Table mill

Bäuerle SFM 2

Condition: used, used, good condition, low operating hours Machine thoroughly cleaned, lubricated Test run performed Dujdoycxg Hopfx Aayew Spindle runout measured max. 0.1 mm Manufacturer: Bäuerle Model: SFM 2 Machine no.: B1533 tilt range from -5° to +45° mechanical brake 6 speed levels: 2800/4500/5600/9000/6000/12000 rpm forward/reverse rotation Table size: 1100 mm x 900 mm spindle diameter: 30 mm cast iron fence jaws milling fence with fine adjustment extraction port D 120 mm required space approx. 1100 x 1100 x 1200 mm weight approx. 1000 kg Location: 97447 Gerolzhofen, loaded free on truck, unpacked Delivery in as-is condition as inspected, without guarantee or warranty

Condition: used, Used machine Jointer: Working width: 500 mm Dujdeza I Tkepfx Aaysw Total table length: 2200 mm 4-knife cutterhead with segmented planer knives Motor: 4 kW Thickness planer: Min. working height: 3 mm Max. working height: 235 mm Max. chip removal: 8 mm Digital height adjustment display with decimal readout Feed speed: 7.5/15 m/min Availability: short-term Storage location: Flörsheim

Condition: used, Used, excellent condition, including milling fence. Dusdpfxsyt R Nuj Aaysw Milling fence with fine adjustment, central adjustment via rack and pinion. Machine fully cleaned and lubricated, partially overhauled. Various parts replaced. Star-delta switch overhauled. Foot brake adjusted. Fence jaws replaced. Spindle runout checked: precise, only 0.01 mm tolerance. Brand: Bäuerle Model: SFM 2 Machine No.: 8719 Tilting range: 0 to 45° Brake Motor with 2 speeds/pole changeable 6 speed levels: 1,800 / 4,500 / 5,600 / 6,000 / 9,000 / 12,000 rpm Reversible direction of rotation Table size: 1150 x 1200 mm Spindle diameter: 30 mm Milling fence Required space: approx. 1200 x 1200 x 1300 mm Weight: approx. 1,000 kg Location: 97447 Gerolzhofen, loaded free of charge, unpacked Sold as seen, function tested. No overhaul, no warranty or guarantee.

Condition: excellent (used), Surface Planer / Jointer, used Working width: 520 mm Total table length: 3000 mm Infeed table length: 1780 mm Outfeed table length: 1180 mm Adjustable fence with angle, size 1500 x 175 mm Motor power: 4.0 kW, 400 V, 50 Hz Cutterhead speed: 5000 rpm 4-knife cutterhead, diameter 120 mm Max. cutting depth: 8 mm Extraction connection: Ø 120 mm Table height: 860 mm Dusdsy Emf Repfx Aayew Hydraulic table height adjustment with foot pedal Numerical cutting depth display Noise reduction combs on the cutterhead Star-delta starter Emergency stop button CE marked Including all documentation Knife setting gauge NEW drive belts NEW cutterhead bearings NEW planer knives Dimensions (L x W x H): 3000 x 950 x 1100 mm Weight approx. 900 kg Note on used machines: • Errors in technical data and prior sale reserved. • Quoted prices are ex-location, loaded free on truck. • The machine has been cleaned and function-tested. • All machines are sold as inspected, without any guarantee or warranty. Buyers are welcome to inspect the machine at its location. • Special agreements are only valid in written form. (We will only respond to inquiries with your address and telephone number!)

Condition: used, Year of construction: 1985, Used machine Year of manufacture: 1985 Features and technical specifications: - Surface planer table width: 410 mm - Surface planer table length: 2,650 mm Djdpjykcymefx Aayouw - Cutter block: 4x strip planing knives - Motor: 3 kW - Planer fence can be tilted up to 45° The machine does not have a motor brake and can therefore only be sold as a source of spare parts! Availability: short-term Location: 63934 Röllbach

Condition: used, Width 500mm Dsdpor Iqiqefx Aaysuw 4 irons Tree protector 5.5hp engine 380V

