Used Bar Equipment for sale (49,314)

Year of construction: 2008, condition: ready for operation (used), The GIF-2000 continuous ice cream freezer (built in 2008) from Gram Equipment is a high-performance freezer that can operate with a capacity of up to 2000l/h. The freezer is mainly used for ice cream or sorbet ice cream, but can also be used for cooling or freezing other liquid products such as yogurt, sauce, etc. The system was in use until September 2023 and was then professionally dismantled for rapid recommissioning. Detailed documentation is available and is included in the offer. Djdpfx Acepyhdtj Nskh

Condition: new, functionality: fully functional, Year of construction: 2025, operating hours: 100 h, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: Bosch Rexroth, controller model: Han´s 901, laser type: fiber laser, laser source manufacturer: Han´s Laser, laser hours: 20 h, laser power: 12,000 W, laser wavelength: 1,050 nm, sheet thickness (max.): 35 mm, sheet thickness steel (max.): 35 mm, sheet thickness stainless steel (max.): 30 mm, sheet thickness aluminum (max.): 30 mm, sheet thickness brass (max.): 20 mm, sheet thickness copper (max.): 20 mm, table length: 3,000 mm, table height: 700 mm, working length: 3,000 mm, working width: 1,500 mm, travel distance X-axis: 3,100 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 100 mm, feed rate X-axis: 280 m/min, feed rate Y-axis: 280 m/min, cutting speed: 10,000 mm/min, repeat accuracy: 0.05 mm, workpiece weight (max.): 2,150 kg, power: 12 kW (16.32 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, compressed air connection: 14 bar, overall weight: 10,000 kg, total length: 10,000 mm, total width: 2,550 mm, total height: 2,200 mm, warranty duration: 12 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, Trade Show Machine, New Machine at an Unbeatable Price!!! The machine offered here is a new trade show model from year 2025, which was exhibited at the EMO show in Hanover in September 2025 and is now looking for a new owner. The machine is new! Demonstration unit! The original list price for this machine is €295,000. Our unique offer for this machine: €199,000!!! including delivery within Germany, installation, and training. No hidden additional costs. The machine can be inspected from October 2025 and tested from December 2025. Cutting samples and cutting videos are available. From here, you will find the machine description. G3015 HF Expert 12kW Fiber Laser Cutting Machine 1.5 x 3m with hydraulic shuttle table and extraction system, including delivery, installation, CAD CAM software, and training. Our high-end fiber laser cutting system features premium components and a distinctive design Cutting area X-axis [mm]: 3100 Y-axis [mm]: 1600 Z-axis [mm]: 150 Maximum speed [m/min]: 280 Acceleration: 3 g Precision [mm]: 0.03 Repeatability [mm/m]: 0.02 Dimensions Length [mm]: 10,000 Width [mm]: 2,550 Height [mm]: 2,200 Maximum sheet weight [kg/table]: 2,150 Available laser power: 6 kW, 12 kW, 20 kW, 30 kW Cutting capacity (quality cut/separation cut) Steel: 30mm/40mm Stainless steel: 25mm/30mm Aluminum: 25mm/30mm Brass: 14mm/16mm Suitable for processing the following materials: Steel, stainless steel, aluminum, copper, brass, titanium, and nickel alloys Fully enclosed for laser safety Compact design saves shipping costs and reduces installation time Hollow structure design suitable for up to 60 kW Improved access via a full-length side sliding door Ergonomic loading and unloading for small workpieces High load capacity for thick materials thanks to hydraulic shuttle table High dynamics and productivity due to powerful controls and motors Integrated control cabinet and laser source with maintenance-friendly access Various automation solutions available Fast service response thanks to remote service support Fully enclosed machine with OD5+ laser safety glass windows CE compliant The control cabinet, laser source, pneumatic system, lubrication system, and the table drive motors are fully integrated into the main frame. Simple visual inspection via the side sliding door Convenient loading and unloading through the side sliding door Dodpfxjxlt Hfo Ac Nokh Easy cutting of a wide variety of small parts Faster response times for demo cuts Higher dynamics & productivity Thanks to the optimized machine frame and extruded aluminum gantry, equipped with the fast real-time controller 'Han’s 901 (Rexroth)' and powerful Rexroth motors, the HF Expert achieves exceptionally high speeds and acceleration. Configuration and component selection Control system: Han’s 901 (Rexroth, Germany) Servo drives: Rexroth, Germany Cutting head: Han’s Laser Linear guide: Hiwin, Taiwan (China) Rack: Güdel, Switzerland Gearbox: Güdel, Switzerland Servo valve: Lanny, Germany Machine frame: Han’s, China Gantry: Han’s, China Z-axis: Han’s, China Shuttle table: Han’s, China

