Used Axis Measurement System With Hydraulic Lift To 4 for sale (65,063)

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, number of rollers: 4, roller (bottom) diameter: 460 mm, roller (top) diameter: 460 mm, side roll diameter: 380 mm, working width: 2,050 mm, sheet thickness (max.): 50 mm, sheet thickness steel (max.): 50 mm, power: 38.5 kW (52.35 HP), warranty duration: 12 months, STANDARD EQUIPMENT * The lower, upper and side rolls move up and down linearly via hydraulic cylinders attached to the body * Protected against overload * The upper roll and side rolls are driven by hydromotor and planetary gearbox (all 3 rolls are motor driven) * Three digital displays allow easy reading of roll positions * Hydraulic opening head and automatic lifting shaft enable easy removal of the bent workpiece * Easy operation with mobile control panel * Welded steel construction body * SAE 1050 (CK 50) induction hardened, forged or rolled steel shafts * Conical bending system * Centralized lubrication system * Hydraulic synchronization system for parallel movement of shafts (Ø280 -320 -350 -380 -400 -460) * Electronic synchronization system (Ø500-550-580-620-680) * Dual-speed operation system OPTIONAL EQUIPMENT * Automation with NC and CNC control * Top crane (elevator) for support in large diameter bending * Hydraulic side supports for large diameter bending * Hydraulic sheet removal system * Ground and polished rolls for special applications * Infinitely variable speed adjustment system * Electronic synchronization system for parallel movement of shafts (Ø280 -320 -350 -380 -400 -460) TECHNICAL SPECIFICATIONS Bending Length: 2050 mm Pre-bending: 35 / 40 mm Bending: 40 / 50 mm Upper & Lower Roll Diameter: 460 mm Side Roll Diameter: 380 mm Motor Power: 38.5 kW Bending Speed: 1.5 - 5 m/min Bodpfx Aoxd S T Uecysww Length: 4850 mm Width: 2300 mm Height: 2350 mm Weight: 19,800 kg

Condition: excellent (used), functionality: fully functional, Cutting length: 2520 mm Sheet thickness at 400N/mm²: 4.0 mm Strokes per minute: 47 Back gauge approx.: 750 mm Throat depth: 350 mm . Very good original condition! Bodpfjxd Dygex Acyoww . Equipment: Left side gauge, 750 mm Cutting gap adjustment Back gauge with vernier scale and magnifier (and light) Overload protection . Other: Both blades are sharp and have not yet been shimmed The cylinders are dry

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, load capacity: 6,000 kg, lifting height: 4,500 mm, free lift: 2,000 mm, load center: 600 mm, fuel type: gas, mast type: duplex, construction height: 3,350 mm, fork length: 1,500 mm, overall weight: 12,500 kg, empty load weight: 6,000 kg, total height: 3,350 mm, total length: 2,700 mm, total width: 2,850 mm, maximum load weight: 4,000 kg, fuel: liquid petroleum gas (LPG), Equipment: adjustable boom, cabin, lighting, pallet forks, We sell forklifts after a full service. Prepared for the end user. Ready to use. We can arrange transport within Europe and around the world. Bwodpfxjxiykfe Acyow

Condition: good (used), Deckel Maho 4-Axis CNC Milling Machine DMC 64 V linear Bsdpsxivy Nofx Acyjww Working area: - X-axis: 640 mm - Y-axis: 600 mm - Z-axis: 500 mm - Equipped with Heidenhain 520 control - Equipped with coolant system and paper filter - Probing system prepared, but probe is missing - Low operating hours - Machine from original owner - Used for single-part production of precision components - All 4 axes are operational; however, the encoder for the main spindle is defective Good condition, fully functional. Can be viewed and tested under power on site. Shipping also available internationally. Inspection: Please note that, to avoid misunderstandings, the item can be inspected and tested under power prior to purchase. Please ask any questions before buying to avoid uncertainties. For general inquiries or to arrange a viewing appointment, I am available at the phone number provided above or below at any time. Subject to prior sale and possible errors in the description. VAT will be shown separately on my invoices. Shipping by freight forwarding.

