Used Baguette Moulder for sale (800)

Condition: good (used), SCM P64 Four-Sided Planer - Planing width 18 cm - Planing height 12 cm - Cutterhead set, standard cutters - 2 feed speeds - Electric height adjustment for the upper planing head and feed rollers - All spindles are adjustable vertically and horizontally Lredjzv Scaepfx Ahker Machine in very good condition.

Condition: like new (used), Year of construction: 2023, functionality: fully functional, Factory new – never installed! Weinig Hydromat 4300, high speed planer and moulder Feed speed 30-300 m/min Spindle 1 (Bottom) – Radial CNC-controlled adjustment – Hydro bearing with automatic locking – Straight jointer, fully automatic Spindle 2 (Top): – Radial and axial CNC-controlled adjustment – Hydro bearing with automatic locking – Straight jointer, fully automatic Spindle 3 (Right): Ljdpfxezu Awre Ahksrr – Radial and axial CNC-controlled adjustment – Straight jointer, fully automatic Spindle 4 (Left): – Radial and axial CNC-controlled adjustment – Straight jointer, fully automatic Spindle 5 (Top): – Radial and axial CNC-controlled adjustment – Hydro bearing with automatic locking – Straight jointer + profile jointer fully automatic Spindle 6 (Bottom): – Table tops with wood inserts, maximum cutting height of 65 mm with a flange of 100 mm – Rotaplan pressure plate above the bottom shaft – Radial and axial CNC-controlled adjustment – Straight jointer, fully automatic – Hydro bearing with automatic locking General: – Horizontal CNC-controlled pressure rollers – CNC-controlled positioning input – Marathon Powercoating Plus – Automatic waxilit pump – Weinig WMC with touchscreen – Kickback protection for sawing operations – Machine with spindle and feed brakes – Safety and sound insulation housing

Condition: used, Year of construction: 1986, Table milling machine Manufacturer: Schneider Ledpfx Aszuyxajhkerr Type: SK2/4 II Year of manufacture: 1986 Technical data - 3,000 - 10,000 rpm - Runs in both directions (left/right) - with Haffner feed unit - including accessories Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: used, Swivel spindle milling machine Manufacturer: Schröder Table dimensions: - Width 1,260 mm + 430 mm extension - Depth 770 mm + 400 mm extension Ledpfozuyw Njx Ahkorr Spindle diameter: 30 mm Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: excellent (used), Manufacturer: Bäuerle Type: SFM 200 Table size: 2000 × 900 mm Extendable frame support Tiltable from -5° to +45° Motor power: 5 / 6 kW Spindle bore: 30 mm Speed: 3000 / 4500 / 6000 / 9000 / 12000 rpm Motorized height and tilt adjustment Motor brake Feed: 4 rollers Very good condition Ljdpfx Ahszv Ez Aekorr

Condition: like new (used), Year of construction: 2022, operating hours: 496 h, functionality: fully functional, feed rate X-axis: 40 m/min, working width: 240 mm, planing height: 120 mm, spindle diameter: 40 mm, planing width: 240 mm, working height: 130 mm, total width: 1,745 mm, power of feed motor: 4,000 W, spindle speed (max.): 6,000 rpm, spindle speed (min.): 6,000 rpm, rotational speed (max.): 6,000 rpm, rotational speed (min.): 6,000 rpm, workpiece height (max.): 120 mm, type of input current: three-phase, workpiece width (max.): 240 mm, input voltage: 400 V, table length: 2,500 mm, number of spindles: 7, input frequency: 50 Hz, table width: 230 mm, Equipment: motor brake, SCM Superset NT – four-sided planer, 2023, 496 operating hours Automatic in-line planer for four-sided planing and profiling. Manufactured in 2023, with only 496 hours of operation – practically a new machine. EQUIPMENT - SCM Mobile 10 control system – 10-inch touchscreen - Memory: 999 programs, 300 tools - HSK quick-change tool holder - Centralized automatic lubrication system - Motorized feed rollers TECHNICAL DATA - Spindle diameter: 40 mm - Min. workpiece cross-section: 25 × 6 mm - Profiling tool diameter: 100–200 mm - Vertical spindle axial adjustment: 80 mm Lodpfxozvy Htj Ahkorr - Horizontal spindle axial adjustment: 45 mm - Noise level: 76.5 dB(A) on the feed side / 73.0 dB(A) on the outfeed side Detailed technical specifications – number and arrangement of spindles, working width and height, feed speed, motor power – available upon request. Inspection and demonstration under power by prior appointment in Kalnciems, Latvia. Price EXW Kalnciems. We can arrange dismantling and loading for export.

Year of construction: 2002, condition: excellent (used), The Sedgwick spindle moulder is designed with a backward tilting spindle - 45 degrees with a forward tilting of 5 degrees. Motor Power 4kw 1.1/4" Spindle diameter Spindle length 140mm Ledpfxszumtqj Ahkjrr Ex College Machine - Like New Year 2002

Condition: used, Robland NLX1700 panel saw and spindle moulder, very good condition, 2x3 kW, approx. 2000 mm cutting length, approx. 100 mm cutting height, 1700 mm sliding table length, approx. 450 kg Lredpfjwzzh Esx Ahkjr Subject to price changes, errors, misprints and typographical mistakes excepted.

Condition: new, Catalog number: S0367 TECHNICAL DATA dimensions of the work table: 800x800mm motor power S1/S6: 3.0 / 4.4kW diameter of the hole in the table: 190mm spindle diameter: 30mm spindle tilt: 0° -45° spindle speed: 1400 / 3500 / 6000 / 8000rpm rotation: right, left vertical spindle travel: 175mm working height of the spindle: 125mm max. tool diameter for profiling / for tenon machining: 180/250mm diameter of the extraction nozzle: 120mm dimensions L/W/H: 2800x1800x1090mm weight: 410kg – machine is new – tilting spindle – with side table Net price: 17200 PLN Ledszullfepfx Ahkorr Net price: 4100 EUR, depending on an exchange rate of 4.2 EUR (Prices are subject to change due to exchange rate fluctuations)

Condition: excellent (used), Catalog number: 8073 TECHNICAL DATA - Spindle diameter: 30mm Lrjdjzuk Daopfx Ahker - Spindle working height: 100mm - Adjustable up/down and angle - Original guide - Crosscut carriage - 4 types of rotational speeds: 3000, 6000, 8000, 10000 rpm - Table dimensions with carriage: 660x950mm - Cast iron table - With electric brake - Motor: 4kW - Dust extraction port diameter: 120mm - Dimensions (L/W/H): 980x810x1350mm - Weight: 230kg ADVANTAGES - Made in Germany - Crosscut carriage - Tilting spindle - Brake - Unpainted - Used milling machine, very good condition Net price: 8900 PLN Net price: 2119 EUR, depending on the exchange rate of 4.20 EUR (Prices are subject to change due to exchange rate fluctuations)

Condition: used, GS-tested Milling stop with fine adjustment / handwheel adjustment Individual chuck adjustment Machine cleaned, partially overhauled, Test run, lubricated, Spindle runout top accuracy, max. 3/100 mm Used Lrodpfx Aezvq E Hshkjr Manufacturer: Kölle Type: F 45 Machine No.: 889/E Motor: 4.7 / 5.7 kW Swiveling from -5° to +45° Motorized brake Speed stages: 3000/4000/5000/6000/8000/10,000 rpm Right-left rotation Table size: 1200 mm x 1000 mm Milling arbor diameter: 30 mm Milling stop with fine adjustment Socket for feed device: 1 x 16 A Extraction connection: D 2 x 120 mm Space requirement: approx. 1200 mm x 1000 mm x 1300 mm Weight: approx. 1000 kg Storage location: 97447 Gerolzhofen, free loading, unpacked Handover in the current condition as inspected, without warranty and guarantee

Condition: excellent (used), Number of spindles 5 St. Working width 230 mm Working height 120 mm Length of the planing table 2500 mm Feed motor 4 kW Feed speed 5-30 m/min. control Memory-Funktion Weinig Powermat 500 with grooved table ----- The machine arrives at the warehouse and is cleaned and fully inspected. Brief Summary: ----- - 5 Spindles - 8,000 rpm - Grooved table for short or difficult-to-guide workpieces, coated with Marathon PowerCoating - One driven roller in the outfeed table, hardened: 210 mm wide - Left and top spindles controlled for width and height - Quick-release spindle nut Detailed Description: ----- Technical Data: Working width: 20-230 mm Working height: 8-120 mm Number of spindles: 5 1st Spindle - bottom ----- Motor with brake: 7.5 kW Spindle diameter: 40 mm Speed: 8,000 rpm Tool circle: 125-180 mm Tool circle for rebate cutter: 130-160 mm Travel Axial: 17 mm Folding attachment MarathonCoatin for table insert in front of 1st lower tool holder 2nd Spindle - right ----- Motor with brake: 5.5 kW Spindle diameter: 40 mm Speed: 8,000 rpm Tool swing diameter: 93 - 200 mm Max. groove depth: 35 mm Axially travel: 80 mm Radial travel: Min. tool diameter at stop level: 93 mm Max. tool diameter behind stop level: 200 mm 3rd Spindle - left ----- Motor with brake: 7.5 kW Spindle diameter: 40 mm Speed: 8,000 rpm Tool swing diameter: 93 - 200 mm Tool swing diameter for straight cutter heads: max. 163 mm Max. Groove depth: 35 mm Axially travel: 55 mm Pressure shoe in front of left spindle, including 2 lateral pressure rollers, spring-loaded Spindle radially CNC-controlled 4th Spindle - top ----- Motor with brake: 11.0 kW Spindle diameter: 40 mm Speed: 8,000 rpm Tool swing diameter: 93 - 200 mm Maximum tool swing diameter for straight cutter heads: 180 mm Maximum groove depth: 35 mm Axially travel: 40 mm Spindle radially CNC-controlled Split pressure shoe in front of upper tool holder, adjustable to the tool swing diameter and pivoting away from the tool, spring-loaded. 5. Spindle - Lower ----- Motor with brake: 5.5 kW Spindle diameter: 40 mm Speed: 8,000 rpm Tool swing diameter: 93 - 225 mm Max. throat depth: 15 mm Axially travel: 35 mm Radial travel: Min. tool diameter to table level: 93 mm Max. tool diameter 6 mm below table level: 225 mm Feed system ----- Frequency-controlled feed, infinitely variable with brake: 4 kW, 5 - 30 m/min Infeed roller in front of the first lower tool, pneumatically controlled up/down. Durofer pointed tooth rollers with depth limiter and self-cleaning. Feed roller adjustment travel relative to the left tool holder, axial 35 mm Reduced roller spacing relative to the right tool Machine electrical system ----- Operating voltage 400 V (voltage range 380 - 420 V), 50 Hz. Machine stand, tables, and stops ----- Infeed table: 2500 mm long (including jointing guide) Lrjdpfjzughzex Ahksr Slotted guide for short or difficult-to-guide workpieces, coated...

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 0803078, spindle diameter: 40 mm, type of input current: three-phase, number of spindles: 4, For sale: Leadermac Linnerman 423c with four 40mm spindles, featuring a feed system controlled by a potentiometer. The maximum feed speed is 30 meters per minute. The control panel is mounted separately on a trolley. The equipment is disconnected from the power supply. Spindles: 4 shafts, diameter 40 mm. Feeding system: Variable feed speed controlled via a potentiometer. Ledpfxezvalpj Ahkorr Feed speed: Adjustable up to 30 m/min. Control panel: Separate control unit mounted on a mobile trolley.

