Used Axis Card for sale (11,092)

Condition: used, machine/vehicle number: 008112, X axis working area: 3390 mm Y axis working area: 1535 mm Working Table: Pod and Rail Bdjdpfxow Idgve Adred Main Electrospindle power: 15 KW Number of controlled axes: 5 axes Total number of drilling spindles: 21 Total number of tool changer positions: 14

Condition: used, Year of construction: 2013, power: 17.1 kW (23.25 HP), input voltage: 400 V, input current: 29 A, input frequency: 50 Hz, travel distance X-axis: 4,320 mm, travel distance Y-axis: 1,326 mm, travel distance Z-axis: 170 mm, number of axes: 5, number of slots in tool magazine: 33, Equipment: CE marking, Biesse Rover A 1343 CNC machining centre 5-Axis Description Rover A ATS CNC Machining Centers Working ranges X = 4,320 mm; Y = 1. 326 mm;Z = 170 mm Chip and scrap conveyor belt Automatic lubrication system Remote console Safety systems in compliance with the requirements of Directive 2006/42/EC Vacuum system for 1 vacuum pump of 250 m3/h or 300 m3/h 1 x 250 m3/h vacuum pump for standard system Auxiliary vacuum system for double working area machine Multi-zone 8 floors and 24 trolleys Bedpfx Aey U Naiedrsdd 8 ATS L = 1280 mm decks - 24 carriages - with automatic positioning (ATS-EPS X-Y) 8 reference stops with 115 mm rear stroke 8 front reference stops with 140 mm stroke positioned at a height of 1190 mm from the rear stops 4 side stops, with 140 mm stroke (2 right + 2 left) with implant 2 additional side stops, with 140 mm stroke (1 right + 1 left) Pneumatic system for double-stroke bar lifts 6 pneumatic double stroke load aid bar lifts for uniclamp vises H=74 for workpieces up to 98 mm thick Vacuum module size 132 x 146 x H74 mm Vacuum module size 132 x 75 x H74 mm with predisposition for pins Uniclamp vice with 2 movements with quick coupling and circular plate - H=74mm For clamping workpieces with a thickness from 40 to 98 mm 8 reference stops with 140 mm stroke positioned at a height of 670 mm from the rear stops Uniclamp vice with 2 movements with quick coupling and circular plate - H=74mmFor clamping workpieces with a thickness from 83 to 140 mm Flange for the preparation of a 5 Interpolating Axis Operating Unit for the assembly of Aggregates *The aggregates can only be used with the Electrospindle in a vertical position *Requires the 5 Interpolating Axis Operating Unit Predisposition for deflectors with inductive or pneumatic sensor on 5-axis operating unit Coolant control unit to replace the heat exchanger supplied with 13kW 5-axis units. Operating unit 5 interpolating axes 13 kW (17.4 Hp), HSK F63 connection, liquid-cooled. Includes the heat exchanger for cooling the coolant with operating temperatures between + 5° and +40° Right deflector with pneumatic sensor for 11 kW 5-axis electrospindle Upgrade from BiesseWorks Basic Machine to BiesseWorks Advanced Machine Iron fork for deflectors with inductive or pneumatic sensor Chain tool magazine with 33 places - centre distance 120 mm Flexible front unit protection for loading unlimited Y-size (Despite our great care all changes, mistakes in technical data, prices and all information is subject to (typing) errors. No guarantee on printed data! Availability subject to prior sales). (Trotz größter Sorgfalt bleiben Änderungen, Irrtümer bei technischen Daten, Preisen und allen Angaben (Tipp-)Fehler vorbehalten. Keine Gewähr auf gedruckte Daten! Verfügbarkeit vorbehaltlich Zwischenverkauf). Prices excl. advertisement cost MachineSeeker / Preise exkl. Inserierungskosten MaschinenSucher Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: used, Year of construction: 2012, operating hours: 35,000 h, machine/vehicle number: MU44-16201032ELCS, Travel ranges (X/Y/Z): 800/700/510 mm, with NC rotary table, max. spindle speed: 12,000 rpm, 48-tool changer, WinMax control system, chip conveyor, coolant system. Bdsdpfx Aszha Eyodrod

