope of supply KIESERLING WDHF 35/50/75 as described above, composed by: - Entry roll conveyor - Feeding rolls - Peeling machine - Exit carriage - New output pinch-roll - Exit channel - Revamping in our workshop - New hydraulic system - New lubrication system - New pneumatic - New electrical equipments - New complete set of tooling & consumables SAAR-HARTMETALL - Optionnal: Laser diameter control system for tool correction Entry diameter: 7 - 38 mm Finishing diameter: 6 - 35 mm Minimum bar length: 2,9 m (3,2 m at max. feeding speed) Maximum bar length: 6,5 m Feeding speed: 4 - 50 m/min progressively adjustable Cutting head RPM: 675 / 1330 / 4500 rpm progressively adjustable

Condition: used, Year of construction: 1991, machine/vehicle number: R58, Used isobaric filler Machine Bertolaso 11000 bph year of the remark of isobaric filler 2021 suitable for bottling sparkling and semi-sparkling wines Njdpfxjvguv Ue Ahkjlf entrance on the left completely overhauled isobaric filler in all its parts with original Bertolaso spare parts (documentable) bottle sizes 85, 88, 90, 112 6 sets of channels with isobaric filler to make the levels the electrical panel of the Used Isobaric Filling Machine according to CE standards use and maintenance manual, spare parts manual available for this isobaric filler the production speed of isobaric filler is 9000 BPH with the sparkling wine the production speed is 7000 BPH with spumante. This isobaric filler is immediately available and delivered in case of purchase. We can assist the buyer in each step of the commissioning and testing operation of the Used Isobaric Filling Machine. How to build one isobaric triblock: The isobaric filler can be connected either to an automatic rinsing machine or to one or more cappers. We have 40 Bertolaso SBR grippers and two series of Bertolaso mushroom and satin cappers. One has 6 heads and reaches 9.000b / h, and one has 10 heads and reaches 14.000 BPH We can introduce all the machines in a sterile clean room with a filtration system. You can have the performance of an isobaric triblock with a Used Isobaric Filling Machine for natural cork and mushroom. Productivity can be from 11,000 to 14,000 BPH. It is possible to foresee a periodic maintenance program for isobaric filler to always have excellent efficiency. This involves both having spare parts in stock and foreseeing machine stops for a week/10 days. In case of purchase of the isobaric filler triblock, at least 9.00 meters by 2.50 meters, H 4.00 meters are required. The creation of a clean room guarantees the absence of contamination in the bottling phase.