Condition: used, mileage: 519,853 km, power: 382 kW (519.37 HP), first registration: 10/2016, fuel type: diesel, tire size: 385/65R22.5, axle configuration: 6x2, wheelbase: 4,100 mm, fuel: diesel, brakes: retarder, color: black, gearing type: automatic, emission class: euro6, suspension: air, Year of construction: 2016, Equipment: ABS, air conditioning, cruise control, differential lock, parking heater, spoiler, traction control, = Additional options and equipment = - Adaptive cruise control - AdBlue system - Roof spoiler - Differential lock Bwodpfjxivrxsx Acyjw - Electric windows - Tipping hydraulics - Refrigerator - Lift axle - Air suspension - Microwave - Engine brake - PTO - Radio - Disc brakes - Heated seats - Sun visor - Spotlights - Lane departure warning system - Auxiliary heater - Central locking - Two separate beds = Remarks = Scania Torpedo R520 V8 6x2*4 / Lift steering axle. 410 cm wheelbase. Adjustable fifth wheel. Full air suspension. Retarder. Hydraulics. Leather seats. Heated and ventilated driver’s seat. Microwave. Fully covered chassis. V8 hose rack. Rear bumper with LED lights, Air horns. Alcoa Dura-Bright wheels. = Further information = Technical information Number of cylinders: 8 Drivetrain AdBlue system: Yes Axle configuration Brakes: Disc brakes Suspension: Air suspension Front axle: Tire size: 385/65R22.5; Steered; Tire tread left: 80%; Tire tread right: 80% Rear axle 1: Tire size: 315/70R22.5; Tire tread left: 70%; Tire tread right: 70% Rear axle 2: Tire size: 385/55R22.5; Steered; Tire tread left: 70%; Tire tread right: 70% Dimensions and weights Gross vehicle weight: 28,000 kg Dimensions (L x W): 772 x 255 cm Maintenance APK (Roadworthiness Inspection): valid until 09/2026 Financial information Price: On request Identification Type number: T520 6x2*4 TORPEDO / CONVENTIONAL / HAULER / LI = Company information = ALL PRICES ARE NET FOR EXPORT, Joris Versteijnen (NL-DE-EN) Wouter Greutink (NL-DE-EN-ES-IT) We speak Russian. We do our best to provide correct information, however, no rights can be derived from the texts provided.

Condition: used, New: No Bjdpfjxig Evex Acyoww Part suitable for: trucks Article nr.: S477999003-veiling Used Hydraulic valve

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, number of rollers: 4, roller (bottom) diameter: 280 mm, roller (top) diameter: 280 mm, side roll diameter: 220 mm, working width: 2,050 mm, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 20 mm, power: 16.5 kW (22.43 HP), warranty duration: 12 months, STANDARD EQUIPMENT * The top, lower, and side rolls move vertically via pistons hydraulically connected to the body. * Protected against overload. * The top and side rolls are driven by hydromotors and planetary gearboxes (all 3 rolls are motor-driven). * The positions of the rolls can be easily read from three digital displays. * The hydraulically opening head and the automatically rising shaft allow easy removal of the bent workpiece. * User-friendly operation with mobile control panel. * Welded steel construction body. * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts. * Conical bending system. * Centralized lubrication system. * Hydraulic synchronization system for parallel movement of the rolls (Ø280 -320 -350 -380 -400 -460). * Electronic synchronization system (Ø500-550-580-620 -680). * Dual speed operation system. OPTIONAL EQUIPMENT * Automation with NC and CNC control. * Top crane (elevator) for support during large diameter bending. * Hydraulic side supports for large diameter bending. * Hydraulic sheet ejection system. * Ground and polished rolls for special applications. * Stepless speed regulation system. * Electronic synchronization system for parallel movement of the rolls (Ø280 -320 -350 -380 -400 -460). TECHNICAL SPECIFICATIONS Bending Length: 2050 mm Pre-Bending: 12/16 mm Bending: 16/20 mm Top & Bottom Roll: 280 mm Side Roll: 220 mm Motor Power: 16.5 kW Bending Speed: 1.5 - 5 m/min Length: 4350 mm Width: 1700 mm Height: 1850 mm Weight: 8550 kg Bwsdjxd S Npopfx Acyew

