Used Thermostat for sale (230)

Condition: excellent (used), Year of construction: 2005, Welcome. We offer the following: Temperature regulator – thermostat for injection molds – model HB THERM 160 U1 – series 4 Technical data: Dedpfez Sk Dzsx Aiiecp Manufacturer: HB - THERM Type: HB - 160U1 Year of manufacture: 2005 Medium: Water Temperature: 160° C Heater power: 8 kW

Condition: excellent (used), For sale is a professional Thermo Haake C30S Phoenix II laboratory thermostat, designed for precise cooling and heating of liquids and temperature stabilization. The unit can operate as a thermostat bath or a circulator to supply external measurement and research systems. It is equipped with a Phoenix II controller with a clear LCD display, allowing for convenient setting and control of operating parameters. Upon startup, it displays the current temperature and the setpoint value, confirming the correct operation of the controller. Technical data: Manufacturer: Thermo Haake Model: C30S Controller: Phoenix II Controller type: 003-6431 Device type: 003-8195 Power supply: 230 V / 50–60 Hz Current consumption: 9.2 A Refrigerant: R134a Protection rating: IP20 / IP30 RS-232 interface Multi-Port Digital temperature control Connections for external liquid circuit Mobile design with wheels Application: Dcodpoz Snbqjfx Aiijp The unit is ideal for: laboratories, quality control, material research, use with laboratory equipment, cooling and heating of measurement systems, temperature stabilization of liquids. Condition: used, functional, controller operates correctly, display is clear, normal signs of use, the tank contains beads to reduce medium evaporation, sold exactly as shown in the photos. Included in the set: Thermo Haake C30S thermostat, Phoenix II controller, beads for the thermostat bath, located in the tank.

Condition: used, Year of construction: 2011, SMC Deutschland GmbH Temperature Control Bath, Water Cooled, INR 244 713D Model: INR244713D Condition: Used Technical Specifications: Thermo-Con 220-230VAC 50/60Hz General Information: SMC Thermo-Con Temperature Control Unit (TCU), removed from ASML Yieldstar S-200B. Dcsdpfx Aijx I Al Eeisp Cooling/temperature regulation (MCW/PCW) for optics, electronics, sensor applications ASML 4022.639.27493

Condition: used, Huber Type: 030TW Huber Unichiller 030TW – Recirculating Chiller / Cooling Thermostat For sale is a Huber Unichiller 030TW, a powerful and efficient recirculating chiller for laboratory and industrial applications. The unit is designed for continuous operation and offers consistent cooling performance with high energy efficiency. Features & Functions: Modern touchscreen control with favorites, timer, data logging, and remote control options Robust, closed-loop cooling system for reliable continuous operation Dcjdpfxozii T As Aiijp Environmentally friendly refrigerant Suitable for ambient temperatures up to +40 °C Ideal for laboratories, chemistry, engineering, and process cooling Technical Data: Temperature range: –20 °C to +40 °C Temperature stability: ±0.5 K Cooling capacity: 3 kW at +15 °C 2.75 kW at 0 °C 2 kW at –10 °C 1 kW at –20 °C Circulation pump: max. 30 l/min at 4.1 bar Control: Pilot ONE touchscreen controller (5.7″ color display) Connections: Ethernet, USB, RS-232, Pt100 Refrigerant: R449A (CFC and HCFC-free, environmentally friendly) Dimensions (W × D × H): 400 × 440 × 1230 mm Weight: approx. 137 kg Condition: used Scope of supply: (See picture) Huber Unichiller 030TW Power cable (Subject to changes and errors in the technical data and specifications!) We will be happy to answer any further questions you may have over the phone.

