Used Axis Card for sale (11,111)

Condition: new, Allen Bradley 2198-S086-ERS4 Kinetix 5700 Single Axis Safe Speed Drive SN: 96490792, unused in original packaging, 100% fully functional, scope of delivery as per photos. Bwjdpfx Ajx Eqr Ujdrsp

Condition: used, Keba central processing unit Bjdpfx Aorr Ehxedrswp - removed from Engel ES 500/150 HL - removed from running machine - fully functional manufacturer: Keba type: CU 211/A spare part no.: 22 manufacturer no.: 21876 Dition: gebraucht

Condition: used, B&R 2005 CP152 / 10010792 / CP152.9 - compatible with all B&R 2005 controls - housing intact or renewed - removed from running machine - fully functional manufacturer: B&R type: B&R 2005 Bwsdpeimw Suofx Adrep spare part no.: 10010792 manufacturer no.: CP152.9 Dition: gebraucht

Condition: used, Sigmatek DIAS wire plate version 2- compatible with NC4 control - removed from Demag ET 6 system Bwedpfx Adjrr Egzerjp - removed from running machine - fully functionalmanufacturer: Sigmatek spare part no.: manufacturer no.: Dition: gebraucht

Condition: used, Keba analogue measurement + control module AR101- overhauled - 3 months warranty - removed from running machine - fully functionalmanufacturer: Keba type: AR101 Bsdpfx Adew Ah Rpsrjwp manufacturer no.: 220405 spare part no.: 2203 64293 months warranty: This is provided exclusively by a manufacturer's inspection. The processing is carried out by Complast GmbH.

Condition: used, B&R Provit Controller 5C2001- removed from K-Tec 200-1000S Bwsdpfxjp Rb Hcs Adrjp - removed from running machine - fully functionalIf the spare part is traded in exchange, a partial credit note will be issued after receipt of the defective part and inspection by the manufacturer. We reserve the right to refuse a credit note due to the condition or age of the returned part. The defective part must be in a repairable condition, the credit note will be issued after feedback from the ufacturer: B&R spare part no.: 1 manufacturer no.: 5C2001.16 Dition: gebraucht

Condition: used, B&R Provit controller 5C2001- removed from Battenfeld BA 6 CDC - removed from running machine Bsdpeiyzv Sefx Adrewp - fully functionalmanufacturer: B&R manufacturer no.: 5C2001.18 spare part no.: BR177 If the spare part is traded in as an exchange, a partial credit note will be issued after receipt of the defective part and inspection by the manufacturer. We reserve the right to refuse a credit note due to the condition or age of the returned part. The defective part must be in a repairable condition, the credit note will be issued after feedback from the manufacturer. Dition: gebraucht

Condition: used, Sigmatek IPC Pentium 300CF- removed from Krauss Maffei KM 18 C3 - removed out of running machine - fully functionalmanufacturer: Sigmatek type: 300CF spare part number: 5 Bedpeltrptsfx Adrswp Dition: gebraucht

Condition: used, B&R 2005 CPU260 interface processor- housing intact or renewed - compatible with all B&R 2005 controllers - removed from K-Tech 200 Bjdpfx Adjp Rb E Rorewp - removed from running machine - fully functionalIf the spare part is traded in exchange, a partial credit note will be issued after receipt of the defective part and inspection by the manufacturer. We reserve the right to refuse a credit note due to the condition or age of the returned part. The defective part must be in a repairable condition, the credit note will be issued after feedback from the ufacturer: B&R type: B&R 2005 manufacturer no.: 3CP26 spare part no.: 10079382 Dition: gebraucht

Condition: used, B&R 2005 CPU module CP152- removed from Ferromatik E50 - removed from running machine Bwjdpfxeyxg Tuj Adrep - housing renewed - compatible with all B&R 2005 controls - fully functionalManufacturer: B&R type: CP152 spare part no.: 1676890710, 10010792 manufacturer No.: 3CP152.9

Condition: used, B&R 2005 NC150 counter module - housing renewed - compatible with all B&R 2005 controls - removed from Ferromatik E50 - removed from running machine - fully functional manufacturer: B&R type: B&R 2005 sparepart no.: 11124276 Bwsdpfoyxg Tnox Adrop manufacturer no.: 3NC150.6

Condition: used, Keba analog module AM 450/A Kemro K2-400 – suitable for Engel CC200 control Bjdpfjw Ah N Sex Adrswp - removed from an operational machine - fully functional Manufacturer: Keba Type: AM 450/A Kemro K2-400 Manufacturer No.: 054202