Condition: used, Metal strip unwinding - wrapping machine for the production of fencing strips. Specification: Model: Clark's press equipment Maximum sheet thickness: 0.5 mm Other: speed is not adjustable Made in: England Dksdjqla Uuepfx Ac Njh Available in two units. If you have any further questions, we will be happy to answer them.

Condition: excellent (used), Year of construction: 2001, I sell the bar conveyor suitable for Industry use, for example wooden industry, material manipulation etc. Brand: CEFLA Dkedpfx Aot Rr Hbjc Nsh Model: TR3000/133/RE/RU Total length 2,60m Band width 1450mm Feeding with electric motor 0,26kW / 0,35HP Fully working. Available immediately.

Condition: excellent (used), Year of construction: 2010, I sell the Finnrose bar conveyor suitable for Industry use, for example wooden industry, material manipulation etc. Total length 4,20m Band width 1650mm Feeding with electric motor 0,37kW / 0,55HP Fully working. Available immediately. Djdpfxet Rr Hus Ac Nekh

Condition: good (used), Tote Bin Lifter Tipper for 200ltr tote bins Dkjdpfxjihi Ics Ac Neh Electro- hydraulic operation Tipping height 1200mm Mobile on castors Height adjustable feet to 200mm additional height In excellent working condition Video available of unit is use

Year of construction: 2008, condition: new, Type: XZF / QA90L4A Serial number: Power: 0.33 MPa / 1.5 kW Speed: / 1.390 rpm Diameter top: Dksdpsizz D Tefx Ac Njh Weight: 210 kg Dimensions: mm Condition: unused

Condition: used, Speed-Tech Equipment horizontal cardboard baler, bales are approx. 1200 lbs., 6' long x 36" wide x approx. 28" tall, 3 phase, in working condition, winning bidder responsible for proper removal. Dedpfx Ajxd D Nzsc Nskh

Year of construction: 2008, condition: ready for operation (used), Highly efficient production line for the production of molded stick ice cream, popsicles and similar products. Capacity of up to 42,000 pieces per hour (can also be used at a reduced hourly capacity). The currently installed mold size is 35ml moldet stick ice cream. Manufacturing date of the line is 2008. Complete line is for sale, including rotary molding system, automatic stick inserter, wrapper, control panels and other components. Full documentation is available. The line was in use until September 2023 and was then professionally dismantled for rapid recommissioning. Approximate space required for installation: 9 x 4.5 m. Dodpfjpyha Esx Ac Nekh

Year of construction: 1995, condition: ready for operation (used), A used compressed air refrigeration dryer. The refrigeration dryer was checked for function by refrigeration engineer before decommissioning. He then extracted and disposed of the 18 kg of R22 refrigerant ( 2 bottles). All protocols available. Afterwards a small amount of nitrogen was filled in. Gladly we can let them fill the dryer with new refrigerant ( for example R407C ). !! Selling price is without refrigerant !!! Manufacturer: Sabroe Model: SV 1010 AB Type: 50 A max. volume flow: 55m³/min (3340 m³/h) pressure drop at max. volume flow: 0,38 bar Weight of refrigerant: 18 kg ( actual without refrigerant) Max. pressure refrigerant side: 16/ 25 bar Dksdpfx Aefy Trhsc Noh Air connection: DN 100 Condensate drain: Beko 2x 3/4 inch max. pressure compressed air side: 16 bar max. volume flow max. temperature: compressed air: 60°C power consumption with fans: 7,1 kW voltage: 400Volt size width/ depth/ height: 1880mm / 1100mm / 2000mm weight: 835 kg