Condition: used, Huber Dedpfxszukkmo Aiiecp Cooling and Heating Circulating Thermostat Huber CC-520w vpc Water-cooled cooling and heating circulating thermostat with Compatible Control CC2 For sale is a used cooling and heating circulating thermostat from the manufacturer Huber. The unit is suitable for temperature control of media and external consumers, for laboratory and process applications, as well as for general industrial cooling and temperature control applications. Technical data: Manufacturer: Peter Huber Kältemaschinenbau GmbH Type: CC-520w vpc Unit type: Cooling and heating circulating thermostat Controller: Compatible Control CC2 Temperature range: -55 to +100 °C Power connection: 400 V / 3~ N / 50 Hz Max. current consumption: 14.5 A Refrigerant: R507 Refrigerant quantity: 1.55 kg Max. pressure: 25 bar CFC & H-CFC free Dimensions: approx. 539 × 629 × 1102 mm (W × D × H) Weight: approx. 161 kg Operation / Interfaces: Compatible Control CC2 CAN POKO Alarm AIF REG+E-PROG ECS Standby RS232/RS485 Serial Equipment: Water-cooled refrigeration unit Compatible Control CC2 control Integrated stainless steel bath with bath cover Connections for external temperature control circuit Cooling water connections Over-temperature protection Stainless steel housing Movable base with castors Accessories as shown in the pictures Application areas: Process temperature control Laboratory technology Testing and experimental systems Machine and system cooling Temperature control of external consumers Industrial cooling and temperature control applications Scope of delivery: 1 × Huber CC-520w vpc cooling and heating circulating thermostat with Compatible Control CC2 Accessories as shown in the pictures Condition: Used Optical condition as shown in the pictures Signs of wear and tear due to age and use as well as signs of corrosion are present Shipping by forwarding agent is possible. Subject to changes, errors and prior sale. We would be happy to answer any further questions by telephone.

Condition: used, Julabo Julabo Immersion cooler CT 72/P incl. ED thermostat Item description: For sale is a Julabo immersion cooler CT 72/P with a Julabo ED (v2) temperature controller. The unit comes from a laboratory stock and is in used, but technically functional condition. The cooler heats and regulates the temperature stably; circulation is available (see photos). Ideal for laboratories, industry, education, experimental technology, or development. Technical data (excerpt): Manufacturer: Julabo Labortechnik GmbH (Made in Germany) Model: CT 72/P with ED thermostat (v2) Temperature range: approx. +10 °C to +60 °C Temperature stability: ±0.02 K Dcodpfxezix Dqj Aiijp Heating power: 2000 W at 230 V Circulation pump: Flow rate approx. 15 l/min Bath volume: approx. 18 liters Bath material: Acrylic glass / Stainless steel Interface: RS232 Power connection: 190–253 V / 50–60 Hz Protection class: I / IP20 Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: excellent (used), functionality: fully functional, Year of construction: 2026, wall material: stainless steel, We offer a very good brewery with fermentation tanks, bottling line, brewing house, and complete brewery equipment, manufactured between 2016 and 2024. Manufacturer: Various If you have any questions or require further information, please feel free to send us a message or call us. General Information • Location of the plant: Cormento GmbH, Berta Benz Strasse 2, 40670 Meerbusch, Germany • Year of construction of the main components: 2016 • Condition: very well maintained • Previous owner: Cormento GmbH Technical Data • Batch size per brew: 6 HL net wort • Maximum brews per day: 2 • Brewing time per batch: approx. 6–7 hours • Space requirement: approx. 50-70 m² • Power consumption: approx. 12 kWh • Personnel requirement: 1 person Brewing House (year of construction 2016) • Malt mill: Sommer/BRD, capacity 1,100 kg/h • Mashing and brewing kettle: Prinz Ludwig Brau/BRD/China, stainless steel, batch size 6 HL, temperature probes, shut-off valves, spray heads for CIP • Lauter tun & whirlpool: stainless steel, frequency-controlled drive, removable bottom, temperature probes, spray heads • Wort cooler: stainless steel, cooling with cold and ice water Dcodpfo Ah D Hqsx Aiisp • Accessories: valves, pipelines, agitator, pumps, automatic brewing house control system with PLC • Steam generator: 13–55 kg steam/h up to 110°C, 36 kW • CIP system: available Fermentation/Storage Cellar • 5 x fermentation and storage tanks (Uni Tank ZKG) China: stainless steel, useful capacity 6 HL net each, pressure 2 bar, insulation 100 mm, 2 jacket cooling, airlock, spray head, 1 temperature sensor, height 2,300 mm • 3 x fermentation and storage tanks (Uni Tank ZKG) China: stainless steel, useful capacity 12 HL net each, pressure 2 bar, insulation 100 mm, 2 jacket cooling, airlock, spray head, 2 temperature sensors, height 3,520 mm, year of construction 2024 • Cooling system: glycol, cooling temperature -5°C, thermostat control • Ice water tank: 800 l • Accessories: temperature control, piping, cooling unit Bottle Filling • Fillmore Packing Solutions USA • FB4-4C X6 Series Year of construction 2020: According to the manufacturer, up to 600 bottles per hour, set up for long-neck 0.33 l, long-neck 0.5 l, and Belgian beer bottles 0.75 l. The operation is semi-automatic. Bottle Cleaning • Asta: The system was completely overhauled by the manufacturer in 2020 and converted from milk bottles to beer bottles and set up for long-neck 0.33 l, long-neck 0.5 l, and Belgian beer bottles 0.75 l. • Ebatec Jemi: Universal bottle washing machine, year of construction 2022 • Soaking wheel: can be heated Filtration • Seitz: Orion, year of construction 1979, very robust and heavy design Open Fermentation Tank • Open fermentation tank: Former milk tank with agitator and bottom cooling CIP System • CIP system Additional Information • Delivery conditions: Ex brewery Meerbusch • Dismantling, transport, and installation: Costs and organization are the responsibility of the buyer • Warranty: No warranty, warranty excluded

