Used Band Saw Vertical for sale (15,797)

Condition: new, roll diameter 520 mm throat 520 mm workpiece height 310 mm cutting speed 25 - 500 m/min table surface area 600 x 500 mm band length 3.880 x 3-16 mm mm Table tiltable up to 15° Grad work height max. 1000 mm total power requirement 1,5 kW weight of the machine ca. 500 kg. dimensions of the machine ca. 1,3 x 0,76 x 2,14 m Furnishing: - Solid gray cast iron table - Safe working is guaranteed by the large contact surface - Standard with band welding device, annealing device - Scissors and sharpening stone Itjdpfx Asxaazxjfijn - As standard with continuously adjustable cutting speed - Machine body made of robust steel construction for smooth running - Precision blade guide for optimal cutting results - Ideal for sawing complicated contours and shapes - Work table can be swiveled by 15 ° in all 4 directions - Blow-out device with compressor included in delivery - For radius sawing saw bands from 3 mm wide available scope of delivery: - saw band - Tape welding device with annealing device - halogen light - Scissors - grindstone - Chip brush - blow-out device - LED digital display - Longitudinal table groove

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, roll diameter 400 mm throat 420 mm workpiece height ca. 220 mm table-size 600 x 600 mm cutting speed 12 - 375 m/min saw band length 3160 - 3260 mm saw band width min./max. 3 - 12 mm total power requirement 3,6 kW weight of the machine ca. 0,55 t dimensions of the machine ca. 0,6 x 1,0 m Overhaul year of construction 2023 Isdpfx Afew U Ehuoiotn 400 V, 50 Hz, with CEE plug and cable Color: white/grey Accessories: * New castors * Emergency stop * Both doors electrically locked * Swivel table * Circuit diagram has been redrawn * Electrical acceptance certificate is enclosed On request, an LED light and a belt welding device can be installed for an additional charge Operating instructions, circuit diagram immediately available under chip ready for demonstration ! Accessories: * Machine overhauled in 2023 * New castors * Emergency stop * both doors electrically locked * Swivel table * Circuit diagram has been redrawn * Electrical acceptance certificate is enclosed An LED light can be installed on request for an additional charge Operating instructions, circuit diagram immediately available under chip ready for demonstration ! Operating instructions, circuit diagram immediately available under chip ready for demonstration !

Condition: used, machine/vehicle number: 40220, throat: 750/430 mm roller-Ø: 350 mm passage height: ca. 230 mm Iedpfxoclmy He Afietn table size: 520 x 520 + 480 x 250 mm band speed: 50 - 300 feed/min engine: 380 V, ca. 1,5 kW space needed: 1730 x 880 x 1800 mm weight: ca. 500 kg

Condition: used, Technical details: dimensions of saw-band: 3400 mm saw band length: min. 3200 mm saw band width: 20 mm band speed: 6 / 12 / 25 / 75 / 150 m/min cutting speed: 15 - 1500 / steples m/min Table dimensions: 665 x 665 mm table height over floor: 1050 mm table swivelling to both sides: 15° / 30° Grad table feed: Länge: 250 mm total power requirement: 4,0 kW dimension machine xH: 1,2 x 0,9 x 2,2 m Steel and metal band saw Isdov T Th Nepfx Afijtn with saw band cutting, welding and grinding device Saw band speed 2 steps, infinitely variable Infinitely variable table feed Tiltable table Machine lighting Stop bar *

Condition: excellent (used), Year of construction: 2011, Vertical Wood Band Saw PROMAC SW-430 Throat depth: 400 mm Table size: Depth 600 mm x Width 430 mm Tilting table from 0 to 40° Blades dimensions: Length 3330 x 15 mm x thickness 0,6 mm Maxi cutting height: 200 mm Steering wheels diameter: Ø 430 mm Voltage: 380 V Motor: 1,5 kW Ijdpfxow T Tpqe Afietn Width: 800 mm Depth: 900 mm Height: 1900 mm Weight: approx 150 KG Year of construction: 2011 (machine in very good condition) Supplied with 2 spare blades

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Version : with large sliding table and cutting line laser, Sold with / without suction unit. This would be suitable for sawing graphite . Special superstructures : Sliding table is designed for workpieces weighing up to 150 kg and with dimensions dimensions of W x D x H of 1500 x 600 x 450 mm High-quality, powerful extraction system from RUMAC, type DS 64000 M, 2.2 kW, protection class IP65 ; . Technical data of the saw : Saw band 4550 x 20 x 0,8 mm ( actual : WIKUS , type TCT ) Itodpfxsw Nvwvj Afion Roller guide 8 - 25 mm Cutting height max. 400 mm under the guide throat 630 mm Cutting speed approx. 250 - 2000 m/min , infinitely variable Drive power saw motor 4.0 kW Space requirement, W x D x H approx. 2 x 1.2 x 2.4 m plus extraction system Weight approx. 1.25 tons plus extraction system .