Condition: used, Year of construction: 2019, operating hours: 2,117 h, machine/vehicle number: 20190908, Travel ranges (X/Y/Z): 1 mm, table size: 1,200 x 600 mm, spindle speed: 12,000 rpm, 40-position tool changer, tool holder SK 40, control system HEIDENHAIN TNC 640, machine weight: 7,800 kg, 3D measuring head, chip conveyor, paper band filter system, chip container. Bjdjzha E Tepfx Adrodd

Condition: used, Year of construction: 2019, operating hours: 16,785 h, machine/vehicle number: 20200108, Travel ranges (X/Y/Z): 650/750/500 mm, max. spindle speed: 18,000 rpm, with NC rotary table, 60-position tool changer, tool holder HSK63A, control system HEIDENHAIN TNC 640, chip conveyor, band filter system, cooling system, machine weight: 13,000 kg. Bdedpfx Adezha Hdjrod

Condition: used, Year of construction: 2010, operating hours: 38,353 h, machine/vehicle number: MC54G-16201060AKA, Travel ranges (X/Y/Z): 3,200/2,100/920 mm, max. spindle speed: 6,000 rpm, tool holder: SK50, chip conveyor, control system: HURCO Winmax, 40-position tool changer, cooling unit: HABOR, coolant: R407C. Bodpfx Aozha Etodredd

Condition: used, Year of construction: 2019, operating hours: 14,857 h, machine/vehicle number: 150015, Travel ranges (X/Y/Z): 1,500 x 750 x 900 mm, 38-position tool changer, SK40, weight: 8,720 kg, control system: HEIDENHAIN TNC 640, 1 chip conveyor, 1 set of SK40 tool holders, approx. 60 pieces, on a transport cart. Bjdpfxszha Afe Adrodd

Condition: used, Year of construction: 2015, operating hours: 17,260 h, functionality: fully functional, machine/vehicle number: 1121106, rotational speed (max.): 15,000 rpm, spindle nose: BT40, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Haas 750SS 5 Axis Milling Machine Machine built 2015 and has been well maintained. Only making Aluminium components. Manufacturing parts for the motorcycle market. 5-axis machining is an effective means to reduce setups and increase accuracy for multi-sided and complex parts. The Haas UMC Series universal machining centres are cost-effective solutions for 3+2 machining and simultaneous 5-axis machining. The UMC-750SS has an integrated high-speed, dual-axis trunnion table with a 500 mm diameter platter that features standard T-slots and a precision pilot bore for fixturing versatility. The trunnion provides +120 and -35 degrees of tilt and 360 degrees of rotation to provide excellent tool clearance and large part capacity. • 5-axis simultaneous machining • Powerful inline direct-drive spindle • High-speed trunnion table • Thru spindle coolant, bed wash and flood coolant Bjdpfx Adozic Tporjdd • Swarf Conveyor BT40 Spindle with spindle speed up to 15,000 rpm 39 Tool carousel, with pre select. Tool probe and Tool Setting function The machine is still in daily use, the hours will increase as a result. Viewing by prior arrangement. Buyer to arrange collection at their own expense. Price is £50,000 plus Vat where applicable. Sold Ex Works

