Used Bar Equipment for sale (48,933)

Condition: used, Brand : LNS QUICK LOAD SERVO Total length: 2570 mm Total width: 1340 mm Depth of the bar feeder: 1000 mm Height: 1240-1520 mm Axis height: 900-1180 mm Retraction device: 600 mm Minimum diameter: 6 mm Max. diameter: 80 mm (depending on settings 90mm) Min.bar permissible length: 150 mm Max. Bar permissible lenght: 1470mm (Depending on settings 1500 mm) Max. permissible bar weight: 60 kg Pneumatic feeding: 5 Bar Maximum tyre wear: 6 litres (per loading cycle) Supply voltage: 220-480 volt/ 50 Hz-60Hz Maximum current: 1 A Maximum thrust: 167 Nm Hfodpfxozl E Eaj Aa Eei Maximum feed rate: > 100 m/min Charging time: 8- 12 sec Loading time for short parts: 4-7 sec

Condition: good (used), Year of construction: 2008, Parts shown by hand not come. Hfsdpfx Aozl D Hpoa Eoi

Condition: excellent (used), Year of construction: 2017, 1 used steam boiler Hodpozltalefx Aa Eefi Manufacturer: Bosch Type: U-MB 2020 Capacity: 2,000 kg/h Permissible operating pressure: 13.0 bar Increased test pressure: 24.1 bar Maximum temperature: 195°C Total volume: 2,065 l Year of manufacture: 01/2017 CE marking: CE 0036 Equipped with a Weishaupt gas burner, type WM-G20/3-A, 300-2,000 kW, ZM-LN design, 15-500 mbar, gas control system, separate control cabinet, Loos Boiler Control LBC boiler control system, feed water pump, Eco Type 1, capacity 89 kW, volume 41 liters, temperature 238°C, permissible operating pressure 31 bar, test overpressure 56 bar, and the existing coarse and fine fittings.

Condition: refurbished (used), Year of construction: 2006, functionality: fully functional, Manufacturer: Kallfass GmbH Type: Compact shrinking machine KC 5040/450 Universal Year of manufacture: 2006 Technical data: Hjdpfx Aozlrqpoa Eofi Welding frame dimensions: 500 x 400 mm Film roll width: max. 550 mm Working height: 870 - 970 mm Power connection: 380 V three-phase Easy-to-operate angle welding machine, combined with a shrinking tunnel. Particularly robust design for industrial use. Welding frame dimensions 500 x 400 mm. Proven impulse sealing technology with Teflon-coated separating wire for an absolutely odorless operation. Equipped with a sealing mechanism as a clamping system to ensure accurate adherence to the set sealing time and for problem-free separation welding, even with thick films. Inspection and demonstrations are possible by arrangement in our premises. Functional guarantee, no warranty.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 020849GA07, bar length: 3,200 mm, bar diameter (min.): 5 mm, bar diameter (max.): 51 mm, Very good IEMCA Boss 551E Bar feeder. The Boss is the bar feeder for long bars which has been sold the most in the world with more than 30,000 installed units. The Boss 551 Easy is an automatic bar feeder suitable for lathes with fixed and mobile headstock. Round bars: 5 – 51 mm Hedpfozlh I Djx Aa Eofi Hexagonal bars: 5 – 44 mm Square bars 5 - 36 mm Bar length: 3200 mm Max. spindle diameter: 65 mm Remnant length 400 mm Bar changeover time 31 sec. (for bar length 3200 mm) Loader weight: 830 kg Year: 2008

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 021828GA01, bar length: 3,200 mm, bar diameter (min.): 5 mm, bar diameter (max.): 51 mm, total length: 3,802 mm, total width: 605 mm, total height: 1,680 mm, overall weight: 820 kg, An excellent bar feed the BOSS 552 HD is an automatic bar feeder able to support bars from 5 to 51 mm, ideal to work with either fixed or sliding headstock lathes. Round bars 5 – 51 mm Bar length 3200 mm Bar changeover time 19 sec. (for bar length of 3200 mm) Hexagonal bars 5 – 43 mm Square bars 5 – 36 mm Remnant length 400 mm Bar weight Max 55 kg Reversible magazines Yes Compressed air 8 bar Feed rate 750 mm/sec. (adjustable) Installed power 2 kW Number of spindles 1 Hjdpfx Aezlhzqja Esfi Return speed 1200 mm/sec. (adjustable) Operating Voltage 230/400 V

