Used Autoclave for sale (116)

Condition: used, This listing is for an Eppendorf BioFlo 320 Glass Vessel Bioreactor 5L SS Dished Bottom M1379-1001 The unit is in full working condition and is ready for immediate release Key Features Material: Autoclavable borosilicate glass vessel with a stainless steel headplate. Bottom Design: Dished stainless steel bottom for rapid heat transfer. Drive Options: Compatible with both magnetic and direct overhead drive systems. Impeller Options: Supports various impellers including Rushton, pitched blade, marine blade, spin filter, cell lift, and packed-bed impellers. Port Configuration: Multiple industry-standard headplate ports for flexibility in process design. Temperature Control: Suitable for both rapid and gentle temperature control processes.​ Applications This bioreactor is ideal for applications such as:​ Cell culture and microbiology research. Laboratory and pilot-scale fermentation of aerobic and anaerobic bacteria, yeasts, and fungi. Cultivation of mammalian, insect, and human cell lines. Specialized applications like stem cell culture or biofuel/biopolymer development. Packed-bed impeller use for vaccine production in anchorage and non-anchorage dependent cell lines. Suitable for batch, fed-batch, and continuous processes. Giodpfx Ajxv D Ihegbol Validation packages available for GMP-regulated processes

Condition: ready for operation (used), Features: Maximum speed 15,000 rpm (depending on rotor) Minimum speed 300 rpm Maximum RCF 21,885 x g (microliter rotor) Giodpfxsxqq R Ss Agbel Temperature set range -9°C to +40°C Run time Standard mode: 1 min - 9 h 59 min, hold = permanent Extended mode: 1 min - 99 h, hold Power rating 120V, 60Hz, 12A Power consumption 1220W Dimensions (W x D x H) 29 x 26 x 14.5 in Weight ~288 lb (~130 kg) Comes with a Heraeus Autoclavable rotor, on the pictures. Good working condition. Please check out our other listings as well.

Condition: used, Year of construction: 1990, functionality: fully functional, total height: 11,000 mm, total width: 4,800 mm, tank capacity: 166,500 l, TECHNICAL SPECIFICATIONS - Flat bottom tank - Brand: CSC - Material: stainless steel - Capacity: 166,500 litres - Interior finish: 2B - Exterior finish: Brushed ROOF - Lifting rings - 1 central chimney with 500 mm stainless steel hatch with clamping arm Gjdpfexnwnfjx Agbsil - 1 safety valve RING - 1 DN70 filling pipe with valve - 1 oval stainless steel autoclave door 310×420 mm - 1 DN70 stainless steel ball drain valve with sludge trap - 1 level gauge BOTTOM - Flat - 1 DN70 stainless steel butterfly drain valve - 1 DN50 stainless steel butterfly drain valve with decanter elbow - 6 fixing brackets for base plate DIMENSIONS - Diameter: 4800 mm - Height: 11000 mm

Condition: used, Stainless Steel Food-Grade Storage Tank – 100 m³ (304L) – BSL Manufacturer BSL Type Horizontal stainless steel storage tank, large capacity, food-grade design. Industrial Applications - Storage of food-grade liquids (water, juices, wine, syrups, oils, dairy products) - Beverage and food processing industry - Buffer tank for production lines - Light chemical or pharmaceutical storage compatible with food standards Main Technical Specifications - Capacity: 100,000 liters (100 m³ / 1,000 hectoliters) - Material: Stainless steel 304L (food-grade) - Dimensions: Gjdpsx A It Usfx Agboil - Diameter: 3.00 m - Height: 3.70 m - Overall length: 15.00 m - Top fittings: - DN 500 dome - Vent - DN 80 filling connection - Bottom fittings: - Autoclave door - DN 80 drain with ball valve - Level gauge - DN 80 decantation drain with valve - Compliance: Food-grade certified - Location: Saint-Gilles (30800), France - Transport: Loading and exceptional transport available nationwide - Condition: Second-hand, very good condition - Availability: Immediate Machine Usage The BSL 100 m³ stainless steel tank is designed for large-volume storage of food-grade or non-corrosive industrial liquids, ideal for beverage processing, water treatment, and bulk storage operations. Features / Differentiators - Built by BSL, a reference in industrial stainless steel manufacturing. - Horizontal construction ensures high stability and easy maintenance. - Equipped with multiple fittings for filling, draining, and level control. - Full 304L stainless steel structure for complete food compatibility. - Large 100 m³ capacity suitable for centralized storage applications. - Optional loading and exceptional transport service available on demand.