Year of construction: 2008, condition: good (used), 4-axis workingcenter 4 pneumatic clamps with automatic positioning automatic toolchange with 8 toolholders Bjdpexhck Esfx Acysww usefull lenght 4000 mm Windows XP Embedded Software Camplus Software Shape remote control MG pilot

Condition: excellent (used), Year of construction: 2015, High-Performance Machining Center Spinner VC1200-HS / Siemens 840 SolutionLine Technology: In-line direct drive Spindle speed: 12,000 rpm Power: 28 kW Torque: 178 Nm Tool holder: SK 40 Bwsdpjxcwf Hsfx Acysw General: - Equipped with Siemens 840DE-SolutionLine control system and 15" color screen - Features graphical user interface for shop-floor programming (Siemens "Shop-Mill") and software version "Operate" - Milling spindle up to 12,000 rpm with in-line direct drive - Travels: X-1200 mm, Y-730 mm, Z-650 mm - Rapid traverse: 48 m/min - Tool taper size 40 according to DIN 69871-A, pull studs according to DIN 69872-A - Air blast unit for spindle taper - High-speed automatic tool changer (double-arm) for 32 tools Tool Magazine: - 32 magazine positions, double-arm tool changer - Clamping surface: 1,400 x 710 mm - Max. table load: 1,000 kg - Rapid traverse in X/Y/Z: 48 m/min - Linear guides in all 3 axes - Full enclosure with work area lighting - 4th axis with Siemens motor and direct measuring system (Heidenhain encoder) Further Equipment: - Chip disposal via scraper belt chip conveyor - Coolant supply with internal coolant system (IKZ), filter, 22 bar, and additional 350-liter tank - Direct path measuring systems in X/Y/Z (glass scales) - Workpiece measurement with touch probe, BLUM TC52 - Tool magazine: double-arm tool changer, 32 tools - Compressed air: connection at the spindle head - Control options: Siemens MyDynamics, milling package, 4 axes - 4th-axis rotary table MRNC-320N with Siemens motor and direct measuring system (Heidenhain encoder) - Tailstock NTTS-320, height-adjustable for rotary table

Condition: used, functionality: fully functional, Type: Hydraulic Guillotine Manufacturer: HJO, Sweden Year: 1984 Max. plate thickness 4 mm Bwedexgcz Ijpfx Acyow Max. plate length 2500 mm Max. operating pressure 21.0 MPa V 3 x 380 Hz 50 Weight 3700 kg Quick action blade clearance adjustment, floor pedal control.

Condition: used, Hydraulic Synchronizing Press, Spotting Press AGEO Type GHP 200 H6 4-Column Hydraulic Press, Tool Trial Press, Spotting Press Serial No. 21169 Year of manufacture: 1993 Pressing force: 200 tons Clearance between uprights (front): 1200 mm Upright opening (side): 650 mm Table surface: 1560 x 1010 mm Ram surface: 1560 x 1010 mm Ram stroke: 575 mm Draw cushion stroke: 300 mm Draw cushion holding force: 63 tons Draw cushion ejector force: 30 tons Max. installation height: 775 mm Table height above floor: 1000 mm Guide column Ø: 140 mm Clamping pin bore in ram: 64 mm Pressing speed: 0 to 10 mm/s, stepless Return speed: 0 to 20 mm/s, stepless Main motor power: 22 kW Control pump motor power: 5.5 kW Connection: 400 Volts, 50 Hz - Table and ram with 22 mm T-slots - Two pressure cylinders with electronic precision synchronization control - Stepless electronic stroke limitation (top and bottom with digital travel measurement and position display) - Mechanical safety support device (prevents ram from dropping due to dead weight) - Single-hand and two-hand operation - Electrical tool safety via signal contact - Pressure presetting independent of stroke (via keypad, digital pressure display) - Travel measurement system right and left via rotary encoders - Electrical control: MS-DOS PC with Ageo H v2.23 control software - Operator panel with swiveling display - Stroke movement and press force adjustable via joystick - Adjacent hydraulic power unit with electrical cabinet - Hydraulic draw cushion under the press table - Draw cushion with ejector function - Continuous stroke control - Floor-level installation - Electrical oil temperature monitoring - Operating manual with circuit diagrams Space required by press (upright) L x W x H: 1800 x 1010 x 3470 mm Bwjdpfx Ajwva I Hocyjw Space required for horizontal transport L x W x H: 3500 x 1800 x 1200 mm Net weight press: 13 tons Space for hydraulic power unit L x W x H: 1000 x 800 x 3040 mm Net weight hydraulic power unit: approx. 1 ton The machine was used as a tool trial press in a toolmaking workshop. Very good condition.