Condition: like new (used), Rittal Thermostat SK 3110 Like-new control cabinet thermostat for temperature control in control cabinets and enclosures. Suitable for controlling fans, heaters, or heat exchangers. Manufacturer: Rittal Type: Control cabinet thermostat Model: SK 3110 Mounting type: DIN rail Application area: Control cabinet air conditioning Switching contact: Temperature-dependent Application: Fan control Application: Heater control Housing color: Gray Location: Kusel Dcedpezdnk Asfx Aiisp Quantity: 142 units available

Condition: used, Year of construction: 2020, operating hours: 17,000 h, functionality: fully functional, clamping force: 2,450 kN, screw diameter: 50 mm, clearance between the columns: 610 mm, total length: 6,700 mm, total width: 1,700 mm, total height: 2,000 mm, overall weight: 12,000 kg, power: 48 kW (65.26 HP), input frequency: 50 Hz, input voltage: 400 V, input current: 68 A, We offer this used WOOJIN PLAIMM TE250 injection molding machine, manufactured in 2020. Dsdjzwupxjpfx Aiiecp Serial number: 2002501597 Model: TE250 Clamping force: 2450 kN Screw diameter: 50 mm Injection unit: IE780 Electrical power: 48 kW Motor rated current: 50 A Rated current at full load: 68 A Control voltage: 400 V Frequency: 50 Hz Dimensions (L×W×H): 6.7 × 1.7 × 2.0 m Weight: 12 t Date of manufacture: 2020.12.21 Robot GK controller 2x Thermostat If you have any questions or require further information, please send us a message or contact us by phone.

Condition: used, This listing is for the Eppendorf thermostat C Dry Block Heater The unit is in full working condition and is ready for immediate release Description Peltier technology enables comfortable and precise temperature control from -10°C to +110°C Heating and active cooling in all common vessel and plate formats from 5μL to 50mL Precise maintenance of various temperature levels Reliable prevention of condensate formation with optional ThermoTop™ (tect™) lid Highly flexible due to large selection of exchangeable SmartBlocks Dry incubation for improved lab hygiene Simple and intuitive operation due to predefined temperature keys (4, 16, 37, 56 and 95°C) Individually store up to 15 programs Comprehensive range of program functions Eppendorf Thermostat C is the ideal device to accurately set and maintain temperatures. The ThermoStat C features excellent temperature management. Peltier technology provides the comfortable and precise temperature control of all conventional lab vessels. The operation is easier and more intuitive than ever before. Predefined temperature keys provide quick access to five important experimental temperatures. Due to comprehensive program functions, you can also individually store 15 programs. With an extensive range of exchangeable SmartBlocks, the ThermoStat C adapts to any application. Key Features Heating and active cooling in all common vessel and plate formats from 5 μL to 50 mL Excellent temperature management Precise temperature control from -10°C to 110°C (110°C can be set when using the 12 mm and cryo SmartBlocks.) Precise maintenance of various temperature levels Dcjdpfx Ajxwc Nmoiijp Reliable prevention of condensate formation with the optional ThermoTop® (tect) lid Maximum flexibility thanks to large selection of exchangeable SmartBlocks™ Dry incubation for improved lab hygiene Simple and intuitive operation due to predefined temperature keys (4°C, 16°C, 37°C, 56°C and 95°C) Comprehensive range of program functions 2 second block exchange due to quick release system of SmartBlock

Condition: used, Lauda bath circulator thermostat Dedpfx Aiow Un I Doiscp - Side panel missing, sides slightly dented - Shipping available at extra cost