Condition: as good as new (ex-display), Year of construction: 2023, Manual cleaning is carried out using special gloves in the front section. The effectiveness of the cleaning is ensured by a 0-8 BAR wash pump and a special spray nozzle. A temperature of up to 60 °C can be set for the cleaning fluid in these devices. The pressure is adjustable from 0-8 bar. Technical data: Work surface: 950 x 700 mm Internal height: 450 mm Load capacity: 70 kg Spray pressure: 0-8 bar adjustable Tank volume: 75 liters / heating capacity 2kW Basic version: - Blow-off gun in the interior Djdjr Hm R Tspfx Ac Njkh - Frame, feet, cover and housing made of stainless steel - Removable stainless steel panels above the tank - Flap can be opened upwards with 2 handles and gloves - Tempered glass window - Door opening/closing system supported by gas struts - Door opening monitored by safety limit switch - Filter on the suction side of the pump (500 micron) - Foot switch for operating the cleaning pump - Interior lighting - Neoprene gloves L 600mm (chemical resistant)- Adjustable feet +/- 50 mm - Stainless steel cartridge filter with pump (10/25/50 micron) - External mini-pneumatic oil separator

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, Cheese vat / Pasteurizer / Process tank 100 liters. Used - 3.5 years old The Vat: - Completely stainless steel - Double jacket (bain-marie) + insulation - Must be operated without pressure Djdpfx Acswg Ellj Nskh - 100 liters - Butterfly valve, NW 50 - Agitator mounted on the lid and easily removed using a quick-change adapter. - Agitator rotates slowly; approximately 24 RPM - 400 volt / 8.4 kW heating (16 amp plug). Heating power can be halved with a switch (8.4 - 4.2 kW). Control: - Digital milk temperature display - PID controller / thermostat - Control system with one automatic program (heating - holding - cooling) and manual operation (manual heating and manual cooling with cold water) - Heats up to 90°C - Cooling with cold water. Water inlet with motor-controlled ball valve.

Condition: good (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 11383, type of input current: three-phase, working range: 3,000 mm, overall weight: 17,000 kg, input voltage: 400 V, cutting speed: 2,000 mm/min, total width: 4,500 mm, total height: 5,500 mm, total length: 22,400 mm, track width: 1,400 mm, repeat accuracy: 1 mm, workpiece weight (max.): 30,000 kg, warranty duration: 6 months, input frequency: 50 Hz, open-circuit voltage: 400 V, ambient temperature (max.): 45 °C, Secondhand SPC3000 - HGG Profiling Equipment B.V. Are you ready to automate your workflow, but not ready for a heavy investment in pipe cutting machinery? We have an interesting opportunity for you. This 2014 SPC3000 (40 Ton) pipe cutting machine is highly versatile. The machine is capable of cutting pipes from 300mm - 3000mm diameter and is equipped with a lot of extra features: - 4x 10 Ton pipe trolleys (300-2500 mm OD) (1 of them is a driven pipe trolley) - 2x 20 Ton pipe support (2500-3000 mm OD) Dedpfxeri Slms Ac Njkh - Plasma marking system Kjellberg Finemarker - Punch marking system - Can handle 18 meter long pipes - Plasma cutting system Kjellberg FF450 - Oxyfuel cutting process - Additional touch screen remote control attached to main drive - 3 Point fume exhaust system The SPC3000 is used by our eXperience Center and maintained by our best engineers at our headquarters in The Netherlands. The machine has a proven record and is used to profile pipes for clients in several high demanding industries f.i offshore, piping, structural steel and the vessel industry. A lot of special projects have been profiled on this machine.

Condition: excellent (used), - Cooking chamber dimensions: 1200x2000 mm Dodpfx Aewxmn Ssc Njkh - Refurbished equipment: The equipment is prepared upon order, collection and return deadlines are agreed at that time (please ask for the price after refurbishment).