Condition: like new (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 19115035, type of input current: three-phase, The cylindrical milling machine can be used to produce finished diameters ranging from 40 to 160 mm. The four cutter heads are continuously adjustable and each carries a finishing cutter and a roughing cutter. The drive motor for the cutter head has a power output of 30 kW, and the feed motor has a power output of 3 kW. Hfjdpfx Aszlhamsa Eji

Condition: new, Year of construction: 2022, Kaeser screw compressor SK 22 - 11 bar - exhibition piece - Volume flow at 11.0 bar (g) 1.67 m³/min Electrical power consumption of the entire system at 11.0 bar (g) 13.7 kW Max. overpressure 11.00 bar Drive motor efficiency at full load 91.2% Drive motor efficiency class IE3 Drive motor rated power 11.0 kW Drive motor speed 2960 rpm Drive motor protection class IP 55 Electrical supply 400V / 3 / 50Hz Compressed air outlet temp. above ambient temperature (at +20°C, 30% relative humidity) 6 K Sound pressure level 66 dB(A) Hjdpfjvk R Dcsx Aa Ejfi Max. usable warm air volume 2500 m³/h Compressed air connection G 1 Cooling oil capacity 7.0 l Cooling oil type compressor SIGMA FLUID MOL Dimensions (W x D x H) 750 mm x 895 mm x 1260 mm Weight 312 kg Location: from stock 54634 Bitburg - available immediately -

Condition: good (used), Year of construction: 2006, Previously installed on a Gildemeister TWIN 65 Hfedpfezk E Irex Aa Eei Maximum bar length: 3,300 mm Material feed slide length: XLL Maximum slide extension: 1,670 mm (with the shortest intermediate tube) Capacity: Multi-surface magazine: 4 x 400 mm (1,600 mm contact area) including guide channels: Ø 46 + 66 mm

Condition: used, all stainless steel suitable for thermal oil heating nett belt length 6.000 mm nett belt width 600 mm adjustable speed sediment removal system filter mechanical hoists overall dimensions (l x w x h) : ± 7.700 x 2.200 x 2.200 mm Hsdpfxjzk Dxce Aa Eefi with oil circulation pump

Condition: used, mileage: 547,506 km, power: 184 kW (250.17 HP), first registration: 12/2015, fuel type: diesel, tire size: 285/70R19,5, axle configuration: 4x2, wheelbase: 5,600 mm, fuel: diesel, color: white, gearing type: automatic, emission class: euro6, suspension: steel-air, loading space length: 7,780 mm, loading space width: 2,490 mm, loading space height: 2,630 mm, Year of construction: 2015, Equipment: air conditioning, electric window regulation, spoiler, tail-lift, Tyre size: 285/70R19,5 Front axle: Suspension: leaf suspension Rear axle: Double wheels; Suspension: air suspension Drive: Wheel Empty weight: 8.360 kg Carrying capacity: 7.640 kg GVW: 16.000 kg Tail lift: BAR CARGOLIFT, slider lift Hfjdozl Sg Djpfx Aa Eji = Additional options and accessories = - Roof spoiler - Spare wheel

Condition: like new (used), functionality: fully functional, Year of construction: 2021, Essentially consisting of: Hjdsq Tcmvopfx Aa Esfi Feed hopper (20 and 95 cbm), SANDVIK H-2000 cone crusher, double-deck screening plant, various conveyor and stockpile belts, power generator (300 kVA), electrical installation with control cabinet installed in container, storage silo, dust atomization system