Condition: used, Julabo Type: FP51-SL (v.2) Julabo recirculating thermostat SL v2 with cooling unit FP51 – heating/cooling thermostat Description: For sale is a professional Julabo recirculating thermostat SL (v2) in combination with the Julabo cooling unit FP51. The device is used for the precise temperature control of liquids and external circuits. It is ideal for laboratory, industrial, and test bench applications. The system enables both heating and active cooling and impresses with stable and accurate temperature control. Technical data (excerpt): Dcsdpfx Aezizn Sjiisp Recirculating thermostat: Julabo SL (v2) Temperature range: approx. +20 °C to +320 °C Mains connection thermostat: 230 V / 50–60 Hz Cooling unit: Julabo FP51 Mains connection cooling: 400 V / 3NPE / 50 Hz Refrigerant: R507 Protection class: IP21 Dimensions & weight: approx. 60 × 70 × 100 cm approx. 120–150 kg Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Year of construction: 2015, Length 12000 mm Width 9000 mm Used manual overhead conveyor system with a SCHUKO paint mist extraction unit and a warm-air supply system. Includes a cross-flow heat exchanger (heat recovery) and a manual overhead conveyor; in very good, well-maintained condition. Manufactured 2015–2016. ----- Sold on behalf of a client! The system is still in operation and available for inspection. Price is ex-site; dismantling to be performed by the buyer ((Scissor lift and forklift available on-site)). Group 1: Dry-type paint mist extraction system, model FARBMEISTER: ----- Model FARBMEISTER-25/30, including a stationary paint mist extraction wall with dry-type filtration. Baffle/filter area: H x W 2,790 x 3,140 mm (cardboard filter cells). Features a centrally positioned, solid baffle panel designed to reduce the maximum required airflow, tailored to the specific frames and casements being painted. Includes an additional pull-down pre-filter. This reduces the effective extraction area—and consequently the total airflow—from a standard ~14,000 m³/h to the required 10,500 m³/h. Also includes a 250 mm deep extension around the perimeter (left, right, and top) to improve the capture of overspray. A high-performance centrifugal fan (model L-EX 500) with a 5.0 kW motor, capable of an exhaust air volume of 10,500 m³/h (free-blowing), including all necessary ductwork and components to construct and install the extraction system—extending through the wall to the outside—as well as a manually adjustable exhaust air damper. Group 2: Warm Air/Supply Air System for the Spray Booth: ----- BB 1,100 warm air/supply air system for the spray booth, including a supply air unit (model WZL110-com) equipped with an integrated heating coil (hot water connection, supply temperature +80°C). The unit has an air capacity of 10,500 m³/h and a 5.0 kW motor. The required heating capacity, based on a temperature differential (Delta-T) from -15°C to +22°C, is 137 kW. The system features an automatic louver damper at the air intake to seal off the ductwork and prevent cold air from entering when the system is not in operation. It also includes an explosion-proof warm-air thermostat designed to shut down the system in the event of a loss of heating capacity (hot water supply). This group encompasses all ductwork and supply air components, spanning from the external air intake to the air outlets in the distribution ceiling located above the spray wall. A cross-flow plate heat exchanger for heat recovery from the exhaust air duct leading outdoors, while simultaneously preheating the fresh air drawn in from outside. With an exhaust air temperature of +20°C and a fresh air temperature of -12°C, this results in an energy saving of approximately 58 kW of heating capacity. Includes all necessary duct and pipe components for integrating the exhaust and supply air lines with the plate heat exchanger, in accordance with the attached planning drawing. Also includes a maintenance/repair switch and a differential pressure monitor for supervising the intake filter. Please note that the heat exchanger core must remain easily accessible for routine maintenance and cleaning. Group 3: Electrical System Control for Paint Mist Extraction: ----- Dodpo Ahkkhofx Aiiocp Electrical system control for paint mist extraction...