Condition: used, Year of construction: 2001, Technical data: Tool holder: SK 40 Travels: X-axis: 530 mm Y-axis: 450 mm Bwjdst Hr Ahopfx Acysw Z-axis: 450 mm Max. Tool weight: 260 kg Spindle speed: 12000 1/min Max. Table load: 380 kg Weight, approx.: 6500 kg Dimensions (DxWxH), approx.: 2000 x 2200 x 2400 mm Equipment: - Control Heidenhain TNC 430 - 4-axis from SMP (France)

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, number of rollers: 4, roller (bottom) diameter: 250 mm, roller (top) diameter: 250 mm, side roll diameter: 200 mm, working width: 1,550 mm, sheet thickness (max.): 15 mm, sheet thickness steel (max.): 15 mm, STANDARD EQUIPMENT Highly suitable for bending light and medium sheet metal, aluminum or stainless steel materials Ideal for bending materials into round and various diameters Bottom roll and side rolls move directly up and down hydraulically via linear movement Protected against overloading Top roll is driven by an electric motor and planetary gearbox. Bottom roll driven by cardan coupling system. Two rolls are drive rolls Roll positions can be easily read from three digital displays Hydraulically operated openable head allows easy removal of the bent workpiece Very easy to use with movable control panel Welded steel construction body SAE 1050 (CK 45) induction hardened forged or rolled steel shafts Conical bending system Hydraulic balancing system for parallel movement of the rolls Bwsdpfx Acoxd S Aieysw Complies with EU safety standards and CE marked Operation manual OPTIONAL EQUIPMENT Remote assistance with NC control Overhead crane (hoist) for supporting large diameter bending Hydraulic side supports for assisting with large diameter bending Ground and polished rolls Dual-speed adjustment system Stepless speed regulation Return rotation driven by hydromotor Ejector system TECHNICAL SPECIFICATIONS Bending Length: 1550 mm Pre-Bending: 10/12 mm Bending Thickness: 12/15 mm Top & Bottom Roll Diameter: 250 mm Side Roll Diameter: 200 mm Min. Bending Diameter: 375 / 1250 mm Motor Power: 7.5 + 1.5 kW Bending Speed: 5 m/min Tank Capacity: 40 L Length: 3500 mm Width: 1500 mm Height: 1370 mm Weight: 4650 kg