Condition: used, roll diameter 420 mm throat 400 mm workpiece height 285 mm cutting speed 15 - 1400 m/min table surface area 500 x 500 mm saw band length 3200-3400x6-20x0,9 mm work height max. 955 mm voltage 380 V total power requirement 1.5 kW weight of the machine ca. 470 kg dimensions of the machine ca. 950 x 750 x 1820 mm Itsdpfx Asw U U Rxsfien Furnishing: - robust, vertical - band saw machine - Frequency-controlled, infinitely variable belt drive - Belt guide height adjustment with hand wheel - IDEAL strip welding machine model BSO, with shears and grinding motor - swiveling table 15°/45° - Machine base

Condition: good (used), Table size: 610 x 610 mm Finish: 780mm Iedpfx Afsixtu Njietn Adjustable table!

Year of construction: 1984, condition: used, machine/vehicle number: 25 948, throat: 485 bzw. 1050 mm roller-Ø: 500 mm passage height: 380 mm table size: Arbeitstisch 780 x 800 mm sawing band length: ueber 2 Laufraeder 3920 - 4050 mm sawing band width max.: 20 mm band speed: 15 - 940 m/min engine: 380 V, 4 kW Iodpfx Afeb N Eh Hoietn space needed: 950 x 2130 x 2100 mm weight: 1740 kg

Condition: used, Year of construction: 1990, 15282 90 band length 4600 - max. 4750 mm Fabr. Ideal weight ca. 890 kg dimensions of the machine ca. 130 x 850 x 2300 mm +++++ Please note: Iodpfx Afeic Hqhjietn The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: used, Year of construction: 1971, roll diameter 300 mm throat 450 mm table height 480 mm saw band length 3350 mm width of saw-band 10 mm total power requirement 2,2 kW weight of the machine ca. 520 Kg dimensions of the machine ca. 1,00 x 0,70 x 1,85 m Saw for body parts made of sheet metal, plastic etc Itodpjwhqtdefx Afisn good accessibility of the saw blade, guided freehand. Cutting speed infinitely variable up to 1000 m/min Tape welding device IDEAL BS00

Condition: good (used), Year of construction: 1980, functionality: fully functional, Technical data: Large support table 800 x 820 mm, Table travel approx. 350 mm, Itsdew Nirmspfx Afien Cutting height under guide approx. 400 mm Speed continuously variable approx. 15 – 944 m/min. .

Condition: used, Year of construction: 1976, Description to follow! Ijdpfxswqrw As Afietn

Condition: like new (used), Year of construction: 2009, I sell the vertical band saw Felder Hammer N4400. Motor power 3,0KW Suitable for saw bands up to 35mm. Table tilting. Itedjr Alykopfx Afijn Year 2009 Condition very good. Available immediately.

Condition: used, roll diameter / mm throat / mm workpiece height / mm With saw blade welder Mod: BSO Tape width: 16mm Volts: 360 Hz: 50-60 Amp: 5.2 . 91622F Saw blade length max.: 4250mm Saw blade length min.: 4150mm Itodpjikggdefx Afion Table dimension: 600x600mm Max working length: 1120mm

Condition: used, Year of construction: 1999, working range 30-180 Grad band length 3640 max mm band length min 3458 mm 14747 89 Itjdpfxowypm Te Afien weight of the machine ca. 400 kg

Condition: ready for operation (used), Year of construction: 1972, functionality: fully functional, Steel and metal bandsaw machine / Brand: MÖSSNER REKORD / Type: SSF 801 / Year of construction: 1972 TECHNICAL DATA: - Roller diameter: 800 mm - Outreach: 785 mm - Maximum clearance height: 720 mm - Working table: can be swiveled on two sides Swivel range: right: approx. 45°, left approx. 10° - Band saw length: min. 5.650 mm, max. 5.800 mm - Saw band width: 10/20 mm - Cutting speed range, stepless: 15 - 940 m/min in 3 cutting speed ranges: I: 15 - 79 m/min II: 67 - 305 m/min III: 207 - 940 m/min IV Rapid speed: 4.000 m/min - Drive: 11kW - Power supply unit: 500 V, 50 Hz - Machine weight: approx. 2,3 tons - Space requirement (width x height x depth): approx. 1,6 x 2,9 x 1,9 m Additions / accessories: - Hot-knife cutting: For hot-knife cutting of steel sheets of any strength and hardness up to a cutting height of approx. 25 - 30 mm, the machine has a direct high gear with a cutting speed of 3.000 or optionally 4.000 m/min. - Band filing device - Belt grinding device - Circular cutting device: The circular cutting device is attached to the guide arm directly above the clamping plate. With its help, circular saw cuts from 40 - 290 mm radius can be made. - Choice of saw bands Minimum radii that can be cut: Radius: Band width: 6 mm 3 mm 10 mm 4 mm 17 mm 6 mm 30 mm 8 mm 45 mm 10 mm 140 mm 16 mm The number of teeth on the saw band depends on the types and thicknesses of the materials to be cut. Steel: 5 - 20 mm material thickness 14 Z" over 20 mm " 8 - 10 Z" Itodpfx Aevx Hugefisn under 5 mm " 18 - 22 Z" Gray cast iron: 5 - 20 mm " 10 - 14 Z" over 20 mm " 6 - 8 Z" Brass, copper, zinc: over 5 mm " 8 - 10 Z" under 5 mm " 10 - 14 Z" Aluminum and plastics: over 5 mm " 7 - 10 Z" Soft solder: 8 - 14 Z" - Saw guides The machine has two different saw guides: * 1 x precision saw band jaw guide with replaceable, carbide-tipped, ground and lapped guide inserts for 4, 6, 8 and 10 mm saw band width. * 1 set of guide rings for 20 mm wide saw blades for working with metals and plastics at higher cutting speeds and for hot cutting. There is no guarantee for correctness and completeness of the technical details and accessoires. - Subject to prior sale -