Condition: excellent (used), functionality: fully functional, • Muratec MT 25 MYY / Gantry Loader / Bar Loader. • Two C-axes. • Two Y-axes. • Highly automated machine. • 8 kg gantry loader robot system for part loading and unloading. • 1.5-meter CNC bar feeder. • Machine with 9 controlled axes. • Two twin spindles. • Two turrets. • Turrets with 15 positions each, all motorized. • Integrated spindle motor: 15 kW. • Motor starting torque: 420 N·m. • Motorized tool drive: 4 kW. • Spindle nose: A2-6. • Maximum turning diameter: 370 mm. • Maximum turning length: 920 mm. • Bar capacity: 67 mm. • Prismatic guides on all axes. • Two Kitagawa 250 mm hydraulic chucks per spindle. • Separate compartment for the inspection of machined parts. • Automatic finished-part pickup arm for small parts. • Automatic secondary spindle cleaning with air or coolant. • Conveyor belt for finished parts. • Automatic load monitoring and tool wear detection. Hfedpfszl Rflex Aa Eoi • Automatic inter-spindle part transfer system with torque control. • Fanuc CNC. • Fanuc motors, servos, electronics, and controls. • Rapid traverse speeds: 20 and 25 m/min. • Main spindle speed: 3,500 rpm. • Motorized tool speed: 3,000 rpm. • Turret indexing time: 0.2 seconds. • Rear-mounted, hinged chip conveyor. • Complete set of static tool holders for external and internal machining included. • Complete set of motor-driven axial and radial tool holders included. • Machine currently in operation. • Weight: 10,800 kg. • Immediate availability, unless previously sold.

Condition: new, functionality: fully functional, power: 450 kW (611.83 HP), fuel type: electric, Year of construction: 2026, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE FABO MCK-115 is the biggest model of MCK series, those are a mobile type & closed circuit crushing and screening plants that is used for processing of hard materials such as basalt, granite, gabbro, dolomite and other types of hard stones. MCK-115 includes two stages of crushing process which is made by primary jaw crusher and secondary cone crusher. TECHNICAL SPECIFICATIONS: - Bunker: 35 m3 - Plant Dimensions (1st chassis): 13000x4700x4400 mm - Second chassis: 19620x4619x4364 mm - Production Capacity: 180-300 Tons Per Hour - 1st Crusher: Jaw Crusher – 1100x850 mm - 2nd Crusher: Cone Crusher – FABO CC 300 - Maximum Feeding Size: 800 mm - Vibrating Screen Size and Deck: 2200x5000mm 3-4 decks - Total Motor Power: 450 Kw - Generator (optional): 600 kvA MCK-115 IS A COMBINATION OF: • Bunker(Hopper) • Vibrating Grizzly Feeder (bypass) • Primary Jaw Crusher • Cone Crusher • High Stroke Type Vibrating Screen • Folding type feeding, feedback, bypass and stock conveyor belts • Hydraulic feet • Mobile Chassis with axles and tires • Fully Automation System • Dust Suppression System • Easy walking platforms for maintenance • Diesel Generator (Optional) Hjdpfx Aezl N Tbea Esfi FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: used, Year of construction: 2000, functionality: fully functional, input voltage: 380 V, temperature: 250 °C, inner dimension length: 1,000 mm, inner dimension width: 1,000 mm, inner dimension height: 1,500 mm, For sale: Eliogtherm Kelvin curing oven / industrial dryer. Comparable to TRO ovens, Reinhardt ovens, or those from Nabertherm. This high-quality dryer is suitable for drying and curing paints, coatings, powder coatings, and screen prints at temperatures up to 250°C. The oven is also ideal for preheating materials. It is approved for drying solvent-based materials. The exhaust air is monitored by a pressure sensor. The oven is very well insulated, not only on the walls but also on the base. Intake air is filtered through a large filter to prevent dust particles from entering the chamber. Internal dimensions: 1000 mm x 1000 mm, height 1500 mm. Comprehensive documentation is included (manuals, wiring diagrams, etc.). The oven is currently stored at our warehouse near Cham in the picturesque Bavarian Forest—a visit is definitely worthwhile! We can arrange shipping by freight forwarder upon request. Loading with a forklift onsite is not a problem. Hfodpsy Svqiofx Aa Eoi If you have any questions, please feel free to contact us.