Condition: refurbished (used), Year of construction: 2018, functionality: fully functional, feed length X-axis: 350 mm, travel distance X-axis: 6,500 mm, rapid traverse Z-axis: 350 m/min, spindle speed (max.): 24,000 rpm, spindle speed (min.): 1,000 rpm, overall weight: 4,500 kg, working range: 6,500 mm, spindle motor power: 7 W, Headline Options: - Boost Your Production with the Refurbished NEXUS REV 8000 4-Axis CNC Machining Center! - Precision & Power: The Ultimate 4-Axis CNC Solution for Aluminum Doors & Windows - Maximize Efficiency: High-Speed, Double-Station CNC Machining Center Key Selling Points (Short & Punchy): - 4-Axis CNC Power: Machine complex profiles from the top and all angles (±90°) with incredible precision. - High-Speed Spindle: 7.5 kW spindle reaching 24,000 rpm for fast, clean cuts even on thick profiles. - Double-Station Design: Two independent 6.5-meter workstations for non-stop productivity—machine one profile while setting up the next. - Exceptional Accuracy: Advanced gantry system with dual servo motors ensures perfect alignment and vibration-free operation. - Smart Tool Management: 8-position automatic tool magazine handles tools from 1 mm up to 300 mm disc cutters. - Plug-and-Play Software: Included UNILINK CAD-CAM software streamlines operation from design (DXF) to finished part with automatic tool and clamp management. - Fully Refurbished & Guaranteed: Completely overhauled by NEXUS TECHNICA experts, backed by a 6-month warranty and full future support. Technical Highlights for the Ad: - Work Envelope (X, Y, Z): 6,500 mm x 350 mm x 350 mm (Double Station) - Spindle: 7.5 kW, 24,000 rpm - Control: Advanced CNC with movable terminal (PC, keyboard, mouse included) - Tool Magazine: 8 positions (handles large disc cutters) - Clamping: 10 manually positioned pneumatic clamps (automatic positioning optional) - Software: UNILINK 3D CAD-CAM software Bwedpfxexfqg Ns Acyjw - Condition: Professionally refurbished and modernized Ideal For: - Manufacturers of aluminum windows, doors, and sliding systems - Companies working with long aluminum profiles - Businesses aiming to automate and boost production capacity Call to Action: Ready to revolutionize your profile machining? Contact us today for more information and to arrange a viewing!

Condition: good (used), Year of construction: 2006, A Heidenhain iTNC530 system is installed. Axes: X 3000 mm, Y 900 mm, Z 900 mm Table: 3000 x 900 mm Bwodpfsxbzrnox Acysw Table load: 6000 kg Working speed: 3000 rpm Rapid traverse: 20000 mm/min Tools: 24 Motor: 22/27 kW Milling head – semi-automatic (see photo) Indexing range: A-2.5° B-2.5° The machine is not equipped with through-spindle coolant supply.

Condition: new, axle configuration: > 3 axles, first registration: 09/2025, loading space length: 8,900 mm, loading space width: 2,540 mm, suspension: air, tire size: 245/70-R17.5, Year of construction: 2025, = Additional Options and Accessories = - Fork sleeves = Notes = NEW and UNUSED MAXTRAILER MAX600-S-4-8.90-U 4-axle trailer with hydraulically operated and sliding ramps, loading platform 890 cm with rear incline, ABS/EBS, TPMS, BPW axles with drum brakes, air suspension with lift and lower valve, axle assembly with drawbar approx. 1,750 mm and 50 mm towing eye, coupling height 830–1,010 mm loaded, wide load signs, beacon, 6 pairs of sockets for stakes (approx. 100 x 50 mm), tyres 245/70-R17.5. = Further Information = Axle configuration Bwodpfx Acsxfbcbsyow Tyre size: 245/70-R17.5 Axle make: BPW DRUM Brakes: drum brakes Suspension: air suspension Front axle 1: twin tyres; Max. axle load: 10,700 kg; steered; Left tyre tread inside: 100%; Left tyre tread outside: 100%; Right tyre tread inside: 100%; Right tyre tread outside: 100% Front axle 2: twin tyres; Max. axle load: 10,700 kg; steered; Left tyre tread inside: 100%; Left tyre tread outside: 100%; Right tyre tread inside: 100%; Right tyre tread outside: 100% Rear axle 1: twin tyres; Max. axle load: 10,700 kg; Left tyre tread inside: 100%; Left tyre tread outside: 100%; Right tyre tread inside: 100%; Right tyre tread outside: 100% Rear axle 2: twin tyres; Max. axle load: 10,700 kg; Left tyre tread inside: 100%; Left tyre tread outside: 100%; Right tyre tread inside: 100%; Right tyre tread outside: 100% Dimensions Dimensions (L x W x H): 1,094 x 254 x 375 cm Weights Unladen weight: 8,464 kg Payload: 34,336 kg Gross vehicle weight: 42,800 kg Functionality Body make: MAXTRAILER MAX600-S-4-8.90-U Deck height: 90 cm Condition Overall condition: very good Technical condition: very good Visual condition: very good