Condition: new, Year of construction: 2021, machine/vehicle number: 218, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, travel distance X-axis: 5,500 mm, travel distance Y-axis: 2,800 mm, travel distance Z-axis: 1,000 mm, controller manufacturer: OSAI, total height: 8,100 mm, total length: 5,100 mm, total width: 3,400 mm, controller model: OPENkey, spindle motor power: 7,400 W, number of spindles: 4, rapid traverse Z-axis: 38 m/min, rapid traverse X-axis: 90 m/min, rapid traverse Y-axis: 54 m/min, spindle speed (max.): 24,000 rpm, spindle speed (min.): 3,000 rpm, Equipment: CE marking, documentation/manual, We've lowered the price!!! NEW PRICE ONLY 99,000 EURO!!! This price is valid until 30/08/2026! Don't miss this opportunity! We invite you to purchase a NEW and outstanding 5-AXIS MACHINING CENTER from the renowned company FANUM. We offer the new SIGMA model, which is exceptionally well-equipped. The machine is brand new, and the attached specification details its functions, parameters, and production capabilities. FANUM has been known for many years for its reliability, precision, high power, and fast working speed. The MACHINING CENTER we offer is BRAND NEW. It was purchased from FANUM Sp. z o.o. in 2021 and delivered to our premises by the manufacturer. The FANUM Sp. z o.o. service team only commissioned the machine, and it has not been used since. Its condition can be considered completely NEW. Our model is exceptionally well-equipped and has practically everything you might need. Currently, a new device costs around EUR 282,350 net, which is PLN 1,200,000 net. We have direct contact with and support from the manufacturer, FANUM Sp. z o.o. Another start-up inspection and demonstration can be arranged at our location. Of course, it is also possible to transport the device to the new owner and have the FANUM machine installed and started up at their site. The price we propose includes the device itself, although we can also offer a quote with installation and commissioning at the new location. In our opinion, the discount we offer, over 40% (more than EUR 117,640 net, about PLN 500,000 net) off the value of a new machine, makes this an extremely attractive price for anyone currently looking for a similar device for their machine park, or who did not expect, within their established budget for a MACHINING CENTER, to be able to purchase a modern, new, and exceptionally efficient machine. Bsdpfx Adoyn Rpweredd General remarks regarding the sales offer: • Although the machine is NEW, it was manufactured in 2021, and we do not offer any guarantee or warranty; • The device cannot be returned; • The price in the advertisement does not include VAT (23% for buyers in Poland), which will be added to the invoice—please check how the price is stated in the ad; • Single owner. * Price in EUR calculated based on the NBP exchange rate – 1 EUR = 4.25 PLN. Welcome to all users of the MACHINESEEKER platform. We are new users of MACHINESEEKER. We are not a furniture, manufacturing, or machine trading company. We own numerous properties in Poland and are a developer building houses and apartments in Warsaw (the capital of Poland). The machines listed in the offer are our property. We acquired them in settlements with our tenants from the furniture industry. We know their history and condition, which is consistent with our descriptions. We are in contact with the machine manufacturers, who can provide additional support – Homag, Otto Martin, OMC Machinery, and FANUM. Since we do not need these machines, our prices are very attractive, especially since the machines are practically new. We can assist with transportation anywhere in Poland or the EU. You are welcome to inspect the machines before purchase. Best regards.

Condition: used, machine/vehicle number: 008167, X axis working area: 6000 mm Y axis working area: 1750 mm Working Table: Pod and Rail Main Electrospindle power: 12 KW Number of controlled axes: 5 axes Total number of drilling spindles: 30 Total number of tool changer positions: 72 Bdodpfjx A Hczsx Adrsd

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: T40065, MACHINE SPECIFICATION Maximum swing 510mm Maximum turned diameter 290mm Maximum turning length 540mm Bed inclination 60 degrees Spindle centre height (from floor) 960mm Spindle nose A2-6 Power chucking system Hydraulic Spindle bore 77.5mm Bar capacity - collet 66mm Maximum spindle speed 5000rpm Spindle motor power 22kW Rapid travers : Z/X Axis 30/25m/min Turret: Tooling type VDI 40 Number of tooling stations 12 Number of driven tool stations 6 Maximum rpm of driven tool 4000rpm Maximum power of driven tool 3.7kW Maximum collet size of driven tool 20mm C axis increment: Fully programmable 0.001 degrees Approximate net weight 4550Kg Machine Equipped with Fanuc 21i-T CNC Control System Hydraulic 3 jaw chuck Bedpfx Adoq Atxysrjdd 3 off Radial driven toolholders 3 off Axial driven toolholders 30 off Static toolholders Coolant system Lighting Interlocked guarding  

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 172822052, SPECIFICATION Trunnion table size 600mm diameter X axis traverse 600mm Y axis traverse 600mm Z axis traverse 500mm A axis tilt +120 deg/-120deg C axis rotation 360 degree Maximum table load 600Kg Spindle BT 40 Maximum spindle speed 15,000rpm Spindle motor 22.4kW Maximum spindle torque 239Nm at 1100rpm Spindle motor 35kW Rapid feed rate X,Y,Z axis 36m/min Rapid feed rate C axis 540 degrees a second (90 rpm Rapid feed rate A axis 99 degrees a second (16.6rpm) Toolchanger capacity 32 tools Approx. weight 9500kg   MACHINE EQUIPPED WITH:- Siemens 840DSL CNC control system with Shop Mill Through spindle coolant, 20 bar Bsdpfx Ajt Dmlfedredd Swarf Conveyor Laser toolsetting Traori-this function keeps the tool in an optimised cutting position relative to the workpiece when 5 axis simultaneous machining Networking Lighting Enclosed Guarding