Condition: used, mileage: 59,439 km, power: 85 kW (115.57 HP), first registration: 08/2018, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 08/2026, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, loading space volume: 14 m³, loading space length: 3,100 mm, loading space width: 2,325 mm, loading space height: 2,080 mm, Equipment: ABS, central locking, electronic stability program (ESP), soot filter, tail-lift, Vehicle No. for customer inquiries: 214 ----Tail lift: * Bär Carolift 750 kg * Wheelbase: 3,000 mm * Load compartment: L: 3,100 mm W: 2,325 mm H: 2,080 mm ----Special equipment: * Storage compartment on dashboard with USB connection * Audio system: Radio with CD player, MP3 capability, USB and Bluetooth hands-free system * Rear axle suspension: Parabolic (reinforced) * Switch for lighting in the load compartment ----Standard equipment: * Airbag, driver side * Trailer socket preparation * Anti-lock braking system (ABS) * Anti-slip regulation (ASR) * Drive type: Rear-wheel drive * Model: S-series * Exterior mirrors, electrically adjustable and heated * Brake assist * Electronic brake-force distribution * Electronic stability program (ESP) * Front axle suspension: Transverse leaf spring * Power windows * Windshield and side windows tinted * Generator 150 A * Speed limiter 160 km/h * 6-speed transmission * Body/superstructure: Standard platform body * Instrument cluster with pixel matrix display * Fuel tank: 70 liters * Headlight range adjustment * Engine 2.3 liters - 85 kW Diesel * Radio preparation with speakers * Wheelbase 3000 mm * Diesel particulate filter * Low emissions according to Euro 6 emission standard * Power steering * Seats in the cab: Double passenger seat with headrests * Daytime running lights * Maintenance indicator * Immobilizer * Central locking with remote control * Permissible total weight: 3.50 t ----Technical data: * Wheelbase: 3,000 mm * Load compartment dimensions: L: 3,100 mm W: 2,325 mm H: 2,080 mm * Payload: 953 kg * Tire size: 225/65R16C ----German vehicle! Hfedpfxeyvmypj Aa Eoi * €14,850 net plus VAT * TÜV (technical inspection) valid until 08.2026 * In the event of export to third countries or the EU, a deposit will be retained. This will be refunded to the buyer after successful customs clearance or delivery. * Worldwide delivery possible - please ask us for your individual offer! * We will gladly accept your used vehicle in part exchange! * Financing/leasing also possible in difficult cases * This description serves only for general identification of the vehicle and does not constitute a guarantee in the legal sense of purchase law. * The information does not claim to be complete. The information/descriptions/pictures provided are non-binding and do not constitute guaranteed characteristics. * We assume no liability for errors and obvious mistakes. * The buyer is obliged to independently verify the condition and equipment of the vehicles before purchase. * Subject to price changes, typographical errors, mistakes and prior sale. * Dear customer, please understand that due to the age and mileage of the vehicle, we prefer to sell it to commercial businesses or dealers. Thank you very much. * We speak: * Greek / Miláme Elliniká Tel: +49.162.6567750 * Russian / My govorim na Russkom Tel: +49.171.2767737 * WhatsApp/Viber: Tel: +49.162.6567750 * E-mail: * * Internal number: 214

Condition: excellent (used), Year of construction: 2018, Rod diameter: 10 – 65 mm Maximum rod length: 3,000 mm Hsdpozkwcnefx Aa Eofi Multi-track material support

Condition: used, Year of construction: 2000, bar material dia. 5 - 80 mm Bar length 250 - 1.550 mm bar length 1.550 mm longitudinal feed 600 mm height adjustment 775 - 1.175 mm dimensions of the machine ca. 2,25 x 1,10 x 1,80 m weight of the machine ca. 0,5 t Bar Feeder SAMSYS - Multisam MUS 2000 Hedpfozkvt Eex Aa Ejfi - NOT TESTED - for parts

Condition: used, gearing type: other, fuel type: gasoline, first registration: 01/1990, emission class: none, suspension: other, Year of construction: 1990, operating hours: 2,078 h, driver cabin: other, * 2078 operating hours * New flails left and right * 2 pcs. new power belts Hfjdpsy Hbw Djfx Aa Eei * 4 pcs. new PTO shafts * 1 pc. new tensioner pulley ... Used vehicle, incl. VAT.