Condition: like new (used), Housing made of impact-resistant plastic Application: Temperature control Width: 110 mm Height: 125 mm Depth: 70 mm Dedezcu Utepfx Aiiecp Weight: 302 g Condition: Like new

Condition: like new (used), Year of construction: 2023, functionality: fully functional, Forced convection oven, electric, France Etuves XXL08, year of manufacture 2023, 622 operating hours - Volume: 8000 liters - Max. temperature: 200°C - Internal dimensions (W x D x H): 2000 x 2000 x 2000 mm - External dimensions (W x D x H): 2559 x 2578 x 2665 mm - Fresh air intake and exhaust with adjustable damper Dsdo Ahixzepfx Aiiscp - Exhaust fan - Safety thermostat - Double door - Heating power: 36 kW - Total power: 39.8 kW - Power supply: 400V, 3-phase, 50 Hz - Weight: 1300 kg - Documentation, CE declaration - Electrically tested and with current DGUV test report We would be happy to offer transport, installation, and training for your employees. Inspection in our machine hall is possible at any time by appointment. Oven, ovens, drying oven, industrial oven, drying cabinet, heating oven, heating cabinet, forced convection oven, chamber oven, heating oven, chamber convection oven, annealing oven, tempering oven, convection chamber oven.

Condition: good (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: DEK-1807003, working width: 320 mm, total width: 900 mm, input frequency: 50 Hz, input voltage: 380 V, total length: 3,500 mm, type of input current: three-phase, eisenkolb DEKO-2000 Curtain ironing table with preheated rotating surface and steam extraction The ergonomic design of the ironing surface, angled at 6 degrees, with weightless suspension/guidance of the iron, prevents fatigue and RSI (Repetitive Strain Injury). Rotating, electrically thermostat-controlled, heated, and rotating ironing surface measuring 320 x 60 cm, with steam extraction and pedal control. Power consumption according to the manufacturer: 2,000 W The ironing surface can be moved forward or backward using a foot pedal, making it easy to transport an ironed curtain. Vacuum function for optimal steam ventilation and improved ironing results. Fabric trays at the front and rear to keep the curtain clean. Dcedpfx Aj Abar Reiijp Technical specifications: Dimensions: 350 x 90 cm Electrical: 380 V, 3-phase, 2000 W Inspection possible by appointment. Collection in 58239 Schwerte.

Condition: used, Year of construction: 2015, operating hours: 5,000 h, functionality: fully functional, machine/vehicle number: 210054, tank capacity: 225 l, usable tank capacity: 200 l, total length: 800 mm, total width: 1,600 mm, total height: 1,020 mm, inner diameter: 1,498 mm, overall weight: 315 kg, wall material: stainless steel, wall thickness: 10 mm, wall structure: double-walled, number of chambers: 1, manhole diameter: 50 mm, manhole location: front, reception height: 250 mm, discharge height: 250 mm, operating temperature: 300 °C, operating pressure: 20 bar, input voltage: 230 V, input current: 10 A, input frequency: 50 Hz, type of input current: AC, Equipment: CE marking, The Firex Easybratt 200L Gas Variant (BM1G200I) is a heavy-duty industrial tilting bratt pan engineered for bulk cooking, braising, shallow frying, and boiling. While marketed in the 200-liter chassis tier, its precise volumetric breakdown consists of a 225-liter total geometric capacity with a 170-to-200-liter usable working capacity. The comprehensive breakdown of dimensions, weight, and utilities sourced from the manufacturer's technical specifications includes: 📐 Physical Dimensions & Cooking Vessel Overall Width: 1600 mm Overall Depth: 900 mm Overall Unit Height: 1020 mm (with lid closed) Vessel Internal Width: 1498 mm Vessel Internal Depth: 564 mm Vessel Internal Height: 250 mm Cooking Surface Area: 84 dm² 🏋️ Weight & Construction Details: Net Weight: 315 kg. Pan Base Thickness: 10 mm to 15 mm high-thickness compound steel for balanced heat distribution. Chassis & Tank Material: High-grade AISI 304 stainless steel throughout. Tilting Mechanism: This is a motorized model; the suffix is BM1G200I. Lid: Double-skinned, counterbalanced lid with spring loading to reduce heat loss and enable hands-free opening. 🔥 Gas & Burner Specifications: Total Gas Power: 40 kW. Burner Type: High-efficiency stainless steel multi-tube gas burners. Gas Connection Size: 1/2" inlet. Thermostatic Control: Micro-adjustable range between 45°C and 300°C Safety Features: Automated pilot valve safety shut-off; when the tank is tilted/lifted, burners drop down to a pilot-only mode and automatically re-ignite when lowered back into place. 🚰 Water & Electrical Supply Requirements Water Connection Size: 1/2" cold water inlet Dcodpfx Aijz Ad Steiep Water Supply Pressure: 50 to 300 kPa Water System: Integrated swivel water fill tap built into the top surface for automated pot filling and seamless cleaning. Electrical Feed: Requires a basic 230V / 1-phase supply solely to power the easy-light electronic ignition and internal control array.