Condition: used, functionality: fully functional, Autoclaves are used for the sterilization of packaged products that must reach high temperatures (+100ºC) for the elimination or inactivation of pathogenic microorganisms. Continuous autoclaves: These are integrated within production lines. Containers enter the autoclave automatically and exit at the other end already sterilized. This enables much higher production volumes. - FMC-JBT rotary cooker-coolers: These consist of two or more bodies in which each sterilization phase is carried out. Gisdpfxewxwzps Agbsl Measurements: Module 1: 9 m x 2 m x 2.30 m. Module 2: 9 m x 1.55 m x 2.30 m. Module 3: 13 m x 2.10 m x 2.30 m.

Year of construction: 2012, operating hours: 75 h, condition: like new (used), This Vötsch Hephaistos Industrial Microwave Chamber has had extremely low hours usage during its life so far, on 75 hours .. having been installed and minimally utilized from time to time for a single research project at the University of Sheffield AMRC research department known as the “Factory of the Future”. Sold new for a price of approx 250,000.00Euro. Contact us now for an exceptional offer for this high tech unit in as new condition. VHM Hephaistos Industrial Microwave Chamber For Aerospace and Automotive Engineering The Research Project The VHM Hephaistos Industrial Microwave Chamber for component testing was developed in cooperation with the Karlsruhe Institute of Technology (KIT). It is the result of a joint development project sponsored by the German Federal Ministry of Education and Research (BMBF). Alongside KIT, the Composite Research Center of EADS in Munich, the Institute for Aircraft Design (IFB) at the University of Stuttgart, GNK Aerospace in Munich and Vötsch Industrietechnik were involved in the project. Microwave system The VHM Hephaistos Industrial Microwave Chamber from Vötschtechnik is an internationally patented system. Fast and energy-efficient production processes are possible by using microwaves. The microwave chamber is characterized by its hexagonal geometry with a very high field homogeneity. This is a major advantage when thermoforming fibre composites (CFRPs) in the aerospace and automotive industries. During the targeted volumetric heating of the products, the microwaves directly enter the material so that energy is delivered directly and the chamber does not require heating. This increases the heating rate and throughput, saving energy and time in addition. Reduced production costs This industrial microwave chamber guarantees you reduced costs due to shorter heating, process and cooling times required for curing CFRP components. Its material processing technology means the microwave can produce energy input into the component to be heated while the oven itself remains cold. In comparison to the process in autoclaves, the processing times are reduced by up to 50 %. Energy consumptions is reduced by up to 70%. Advantages: Gijdpfx Aotvz Rfogbjl Possibility to use metal parts, such as conventional metal tools and feed systems, in the microwave field High degree of product quality thanks to the maximum homogeneity of the microwave fields provided by the hexagonal chamber structure. By using microwave absorbing materials, additional positive effects can be achieved Sizes from laboratory scale to large systems, e.g. as are required in the aerospace industry, can be achieved The modular design allows a flexible adjustment to your product Volumetric and selective heating for energy-efficient processes Precise heating of the products Hybrid systems, e.g. in combination with hot air

Condition: used, This listing is for the Gilson Pipetman L P10mLL 1-10ml The unit is in full working condition and is ready for immediate use Godpfsxv Drtjx Agbjil The Gilson Pipetman L P10mLL is a precision liquid handling instrument designed for laboratories requiring reliable and ergonomic pipetting in the 1–10 mL volume range. Ideal for both routine and high-precision applications, this pipette features advanced design enhancements for improved comfort, control, and durability. Key Features: Adjustable Volume Range: 1–10 mL for a wide variety of applications Plastic Tip Ejector: Corrosion-resistant, ideal for working with harsh or volatile chemicals Ergonomic Design: Lightweight and balanced to reduce fatigue during extended use Volume Locking System: Prevents accidental volume changes during pipetting Fully Autoclavable: Ensures sterility and easy decontamination 2D Identification Code: Laser-marked DataMatrix for traceability and inventory management Exceptional Accuracy and Precision: Built to meet ISO 8655 standards Applications: Cell culture and media preparation Buffer and reagent transfers Clinical, research, and industrial laboratorie

