Vertical band saw

KASTO KASTOverto A 2

Year of construction: 2007, condition: ready for operation (used), Cutting range round: 560mm, cutting range flat (W x H): 620/560mm, material feed length, single: 900mm, multiple feed: 9999mm, shortest cut length: 6mm, minimum diameter to be cut: 15mm, minimum remnant in single cut: 15mm, shortest remnant length in automatic mode: 80mm, saw motor power, frequency-controlled: 5.5kW, cutting speed, stepless: 13-127m/min, saw blade dimensions: 7400/54/1.6mm, material support height: 700mm, total drive capacity in basic configuration: 12kW, length: 2370mm, width: 3610mm, overall dimensions with chip conveyor (L/W): 2370/3610mm, machine table height lowered: 2230mm, weight: approx. 5.2t with chip conveyor. An inspection on site is possible. Gbsdpfxsxg Rhvo Ah Eew

Condition: good (used), Year of construction: 2004, HSK 63 Gedsznmifopfx Ah Eobw 18.000 rpm Parts shown by hand not come.

Condition: good (used), Year of construction: 2003, All parts shown by hand not come. Technical details are shown on picture. Gsdeyyniaopfx Ah Esbw

Condition: good (used), Year of construction: 2009, functionality: fully functional, Travel distances Max. grinding diameter: 500 mm Max. grinding length: 2000 mm Max. workpiece weight: 500 kg between centers Swiveling of grinding head: +45 / -15° (manual) Grinding wheel: 500/80/203 mm Godpfx Ahoy Idtqs Eobw Accessories: - Steady rest - Enclosure A video of the machine under power can be provided upon request.

Condition: used, Year of construction: 2016, Used 2016 SPINNER U-1520 Machining Centre Supplied with Siemens SINUMERIK 840 control, 12,000 RPM spindle, 32-station tool changer, 80 bar high-pressure coolant, air through spindle, Renishaw probe, touch probe, and additional Ø650 mm rotary table. ----- SPECIFICATION: TRAVELS: - X Axis: 1,500 mm - Y Axis: 500 mm - Z Axis: 600 mm - 4 Continuous Axes + 1 Positioned Axis TABLE: - Rotary Table Diameter: 650 mm - Fixed table: 920x540mm SPINDLE: Gsdozx Ehnopfx Ah Eobw - Max Speed: 12,000 rpm - Taper: SK40 - Air Through Spindle TOOL CHANGER: - Capacity: 32 Tools COOLANT EQUIPMENT: - High Pressure Coolant: 80 bar GENERAL: - Control: Siemens SINUMERIK - Renishaw Probe - Touch Probe - Year of Construction: 2016 Control: Siemens 840D Spec: Travel X 1500 Y500 Z600 | Spindle Speed 12000RPM | SK40 Accessories: 5 axis Table, Fixed Table, 32 Tool Changer

Condition: used, Year of construction: 2018, Technical details: x-travel: 711 mm y-travel: 406 mm z-travel: 394 mm distance spindle nose and table: 546 - 152 mm table-size: 864 x 381 mm table load: 226 kg turning speeds: 15000 1/min power capacity: 11,2 kW max. torque on the spindle: 62 Nm spindle taper: SK 40 Tool changer: 18+1 rapid travel x/y/z: 61 m/min feed: 30,5 m/min max. tool weight: 5,4 kg max. tool length: 178 mm diameter of tools max.: 64 mm Tool change time tool/tool, milling spindle: 1,75 s internal coolant system feed: 21 bar weight of the machine ca.: 2427 kg dimensions of the machine ca.: 2,8 x 2,4 m Vertical 3-axis machining center POS mill 1100, from year 2009 in good condition. Accessories: - Chip conveyor Knoll - additional coolant filtersystem - Programmable coolan jet - automatic Coolant refillsystem - Airpressure through tool - Measuring probe system WIPS - Synchronized treading - Haas Connect remote control Gsdjzxz Hgepfx Ah Eebw - Media Display - Cooling of electrical cabinet - fixtures and tools will not be sold. *