Condition: good (used), Year of construction: 1998, travel distance X-axis: 1,020 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 510 mm, total length: 1,150 mm, total width: 510 mm, 3-axis CNC machine (VMC) Matsuura - MC-1000 VG X - Travel: 1020mm Y - Travel: 550mm Z - Travel: 510mm Table Length: 1150mm Table Width: 510mm Feed rate X-Axis:15000mm/min. Feed rate Y-Axis:15000mm/min. Feed rate Z-Axis:15000mm/min. Spindle Taper: 40ISO/Bt/Mk Power on spindle:30kW Speeds / ranges:15000Rpm Bsdpfxjwvhvfe Adredd ATC / revolver: 30 Chip conveyor: yes Length: 2800mm Width: 2500mm Height: 2800mm Weight: 6800kg

Condition: used, Year of construction: 2022, controller manufacturer: Heidenhain, controller model: TNC 640, _____ Description: Year of manuf. : 2022 Control : Heidenhain TNC 640 Speed : 10000 rpm Movement X/Y/Z : 1000/600/600 mm Tool holder : SK40 Spindle: Technology:Belt drive Speed:10,000 rpm Tool holder:SK40 Media feed-through:Blown air + cooling lubricant Working table: Clamping surface:1,200 x 600 mm Tableloading (max.):750 kg General: Tool magazine:40 stations Features/Accessories: Coolant Management:IKZ system with filter and high pressure, 20 bar Chip Management:Chip conveyor Workpiece Measurement:25.50-HDR Tool Measurement:Pick UP wireless 35.40 TS Position Measurement System:Heidenhain linear measurement system (direct) X/Y/Z Bdodpfx Aezg Shqjdrjd Setup Mode:Electronic handwheel

Condition: like new (used), Year of construction: 2023, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 940 mm, travel distance Z-axis: 500 mm, controller manufacturer: FANUC, spindle speed (max.): 8,000 rpm, coolant supply: 40 bar, spindle nose: HSK80, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, VIGEL TW 500H Bi.Z 2-Spindle 5-Axis CNC Machining Center · Year 2023 Overview Bsdpfx Adszh Svqersdd High-productivity, twin-spindle, 5-axis CNC machining center designed for serial production of complex, precision components. Linear drives on the linear axes and direct-drive torque motors on the rotary axes provide high dynamics and consistent repeatability, with a positioning accuracy of 8 µm. Two synchronized HSK 80 spindles, spaced at 500 mm, machine two parts simultaneously – each served by its own 30-tool magazine – making this platform particularly well-suited for medium- and high-volume production in the aerospace, automotive, and precision component industries. Technical Specifications MACHINE IDENTIFICATION Manufacturer: VIGEL Model: TW 500H Bi.Z Type: 2-Spindle 5-Axis CNC Machining Center Year of Manufacture: 2023 CONTROL & DRIVES CNC Control: Fanuc i-Series Number of Axes: 5 Machine Drive: Linear drives Rotary Axes: Direct-drive torque motors Positioning Accuracy: 8 µm WORKING ENVELOPE X-axis travel: 500 mm Y-axis travel: 940 mm (600 mm working area + 340 mm for tool change) Z-axis travel: 500 mm Distance between spindles: 500 mm SPINDLES & TOOLING Number of Spindles: 2 (twin-spindle, synchronized) Tool Interface: HSK 80 Tool Magazine: 30 tools per spindle Max Tool Dimensions: L 360 mm × Ø 199 mm, max 6 kg/tool Spindle Speed: 8,000 RPM AUXILIARY EQUIPMENT Coolant Chiller: Included Coolant Filtration: KNOLL Mist Filtration: Yes Chip Conveyor: Included PHYSICAL DATA Machine Weight: ≈ 19 t