Condition: refurbished (used), functionality: fully functional, !!! The unit has been calibrated for temperature and CO2. O2 sensor faulty but can be replaced !!! Temperature Control Range: ambient + 3 °C to 55 °C Gsdpfx Agoxbcwfebjil Temperature Deviation (time/spatial): ± 0.1 °C / ± 0.5 °C Ambient Temperature Range: 18 °C to 33 °C CO₂ Measure & Control Range: TC (thermal conductivity) sensor, 0 to 20% CO₂ Control Accuracy: ± 0.1 Humidity (constant): ≥ 95% rH Humidity Fill Amount / Water Quality: maximum 3 (units), distilled or autoclaved water Dimensions (W × H × D): 25.1 × 34.1 × 30.2 in (~ 63.7 × 86.6 × 76.8 cm) Total Volume: 5.4 cubic feet (150 L) Weight: 165 lb (~ 75 kg)

Condition: used, functionality: fully functional, usable tank capacity: 10,200 l, total height: 4,200 mm, inner diameter: 2,000 mm, TECHNICAL SPECIFICATIONS - Conical bottom tank on legs - Brand: RURALINOX - Material: stainless steel - Capacity: 10,200 litres RING - 1 ladder support bar - 1 lifting tube - 1 door bar - 1 oval autoclave door - 1 tasting tap - 1 support and level tap BOTTOM - Conical Giodpfx Agjw Tl T Isbel - 1 total drain valve on square flange - 4 stainless steel legs with plates DIMENSIONS - Diameter: 2000 mm - Height: 4200 mm

Year of construction: 2016, condition: ready for operation (used), A complete soup production line including can filling, sealing, and washing processes is available. 1) Steam boiler Loos, year of manufacture: 1990, max. operating pressure: 6bar, steam generation: 1250kg/h. Including gas burner Weishaupt, year of manufacture: 1990, max. power: 1730kW, adjustable pressure range: 5mbar-140mbar. 2) Autoclave Lubeca. Including 20 cooking trolleys and various intermediate racks. 3) Can washing machine W. Busser 521-1, year of manufacture: 1984. Including conveyor belt. 4) Can filling and sealing machine. Including conveyor belt. 5) Inkjet printer Linx 8900, year of manufacture: 2019. 6) Basket washing machine Hobart FUX-SAF, year of manufacture: 1990. 7) 2x cooking kettles A.S.T.A. Steiner, max. operating overpressure vessel/double jacket: 0bar/1bar, max. operating temperature vessel/double jacket: 100°C/119°C, volume vessel/double jacket: 300L/20L. 8) Can labeling system. An on-site inspection is possible. This is a complete system with conveying technology and peripheral equipment. Individual or partial sale of the units is possible upon agreement. Gjdpfx Agsxliurjbjil

Condition: ready for operation (used), Plant Liquidation – Complete Equipment for Tire Retreading For sale is a comprehensive production line for tire retreading, ideally suited for businesses specializing in tire renewal. ⸻ Machinery & Equipment • Buffing/Rasping Machine: Tread and casing preparation (roughening and buffing) • Repair/Skiving Station: Grinding and patching • Extruder/Filling Unit: Cushion gum processing • Cementing/Adhesive Station • Building/Banding Station: For precured tread application • Envelope/Vacuum Station: Envelope and sealing operations • Autoclave including accessories (tire rings, vacuum pump, pipelines, carts) Additional Workstations: • Casing Spreader / Inspection stand • Pressure & Leak Test Station • Final Inspection (Tread and Sidewall Check) Plant & Auxiliary Equipment: • Compressors (Kaeser & Atlas Copco brands) • Extraction and dust removal system at grinding stations • Tire and material carts, shelving units • Tool and small parts set (valves, gaskets, clamps) • Transport and cooling racks • Various vulcanization and operating accessories Documentation: Photos, parts list, and additional documents available on request ⸻ Condition & Delivery • Used, fully operational • Inspection possible at any time • Accessories available • Dismantling, loading, and shipment easily arranged • Shipping via freight forwarder possible ⸻ Contact Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg 📞 All prices net, plus 19% VAT. Subject to change and errors excepted. Giedpfxjxk Tuaj Agbjl