Condition: excellent (used), Catalogue number 7340 TECHNICAL DATA - spindle diameter: 25mm - spindle working height: 120mm - exchangeable spindle - spindle locking - height adjustable up/down - original cast iron fence with full adjustment - 4 spindle speeds + right/left rotation - table dimensions: 1030x900mm - motor: 3.8kW - overall dimensions (L/W/H): 1030x1000x1080mm - weight: 614kg Lrodpsztznaofx Ahksr ADVANTAGES – manufactured in Poland – very good condition – used milling machine Net price: 6,900 PLN Net price: 1,640 EUR depending on the exchange rate of 4.2 EUR (Prices may fluctuate due to exchange rate changes)

Condition: excellent (used), Catalogue number 7882 TECHNICAL DATA - Spindle diameter: 30 mm - Spindle working height: 200 mm - Interchangeable spindle - Spindle lock - Height adjustable (up/down) - Cast iron fence with full adjustment - 3 spindle speeds + clockwise/counterclockwise rotation - Table dimensions: 1000 x 950 mm - Cast iron table - With side carriage: 1100 x 330 mm - Clamping device - Motor power: 3.7 kW - Brake Lredpfxjztqups Ahkor - Extraction port diameter: 120 mm - Dimensions (L/W/H): 1750 x 1400 x 1250 mm - Weight: 683 kg ADVANTAGES – German-made – With side carriage – Used spindle moulder – In very good condition Net price: 7,900 PLN Net price: 1,880 EUR (based on 4.2 exchange rate) (Prices may vary with significant exchange rate fluctuations)

Condition: used, Weinig U22N Lodpfx Aezhk T Ujhkjrr Number of spindles: 8 Spindle diameter: 40 mm Spindle arrangement: Bottom Right Left Right Top Bottom Top Universal

Condition: used, Weinig U17N Spindle arrangement Lrsdpfozhkwtsx Ahkor Bottom Right Left Right Top Bottom

Condition: used, Year of construction: 1981, Weinig U22N Number of spindles: 7 pcs Planing width: 220 mm Planing height: 120 mm Infeed table length: 2,500 mm Driven rollers in table: 2 pcs Rollers in table (not driven): 3 pcs Feed motor: 5.5 kW Counter bearing: spindles 6 and 7 Lodpfx Aox Da Rbohksrr Jointer: spindle 6 Spindle configuration Bottom 5.5 kW Right 3 kW Left 5.5 kW Right 7.5 kW Top 5.5 kW Top 4 kW Bottom 4 kW

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, WEINIG Powermat 700 Planing and Moulding Machine Year of manufacture: 2020 Tool configuration: 018 (b-r-l-t-t-b) 1st bottom spindle: 7.5 kW, 6,000 rpm 2nd right spindle: 15 kW, 8,000 rpm 3rd left spindle: driven together with right spindle, 8,000 rpm 4th top spindle: 11 kW, 8,000 rpm 5th top spindle: 7.5 kW, 8,000 rpm Lrsdoyh Rhwopfx Ahksr 6th bottom spindle: 7.5 kW, 8,000 rpm Feed motor: 5 kW Infinitely variable feed speed: 5 - 40 m/min Total connected load: 56.5 kW Equipment: - Comfort Set - Electronic digital readouts - Rebating unit - MarathonCoating table insert in front of first spindle - Quick-adjustable fence lip after right spindle - Pressure roller above, opposite right spindle, swing-away and spring-loaded - Reduced roller spacing opposite right spindle - Extension of pendulum axis opposite left spindle up to 150 mm - CNC control for dimension adjustment (thickness and width) - Split pressure shoes before 1st and 2nd top spindles - Frequency inverter for smoother motor start-up and stop - Pneumatically controlled feed roller before 1st bottom tool (raise/lower) - Climate control unit for control cabinet - Short infeed table, 1.20 m long, with 2 driven rollers above table and 1 driven roller in the table - MemoryPlus with 10.1-inch display

Condition: used, Year of construction: 1992, Table dimensions 1100 x 880 mm Motor output 7,5 kW Spindle diameter 30 mm reus 3000/4500/6000/9000 U/min Weight 650 kg Year 1992 Used Machine Year of manufacture: 1992 Features and technical specifications: - Universal table milling machine for machining wood, plastic, and light metals. - Interchangeable MK5 milling arbor, secured for left/right rotation - Special ball bearings for high-speed operation - Special ribbed table with quill and additional dust extraction under the table. - Locking mechanism for tool change in any spindle position - Digital height indicator with 1/10 mm resolution and zero setting (optional) - Maintenance-free and dust-protected bevel gear feed mechanism: 1 revolution = 1 mm, stroke 130 mm - Central lubrication of both bearings and the feed spindle - SFM 101 control panel - Speed displayed visually and automatically - With automatic brake - Extremely fast belt change with automatic speed display - Machine table dimensions: 1,100 × 880 mm - Working height (table): 900 mm - Motor power: 7.5 kW - Speeds (VBG 7 visual display): 3,000 / 4,500 / 6,000 / 9,000 rpm - Max. height adjustment of the milling spindle: 130 mm - Safety interlock for high speeds Lrjdszr Rq Ispfx Ahksr - Milling spindle taper: MK 5 - Milling spindle, interchangeable: Ø 30 mm - A-weighted sound pressure level at ear level: L(A) 75 dB - Connection diameter: 2x120 mm - Air velocity: 24 m/s - Air flow rate at table: 680 m³/h - Airflow rate at the router fence: 1,060 m³/h - Dimensions: approx. 140 x 100 x 175 cm - Weight: approx. 700 kg

Condition: excellent (used), CATALOG NUMBER: 6857 TECHNICAL DATA - Spindle diameter: 30mm - Spindle height: 140mm - Interchangeable spindle - Height adjustable (up/down) - Guide fence - 4 spindle speeds + right/left rotation: 3000, 4500, 6000, 9000 RPM - Table size with extension: 1970x990mm - Motor: 5.2kW - Extraction port diameter: 1x80mm, 1x120mm - Dimensions (L/W/H): 1920x1050x1130mm - Weight: 550kg ADVANTAGES – German manufacture – Used milling machine – Very good condition Net price: 11,900 PLN Lrjdpfjzr I Hgsx Ahksr Net price: 2,830 EUR Net price calculated at exchange rate 4.2 PLN/EUR (in case of major exchange rate fluctuations the price may change)

Condition: excellent (used), CATALOG NUMBER 7003 Technical Data: - Spindle diameter: 25mm - Spindle working height: 80mm - Interchangeable spindle - Spindle locking - Height adjustable (up/down) - Original cast iron fence - 2 speed options + right/left rotation - Table dimensions: 1000x800mm - Motor: 3kW - Dimensions (LxWxH): 1280x860x1100mm Ljdpszr I Epjfx Ahkerr - Weight: 465kg Features: – Bulgarian manufacture – Very good condition – Used milling machine Net price: 5,500 PLN Net price: 1,300 EUR (based on exchange rate of 4.2 PLN/EUR) (Prices may change due to fluctuations in the exchange rate)

Condition: good (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 119291, planing height: 160 mm, planing width: 260 mm, We are offering this well-maintained Weinig Powermat 600 planing and rabbeting machine, manufactured in 2014. Manufacturer: Weinig Model: Powermat 600 Year of manufacture: 2014 Condition: good Machine type: Planing and rabbeting machine Zuani/Kanefusa tools for molding, window and door frame production (original price EUR 18,000) are included. If you have any questions or require further information, please send us a message or call us. Ledpfx Ahszltp Teksrr

Year of construction: 1994, condition: ready for operation (used), There are two Spindle Moulder Casadei available. (1) Casadei FM5L, max. milling height: 100mm, motor power: 6kW, length: 2540mm, width: 1195mm, height: 1500mm, weight: approx. 950kg, year of construction: 1992, with table extension. (2) Casadei FM5C, motor power: 6.8kW, year of construction: 1994, with trolley. On-site inspection is possible. Lrsdpfx Aourwy Nohker

Condition: refurbished (used), Benier Beversal dough moulder weight range 50 -1200 grams Lodpfx Ahezudkaskjrr output max 1600 pc/h