Condition: ready for operation (used), Year of construction: 2008, - USED - 5-AXIS BRIDGE-TYPE VERTICAL MACHINING CENTRE     Bedpfxowl R Dde Adrsdd X-AXIS TRAVEL: 1750 mm Y-AXIS TRAVEL: 1400 mm Z-AXIS TRAVEL: 600 mm RAPID FEEDS X-Y-Z: 35 m/min SPINDLE: 18000 rpm; 18,5-25 kW; HSK A63 TABLE SIZE: 1000 x 1200 mm MAX ADMITTED LOAD: 5000 Kg TOOL MAGAZINE: A CATENA ; 30 POS HEAD: A/B AXIS AUTOMATIC CONTROL UNIT: HEIDENHAIN iTNC 530 WEIGHT: 18000 Kg OVERALL DIMENSIONS: 6000 x 4000 x 3850 mm ACCESSORIES: SWARF CONVEYOR ; LASER TOOL SETTER ; PORTABLE HANDWHEEL

Condition: excellent (used), Techman Type: Techman Robot TM5-900 The TM5-900 is equipped with an integrated image analysis system, which gives it the ability to “see”, allowing it to handle assembly automation and inspection tasks with maximum flexibility. It works in collaboration with humans and shares the same tasks, without compromising productivity or safety. It offers the highest level of precision and efficiency while operating in the same workspace. The TM5-900 is the ideal cobot for the electronics, automotive, and food industries. Payload: 4 kg Reach: 946 mm Weight: 22.6 kg Perfect for Industry 4.0 Highest flexibility and adaptability Extremely low costs for automation and maintenance The TM5-900 is a genuine plug & play solution. Connect a monitor, mouse, and keyboard to the control unit, and the TM5-900 will be ready for use in just a few steps. Scope of delivery: Techman Robot TM5-900 Control unit, connection cable Operating device 2 calibration plates for the camera system 1 landmark Condition: used Scope of delivery: (See picture) Bedpfx Adjzg Eyaoredd (Changes and errors in the technical data and specifications are subject to change!) We would be happy to answer any further questions you may have over the phone.

Condition: excellent (used), Year of construction: 2020, Traverses XYZ: 610 x 406 x 406mm, 400mm Diameter table, max table weight 226kg, table tilt +120°, -35°, 22.4kW, 10000rpm, Bdsdpfx Aezg Enqjdrsd BT40, 30 station tool changer, coolant, swarf conveyor

Condition: excellent (used), Year of construction: 2002, 5-axis CNC machining center 2006 Control: Heidenhain iTNC 530 Technical data: Bdjdpfx Ajwn A Slsdred x-axis travel 880 mm y-axis travel 630 mm z-axis travel 630 mm Max. torque 130 Nm tool holder SK 40 (ISO 7388IIB) swiveling B: 103° Work table: Clamping surface 1,250 x 700 mm Rotary table diameter 700 mm rotatable C: 360 ° Max. table load approx. 500 kg T-slots 11x 14mm x 63mm Tool magazine: Number of tool places 32 (2x 16) pos. tool holder SK 40 (ISO 7388IIB) Max. tool diameter 80 / 130 mm Max. tool diameter with free neighbor box 160 mm Max. tool length 315 mm Max. tool weight 8.0 kg

Condition: used, machine/vehicle number: 008414, X axis working area: 3140 mm Y axis working area: 1500 mm Working Table: Pod and Rail Main Electrospindle power: 13 KW Bdodpsywafhefx Adrjd Number of controlled axes: 5 axes Total number of tool changer positions: 13

Condition: used, machine/vehicle number: 008272, Position 1: 5 Axis CNC Routers BIESSE + KUKA-ROVER A + KR210 R3100 Bodpfx Adex A Tfvsrodd Position 2: Robot BIESSE + KUKA-ROVER A + KR210 R3100