Condition: used, Year of construction: 2006, functionality: fully functional, Lisec laminating line with Scholz autoclave and Kaeser compressor. The line is disassembled but fully functional. The photos show both the period when it was operational and the current situation with the disassembled components. Giodow Tyk Ispfx Agbsl

Condition: used, This listing is for the Gilson PIPETMAN P1000 100-1000uL Single Channel Pipette with Metal Ejector The unit is in full working condition and is ready for immediate use Key Features & Specifications Volume Range: Fully adjustable from 100 to 1000 µL — ideal for a wide range of liquid handling needs Precision & Accuracy: Systematic (bias): at 100 µL ±3 µL, at 500 µL ±4 µL, at 1000 µL ±8 µL Random (precision): ≤0.6 µL at 100 µL, ≤1 µL at 500 µL, 1.5 µL at 1000 µL Construction: Built with durable PVDF and stainless steel components — trusted for reliability, robustness, and long lifespan Ergonomics: Designed for comfortable use with reduced pipetting forces to minimize hand fatigue during prolonged sessions Maintenance: Easy to dismantle with an autoclavable tip holder and ejector, ensuring convenient cleaning and decontamination Gijdsxv Dtdspfx Agbjl Metal Tip Ejector: Durable metal ejector reduces tip ejection force and enhances longevity

Condition: new, functionality: fully functional, Mettler Toledo Rainin Quickflow 4l Aspirator. Rainin QuickFlow Portable Aspirator. Ergonomic handle; 3 adapters fit Pasteur pipette, 1 or 8 universal-fit pipette tips. 4-liter bottle; quick-snap connectors, tubing. Variable speed. Non-contact liquid level sensor. Autoclavable, fits inside hood. Improved ergonomics: Switching to continuous mode on the QuickFlow handle eliminates the need to repeatedly press and hold the aspiration button. Guaranteed safety: The robust non-contact liquid level sensor prevents overflow. Simple, self-sealing snap connectors keep any contamination inside the bottle. Workflow flexibility: Single channel, 8-channel and glass Pasteur pipette adapters. From flasks to plates to tubes, QuickFlow adapts to your applications. Good working condition. Please check out our other listings as well. Godpfx Aoua Hatjgbeil

Condition: used, functionality: fully functional, total height: 5,100 mm, total width: 2,800 mm, pressure: 1 bar, tank capacity: 19,800 l, inner diameter: 2,800 mm, TECHNICAL SPECIFICATIONS - Vertical cylindrical tank - Capacity: 9,400 l + 10,400 l = 19,800 litres - Material: stainless steel ROOF - 1 off-centre chimney at the front with hatch RING - 1 complete level tube for each of the two compartments - 1 oval autoclave door for each of the two compartments - 1 tasting tap on each of the two compartments - 1 rectangular door on the upper compartment - 2 partial drain valves on each of the two compartments - 1 cooling circuit on each of the two compartments Gisdpoxz A Htofx Agbjl BOTTOM - Conical - 4 feet - 1 total drain valve DIMENSIONS - Diameter: 2800 mm - Overall height: 5100 mm