Condition: used, B&R 2010 DO430 digital output Bwsdpfx Asw Ah Nxedrop - housing renewed - compatible with all B&R 2010 controls - removed from running machine - removed from Ferromatik MV 200-970 - fully functional manufacturer: Ferromatik Milacron type: B&R 2010 sparepart no.: 10010690 manufacturer no.: 2DO430.6

Condition: used, Keba input card DI 470/A Kemro K2-400- suitable for Engel CC200 control unit Bwjdpfx Adow Ah N Ejrsp - removed from running machine - fully functionalmanufacturer: Keba type: DI 470/A Kemro K2-400 manufacturer no.: 054943

Condition: used, B&R Provit Controller 5C5001- removed from Ferromatik MV 200-970 3F - removed from running machine - fully functionalmanufacturer: B&R Bwodpew Ah Nrjfx Adrep manufacturer no.: 5C5001.11 spare part no.: 10131261If the spare part is traded in as an exchange, a partial credit note will be issued after receipt of the defective part and inspection by the manufacturer. We reserve the right to refuse a credit note due to the condition or age of the returned part. The defective part must be in a repairable condition, the credit note will be issued after feedback from the manufacturer.

Condition: used, Keba input card DI 470/A Kemro K2-400- suitable for Engel CC200 control unit - removed from running machine - fully functionalmanufacturer: Keba Bwedpsw Ah Nlofx Adrsp type: DI 470/A Kemro K2-400 manufacturer no.: 054943

Condition: used, Keba temperature card TM 450/A Kemro K2-400- suitable for Engel CC200 control unit - removed from running machine - fully functionalmanufacturer: Keba type: TM 450/A Kemro K2-400 manufacturer no.: 054492 Bodpfsw Ah Nfsx Adrswp

Condition: used, Sigmatek DEZ 181 / DIAS VDMA interface- compatible with NC4 control - removed from Demag ET 6 system - removed from running machine - fully functionalmanufacturer: Sigmatek Bwjdpferr Efkjx Adrop type: DEZ181 spare part no.: manufacturer no.: D Dition: gebraucht

Condition: good (used), Year of construction: 2005, Hurco - VMX30 - 3-Axis Machining Center Year of build 2005 Serial number H-30516 Travel x-axis 760mm Travel y-axis 510mm Travel z-axis 510mm T-slot fixture table size W 510mm T-slot fixture table size L 1510mm Engine power (kW) 11kW Machine weight 4800kg Bwodpfxju A Dnpo Adrsp

Condition: used, Year of construction: 2011, Technical details: x-travel: 800 mm y-travel: 950 mm z-travel: 1020 mm Bodpfsyzza Isx Adrowp control: Sinumerik 840D sl MDynamics Operate turning speeds: 10.000 1/min Spindle power: 26/20 kW max. torque on the spindle: 340/262 Nm tool taper: HSK-A 100 tool change unit: 120 (2x60) Pos. Pallet changer 2x: 630 x 630 mm table load capacity: 800 kg weight of the machine ca.: 20 t dimensions of the machine ca.: 3,3 x 6,15 x 3,2 m 6-axis simultaneous horizontal machining center with controlled swivel-rotary table (A/B-axis), Swivel table can swing overhead (180°), that means the part is hanging down overhead and chips don’t accumulate on pallet, they can fall free into the chip conveyor CNC controlled U-axis enables radial movement of tool for variable spindling diamenter. twin pallet changer 630 x 630 mm 6 hydraulic couplings for pallet fixture clamping with rotary joint in A and B-axis special hydraulic pump for fixture coolant through spindle (10-80bar), one channel with proportional valve for pressures 10-200 bar, electromech. tool-length measuring device GROB, BLUM laser for tool measuring, tool coding, chip conveyor, 3D touch probe M&H, el. handwheel Siemens HT8 coolant gun, coolant shower, air gun, oilskimmer, automatic door Remote diagnosis A 6th axis MAPAL Tooltronic U-axis system comes with the machine with two heads: 1. LAT125-HSK100 2. LAT160-HSK100 *