Condition: used, 4-axis industrial robot, handling robot, SCARA robot, handling robot, loading robot, placer STÄUBLI type TS80 + CS8C bmn Bedpovmhphefx Acyoww Year of manufacture 10/2011 Serial no. F11/5JN5A1/A Year 2011 Number of axes 4 Handling weight (rated load) 2 kg Handling weight (maximum load) 8 kg Arm reach 800 mm Repeat accuracy (X+Y) 0.01 mm Repeat accuracy (Z) 0.004 mm Repeat accuracy (R) 0.002° Working range axis 1 +-280° Working range axis 2 +-310° Stroke axis 3 (Z-axis) 200 mm Rotation axis 4 (R-axis) +-500° Nominal speed / maximum speed: Axis 1 350 / 490 °/s Axis 2 500 / 620 °/s Axis 3 1600 / 2220 mm/s Axis 4 1200 / 1929 °/s Axes 1 + 2 8.11 / 10.84 m/s Robot configuration floor mounting Controller STÄUBLI CS8C bmn Serial no. F11/5JN5A1/C Rated voltage 1 x 230 VAC Rated frequency 50 - 60 Hz Connected load 1700 VA Dimensions of controller (W x H x D) 450 x 310 x 450 mm - Controller adjacent with removable "Teach in" operation - Material gripper, workpiece gripper HELLA / MADER Total weight 190 kg Transport footprint L x W x H 900 x 700 x 1500 mm Very good condition

Condition: good (used), Metal band saw, band saw machine, band saw, vertical band saw -Manufacturer: Jaespa, vertical band saw type AS 4 with hydraulic feed and saw band welding device -Cutting width: max. 385 mm -Cutting height: max. 265 mm -Engine power: 2.2 KW -Saw blade: length 3120 to 3320 mm Bsdpfx Aswu N E Eecyeww -Saw blade speed: continuously adjustable -Work table: with hydraulic feed, swiveling in 2 axes 15° / 45° -Band saw welding machine: Ideal BSO/16 -Dimensions: 1080/930/H2010 mm -Weight: 590 kg

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, number of rollers: 4, roller (bottom) diameter: 550 mm, roller (top) diameter: 550 mm, side roll diameter: 450 mm, roller length: 3,100 mm, sheet thickness (max.): 50 mm, sheet thickness steel (max.): 50 mm, power: 70 kW (95.17 HP), warranty duration: 12 months, Equipment: emergency stop, foot remote control, hardened rollers, swiveling upper roller, STANDARD EQUIPMENT * The bottom and side rolls move up and down linearly via hydraulic pistons attached to the frame * Protected against overloading * The top and side rolls are driven by hydromotors and planetary gearboxes (all 3 rolls are motor-driven) * Easy roll position reading via three digital indicators * Easy removal of bent parts thanks to hydraulically opening head and automatically lifting shaft * Very user-friendly operation with the mobile control panel * Welded steel construction frame * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts * Cone bending system * Centralized lubrication system * Hydraulic balancing system for parallel movement of rolls (Ø280 -320 -350 -380 -400 -460) * Electronic balancing system (Ø500-550-580-620-680) * Dual-speed operation system OPTIONAL EQUIPMENT * NC and CNC control for automation * Top crane (elevator) for support when bending large diameters * Hydraulic side supports for large diameter bending * Hydraulic sheet ejector system * Polished and ground rolls for special applications * Infinitely variable speed adjustment system * Electronic balancing system for parallel roll movement (Ø280 -320 -350 -380 -400 -460) TECHNICAL SPECIFICATIONS Bending Length : 3100 mm Pre-bending : 50/40 mm Bending : 40/35 mm Top & Bottom Roll : 550 mm Side Roll : 450 mm Bwodpfx Acjxbzptoyow Motor Power : 70 kW Bending Speed : 1 - 4 m/min Length : 6750 mm Width : 2900 mm Height : 2950 mm Weight : 47,000 kg