Condition: used, No. 3213 Thermal treatment system / vacuum dryer WTT Used, year of construction 2017 Thermal treatment system / thermal chamber for the modification of wood The WTT thermal chamber is a system for the thermal modification of wood. It enables efficient treatment of 2 to 3 batches per day, depending on the thickness and type of wood. The system has a powerful energy and heat transfer system and works with a gas or oil-fired boiler system that uses thermal oil as a heat transfer medium. Technical data: Capacity: 5950 - 9900 m³ of wood per year (for 330 working days) Usable volume: 9 m³ (with 50 mm wood thickness) Stack dimensions: 10500 x 1300 x 1100 mm LWH Minimum board thickness: 10 mm Power connection: 3 x 400 V, 50 Hz + zero + earth, 63 A Specific power consumption: 15.9 kW/m³ Maximum heat output: 2 MW (230 °C - 250 °C thermal oil) Heat consumption: 120 kWh/m³ wood Autoclave length: 11,000 mm Autoclave diameter: 1,800 mm Autoclave material: 10 mm stainless steel duplex EN 4462 Door opens hydraulically, with 1.5 kW drive Working pressure: 0.1 to 15 bar (absolute) Working temperature: 0 °C to 220 °C 200 mm glass wool insulation, clad with 1 mm galvanized sheet steel Main components: 1. autoclave, in which the heat treatment takes place 2. vacuum system that sucks the air out of the autoclave before heat is applied 3. energy center with a 2 MW oil burner 4. 4 MW cooling system with dry coolers 5. nitrogen generator 6. gas cooler system Heating and cooling system: Heat exchanger: 8 units (4 on each side) Material: Stainless steel pipes (seawater resistant) Total floor area: 165 m² Cooling water consumption: 1000 l/batch (not contaminated, only heated) Control and operation: Control system: WTT ExoT (fully automatic) 22” color monitor, IBM computer, printer Sensors: 4 PT100 temperature sensors 2 mechanical thermometers 1 vacuum/pressure transmitter 1 mechanical vacuum/pressure gauge Special equipment: Hydraulic rail bridge for convenient transportation of wooden trolleys Automatic trolley extraction with cable winch (1.5 kW) 2 MW thermal oil boiler (heating) Fuel oil tank (4000 l) with measuring system Insulated 20 foot steel container for heating module Giodpfxjv Si Szj Agbsl Stainless steel safety chimney (300 mm diameter, 6000 mm length) Functional description: 1. filling the autoclave with wood 2. creating a pre-vacuum 3. filling with gas 4. heating 5. modifying 6. cooling 7. pressure equalization 8. creating a post-vacuum / drying 9. pressure equalization 10. emptying Certified EC Pressure Equipment Directive (PED) 97/23/EF Construction EN 13445 Sale on behalf of customer, from location near 5020 Salzburg (Austria), without dismantling, transportation and assembly Dismantling, loading and transportation by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Year of construction: 2019, condition: ready for operation (used), Used for autoclave sterilisation, an on-site inspection is possible. Giodpfx Aeq Rfl Nogbel

Condition: used, This listing is for a Thermo Scientific High capacity Dryer A82100126 Digital controller facilitates accurate and constant temperature control from 40° to 90°C. Polished stainless steel drying chamber includes an autoclavable drip tray. Includes air intake with removable filters and easy-to-clean epoxy-coated external finish. Gisdpfexzht Sex Agbel Listing: Thermo Scientific High Capacity Dryer A82100126 Quantity: 1.0

Condition: used, functionality: fully functional, tank capacity: 29,800 l, total height: 5,000 mm, inner diameter: 3,100 mm, TECHNICAL SPECIFICATIONS - Conical bottom tank on legs - Material: stainless steel - Capacity: 29,800 litres RING - 1 ladder support bar - 1 lifting tube - 1 support and level tap Gedpfxjw Tl R Tj Agbeil - 1 door bar - 1 oval autoclave door - 1 partial drain valve on square flange BOTTOM - Conical - 1 total drain valve on square flange - Stainless steel legs with plate DIMENSIONS - Diameter: 3100 mm - Height: 5000 mm

Condition: new, No. 3187 Vacuum dryer / drying chamber ISVE ES 5 / NEW New machine, delivery time 120 days Construction features: AISI-304 stainless steel, partially insulated External diameter: 1600 mm Length of cylindrical part: 5000 mm Dryer length: 5900 mm Dryer total length plus sliding guides: 11000 mm Max. operating vacuum: -730 mm Hg Timber pile length: 5000 mm Timber pile width: 1100 mm Timber pile height: 990 mm Net wood volume: approx. 5 m3 Installed electrical power: 16,01 kW Average hourly power input: 8 kW/h Includes: - 12 electric heating plates (each 1100 x 5000 x 10 mm LWH / 57 kg / 1,25 kW) - 2 internal condensers (turbofan of 0,55 kW each 380 VCa with stainless steel pipes) - 1 one-way valve (clapet: one ¾” for vacuum circuit) - 1 solenoid air return valve (24 Vca: one 1” for the autoclave) - 1 manual air return (1” ball valve) - 1 electrical control panel (PLC type Siemens S7-1200, with touch panel) - 1 ISVE server connect with remote service and control - 2 wireless moisture probes (double probes for core and surface moisture reading) - 1 wireless temperature probe (for wood core reading) - 2 plates-holder stands - 1 instruction booklet (in English with CE certificate and wiring diagrams) Transport dimensions approx. 5900 x 1620 x 2300 mm LWH Weight approx. 2900 kg Technical details, year of construction and scope of delivery according to the manufacturer, without guarantee Subject to prior sale New machines are covered by the manufacturer's warranty Images and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex location Gisdpfx Ajvc Axpogbsl