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: RoboRail, type of input current: three-phase, working range: 12,500 mm, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 20 mm, overall weight: 6,500 kg, input voltage: 400 V, total width: 3,200 mm, total height: 2,600 mm, total length: 20,000 mm, workpiece weight (max.): 550 kg, table length: 12,500 mm, cutting current: 125 A, working length: 12,500 mm, height adjustment type: mechanical, input frequency: 50 Hz, ambient temperature (max.): 45 °C, RoboRail: All-in-one Robot Plasma Cutting Machine We regularly hear from manufacturers that automation is not for them because everything they do is different, but that is precisely what makes automation so important! With the RoboRail, each individual part can be different and the plasma cutting machine will cut and deliver the parts 1-for-1, directly from the CAD files. Does your project require complex cuts? Send it to the RoboRail. Does your project require a wide variety of delivered profiles? Send it to the RoboRail! This machine will become the workhorse of your factory, giving you time to focus on what your company does best! Easy design input: Import files from SDS2, Tekla, or a Solid model. Djdpfx Aceq Nz Sks Nokh Or simply draw your design on the machine work surface. Optimal material usage: No more waste with HGG-optimized nesting. The more files you upload, the smarter the nesting process becomes. Seamless processing: Upload your file and RoboRail takes over. Automatic loading of material and accurate determination of starting point. No need for operator intervention during the cutting process. Perfect results, every time: Get flawless cut steel, exactly matching your CAD design. Experience uninterrupted production with seamless repetition. RoboRail ensures readiness for the next production step. This machine is available in several configurations, including variants with different maximum material feed lengths. Based on your selected configuration, we can provide you with an appropriate price proposal. Please refer to our brochure for a complete listing of available options. If you have further questions, please do not hesitate to contact us!

Condition: good (used), Key bar chuck, power chuck, three-jaw chuck, three-jaw lathe chuck -Manufacturer: Forkardt, wedge bar chuck type F 400 -Chuck size: Ø 400 mm Dodpoxdkmyofx Ac Nekh -Bolt circle: Ø 235 mm -Adapter: Short taper 11 / cone 192 - 196 mm -Through hole: 111 mm -Dimensions: Ø 400 x 325 mm -Total weight: 138 kg

Condition: used, Lasko hammer KGK 063 Impact force 630 mkp Stroke max. 630 mm Bear weight 630kp Top pressure - filling pressure 5 bar Dkjdpfx Aju Eb Niec Neh

Condition: excellent (used), functionality: fully functional, mileage: 168,913 km, power: 162 kW (220.26 HP), first registration: 02/2005, overall weight: 10,000 kg, axle configuration: 4x4, empty load weight: 6,175 kg, next inspection (TÜV): 09/2026, driver cabin: day cab, gearing type: mechanical, emission class: euro3, suspension: steel, Year of construction: 2005, Equipment: ABS, cruise control, differential lock, MAN LE 10.220/Winter Service/Swap Body System/Spreader/Plow/4x4/Municipal • Manufacturer: MAN • Model: LE 10.220 • Mileage: 168,913 km • First Registration: 02/2005 • Power: 162 kW / 220 HP • Drive Configuration: 4x4 • Swap body system Dedpfoydk Dmox Ac Nekh • Three-way tipper: L 2.90 m x W 2.10 m x H 0.40 m • Transmission: Manual, 6-speed • Suspension: Leaf spring (front/rear) • Snow plow, Schmidt Group: CP3 • Spreader unit, Epoke: SH3201 • ABS • Speed limiter • Cross-axle differential lock • Rear axle differential lock • Transfer case (low-range gearing) • Selectable front-wheel drive • Heated windscreen • Winter service headlights • Tipping operation • Reversing camera • Unladen weight: 6,175 kg • Payload: 3,825 kg • Gross vehicle weight: 10,000 kg • Emission standard: Euro 3 • TÜV valid until September 2026 • German vehicle • German documentation • Immediately operational • This offer is non-binding and subject to change. - Subject to prior sale, - Errors and/or typographical mistakes excepted. - Sale according to our Terms and Conditions.