Condition: excellent (used), Planing width 520 mm Min./Max. working height 3 – 240 mm Motor power 5.5 kW, 400 V, 50 Hz Speed of planing shaft 4500 rpm Diameter of planing shaft 120 mm Planing knives 4 pcs Dimensions of thickness table 520 x 850 mm Feed rate 6.5 / 10 / 13 / 17 m/min Dust extraction diameter 150 mm Electric height adjustment Handwheel for fine adjustment of thickness table height Spiral-toothed steel feed roller Segmented pressure bar 2 steel extraction rollers Table roller Low voltage release Emergency stop switch Knife setting gauge Test report for conformity with Section 4 of the AM-VO NEW V-belts NEW BALL BEARINGS NEW PLANING KNIVES Dimensions approx. L x W x H = 1120 x 990 x 1000 mm Weight approx. 600 kg Note on used machines: Dodey Egmuepfx Aayouw • Subject to errors in technical specifications and prior sale. • Prices quoted are ex-works, pick-up only – free loading! • The machine has been cleaned and function-tested. • All machines are sold as seen, without any warranty claims. The buyer is free to inspect the machines at our location. • Special agreements are only possible in written form. (We will only answer inquiries if you provide your address and telephone number!)

Condition: used, Thickness planer SCM S 63 - used - Segmented pressure beam, Under-table roller, Separate feed motor ----- Technical specifications ----- Planing width: 630 mm, Number of knives: 4 pcs., Passage height: 235 mm, Dodpfoxm R Uvex Aayjuw Feed speed: 6 /9/12/18 m/min., Extraction nozzle Ø: 180 mm, Weight: 1035 kg

Condition: ready for operation (used), power: 0.003 kW (0.00 HP), planing width: 410 mm, rotational speed (min.): 5,500 rpm, overall weight: 700 kg, total length: 26,000 mm, chip removal for surfacing (max.): 8 mm, number of planer blades: 4, table length: 2,600 mm, SCM surface planer type F4L -Working width: 400 mm Duodpfxstxqgdj Aayjw -number of knives: 4 pieces -chip removal: 0 - 8 mm -Motor: 3 kW -Speed of planer blade: 5500 rpm -Table: 2605 x 400 mm -Dimensions: 870/2605/H980 mm -Weight: 700 kg Price 2500.

Condition: used, Year of construction: 1995, SPINDLE MOULDER WITH LONG TABLE & POWER FEEDER Brand: ROBLAND Model: T120S-L-P Year: 1995 Machine offered as-is, without warranty SPINDLE MOULDER CAPACITIES: - Spindle diameter: Ø50 mm Useful length (above the table): 150 mm Vertical spindle stroke: 205 mm - Spindle speeds: 3000/4500/6000/7000 rpm MACHINE SPECIFICATION: - Sturdy welded steel frame - Cast iron table (LxW): 310x190 mm Side extensions: 670x250 mm Frontal table extension: 2460x620 mm with entry roller Table rings: Ø350; Ø250; Ø200 Raised tool passage in table: Ø320 x 95 mm - Wooden fences: 530x150 mm Fine adjustment of the hood and indexed stops Maximum tool diameter for guide work: Ø250 mm TENONING: - Sliding tenoning carriage 760x500 mm Equipped with graduated transverse stop with adjustable end stop Adjustable support arms ensure complete rigidity of the carriage rail - Adjustable tool approach table with eccentric clamp - Angular adjustment of the fence with graduation from 0 to 45° - Tenoning hood guard - Maximum tenoning tool diameter: Ø350 mm Equipped with a power feeder: - Brand: Polymatic Year: 1996 - Power: 0.75 kW - 3 rubber feed rollers - 2 feed speeds (mechanical and electrical) OTHER CHARACTERISTICS: - Electrical supply: 380V, 3-phase + T, 50Hz - Manual star-delta starting - Installed power: 6.25 kW - Main motor power: 5.5 kW (7.5 HP) - Lockable isolator, emergency stop button - Safety guard for guide operations Duedpfsx Igzqox Aayow - Dust extraction inlet on spindle hood Ø120 mm Lower suction port Ø120 mm Dimensions (LxWxH): 270x165x165 cm Weight: 800 kg