Condition: used, This listing is for the Avestin EmulsiFlex-C5 for homogenizer with sealed toolings and spares The unit is in full working condition and is ready for immediate use EmulsiFlex-C5 High Pressure Homogenizer The Avestin EmulsiFlex-C5 is a high-pressure, pneumatically powered homogenizer designed for laboratory-scale applications. It is ideal for processing small to medium sample volumes, from 7 mL up to 5 L/h, depending on the pressure applied. How It Works: High Pressure Homogenisation High pressure homogenisation is an efficient and easy-to-use technique for cell disruption and liposome/emulsion processing. The principle involves pumping the sample through a valve with a small aperture. The sample transitions from very high pressure (up to 30,000 psi) on the pump side to atmospheric pressure on the outlet side. This sudden drop in pressure creates intense shear forces, disrupting cell membranes or dramatically reducing liposome/emulsion sizes. For cells, the pressure-induced shear forces rupture the membranes, effectively lysing the cells. For liposomes and emulsions, this process reduces their size from micron to nanometer range, often resulting in uniform particles with narrow size distributions. Unique Features of the EmulsiFlex-C5 Dynamic Homogenising Valve Giedpfx Aoxhgawjgbol The C5 uses a dynamic homogenising valve, which maintains constant pressure during sample processing. This consistency ensures the formation of highly uniform liposomes and micro-emulsions, with tight particle size distributions. Efficient Cell Disruption Most cells (including E. coli) can be lysed in a single pass, minimizing over-processing and reducing the risk of protein denaturation or degradation. Pressure Range: Adjustable from 500 to 30,000 psi Flow Rate: 1–5 L/h depending on pressure Minimum Sample Volume: 7 mL Holdback Volume: Less than 1 mL Temperature Control: Can be used with ice baths, external chillers, or in cold rooms Autoclavable: Easy cleaning and sterilization (SIP-compatible) Compact Size: 430 × 160 × 320 mm, 25 kg Power Source: Requires compressed or bottled air. For most applications (e.g., E. coli disruption or liposome formation), 100 psi air pressure is sufficient. Applications Disruption of bacterial, yeast, algal, insect, or mammalian cells Nano-sized liposome and emulsion formation Particle size reduction in pharmaceuticals, cosmetics, and food products Liposomal drug delivery systems Efficient homogenisation for biochemical and biophysical research

Condition: used, Year of construction: 1995, functionality: fully functional, inner diameter: 3,000 mm, TECHNICAL SPECIFICATIONS - Brand: LEJEUNE, year: 1995 - Material: 304L - Volume: 507 HL - Interior finish: 2B - Exterior finish: Brushed - Flat bottom with 2.5% slope. Roof - Central chimney - Ø 500 stainless steel hatch with clamping arm - Lifting rings Bottom - DN70 stainless steel butterfly valve - 4 fixing brackets for foundation slab Shell - 410 x 520 stainless steel door opening outwards - Oval autoclave door and ladder support Godpfx Agjwvuznebeil - DN70 stainless steel butterfly valve with sludge trap - Stainless steel taster - 1 level DIMENSIONS - Diameter: 3000 mm - Shell height: 7700 mm