Condition: good (used), Approx. 30 order picking trolleys, Wanzl KT3 – used – : Dksdpeyhxk Tsfx Ac Neh Price per unit: only €150 (net, ex works)! Preferably for sale as a complete lot! Manufacturer: Wanzl Model: KT3 Year of manufacture: unknown Type 1 – approx. 25 units Depth / width: approx. 46cm Length (without push handles): 1.70m Length with push handles: approx. 1.90m Height: approx. 1.64m Height incl. rear panel: approx. 1.75m Base plus 2 additional shelves Type 2 – approx. 5 units Length (without step): approx. 1.68m Length incl. step and push handles: approx. 1.80m Width: approx. 62cm Height: approx. 1.83m No additional shelves With foldable step/footboard Condition: good Available: immediately Location: Waltrop

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, turning length: 210 mm, turning diameter: 26 mm, overall weight: 3,300 kg, rotational speed (max.): 8,000 rpm, total width: 1,300 mm, total length: 2,260 mm, total height: 1,800 mm, Equipment: documentation/manual, Make: Hanwha TechM, Model: XD26H, Year: 09/2011, Fanuc Control, XD Series, 1 high-pressure cooling system with FMB bar feeder Type Turbo 3-26 / 3200 "C", Year 2012 Turning diameter: 26 mm Max. turning length: 210 mm Control: Fanuc Main spindle: Speed: max. 8,000 rpm Sub spindle: Speed: max. 8,000 rpm Max. part length: approx. 350 mm Tool capacity Number of tools: Up to 20 tools Speed of driven tools: 6,000 rpm Dkjdpfeyhp Ixsx Ac Nsh Dimensions and weight Machine weight: approx. 3,300 kg (without bar feeder) Dimensions (L x W x H): approx. 2,260 x 1,300 x 1,800 mm

Condition: good (used), Year of construction: 2007, functionality: fully functional, turning length: 205 mm, spindle speed (max.): 6,000 rpm, turning diameter: 16 mm, overall weight: 1,650 kg, Equipment: documentation/manual, CNC Swiss-type automatic lathe with main and sub-spindle and FMB bar feeder. Manufacturer: Star Micronics, model SB-16, type C 480; year of manufacture: 2007; control: Fanuc Series 18i-TB. Max. bar diameter: 16 mm, max. turning length: 205 mm, max. spindle speed: 6,000 rpm, number of axes: 5. Bar length: 3,200 mm, weight: 1,650 kg. Main spindle, sub-spindle, tool positions for side machining, tool positions for back and face machining, live tool stations, parts conveyor for small components. Bar loader: FMB Minimag 18/3200/A; coolant/lubrication system: oil. Dodpfjyhpvisx Ac Nekh

Condition: used, Year of construction: 1996, Bar loader FMB type Turbo ET 425 / 3000 stood on an Emco lathe Dkjdpfx Ajugv Uaoc Njh

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 800x800x1350 mm weight 35 kg total power requirement 0 kW Dsdpfev A Hdvsx Ac Nokh

Condition: good (used), Year of construction: 2002, functionality: fully functional, CNC control Max. bar diameter: 26 mm Max. spindle speed: 50 - 7,000 rpm Dkjdpfxsyhd Aqs Ac Njh 3 cross slides Turret with 6 stations Bar feeder IEMCA BOSS 432/32 N Max. bar length: 3,200 mm

Condition: good (used), Year of construction: 2004, It has a lifting and lateral moving function and four side clamping jaws, with a rotary table Manufacturer : AGROMAT Kft - Machine type: BEF-15 - Weight capacity: 1500 kg - Overall size: 4000 x 1800 x 3700 mm - accomadate sizes: 1200 x 800 x 700 mm - range of movement of clamping jaws: 150 mm Dedoir Uh Djpfx Ac Nokh - lifting height: 700 mm