Condition: used, Year of construction: 2014, total height: 2,800 mm, total length: 10,300 mm, total width: 2,450 mm, Colour: Grey Empty weight: 6.600 kg Price: On request Bedpfxoytcl Ij Adrewp - Year: 2014 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: AA2/002546 - Number of milling spindles [pcs.]: 1 - └ Milling spindle 1: - - Number of controlled axes [pcs.]: 5 - - Max. spindle speed [rpm]: 24000 - - Main motor power [kW]: 11 - Type milling table: Beam table - Tool clamping system: HSK-F63 - Material clamp system: Pneumatic - Drilling unit present: Yes - └ Motor power [kW]: 3 - └ Horizontal drill spindles [pcs.]: 6 - └ Vertical drilling spindles [pcs.]: 10 - Tool changer positions [pcs.]: 24 - System/software: Xilog plus - Safety feature: Safety light curtain, Door interlock switches, Enclosed fence - Vacuum pump present: Yes - └ Number [pcs.]: 1 - └ Brand: Becker - └ Type: Vtlf 250 - └ Year of manufacture: 2008 - └ Main motor power [kW]: 5.5 - └ Connection diameter [mm]: 70 - └ Oil free: Yes - Tools included: Yes - CNC options: Offcut conveyor, Manual control - CNC documentation available: USB stick - Table length [mm]: 5200 - Table width [mm]: 1300 - Voltage [V]: 400 - Current consumption [A]: 64 - Transport dimensions: 10300mm x 2450mm x 2800mm (l x w x h) - Transport weight [kg]: 6600kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: used, Year of construction: 2018, operating hours: 10,347 h, total height: 2,400 mm, total length: 7,000 mm, total width: 2,400 mm, Colour: Grey Empty weight: 3.450 kg Bedpfxsxtbgpj Adrewp - Year: 2018 - Documentation available: Yes - CE marking present: Yes - CE certificate present: Yes - Operating hours: 10347 - Number of milling spindles [pcs.]: 1 - └ Milling spindle 1: - - Number of controlled axes [pcs.]: 5 - Type milling table: Beam table - Drilling unit present: Yes - └ Horizontal drill spindles [pcs.]: 10 - └ Vertical drilling spindles [pcs.]: 24 - Saw unit present: Yes - Tool changer positions [pcs.]: 25 - Vacuum pump present: Yes - └ Number [pcs.]: 1 - └ Brand: Becker - Working range X [mm]: 3110 - Working range Y [mm]: 1320 - Z-axis working range [mm]: 180 - Transport dimensions: 7000mm x 2400mm x 2400mm (l x w x h) - Transport weight [kg]: 3450kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Year of construction: 2022, condition: excellent (used), 5-axis Machining center independent clamp movement 16 positions tool magazine chip conveyor belt (horizontal) 2° chip conveyor belt (vertical) tool lenght probe 10 toolholders HSK 63 UPS 11 kW spindle with liquid cooling 5 axis blade diam 450 mm automatic greasing kit extra blade unit 90° on moveable carriage wireless bor code reader Bedpfeu A Uq Ijx Adrjwp

Condition: used, Year of construction: 2001, controller manufacturer: Heidenhain, controller model: MillPlus, _____ Description: Bsdpfxezbzchj Adrswp Year of manuf. : 2001 Control : Heidenhain MillPlus Speed : 18000 rpm Movement X/Y/Z : 630/560/560 mm Tool holder : SK 40 Spindle: Technology:Motorspindle Speed:18.000 rpm Power (max.):35 kW Torque (max.):119 Nm Taper:SK40 Workingtable: Clamping surface:1.000 x 600 mm Tableloading (max.):400 kg In general: Toolmagazine:2x 10 stations Rapid travers in X/Y/Z:26/26/20 m/min Equipment/Accessory: Chipmanagement:Chiptrumpet Coolingmanagement:Cooling unit Oilmistseparation:Mechanical extraction, Hör AFS 1100 4.-Axis:Magerl Rotomatik 120 with Counterbearing Processobservation:Operation mode 4 Setup operations:Electronical handwheel Further Equipment:Spindlechiller, Rinsing pistol Further Accessory:Misc. used Toolholder SK 40

Condition: used, Year of construction: 1999, controller manufacturer: Heidenhain, controller model: MillPlus, _____ Description: Year of manuf. : 1999 Control : Heidenhain MillPlus Speed : 12000 rpm Movement X/Y/Z : 800/650/550 mm Spindle: Bwedpfx Adezbzcborep Technology:Motorspindle Speed:12.000 rpm Power (max.):15 kW Torque (max.):130 Nm Taper:SK40 Workingtable: Clamping surface:1.100 x 650 mm Tableloading (max.):600 kg In general: Toolmagazine:25 stations Rapid travers in X/Y/Z:18/18/15 m/min Equipment/Accessory: Chipmanagement:Chip tray Coolingmanagement:Coolant pump Oilmistseparation:Electrostatic extraction, W+W EL-FI 1000 Further Equipment:Rinsing pistol Further Accessory:Misc. used Toolholder SK 40