Used Band Press for sale (16,155)

Condition: used, Year of construction: 2003, This hot vulcanizing press, model: type CBP-400-2000-1500, is being auctioned online in our industrial/machinery auction due to the closure of the ContiTech Transportsysteme site. Gsdpjyz R T Rjfx Acwoir

Condition: good (used), Year of construction: 2017, operating hours: 1,640 h, functionality: fully functional, Baler Presto CC 40 M, Year of manufacture: 2017 Technical Specifications: Manufacturer: Presto Model: CC 40 M Year of manufacture: 2017 Pressing force: 40 t Cycle time: 34 s Drive power: 15 kW Feed opening: 1080 x 1100 mm Feed volume: 0.85 m³ Binding: 4-fold, polyester strapping, manual Throughput rate at bulk density of: 35 kg/m³ - 1.8 t/h 60 kg/m³ - 2.5 t/h 100 kg/m³ - 3.1 t/h Bale size: 750 x 1100 mm Bale weight: 400 kg Dimensions: 3650 x 1590 x 2010 mm (LxWxH) Machine weight: approx. 3,800 kg Materials: Paper, cardboard, film The baler is in good condition. It has been inspected and tested by us. A video can be found on our website or YouTube channel. Operating instructions and CE declaration are available. Note: Channel discharge is fully automatic and regulated. Please note: All technical data is based on the manufacturer's information. We do not accept liability for the information provided or any possible errors. This offer is non-binding, subject to prior sale, and may be revoked at any time. Inspections are possible by appointment. Gedeyz R Hqepfx Acwsir Sale is ex-works, prepayment required, without warranty or guarantee.

Condition: good (used), Year of construction: 2014, operating hours: 7,145 h, functionality: fully functional, Channel Bale Press Presto HPK 50 HS, Year of Manufacture: 2014 Manufacturer: Presto Model: HPK 50 HS Year: 2014 Drive Power: 30 kW Pressing Force: 50 t Operating Hours: 7,145 Feed Opening: 1600 x 650 mm (LxW) Channel Cross-Section: 700 x 950 mm Max. Filling Volume: 1.06 m³ Cycle Time: 20 s Tying: 4-fold Throughput Performance at 35 kg/m³: 5.5 t/h 60 kg/m³: 8.8 t/h Gsdpfjyz R Eyjx Acwsir 100 kg/m³: 12.7 t/h Bale Weight: up to 500 kg Machine Dimensions: 8420 x 1900 x 2400 mm (LxWxH) Machine Weight: approx. 10,500 kg Materials: Paper, Cardboard, Film, PET bottles Note: All knives and counter-knives as well as all sliding plastics have been replaced. The press is in good condition and has been checked and tested. A video is available on our website or YouTube channel. The operating manual and CE declaration are included. Please note: All technical data is based on information provided by the manufacturer. We do not assume liability for the information provided or for possible errors. This offer is subject to change, prior sale, and can be revoked at any time. Inspections are possible by prior arrangement. Sale is made against advance payment, ex works, without warranty or guarantee.

Condition: good (used), Year of construction: 2015, operating hours: 1,932 h, functionality: fully functional, Baler Presto CC 50 M, semi-automatic, year of manufacture 2015, with lift-and-tilt device Technical Specifications: Manufacturer: Presto Model: CC 50 M Giodpfx Acoyz R Etewsr Year: 2015 Operating hours: 1,932 Pressing force: 50 t Cycle time: 52 s Drive power: 7.5 kW Filling opening: 1030 x 1100 mm Filling volume: 0.85 m³ Tying: 3-fold, wire, manual Throughput depending on bulk density: 35 kg/m³ – 1.3 t 60 kg/m³ – 1.7 t 100 kg/m³ – 2.2 t Bale dimensions: 750 x 1100 mm Bale weight: 300 kg Dimensions: 4705 x 1680 x 2540 mm (LxWxH) Machine weight: approx. 4,000 kg Materials: Paper, cardboard, film The operating manual is available in German. Note: The machine is in good condition. It has been inspected and tested at our premises in 28816 Stuhr. The video is available on our website or YouTube channel. Please note: All technical data is based on information from the manufacturer. We accept no liability for the details provided or for any possible errors. Subject to prior sale; offer is non-binding and may be revoked at any time. Inspections are possible by arrangement. Sale is ex works against advance payment, without warranty or guarantee.

Condition: excellent (used), Year of construction: 2021, CATALOG NUMBER 7852 Technical specifications: - Pressing force: hydraulic - Briquette shape: round - Briquette diameter: 60 mm - Hopper diameter: 1000 mm - Throughput: approx. 110 kg/h - Automatic machine operation Godpfx Acox Hhzvewoir - Oil cooler - Motor: 7.5 kW - Dimensions (L/W/H): 1800x1100x1500 mm - Weight: 730 kg ADVANTAGES – Unpainted – Italian manufacture – Used briquetting machine – Original DTR + CE documentation – Perfect condition, year of manufacture 2021 Net price: 46,900 PLN Net price: 11,170 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (With significant exchange rate fluctuations, the price may change)

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, Press force: 36 t Bending length: 1020 mm Clearance between frames: 932 mm Throat depth: 150 mm Stroke: 120 mm Usable installation height: 295 mm Y-working speed: 10/25 mm/sec Giodpeyz Rwijfx Acwjr Y-rapid traverse: 220 mm/sec Working height: 1150 mm Machine weight approx.: 2,600 kg Space requirement approx.: 1805x1330x2380 mm Operating hours: 3,297 h

Condition: good (used), Year of construction: 2006, functionality: fully functional, Baler Presto CC 30 V, year of manufacture 2006, incoming Technical data: Manufacturer: Presto Model: CC 30 V Year: 2006 Pressing force: 30 t Cycle time: 34 s Drive power: 11 kW Filling opening: 1080 x 950 mm Filling volume: 0.69 m³ Tying: 4-fold, automatic Throughput at bulk density of Giodpfx Aceyz Il Dswor 35 kg/m³ - 2.0 t 60 kg/m³ - 3.2 t 100 kg/m³ - 4.8 t Bale size: 700 x 950 mm Bale weight: up to 350 kg Dimensions: 3650 x 1770 x 2150 mm (LxWxH) Machine weight: approx. 3900 kg Materials: Paper, cardboard, film Please note: All technical specifications are based on the manufacturer's information. We accept no liability for the details provided or for any possible errors. This offer is non-binding, subject to prior sale, and can be withdrawn at any time. Viewing is possible by appointment. Sale is ex works, prepayment, without warranty or guarantee.

Condition: excellent (used), Year of construction: 2013, cutting diameter 400 x 260 mm saw band length 4640 mm cutting width 400 mm Gedpfjymqwlex Acwsir total power requirement 8 kW weight of the machine ca. 2,2 t dimensions of the machine ca. 2,6 x 1,8 x 1,8 m

Condition: excellent (used), pressure 6,3 t throat 200 mm stroke 200 mm dayligth max 500 mm table surface area 450 x 420 mm weight of the machine ca. 1,5 t dimensions of the machine ca. 1,2 x 0,6 x 2,0 m Gjdpfxowuu A Ae Acwoir

Condition: like new (used), Year of construction: 1991, Floor space: 1 m x 0.70 m x H 2 meters. Gooseneck 250. Control panel on the left. Machine in very good condition – used very little. Table 400x360. Drawer with opening. Giedpfx Acsyz Dxaewor

Condition: used, Single-column hydraulic press EXNER Type EEX 20 S - Machine no.: 1615 Year of manufacture: 1980 - Pressing force: 20 tons - Throat depth: 180 mm - Table size: 380 x 350 mm - Table opening: Ø 50 mm - Ram surface: 310 x 250 mm - Clamping shank: Ø 35 mm - Ram stroke: 100 mm - Max. installation height: 250 mm - Table height above floor: 900 mm - Descent speed: approx. 480 mm/s - Return speed: approx. 480 mm/s Gijdjyz Dtdspfx Acwor - Working speed: 20 mm/s - Hydraulic tank capacity: 110 liters - Hydraulic operating pressure at 20 tons: 200 bar - Motor output: 4 kW - Power connection: 400 Volt, 50 Hz - Stroke release via two-hand control or light barrier - Operating modes: setup, two-hand operation, BWS - SICK light curtain, type LVU, with single- and double-stroke settings and safety function - Rapid approach and working stroke - Stroke limitation dependent on pressure or travel - Mechanically adjustable solid stop - Press force adjustment manually via knurled wheel - Control cabinet mounted on the side of the machine - Operating manual and electrical schematics included - Stroke counter - Space requirement (L x W x H): 1250 x 750 x 2000 mm - Weight: 1.4 tons In good condition

Condition: used, Double-column Hydraulic Press SCHÖN Type SH 25 Machine No. 2440 Year of manufacture: 1979 Press force: 25 tons Column spacing: 630 mm Lateral passage between columns: 120 mm Table area: 580 x 320 mm Ram area: 360 x 220 mm Clamping pin hole: Ø 40 mm Godpfxsyz Dr Te Acwoir Maximum ram stroke: 100 mm Maximum installation height: 270 mm Table height above floor: 900 mm Motor power: 7.5 kW Power supply: 380 Volt, 50 Hz - Main cylinder overhauled in 2025 - SICK LUV 206 safety light curtain - Two-hand control - Stroke counter - Rapid stroke and working stroke - Stroke limitation dependent on pressure or position - Mechanically adjustable fixed stop - Press force regulation - Press time extension 1–10 s (pressure holding time) - No operating manual and no wiring diagrams Required space (L x W x H): 1450 x 1100 x 2200 mm Weight: 1200 kg In good condition

Condition: used, Year of construction: 2001, pressure 70 -800 kN chamfer lenght 2505 mm distance between columns 2125 mm Control OP 2000 controlled axis 7 throat 420 mm stroke 200 mm dayligth 470 mm table width 60 mm table height 960 mm ajustment speed 100 mm/sec working feed 10 mm/sec return speed 100 mm/sec weight of the machine ca. 6,3 t Patented Amada technology ensures absolutely correct bending results without bombing device Giodpfx Aoyz Dgwscwsr

Condition: excellent (used), pressure 16 t Gisdpoyrhmhsfx Acwer weight of the machine ca. 16 t

Year of construction: 2021, condition: used, Technical details: pressure: 5 t distance between columns: - mm dayligth: 60 mm rated capacity: 8 kVA table height adjustment: 60 mm compressed air: 6 bar connection voltage: 400 V electrics - voltage/frequency: 400/50 V/Hz total power requirement: 4 kW machine weight ab.: 610 kg SERVO-MECHANICAL SPINDLE PRESS Machine is programmable! MACHINE DESCRIPTION (2 machines available) MACHINE: Electrically driven press with a pressing force of 50,000 N The machine is designed for pressing bearings and rubber seals. It consists of a welded L-shaped frame. A movable press table is mounted on the horizontal arm, which can be manually adjusted along linear guides. In the front position, the table can be manually locked using a spring-loaded pin. In the working position (under the press head), the table is automatically locked by a pneumatic cylinder. The press head can only be lowered using two-hand operation when the table is in this position. The control panel includes: ·Two-hand control switches ·Emergency stop switch ·Table lowering button Gjdpfxoyzzh Es Acweir ·Force selection switches (1, 2) The pressing force can be adjusted using potentiometers in the control cabinet. Two force levels and the corresponding pressing speed can be set there. The press head moves along the vertical arm of the press on linear guides. It is driven by a lead screw, powered by an electric motor with gearbox via pulleys and a timing belt. The entire machine is mounted on a table made of aluminum profiles. *

Condition: good (used), Year of construction: 1999, operating hours: 50,702 h, functionality: fully functional, Baler Paal Konti 325 D/SO, year of manufacture 1999 Technical Data: Manufacturer: Paal Model: Paal Konti 325 D/SO Godpoyzzgnefx Acwsir Year of manufacture: 1999 Operating hours: 50,702 Pressing force: 94 t Drive power: 2 x 45 kW Total connected load: 104 kW Feed opening: 1020 x 1750 mm Bale dimensions: 750 x 1100 mm, variable length Binding: 4-fold automatic Throughput at 35 kg/m³ approx. 14 t/h 60 kg/m³ approx. 24 t/h 100 kg/m³ approx. 38 t/h Bale weight: 525 to 800 kg Transport dimensions: approx. 12,352 x 2,340 x 2,800 mm (LxWxH) Machine weight: approx. 28,000 kg Materials: Paper, cardboard, light waste, plastic waste Please note: All technical data are based on manufacturer information. We do not accept any liability for the stated specifications or possible errors. This offer is non-binding, subject to prior sale, and can be withdrawn at any time. Inspections are possible by appointment. Sale is ex-works against advance payment, without warranty or guarantee.

Condition: excellent (used), Year of construction: 2014, The A 100 N features the same characteristics as the A6 Plus and Junior models; however, it is equipped with a larger motor and hydraulic pump, and a more advanced electrical system. General Features: - Robust construction - Very user-friendly and economical to operate - Easy maintenance - Inspection door with window - Mechanical level probe (rotary paddle switch) - Oil filter in the hydraulic circuit - Pressure gauge for oil pressure monitoring - Oil level switch - Control panel at the front of the machine - Automatic sensor for press start/stop - Emergency stop button - Circuit diagram - CE compliance - Operating manual Technical Data: - Motor power: 7.5 kW, 400 V, 50 Hz connection - Number of press cycles per minute: 14 - Throughput: 60 – 100 kg/h (material-dependent) - Briquette diameter: 65 mm - Number of hydraulic cylinders: 3 Giodpjwyc H Tofx Acwjr - Hydraulic tank capacity: approx. 180 liters - Hopper diameter: approx. 1200 mm Dimensions (L x W x H): 2115 x 1350 x 1700 mm Weight: approx. 1000 kg Including approx. 2 m briquette discharge pipe Note on used machines: - Specifications are subject to change and prior sale. - All prices are ex works – free loading at location. - The machine has been cleaned and tested for functionality. - All machines are sold as inspected, without any warranty or guarantee. Buyers are welcome to inspect the machines on site. - Special agreements are only valid if made in writing. (We will only respond to inquiries that include your address and telephone number!)

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, operating hours: 1,651 h, workpiece height (max.): 60 mm, edge thickness (max.): 3 mm, feed rate X-axis: 25 m/min, HOMAG KAL 310 + Panel Return System TFU 140! TECHNICAL DETAILS Feed speed: 18-25 m/min Workpiece thickness: 8-60 mm Edge material (roll): 0.3-3 mm Gedpjyzxa Esfx Acwjir MACHINE DETAILS Operating hours Operating hours: 6,358 h Feed time: 1,651 h EQUIPMENT Pre-milling Automatic adjustment of infeed fence Infeed device with 2 rollers Quickmelt application unit 2-roller magazine feeder Automatic adjustment of pressure zone HL84 trimming unit with pneumatic adjustment BF10 flush milling unit with pneumatic adjustment FK11 profile milling unit MN21 multi-profile scraper unit for 5 different profiles Grooving unit Glue joint scraper Buffer Return system TFU140

Condition: good (used), Bandsaege Samur Mod S 650 Gijdpfedmykgsx Acwsr Model No. 440.16-103 9-336 m/min.

Condition: ready for operation (used), Vertical bandsaw Hahn + Kolb with Ideal bandsaw blade welding machine and filing machine Giodpfx Acery U Nhewor

Year of construction: 1965, condition: used, Press brake Giedpfx Ajillxyecwer Factory Wilhelm Jonescheit type HYPM 125 -300 stroke 30 - 70 mm pressure 125 t weight 9150 kg

Year of construction: 1960, condition: used, R.A.S. rotary mandrel press Godoic Rn Uopfx Acweir Type 200-20 machine no. 117/6 stroke 200 mm pressure force 20 t spindle diameter 60 mm

Condition: new, stroke: max. 450daylight: max. 900motor power: 22performance of pump: 48oil filling: 120messurements (LxWxH): 3300x1250x2900weight approx.: ca. 4200Cylinder: Ø 360pressure: 400- Pressure adjustment via rotary controlMotorized control via hand leverManually adjustable sliding cylinderClear opening: 1600 × 550 mmStar-delta connection for motor driveHydraulic tank incl. motor is mounted on the lower side of the frame Gijdpfx Aceutuy Aewor Options / surcharges: Pressure control valve: ¤400.00 Speed throttle valve: ¤400.00 Anti-rotation device for piston: ¤250.00 Handwheel for sliding cylinder: ¤950.00 Cylinder adjustable via geared motor: ¤1,700.00 Table support plate (1300 × 850 × 150 mm): ¤3,300.00 All images are for illustrative purposes only and are symbolic photos. The actual equipment may vary slightly.

Year of construction: 2023, condition: used, machine/vehicle number: H300SV23-17, The KTP 300 S is a production press with side extraction of the drawing cushion, capacity 300 t, stroke 1000 mm, max. tool size 1400 x 1200 mm, max. tool weight 5,000 kg, power supply 400V, 50/60Hz, 36kW. Gsdpfoyn Ni Ajx Acwjir

Condition: used, machine/vehicle number: 3218, functionality: fully functional, Boldrini PAO 1000 Hydraulic Dishing Press, 1,000 tonne capacity Gsdpfx Acsyztnwewsir 6,000mm distance between frame 2x GH overhead travelling workpiece manipulation cranes with independently supported runway, each with 2x 16 tonne capacity hoists