Year of construction: 2021, condition: good (used), functionality: fully functional, travel distance X-axis: 4,176 mm, travel distance Y-axis: 1,040 mm, travel distance Z-axis: 540 mm, controller manufacturer: ELUMATEC, controller model: SBZ 122-ELUCAM, power: 17.5 kW (23.79 HP), input voltage: 400 V, input current: 24 A, feed rate X-axis: 120 m/min, feed rate Y-axis: 60 m/min, feed rate Z-axis: 30 m/min, positioning accuracy: 0.1 mm, spindle speed (max.): 20,000 rpm, tool length: 150 mm, number of slots in tool magazine: 12, ELUMATEC 122/73 CNC bar machining center - Frequency: 50/60 Hz - Max. machining length without end-face machining: 4050 mm Hodpfx Aaezktdze Esfi - Machining direction (front and back) - Disc cutter diameter: 120 mm - Clamping cylinder displacement, automatic - Tool holder: HSK-F 63 Note: The item must be collected between September 22nd and September 24th, 2026, on a date to be agreed upon. FCA D-76227 Karlsruhe - loaded onto a truck.

Condition: ready for operation (used), Diameter range: 45 mm – 114 mm Height range: max. 238 mm Hedsyq Nv Ispfx Aa Ejfi Label height: 23 mm – 230 mm Label length: 117 mm – 380 mm Production capacity: up to 50,000 cans per hour

Condition: ready for operation (used), Year of construction: 1996, functionality: fully functional, machine/vehicle number: 6296075, Technical specifications as per original manufacturer: Diameter range: 57 mm - 110 mm Label height: 25 mm - 235 mm Label length: 190 mm - 430 mm Production capacity: up to 300 c.p.m. Tooling for approx.: 73 mm Hfodjtql Hdopfx Aa Esi Labels: wrap-around labels

Condition: ready for operation (used), Diameter range: 50 mm - 135 mm Height range: 80 mm - 340 mm Heads: 10 Production capacity: 2,500 - 6,500 cans per hour Label length: 40 mm - 130 mm Two labelling stations (front and back labelling) Includes several tooling sets for different bottle types Hedpfxjyv Addj Aa Eefi

Condition: ready for operation (used), No. of sleeve heads: 1 Linear design Type of sleeving: Full product sleeve / partial / bottom sleeve Capacity: up to 12,000 pcs/hour Hedpfxjy A Tlfo Aa Esfi

Condition: ready for operation (used), Year of construction: 2010, operating hours: 1,628 h, functionality: fully functional, machine/vehicle number: W09WOM125ADW76457, operating pressure: 2,800 bar, total length: 440 mm, total height: 205 mm, total width: 194 mm, empty load weight: 2,260 kg, fuel: diesel, overall weight: 2,700 kg, fuel tank capacity: 300 l, rotational speed (max.): 1,800 rpm, rotational speed (min.): 900 rpm, Equipment: chassis, Used water high-pressure unit WOMA Ecomaster MK3 250M (plunger Ø16mm) with DEUTZ TCD 2012 engine. Maximum working pressure: 2800 bar Maximum flow rate: 20 l/min Pump operating hours under pressure: 1077 h Engine operating hours: 1628 h Year of manufacture: 2010 Condition: very good – ready for work Hsdpfxoy Nmm Ns Aa Ejfi Used additional equipment: 2 x 20m UHP hose DN8 (3000 bar), 1 x 5m UHP hose DN5 (3200 bar), 1 x control cable, 1 x control cassette, 2 x UHP high-pressure guns (3000 bar), WOMA technical documentation, 2 x spare wheels Original WOMA superstructure. Regular maintenance carried out. Complete gearbox replacement under WOMA warranty in 2015 (relevant documents available). Trailer registered and paid (valid technical inspection).