Condition: used, Year of construction: 2003, Lathe DMG Type NEF 320 K Condition: Used Year of Manufacture: 2003 Control: SINUMERIK 810DE-L CCUO Cycles for taper turning and thread cutting Technical Data Swing over bed: 320 mm Swing over cross slide: 150 mm Chuck: 200 mm Cross travel: 150 mm Feed drive AC: 4 m/min Main spindle: Size 6 Spindle bore: 52 mm Spindle mounting: MK 6 Spindle front bearing diameter: 85 mm Godpfxoyrggmj Ah Eobw Drive power: 7 kW Max. torque: 320 Nm Speed range: 14 - 3550 rpm Gear stages: 2 Tool post: Multifix size B Quill: 70 mm Quill stroke: 120 mm Quill mounting: MK5 Dimensions Length / Width: 2600 mm / 1440 mm Weight: approx. 1440 kg

Condition: used, Year of construction: 1991, Technical details: Pressure: 160 t stroke: 500 mm throat: 360 mm max. ram stroke: 500 mm Gbjdpfxow D Awme Ah Eew distance table/ram: 800 mm clamping plate on table: 1250 x 630 x 100 mm passage opening in table: 4x D=62 mm ram speed - forward: 200 m/s ram speed - reverse: 125 m/s ram surface area: 450 x 850 mm mortise hole in ram: 49 mm height over floor: 810 mm total power requirement: 17 kW weight of the machine ca.: 7200 kg dimension machine xH: 2,1 x 1,4 x 3,4 m manual counter *

Condition: good (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 675149, center height: 175 mm, grinding length: 8,000 mm, center width: 1,000 mm, grinding wheel diameter: 450 mm, total width: 1,700 mm, total length: 3,000 mm, grinding diameter: 349 mm, workpiece weight between centers: 100 g, distance between centers: 1,000 mm, type of input current: three-phase, feed length X-axis: 320 mm, feed length Z-axis: 1,000 mm, overall weight: 3,500 kg, year of last overhaul: 2022, input frequency: 50 Hz, rapid traverse Y-axis: 12 m/min, rapid traverse Z-axis: 6 m/min, input voltage: 400 V, workpiece spindle speed (max.): 800 rpm, Dear Sir or Madam, Godpfj Ahv T Hjx Ah Eebw The sale of this machine is strictly limited to end users located within the European Union (EU). Under no circumstances will the machine be sold to dealers, resellers, or intermediaries. Sales are exclusively intended for end users, manufacturing companies, and companies that will directly operate the machine. Control System Control system manufacturer: FANUC Control system type: GE FANUC Series 21i-T Work Area Center height: 175 mm Distance between centers: 1,000 mm Grinding length: approx. 800 mm Max. workpiece diameter: approx. 349 mm Electrical data according to your specifications Connection voltage: 3400 V Operating voltage: 3400 V Frequency: 50 Hz Control voltage: 24 V Rated current: 20.5 A Main fuse: 25T A Grinding technology according to the documentation Grinding spindle power: 5.0 kW Grinding spindle speed: 800–1,900 rpm Grinding wheels: depending on the design, up to approx. Ø 450 mm X-axis resolution: up to 0.1 µm Workpiece spindle speed range: approx. 8–800 rpm Automatic indexing: provided for the UR version Further technical data from the manufacturer's documentation Max. ambient temperature: 40 °C Max. humidity: 75 % Sound pressure level: approx. 70 dB(A) Machine weight: approx. 3,500 kg Sale without tools and without additional accessories. The machine is sold exclusively with the described standard configuration. Inspection possible by appointment. Sale ex works Syntegon. Loading and transport are the responsibility of the buyer. Sales/transfer conditions: • Sale exclusively to end users/manufacturing companies (no resale to dealers) – corresponding company profile required. • Disassembly, removal, and transport are the responsibility of the buyer and at the buyer's risk. • The buyer is responsible for providing personnel, tools, and transport equipment. Personnel may only work with appropriate personal protective equipment, and only trained personnel may be used.

Condition: good (used), Year of construction: 2011, Maximum grinding diameter 290mm, maximum grinding length 800mm, grinding wheel size 290mm x 63mm bore. Control Fanuc 21i-TB, workhead speed 1,000rpm, spindle power 5Kw, table swivel +6/-3.5 degrees, workhead swivel angle 0-90 degrees. internal spindle motor 1.5kw. Gbjdetudfdepfx Ah Eew fitted with coolant.