Refrigeration dryer Compressed air dryer

Sabroe GmbH 55m³/min 16 bar SV 1010 AB

Condition: used, Vertical multistage high pressure centrifugal pump GRUNDFOS. Pump as good as new, but a part of the magnetic coupling has been dismantled. Type CRN 10-09 MP-FGJ GI-V Year of manufacture approx. 2012 Delivery capacity at 7,2 bar: max. 10 m3/h Delivery head: max. 91.8 meters Mains connection: 400 Volt, 50 Hz Power: 3 kW - pump construction in 9 stages - made of stainless steel 1.4401 - the pump is as good as new, but there are several new pump chambers included Cgsdpfofupadsx Akbsu - part of the magnetic coupling is missing suitable for drinking water supply, irrigation and drainage Packed in the original wooden box space requirement pump LxWxH 1100 x 250 x 300 mm Space requirement shipping box LxWxH 1400 x 330 x 340 mm Weight with shipping box 85 kg As good as new No submersible pump or submersible pump

Year of construction: 1998, condition: ready for operation (used), functionality: fully functional, Vanicek drying chamber with post rack trolley with in- and out-swing gates with control system and electrical control cabinet Dimensions: internal length 13.05 m, width 4.00 m, height 2.80 m Fan VMR 71-05-4, E-motor 1.1 kW/400V Dehumidification Ø 50, with actuator Dehumidification Ø 40, with actuator UGL sensors, humidification, heating valve (to be provided by client) Cjdjwxdqkepfx Akbjgu Switchgear, heating coil, fan frame Stacking dimensions 1x12.5 m, 2x1.2 m, 2x1.0 m

Year of construction: 1978, condition: good (used), Weinig U 17N 7-head four side planer Cjdpfxsg Sa R Dj Akbogu Planing width mm 170 Planing height mm 120 Number of spindles 7 Spindle arrangement down/left/right/up/down/universal Electric height adjustment Feed rate from 6.5 to 45 m/min Drive of feed rollers cardan 11 Top pulling rollers

Year of construction: 2011, condition: ready for operation (used), The ultrafiltration plant is used for purification of various liquids. liquids. The membrane elements are a 37/3.8 channel design, 0.1ìm fineness and a length of 1300 mm. In each of the two modules are installed 32 ceramic rods with a total capacity of 2,000 L / h each. 1 piece construction frame,1 piece feed pump,1 piece rod heater, 2 pieces bleed pump, 1 piece cleaning tank, 1 piece membrane valve, 1 pcs compressed air diaphragm pump, 1 pcs UF ceramic module, 1 pcs tem. over. 1 piece control valve, 4 pieces pressure measurement with display, 1 piece control unit according to VDE 0110/0113 CE, 1 piece flow measurement, 1 piece pre-assembly of the plant in the factory of the contractor, Csdef Dc D Hepfx Akbjgu

Condition: good (used), Heavy duty high pressure washer. Two motors - 90kW + 1,5kW Machine was used for few hours and then stored at the warehouse. Delivery is available. Cgjdpjh Rkilefx Akbeu

Condition: as good as new (ex-display), Year of construction: 2024, machine/vehicle number: MA0139_1335, Exhibit immediately available: New Kaeser Aircenter SK 22 - 8 bar screw compressor with integrated refrigeration dryer and 315 liters compressed air tank Control Sigma Control 2 Year: 2024 Operating hours: 1 hr Csdpfx Akshwwyrsbegu Pressure: 8 bars Rated power: 11KW Delivery quantity: 2.00 m³/min Sound level: 66 dB(A) Compressed air outlet: 1" Compressed air tank: 350 liters volume Pressure dew point refrigeration dryer: + 3°C Electrically level-controlled condensate drain: ECO DRAIN Dimensions length x width x height: 750 x 1335 x 1880 mm Weight: 579 kg Visit our store. We always have a wide range of new and used compressors in stock!

Condition: good (used), Year of construction: 2014, functionality: fully functional, volume flow: 1,000 m³/h, total width: 1,020 mm, total length: 1,680 mm, total height: 2,460 mm, overall weight: 1,540 kg, operating pressure: 10 bar, input voltage: 400 V, power: 14.2 kW (19.31 HP), 1 heat-regenerating compressed air adsorption dryer. The dryer was in use from 2014 to 2017. The system has been out of operation since 2017. The compressed air came from an oil-free Atlas Copco ZR3 compressor with 132 kW. Manufacturer: Donaldson Filtration Deutschland GmbH Type: HRS 1000 Year of construction: 2014 Volume flow at 7 bar: 1000 m³/h (16.66 m³/min) Connection: DN 80 Installed power: 14.2 kW Dimensions length / width / height: 1680mm / 1020mm / 2460mm Weight: 1540 kg Desiccant bottom (20 cm): 3 mm activated aluminum oxide Desiccant middle (40 cm): 2 mm activated aluminum oxide Top desiccant (rest up to the top) silica gel as a ball. The desiccant is already disassembled and immediately available. The desiccant was sucked out of the container with a vacuum cleaner and packed separately in airtight bags. Cgedjr A El Espfx Akbju The desiccant is still in a usable condition. It is not oily or soiled. There is the possibility of external re-drying. The TÜV has inspected the inside of the containers and an expert opinion is currently being prepared. "Loose adhesion on the lower part of the dished end" (pictures to follow)

Condition: good (used), Four-sided planer WEINIG Cjdpfx Asupkc Ejkbsgu type U17N 8 spindles Working width up to 170 mm Working height up to 120 mm feed infinitely variable 6-36 m/min

Condition: excellent (used), Year of construction: 2007, Build in 2007 Pressure max 16 bar Cedpfxjg Dctye Akbegu Desiccant dryer, heatless regenerated

Year of construction: 2007, condition: good (used), machine/vehicle number: 53, Proving chamber for 8 carts, made Pietroberto, type PB-CF10T, year of manufacture 2007, series 53, made in Italy. Fermentation chamber volume 12.02 sq. meter ▪ Power: 4kW ▪ Double heating element: 1.8 X 2 kW; ▪ Maximum temperature: 45°C ▪ Siemens fan motor 0,25 kW ▪ Maximum humidity: 90% ▪ With viewing windows at each door. ▪ The room has 4 doors on both sides ▪ With electromechanical switches ▪ With digital control Cgedpsm Uywaefx Akbsu ▪ With a protective barrier, with internal stainless steel walls inside and outside ▪Air conditioning unit and stainless steel fans ▪ Constant regulation of air temperature and humidity ▪ External dimensions: (LxWxH): 2,500 mm x 2,000 mm x 2,300 mm ▪ Internal dimensions (LxWxH): 3,250 mm x 1,850 mm x 2,000 mm ▪ Full aluminium camera structure and frame, just the structure! ▪ It requires an independent water source with a filter on the input phase. The proving chamber is correctly disassembled and correctly stacked, it also has an assembly sketch drawn up at the time of disassembly. Price Euro 2.400 + VAT, FCA Oradea/Romania NOTE: Please take note that this advertisement does not represent a binding offer from us to any interested parties, nor does it contain a request for you to make a binding offer to us. The advertisement is only as a starting point for future contract discussions between us. Please get in touch with us if you're interested in the machine, without obligation using the contact information provided by us or the "Write message" feature, in each instance providing your phone number and email address. After that, we will be pleased to email you our terms and conditions of the sale along with an offer. Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana