Used Baguette Moulder for sale (778)

Condition: used, Year of construction: 2006, functionality: limited functionality, machine/vehicle number: 106196, planing height: 200 mm, spindle diameter: 90 mm, planing width: 300 mm, spindle speed (max.): 8,000 rpm, height adjustment type: electric, compressed air connection: 8 bar, number of spindles: 5, For sale is a planing line by Weinig, complete with associated mechanisation from Kallfass (before and after the planer). The planing line is currently no longer in daily production. The operator side (left) first spindle and its mounting are defective. Weinig Moulder: Weinig Powermat 2000XL (year 2006) with 5 spindles (Weinig Powerlock system) plus chamfering unit. "Set-up time savings!" Spindle arrangement: bottom, right, left, top, bottom. The bottom and top spindles are both equipped with a jointing device. Spindle motor ratings: bottom 23.5 kW / right 15 kW / left 15 kW / top 28.5 kW / bottom 28.5 kW. Spindle speed: 8,000 rpm. The feed has a 15 kW drive motor, providing feeding speeds from 6 to 60 m/min. Compressed air requirement: nominal pressure 8 bar, operating pressure 6 bar. Workpiece dimensions for processing in the planing line: Shortest part: 2.00 m Longest part: 11.00 m (depending on mechanisation) Minimum thickness: 19 mm Maximum thickness: 200 mm Minimum width: 40 mm Maximum width: 300 mm Maximum profiling depth: 35 mm Feed rate: 6–60 m/min. Splitting is possible on the fifth lower spindle up to 60 mm height. Cjdpfx Aoyzibmjkcsgt Mechanisation: Kallfass "HmoK10000" year 2006 (operational/used) Before and after the planing line there is mechanisation by Kallfass. There is the option to buffer 2–3 packs before the unit, which must then be manually destacked before the infeed. Layer formation after the planer is performed by a paternoster unit with 3 adjustable walls. The maximum component length for this setup is 11.00 m. Price is quoted net ex works, without warranty. Complete disassembly is to be carried out by the buyer. A large inventory of cutterheads, spare parts, and various extraction components is available and can be purchased separately.

Condition: good (used), functionality: fully functional, working width: 240 mm, planing height: 160 mm, spindle diameter: 50 mm, planing width: 240 mm, working height: 160 mm, power of feed motor: 4,000 W, spindle speed (max.): 7,000 rpm, spindle speed (min.): 7,000 rpm, height adjustment type: electric, type of input current: three-phase, number of spindles: 5, power: 39 kW (53.03 HP), Equipment: cabin, motor brake, Weinig Unimat 1000 with grooved bed Working width: 240 mm, Working height: 160 mm, 5 spindles Spindle diameter: 50 mm Spindle arrangement: 1-Bottom (7.5 kW) 7000 rpm 2-Right (7.5 kW) 7000 rpm 3-Left (7.5 kW) 7000 rpm 4-Top (7.5 kW) 7000 rpm 5-Bottom (5.5 kW) 7000 rpm Feed: 4 kW / 6 – 36 m/min, Codpfox Dzc Ssx Akcogt One powered roller in the table at the outfeed.

Condition: refurbished (used), Year of construction: 1994, working width: 240 mm, planing height: 160 mm, planing width: 240 mm, working height: 160 mm, spindle speed (max.): 6,000 rpm, spindle speed (min.): 6,000 rpm, rotational speed (max.): 6,000 rpm, rotational speed (min.): 6,000 rpm, workpiece height (max.): 160 mm, compressed air connection: 6 bar, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, input current: 111 A, We are offering this fully overhauled OTTO MARTIN T 90 planing and profiling machine, year of manufacture 1994. Model: T 90 Serial number: V 215410 Year: 1994 Working width: 240 mm Working height: 160 mm Speed: 6000 rpm Voltage: 400 V Frequency: 50 Hz Cjdeyq D Ifjpfx Akcsgt Number of phases: 3 ~ Rated current: 111 A Operating pressure: 6 bar If you have any questions or require further information, please feel free to send us a message or call us.

Condition: like new (used), Year of construction: 2024, functionality: fully functional, Max feeding speed 200 m/min • Electronic speed control 30 - 200 m/min • Max working width 250 mm • Minimum working height 12 mm • Max working height 100 mm • Spindle speed 5000 & 6000 r.p.m • Spindle diameter 50 mm. Cgjdpfoyzdtkox Akcot For a separate fee, it can be dismantled and loaded onto a transport vehicle.

Condition: excellent (used), Motor 9.5 kW, spindle 30 mm, table length 240 cm, width 35/120 cm Cgedpoyy Np Iofx Akcst

Condition: ready for operation (used), Year of construction: 1990, functionality: fully functional, Planer and moulder Cgjdpfeyyyp Eox Akcet

Condition: ready for operation (used), Year of construction: 2017, Number of boring spindles 4 St. Working width 230 mm Working height 160 mm Feed motor 11 kW Feed speed 60 m/min. Control Memory Plus Cjdpsyhfhnefx Akcegt

Year of construction: 2026, condition: new, - With 5 spindels - Grooved table for short pieces Outstanding characteristics: Cgodpfegp Dcqox Akcot Sealed safety hood to reduce noise levels and prevent chips from splash Adopting stepless variable feed speed, inverter feed speed of 6- 30 m/min Each spindle driven by independence motor with powerful cutting To fit with heavy – duty cutting as equipping with two pairs of high precision bearing at two ends of spindle assembly Centralized spindle adjustment on the front panel is easy to work Hard Chromed electro plated treatment has been adopted for the durability of the work table surface Short feeding device is equiped for smooth feed avaliably Bottom driving roller to improve feeding performance Pneumatic pressure feed wheel can be seperately adjusted, make for feed pieces with various thickness Manual oil pump to lubricate the working tables and slides, to be easy to centralized control Pre- trimming cutter on the first bottom shaft and teethed work table was designed to reduce the noise level effectively and cut out the precise linearity Removable work table of vertical spindle was designed of dust proof of efectively protect the screw bar from pollution Special hardness treatment of HRC 58 has been adopted on the work table beside of the first bottom spindle for increasing the durability and natural life of the work table surface Adopting electric component from international class with steady quality TECHNICAL SPECIFICATIONS: - Working width (min): 20 mm - Working width (max): 240 mm - Working thickness (min): 8 mm - Working thickness (max): 180 mm - Number of spindels: 5 kos - spindle speed: 6000 r/min - Diameter of Spindle: 40 mm INSTALLED CUTTER-BLOCKS (from first to last): - first bottom spindle: diameter 108- 145 mm - right spindle: diameter 108- 200 mm - left spindle: diameter 108 -200 mm - first top spindle: diameter 108- 200 mm - second bottom spindle: diameter 108- 200 mm MOTOR POWER: - first bottom spindle 5,5 KW (7,5 HP) - right spindle 5,5 KW (7,5 HP) - left spindle 7,5 KW (10 HP) - first top spindle 7,5 KW (10 HP) - second bottom spindle 7,5 KW (10 HP)

Condition: new, work table dimensions 2500 x 780 mm spindle DM 30 mm tilting of spindle +/- 45,50 usable spindle lenght 140 mm Max. tool DM under table 300 x 80 mm suction DM 1 x 120 & 2 x 100 mm Motor elektrospindel 7,50 kW elektro spindel with inverter for speed 900 to 12.000 RPM control panel with mit "Easy Touch 7" program "Flex"- fence with autom. adjustment via 'Easy Touch 7' left right turning of spindle table elongation front INCL. OPTIONS: - "Fast” table with autom. adjustment via 'Easy Touch 7' control - version “LL” with 2 cast iron tables (2500 mm) Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. Cgjdpfxsd Etkho Akcot • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: new, Year of construction: 2023, Stable cast iron construction Milling spindle can be swiveled backwards from 0° to -45° Right-left rotation of the milling spindle Generously dimensioned milling unit made of cast iron, attached directly to the table Cgodpfxsiknp Ro Akcot Solid and precise cast iron table Standard curved milling protection hood Aluminum sliding carriage ball contact system Torsion-resistant, highly precise, smooth-running and problem-free in daily use 10-year SCM guarantee on wear of the guideways Milling spindle mounted high up with precision ball bearings, resulting in the lowest possible bearing load and the longest possible service life Exact router fence with quick adjustment and fine adjustment with a scale on the stop jaw Integrated suction connection Large milling table opening allows the use of larger tools Weight approx. 290 kg Extraction connection diameter 2 x 120 mm Working table L x W = 1000 x 435 mm Table height 900 mm Sliding carriage length 1000 mm Sliding carriage width 270 mm Drive motor power 5.0 kW, 400 V, 50 Hz Milling spindle inclination 0 to -45 ° Spindle usable length 100 mm Overhang max. above table 130 mm Spindle speeds 3500/7000/10000 rpm Mandrel diameter 30 mm Tool diameter max. lowerable 180 mm

Condition: repair required (used), 628 USED baguette-croissant maker Uniwersum 30/50. It has the ability to make croissants and baguettes. The machine requires renovation. The device is available to verify in our warehouse (36-068 Bachórz, Poland). Paid options available: transport / assembly / commissioning of the device. The price is a net price. Cgedpjn Avdcsfx Akcot Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN.

Condition: good (used), functionality: fully functional, working width: 255 mm, planing height: 160 mm, spindle diameter: 40 mm, planing width: 255 mm, working height: 160 mm, power of feed motor: 3,000 W, spindle speed (max.): 6,000 rpm, spindle speed (min.): 6,000 rpm, height adjustment type: electric, planer shaft diameter: 40 mm, type of input current: three-phase, number of spindles: 5, input frequency: 50 Hz, Equipment: cabin, motor brake, Weinig Unimat 23 E with 5 spindles, Working width: 255 mm, Working height: 160 mm, Spindle diameter: 40 mm, Feed: 3 kW / 6 – 36 m/min, Cgodpfx Ajxg Sa Hokcst Spindle arrangement: 1-Bottom (5.5 kW) 2-Right (5.5 kW) 3-Left (7.5 kW) 4-Top (5.5 kW) 5-Bottom (4.0 kW) One driven roller at the outfeed table.

Condition: repair required (used), Year of construction: 1996, functionality: not functional, machine/vehicle number: AA17762, Working dimension X 3.200 mm Working dimension Y 1.400 mm Working dimension Z 400 mm Number of milling spindles 2 Main motor power 7,5 kW Rotation speed max 18.000 rpm Torque support Tool clamping system ISO 30 Tool changer positions 20 Cjdeufghuspfx Akcjgt Bauform Standportalmaschine Yes Machine table Matrix table 2 tables Vacuum pump Capacity vacuum pump 500 m³/h Safety device enclosed cabin Control NUM 720 Conformity marking CE mark

Condition: used, Year of construction: 2003, Overview This rotary PET blow moulding machine was manufactured in 2003 by the German company Krones. The S8 model is designed for the production of high-quality PET bottles and adjusted for 1.5 L bottles and neck PCO1881. The machine remains in good operational condition, is immediately available, and can be integrated into existing production lines for beverages such as water, CSDs, or juices. Air conveying system is available. Technical data  Application: PET bottle production Capacity: 14,000 bph year of manufacture: 2003 Bottle Formats: 1.5 L  Neck Finish: PCO1881 center-cooling air conveying system available scope of supply: blow moulder Krones Contiform S8 (2003) cooling unit preform feeding preform container preform tilting device air conveying system available Cjdsyucauspfx Akcegt

Condition: excellent (used), working width 230mm working height 120mm Codpfx Ajyxltgskcogt 5 heads heads set: bottom/right/left/top/bottom spindles diameter 40mm variable regulated feeder feeder with cardan pneumatic pressure of feeding rolls table lubrication

Condition: excellent (used), working width 230mm working height 120mm 6 heads heads set: bottom/right/left/top/bottom/universal two axes heads regulation Cedpfx Ajyxlr Njkcjgt spindles diameter 40mm spindles speed 6000 RPM variable regulated feeder digital displays of working dimensions electric regulation of pressure rolls pneumatic pressure of feeding rolls grooved table

Condition: excellent (used), working width 230mm working height 120mm 4 spindles spindles diameter 40mm spindles speed 6000 RPM Codpfx Aksyxlriscegt variable regulated feeder pneumatic pressure rolls electric adjustment of top head table lubrication

Condition: excellent (used), working width 230mm working height 120mm 5 heads heads set: bottom/right/left/top/uni two axes heads regulation pneumatic clamps variable regulated feeder spindles diameter 40mm Csdoyxlrcepfx Akcegt delta/star start table lubrication

Condition: excellent (used), working width 220mm working height 120mm 4 heads spindles diameter 40mm variable regulated feeder delta/star start two axes heads regulation electric regulation of pressure beam spring pressure of feeding rolls spindles speed 6000 RPM Cgsdjyxlqxspfx Akcot

Condition: used, Year of construction: 2001, functionality: fully functional, machine/vehicle number: 92698, feed rate Z-axis: 8 m/min, working width: 230 mm, planing height: 120 mm, spindle diameter: 40 mm, power of feed motor: 1,500 W, rotational speed (min.): 6,000 rpm, compressed air connection: 10 bar, number of spindles: 4, power: 31 kW (42.15 HP), Equipment: cabin, We are offering our four-sided planing machines from Weinig, which can be used for smooth four-sided planing, two-sided chamfering, or profiling. Tongue and groove boards, log house beams, or any other profile can be clamped into the profile cutter heads. The machine is constantly in use and is only being replaced due to the acquisition of a larger one. Cgedpfxjyxggzo Akcjt

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: QPCOCE754005004, overall weight: 1,350 kg, input voltage: 400 V, input frequency: 50 Hz, input current: 16 A, Subscrisa, DDG INSOLVENCY I.P.U.R.L., cu sediul în Cluj-Napoca, str. Septimiu Albini, nr. 115, jud. Cluj, CIF RO27987796, nr. matricol: 2A0522, prin practician în insolvență Godorogea Daniel-Lucian în calitate de lichidator judiciar al societății ELEMENTO MOBILI S.R.L. - în faliment, in bankruptcy, en faillite, cu sediul social în mun. Dej, str. Dumbrava Roșie, nr. 6, et. parter, ap. 1, jud. Cluj, înregistrată la Registrul Comerțului de pe lângă Tribunalul Cluj, sub nr. J12/2389/2016, cod unic de înregistrare 36225390 desemnat în această calitate prin Încheierea Civilă nr. 1278 din data de 03.07.2025 pronunțată de Tribunalul Specializat Cluj în dosar nr. 442/1285/2025, organizează licitație publică cu strigare, cu preț în urcare, pentru vânzarea bunului identificat in prezentul anunt. Prima licitație va avea loc la data de 08.04.2026 la ora 15:00, la sediul DDG Insolvency I.P.U.R.L. din Cluj-Napoca, str. Septimiu Albini, nr. 115, jud. Cluj. În caz de neadjudecare licitația se repetă în data de 15.04.2026, 22.04.2026, 29.04.2026, 06.05.2026, 13.05.2026, în aceleași condiții și la aceeași oră. În vederea vizionării bunurilor, lichidatorul judiciar va stabili o zi de vizionare în data de 06.04.2026 între orele 09:00-12:00. Cei interesați de vizionare sunt invitați să contacteze lichidatorul judiciar la nr. de telefon 0763 478 619 și să își exprime intenția de participare, anterior datei stabilite. Pe parcursul organizării ședințelor de licitație publică, lichidatorul judiciar va mai organiza zile de vizionare, care vor fi aduse la cunoștință persoanelor interesate. În caz de adjudecare, lichidatorul judiciar va emite factura fiscală pentru contravaloarea bunurilor adjudecate. Conversia prețului în lei se va realiza la data emiterii facturii fiscale, utilizând cursul de schimb stabilit de BNR pentru acea dată. Pasul de licitație este de 5% din prețul de pornire. Caietul de sarcini în vederea participării la licitație va fi întocmit de către lichidatorul judiciar în concordanță cu uzanțele în materie, va conține regulamentul de participare la licitație și se va valorifica de către practicianul în insolvență, la prețul de la prețul de 500 lei+TVA. Acesta poate fi achiziționat de la sediul lichidatorului judiciar, sau telefonic urmând a fi transmis participantului prin e-mail. Garanția de participare la licitație va fi în cuantum de 10% din prețul de pornire. Aceasta împreună cu documentația de înscriere la licitație vor trebui depuse cu cel puțin 24 de ore anterior datei licitației la sediul lichidatorului judiciar. Garanția de participare la licitație va fi dedusă din prețul bunurilor pentru care participantul a fost declarat adjudecatar și va fi restituită persoanelor care nu au fost declarate adjudecatari. Codeyfmrpspfx Akcsgt La preț egal, va fi declarat adjudecatar persoana care se va angaja să achite întregul preț în termenul cel mai scurt. Termenul de plată al prețului va fi de 5 zile lucrătoare de la momentul adjudecării. În cazul în care nu se va achita și restul de preț, adjudecatarul va pierde avansul achitat cu titlu de garanție și nu va mai putea participa la următoarele licitații care se vor organiza.

Condition: excellent (used), working width 230mm working heigth 120mm 4 spindles spindles diameter 40mm pneumatic clamps of feeding rolls two axes heads regulation Cgodjyxd Hlspfx Akcjt variable regulated feeder delta/star start electric regulation of top head

Condition: excellent (used), working width 230mm working height 120mm 4 spindles spindles diameter 40mm pneumatic pressure of feeding rolls Cgsdpfx Akeyxd Hfscjt two axes heads regulation two feeding speed delta/star start electric regulation top head

Condition: good (used), functionality: fully functional, working width: 260 mm, planing height: 170 mm, spindle diameter: 40 mm, planing width: 260 mm, working height: 170 mm, power of feed motor: 4,000 W, spindle speed (max.): 6,000 rpm, spindle speed (min.): 6,000 rpm, height adjustment type: electric, type of input current: three-phase, shaft diameter: 40 mm, number of spindles: 5, input frequency: 50 Hz, Equipment: cabin, motor brake, Weinig Profimat 23 E Working width: 260 mm, Working height: 170 mm, 5 spindles, Spindle diameter: 40 mm, Spindle configuration: 1- Bottom - 5.5 kW 2- Right + 3- Left - 11 kW 4- Top - 5.5 kW 5- Bottom - 11 kW Feed speed: 6 – 24 m/min - 4 kW Csdpfoyc Nubjx Akcegt Air cushion in the table One powered roller in the table at the outfeed. Comes with tooling.

Condition: good (used), Year of construction: 1979, functionality: fully functional, Four-sided planer / moulder Unimat 22N, 7 spindles Year of manufacture 1979 S/N 286512746 Manufacturer Weinig Germany planing width 220mm Planing height 120 mm 7 planer shanks: planing table length 2000mm Cgodpfx Ajt Eu Htjkcet Spindle arrangement (speed of the working spindles 6000 rpm) 1. bottom, 4 kW 2. left, 5,5kW 3. right, 7.5 kW 4. left, 4 kW 5. top, 7.5 kW 6. bottom, 7.5 kW 7. bottom, 4.0 kW 5, 6, 7 with counter bearing 3 rollers in the table (not driven) spindle diameter 40 mm Flying circle of the dressing spindle 125mm Flying circle of the dressing spindle 100-180mm Largest flying circle of the milling spindles 180mm Cardanic feed Feed infinitely variable (frequency converter) 6-36 m /min. Manual Waxilit pump External dimensions L 4500 mm x W 1600 mm x 1700mm 4500 kg with 7 planer/knife heads included