Condition: used, Year of construction: 2021, operating hours: 3,032 h, functionality: fully functional, machine/vehicle number: ENFPMV620C3, travel distance X-axis: 700 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 48 m/min, rapid traverse Y-axis: 48 m/min, rapid traverse Z-axis: 48 m/min, controller manufacturer: Fanuc, controller model: Fanuc 31i Model B, total height: 3,038 mm, total length: 4,475 mm, total width: 3,580 mm, rotational speed (max.): 12,000 rpm, spindle speed (max.): 12,000 rpm, number of spindles: 1, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, For sale is a state-of-the-art and fully functional 5-axis CNC machining center from Victor, model Vcenter AX630. The absolute highlight of this system is the directly connected robotic automation Cellro Xcelerate X20. The robot arm handles the fully automatic part change, making this machine ideal for low-manned or completely unmanned series production (lights-out manufacturing). The machine has only run for approximately 3032 hours, is in excellent condition, and is ready for immediate use. Accessories & Extras: We will provide the buyer with a basic set of tool holders with the machine! Additional, extensive accessories (various additional tool holders and high-quality clamping systems) are available and can be included upon request. Bdjdpszh Na Tjfx Adrod Condition & Inspection: The machine is located in Switzerland, is still connected to power, and can be inspected after prior arrangement (including a test run). Dismantling, loading, and transport will be arranged and must be organized by the buyer. The machine is still in use, so the operating hours may increase.

Condition: new, Year of construction: 2025, Ref. -No.: 10461 Manufacturer: IGREK Type: DT 4000 Year of construction: 2025 Type of control: CNC-Steuerung Control: SIEMENS SINUMERIK 840D SL Storage location: Istanbul Country of origin: Türkiye Spindle Speeds: 4000 RPM Turning Height: 2000 mm Table Diameter: 4000 mm Spindle power: 37 kW Max. Table load: 40 t Rotate table rotation speed: 60 RPM Max. Turning diameter: 5000 mm Max. Turning height over faceplate: 2000 mm Max Spindle Torque: 1200 Nm Spindle Taper: ISO 50 Machine length: 7500 mm Machine width: 12000 mm Machine Height: 9500 mm Weight Of The Machine Ca.: 125 t Further information: Ram Slide Stroke: 2100 mm Ram Section: 350 x 350 mm Vertical Travel of the Moving Traverse: 2000 mm Table Drive System: Segmented Direct Drive Motors Table Torque: 8200 Nm - 14400 Nm max. Table Guide System: Hydrostatic Bearing and Guides IGREK DT 4000 – Your solution for precise heavy-duty machining The IGREK DT 4000 is a state-of-the-art CNC vertical turning center designed specifically for the precise machining of large components. Equipped with a 4,000 mm hydrostatic rotary table and a movable crossbeam, it enables the efficient machining of workpieces with a maximum turning diameter of 5,000 mm and a turning height of up to 2,000 mm. Key features: Bedpfx Adjxmd Sueredd Hydrostatic rotary table: The 4,000 mm rotary table with hydrostatic bearing ensures maximum precision and smooth running when machining heavy workpieces. Movable crossbeam: The vertically movable crossbeam with a stroke of 2,000 mm offers flexibility and allows adaptation to different workpiece heights. Powerful spindle: With a spindle speed of up to 4,000 rpm and a power of 37 kW, the machine is designed for demanding machining tasks. High load capacity: The rotary table can accommodate workpieces weighing up to 40 tons, enabling the machining of large and heavy components. Multifunctional machining: Thanks to the live spindle and the precise positioning of the C-axis, milling and drilling operations are possible in addition to turning, which increases the versatility of the machine. The IGREK DT 4000 combines advanced technology with high performance and flexibility to meet the requirements of modern manufacturing processes. Its robust construction and wide range of machining options make it the ideal solution for the precise machining of large components in various industries.

Condition: used, Year of construction: 1997, machine/vehicle number: 11730, CNC control HEIDENHAIN, travel: X-axis 800 mm x Y-axis 600 mm x Z-axis 500 mm, swiveling range A-axis +20/-90 degrees, C-axis 360 degrees, max. spindle speed 18,000 rpm, automatic tool changer with 30 tool positions, rapid traverse 35 m/min, machine weight 7,000 kg, chip conveyor. Bdodpfx Ajy Sqgledrsd

Condition: good (used), Year of construction: 2005, functionality: fully functional, Robot Demag W710 axis) (Wittmann) Number of axis: 3 X- 600 mm Y- 800 mm Bdjdpfx Adexp Nu Torod Z- 1500 mm