Condition: excellent (used), For sale: Form thermostat – Tool Temp TT-188 Max. heating temperature – 90°C Medium – water Power: 9850 Watt Dedj Aia U Aepfx Aiiscp The device features: - vacuum pump - vacuum reservoir - function for extracting the medium from the mold - the device can be integrated with the machine, and operates unattended - PRICE IS PER UNIT.

Condition: used, Year of construction: 2010, functionality: fully functional, SAHINLER FM-12 hydraulic flanging machine for forming the edges of dished ends, tank heads and boiler bottoms. Made in Turkey, year 2010, used condition. Built for tank, boiler and pressure vessel manufacturers who need clean, repeatable flanged edges ready for welding to the vessel shell. Main features: - Electro-welded frame, thermally stress-relieved for rigidity and stability during flanging - Motorized lower bottom-holder carriage on slides, moved by worm screw, with hydraulic height adjustment - Induction-hardened shaping roll, driven by a radial piston motor with variable speed - Induction-hardened flanging roll, pressed by hydraulic cylinders, with variable speed Dodpfxo Ahzh Dj Aiijcp - Manual or automatic flanging mode - Two hydraulic, height-adjustable bottom support rolls - Complete hydraulic unit with oil tank, filter, thermostat and heat exchanger - Control panel with joysticks, pushbuttons, warning lights and emergency stop Applications: tank and tanker heads, boiler bottoms, pressure vessel ends, silo and hopper bottoms. Suitable for mild steel, stainless steel and aluminium. Exact capacities (plate diameter, thickness, flanging radius), more photos and video are available on request. The machine can be inspected on site.

Condition: used, UNIKA 700 Series Serial number: 008685/07/17 Electrical power Electrical power 6 kW Power supply: 400 V three-phase with neutral Frequency 50/60 Hz Smooth cooking surface Compound steel plate Stainless steel body Temperature regulation via mechanical thermostat Dcsdpfx Aie Ah H A Ssiop Control via rotary knob Grease extraction for cooking Open lower base Dimensions: 400 × 700 × 900 mm Weight: 75 kg

Condition: used, This listing is for a Elmi Sky Line Shaker Thermostat . The unit is in full working condition and is ready for immediate release. The Elmi Sky Line Shaker Series is a high-performance line of orbital and rocking shakers, engineered for non-stop operation in a wide range of medical, chemical, and biological laboratories. These units offer exceptional flexibility, making them adaptable to different applications with a variety of optional accessories and attachments. The shakers come in multiple sizes and loading capacities, ensuring they can meet the specific needs of any laboratory environment. Key Features: High-Performance Operation: Designed for continuous, reliable use, ensuring stable and consistent results across various lab applications. Orbital and Rocking Motion: Provides uniform, controlled mixing, ideal for biological samples, chemical reactions, and cell cultures. Flexible Design: Compatible with a range of optional accessories and attachments to support different experimental setups. Variety of Sizes and Capacities: Multiple models are available, offering varying loading capacities to suit specific laboratory requirements. Dodpfxexx Abfs Aiijcp Non-Stop Operation: Built for extended use, ensuring continuous mixing and agitation for time-sensitive processes.

Condition: good (used), IR thermography system, brand: Thermo Sensorik Model: Thermo Spector Year of manufacture: 12/09 Scope of delivery: 1x InSb 640 SM thermographic camera (serial number 0001983179, format 640x512 pixels) with power supply and temperature display 1x Light box with power distribution unit and vacuum distribution unit on a motorized table, height-adjustable stand with cable winch for the IR camera Djdpfxozcmldj Aiiocp 1x Thermal test plate (temperature-controlled solar cells - contact unit) with vacuum suction, temperature control unit and electrical excitation (thermostat and vacuum pump not included) 1x Control system includes: - LED matrix control - power supply for 6 LEDs (Thermo Sensorik LED Control Unit, S/N 000207013) - Power supply (Thermo Sensorik Power Supply + Multi-I/O-Box, S/N 000196029) - Power source (Höcherl & Hackl NL Series Source & Sink Model NL20V20C20) - Hardware includes a PC-compatible computer with camera interface, MPS5 software and Lock_In Suite software - Monitor, keyboard, mouse, manual