Condition: new, total height: 4,700 mm, cutting width (max.): 1,100 mm, overall weight: 19,000 kg, power: 90 kW (122.37 HP), saw blade length: 10,450 mm, The VTZ PLUS is MEBOR’s exceptionally FAST vertical band sawmill system, designed for high capacity as well as quality-oriented sawing. Its SMART design combines speed, energy efficiency and high recovery of wood. Itodpfxorlm N Uo Afijn

Condition: used, Year of construction: 1977, roll diameter 420 mm throat 410 mm workpiece height ca. 210 mm table-size 600 x 600 mm table - tiltable 45 ° total power requirement 1,7 kW weight of the machine ca. 0,6 t - machine out of teaching shop - - with sawband welding and grinding device - Isdpfxowlvkis Afistn

Condition: excellent (used), Year of construction: 1998, Cutting width 508 mm Cutting height 305 mm Table size 600 x 560 mm Working height 1000 mm Roll diameter 515 mm Cutting speed 20 - 1000 m/min Saw blade width 3 - 25 mm Saw blade length 3975 mm Saw blade thickness 0.65 - 0.9 mm Isdpfxjvkx H Ee Afietn Drive power 1.5 kW Dimensions L x W x H 950 x 770 x 2000 mm Weight 510 kg Accessories / Special features: • Butt band welding device (only suitable for carbon band saw blades up to 0.65 mm wide and not for bi-metal M 42!) • Continuously variable cutting speed • Digital display for the cutting speed • Support table can be swiveled in 2 levels Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: used, roll diameter / mm throat / mm workpiece height / mm Iedpouddmrefx Afistn Table dimensions: 615x615mm

Condition: ready for operation (used), Mössner Rekord SM / 320 Vertical Metal Bandsaw Throat depth: 310 mm Wheel diameter: 320 mm Maximum workpiece height: 200 mm Itodpfx Ajwty Dpsfisn Working height: 950 mm Cutting speed: 12 - 750 m/min. Power supply: 380 Volt, 50 Hz 4 gearbox speeds Space requirement approx. 800 mm x 770 mm x 1700 mm (L x W x H) Weight approx. 560 kg Band welding unit: Ideal Table: 500 mm x 500 mm You are welcome to visit for an inspection. We can arrange cost-effective shipping for you! You will receive a proper invoice. For international customers, a net invoice can be issued, provided a valid VAT ID is supplied. Subject to prior sale. Visit our shop and discover our other offers as well. Named company names and trademarks are the property of their respective owners and are used for identification and description purposes only. Deviations from technical data and errors in the article description are possible and subject to change.

Condition: used, Year of construction: 1972, table-size 670 x 670 mm throat 1030 mm workpiece height max. 300 mm saw band length min. 4700 mm saw band length max. 4800 mm Itsdetqqrkepfx Afijn sawing motor 2,2 kW total power requirement 3,2 kW weight of the machine ca. 1,0 t dimensions of machine L x W x H 2,31 x 1,05 x 2,03 m Accessories: saw band welding and grinding attachment - table swivelling left / right - hydr. feed in table

Year of construction: 1982, condition: used, roll diameter / mm throat / mm workpiece height / mm table-size 600 x 600 mm weight of the machine ca. ca. 650 kg Technical specifications: Iedoi E Ahdspfx Afiotn Roll diameter approx. 420mm Projection in width approx. 415mm Projection in height approx. 265mm Table size approx. 605 x 600 mm Belt speed 18 - 562 m/min. 8 levels Saw band length min./max. 3150 / 3260mm - Saw band speed over 4 gear stages and 2 engine speeds - Saw blade butt welder IDEAL BS 0-16 with scissors and whetstone - swiveling work table in 2 axes Dimensions: approx. L x W x H 950 mm x 750 mm x 1900 mm Weight 600kg with table feed Description has been adopted.

Condition: used, Year of construction: 1971, roll diameter / mm throat / mm workpiece height / mm table-size 800x750 mm Technical specifications: Roll diameter approx. 420mm Projection in width approx. 415mm Projection in height approx. 265mm Table size approx. 605 x 600 mm Belt speed 18 - 562 m/min. 8 levels Saw band length min./max. 3150 / 3260mm - Saw band speed over 4 gear stages and 2 engine speeds Iedpfx Ajwgi R Ssfiotn - Saw blade butt welder IDEAL BS 0-16 with scissors and whetstone - swiveling work table in 2 axes Dimensions: approx. L x W x H 950 mm x 750 mm x 1900 mm Weight 600kg with table feed Description has been adopted.