Year of construction: 2014, condition: used, This listing is for 1 of 2 Mueller PyroPure P7310 Pure Steam Generator. The unit is in full working condition and is ready for immediate release. This Unit was installed new in 2015 by Freestead Process Technology. The “Turned on Time”of the unit is 65,000 hours, but as this unit is 1 of 2 generators in an alternating system it does not indicate the "Steam Production Time". The sites steam requirements were low therefore the unit is in immaculate condition. They have full maintenance records backed up on their electronic technical system supplied as an extra by Freestead. This Unit is fitted with a Allen Bradley Compact Logix PLC and Panel View plus 1000 HMI's The Unit is supplied with- ⦁ Feed water pump system ⦁ Pure steam condensate sampling system ⦁ Pure steam analyser ⦁ Stainless steel sheathing and frame ⦁ Feed water analyser ⦁ Degasser The Mueller PyroPure P7310 Pure Steam Generator is a high-performance system designed to produce pyrogen-free pure steam suitable for the most demanding applications, such as pharmaceutical production, biotechnology processes, and healthcare sterilization. Built to meet or exceed U.S. Pharmacopoeia (USP) standards, the P7310 combines precision engineering, advanced technology, and robust materials to ensure consistent performance and reliability. They are CE marked and compliant with 3.1B material certification. The terms pure steam and clean steam are often used interchangeably in the pharmaceutical industry. However, not all equipment marketed as clean steam generators are up to the task of producing WFI quality pharmaceutical pure steam. Mueller pure steam generators use a tangential nozzle to provide separation of impurities from incoming feed water, producing pyrogen-free steam that, when condensed, meets USP requirements for water for injection. Key Benefits Superior Steam Quality: Produces pyrogen-free steam that meets USP requirements, ensuring safety and regulatory compliance. Optimized for critical applications like autoclaves, clean room humidification, and steam-in-place (SIP) sterilization. Achieves a 5 Log reduction in contaminants, which corresponds to a 99.999% reduction in microbial populations. This level of reduction ensures the highest degree of sterilization, making it ideal for pharmaceutical and biotechnology applications where absolute purity is critical. Efficient Design: External evaporator allows easy access for inspection and maintenance, reducing downtime. Separation column has no internal components requiring maintenance, eliminating potential for bacterial growth. Efficient heat transfer with a double-tube sheet evaporator minimizes stress cracking and maximizes performance. Ease of Maintenance: All critical components can be serviced with only 24" of clearance around the system. Fully drainable design prevents standing water, reducing contamination risks. Polished 316/316L stainless steel construction ensures durability and easy cleaning. Enhanced Operational Features: Minimal instrumentation is required, reducing complexity and operational costs. Simplified control with an Allen-Bradley PLC system, compatible with Ethernet for integration with facility systems. Certified elastomers (USP Class VI) provide enhanced compatibility with feed water and product. Specifications Performance: Gjdpfoxv Af Sox Agboil Pure Steam Capacity: from 0 to 700 kg/hr at optimal feed water conditions. Operating Pressure Range: Pure steam output pressure up to 50 psig. Mater...

Condition: used, Year of construction: 1987, functionality: fully functional, total height: 7,700 mm, tank capacity: 50,700 l, warranty duration: 6 months, inner diameter: 3,000 mm, TECHNICAL SPECIFICATIONS - Brand : LEJEUNE - Year : 1987 - Material : 304 stainless steel - Volume : 507 HL - Interior finish : 2B - Exterior finish : Brushed - 2.5 % flat bottom ROOF - Central chimney - Ø 500 stainless steel hatch with clamping arm - Lifting rings VIROLE Gijdpewal Uaofx Agbol - Stainless steel door 410×520 with external opening - Oval autoclave door and ladder support - Stainless steel DN70 butterfly valve with sludge trap - Stainless steel taster - 1 level - Coil circuit BOTTOM - DN70 stainless steel butterfly valve - 4 fixing brackets for floor slab DIMENSIONS - Diameter: 3000 mm - Ferrule height: 7700 mm

Condition: used, This listing is for the RAININ Pipet-Lite XLS L-1200 8 Chanel Pipetter (Button Colour-code Blue 100-122 LTS The unit is in full working condition and is ready for immediate use Key Features LiteTouch™ System (LTS) incurs significantly lower tip‑ejection and plunger forces—reducing repetitive strain risk Ergonomic build: smooth plunger springs, “stiction‑less” seals, and a sure‑fit handle for all‑day comfort RFID tagging: each unit stores service/calibration data, aiding lab inventory and GLP compliance Fully autoclavable shaft and tip ejector—easy to clean and maintain Performance Specs (20–300 µL range) Increment: 0.2 µL manual adjustment. Gjdpfsxv Duhsx Agbjil Accuracy: ±0.8% (~1.6 µL at full volume). Precision: ≤0.3% (~0.6 µL)