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, power: 5.5 kW (7.48 HP), cutting height (max.): 600 mm, cutting width (max.): 510 mm, control type: CNC control, Equipment: documentation/manual, lighting, BT65 touchscreen control panel Motorized duplex brushing system 5.5 kW drive motor Centralized lubrication system Deviation control Operator platform (work surface height -150 mm) 600 mm 1,270 mm 510 mm 10 to 110 m/min Ball screw CNC measuring device, cutting width 5 to 510 mm Linear laser Spraying gun Dcsdpfxe Adufwj Aiijp Chip conveyor (scrapers), height 1,200 mm Stainless steel collection tray with grating Electrical cabinet air conditioning Hydraulic oil heater Electrical cabinet pre-heating with thermostat Light column Lubricant flow control

Condition: like new (used), Year of construction: 2018, operating hours: 300 h, functionality: fully functional, machine/vehicle number: RA9VE021000061, overall weight: 2,000 kg, stack height: 300 mm, type of input current: three-phase, total width: 1,600 mm, total length: 7,000 mm, total height: 1,500 mm, input voltage: 400 V, input current: 16 A, Konica Minolta AccurioPress C3080 color digital press, year 2018. The machine was initially used as a showroom demonstration unit, then taken over by means of a leasing contract in 2022. Dcsdpox Syghsfx Aiiep It was only operated briefly for a few months before being shut down due to a business closure. After it was taken out of production, it was powered down, packaged, protected, and stored under appropriate conditions. The last meter reading, dated July 8, 2024, shows 18,562 black & white impressions and 494,520 color impressions—a very moderate usage level considering the print engine’s capacity and the model’s expected lifespan. It is equipped with the following options and modules, among others: DF-706 document feeder, EF-103 envelope kit, inspection lamp, HT-511 heater/dehumidifier, MB-508 bypass tray, PF-707m vacuum feed unit, HT-506 thermostat, FA-502 connection kit, FS-532 stapling unit, PK-522 punching kit, HM-103 humidifier, RU-518 relay unit, SD-513 folding and stapling module, TU-503 head and foot trimming, CR-101 creasing kit, FD-504 spine press option, IQ-501 intelligent quality control unit, VI-511 and VI-509 interface kits, Fiery IC-313 print controller, and Monitoring connection.

Condition: new, power: 140 kW (190.35 HP), fuel type: diesel, color: white, gearing type: automatic, number of seats: 23, Year of construction: 2026, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, soot filter, Sprinter 519 Lord Comfort – 517 version with glass roof available upon request Vehicles are equipped with the new GSR2 and GSR3 systems (mandatory): For example: - Driver comfort package - Reversing camera - Blind spot assist - Turn assist - MBUX 10" (radio with Bluetooth, CarPlay, touchscreen) - Tire pressure sensors - Attention assist - Active lane keeping assistant - Start information assistant - Intelligent speed assistant - Distance assistant - Rain sensor - Electrically adjustable exterior mirrors - Adaptive cruise control Equipment package Original Mercedes: - Front air conditioning - Auxiliary heater - Air-suspended driver’s seat with heating - PDC front and rear, front camera / reversing camera - Fog lights - 9-speed automatic transmission 519 additionally includes LED headlights. - Rear extension 500 mm, total length 7,836 mm - Thermal and acoustic insulation - Extra large panoramic windows inside and out, double-glazed - Panoramic driver’s window with electric sunblind - Glass roof - 19 sleeper seats + guide seat - Total capacity 20 incl. driver - Webasto / Diavia 12 kW rooftop passenger air conditioner - Multi-stage night lighting: white/orange/blue - Convector heating left and right in passenger compartment, thermostat controlled - Electric exterior swing door - Sleeper seats with 3-point seat belts, magazine net - Double glazing, black tinted - Side walls and ceiling trimmed with fabric and faux leather (no simple ABS or bare metal interior) - All attachments painted in vehicle color - Passenger compartment clock - USB ports at every seating row - Overhead channels left and right with luggage racks and service sets incl. reading lamps, speakers - Half podium - Lowered, sliding rear luggage compartment for last row - Refrigerator - Optional: hubcaps Gerflor wood-look flooring Dcedpfx Aie Aica Ujiep Net export possible. We make shipment worldwide. Price 517 silver: €112,990.00 Price 519 white: €114,990.00