Condition: good (used), Year of construction: 2003, machine/vehicle number: 42058, Offer 20223 Technical data: - Operation via hand-held remote control with cable Bodpfx Aoxdivyecyoww - Load capacity: 1000 kg - Platform size: 1250 x 800 mm - Min. lift table height: 280 mm - Max. lift table height: 950 mm - Lift stroke: 670 mm - Hydraulic drive: 400 V / 1.1 kW - Required space: approx. W 1300 x D 900 x H min. 280 mm - Weight: approx. 150 kg - Mobile undercarriage

Condition: used, Year of construction: 2004, operating hours: 5,834 h, fuel type: diesel, Empty weight: 15.500 kg Lifting capacity: 1.000 kg Working height: 2.300 cm Serial number: 03104474 Front tyres / undercarriage remaining: 70 Rear tyres remaining : 70 Bwedpfx Acewbnmnsysw Tyre brand: - Transport dimensions (LxWxH): 5.75x2.5x3.2 Please contact PFEIFER GROUP for more information

Condition: used, High-lift pallet truck - pedestrian stacker, tiller stacker KENTRUCK Type Ergo-H Serial No. Year of manufacture: 2001 Bwodjxcbmnopfx Acyew Load capacity: 800 kg Lift height: 900 mm Fork length: 1170 mm Fork width: 70 mm Entry height at base of mast: 90 mm Overall fork width (outside): 570 mm Width between forks: 425 mm Distance between load rollers: 275 mm Lifting travel per pump stroke: 15 and 45 mm - Lift travel is manually switchable at the hand pump lever - Hand lever pump operates like a conventional pallet truck, lifting movement via the pull tiller - 2 steering wheels Ø 150 mm made of polyamide, 1 with parking brake, forced steering via the pull tiller - 2 fork rollers Ø 80 mm made of polyamide Dimensions (L x W x H): 1700 x 780 x 1370 mm Net weight: 150 kg Good condition

Condition: good (used), Year of construction: 2014, machine/vehicle number: 5890, Offer 25118 Technical specifications: - Tapping capacity approx. M 3 - M 8 - Working range (swivel radius) approx. 1800 mm - Multi-position head - Speeds 8 - 700 rpm - Quick-change tool holder size 1, diameter 19 mm - Pneumatic connection 6 - 8 bar - Table base H 900 mm - Space required approx. W 1000 x H 2000 x D 1000 mm Bodpfjwmnhpox Acyeww - Weight approx. 100 kg

Condition: used, Year of construction: 2008, operating hours: 3,374 h, fuel type: diesel, Empty weight: 24.680 kg Lifting capacity: 1.000 kg Working height: 2.830 cm Bwjdpfjwfccxex Acyjw Serial number: 1200018435 Front tyres / undercarriage remaining: 40 Rear tyres remaining : 40 Tyre brand: - Transport dimensions (LxWxH): 7.15x2.5x4.2 Please contact PFEIFER GROUP for more information

Condition: good (used), Year of construction: 2019, machine/vehicle number: 6284, Offer 24033 Technical data: - Tapping capacity M 3 - M 24 - Working range (swivel radius) 1800 mm - Infinitely variable speed adjustment up to 475 rpm - Digital depth adjustment Bodpfsrt Unwjx Acyeww - Torque 140 Nm - Quick-change tool holder size 2 diam.31 - various inserts for quick-change tool holder - Table surface 1200 x 990 mm - Table height 830 mm - Space requirement approx. W 1250 x H 2000 x D 1000 mm - Weight approx. 300 kg