Used Auto Label Dispenser for sale (7,209)

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Polen 1445 € 19 mm Weldon 1 kW 307 mm 221 mm 317 mm 135 kg 36 mm 51 mm 70 mm 350 U/min 6 mm New PRO-36 AUTO is equipped with unique LED monitoring system that indicates current condition of the drill and gives Dksdpeyrhppefx Aiwol additional safety and diagnostic information. Auto Feed Smart Drive System optimizes parameters for each cutting/milling operation, when drill works in automatic mode. The drill controller keeps choosing the most effective working conditions based on the correlation of motor load, feed speed and the range of allowable cutting parameters for a given tool type and hole diameter. It results in extending tool life of both HSS and TCT cutters and enhanced machine performance. Countersinking and working on thin workpieces, when the LED shows that the clamping force is low (flashing green) are possible in manual mode only. A safety strap protects the machine from falling in case of a clamping loss. Features and benefits: • LED Monitoring System indicates current condition of the drill and gives safety and diagnostic information • LED Monitoring System flashes green when inadequate adhesion is detected due to e.g. gap or thin workpiece • Auto Feed Smart Drive optimizes the milling parameters for each tool individually depending on its type (HSS or TCT) and hole diameter from 12 mm up to 36 mm, that significantly extends tool life • tilt sensor stops the motor if machine breaks away • dual bars guide system ensures extraordinary stiffness and adjustment free operation • Magnetic Field Shape Control (MFSC) provides maximum holding power on thin materials • Auto-feed control stops the machine when cutter goes through • protection against auto restart after power cut off • compact, rigid design with ultra-light weight of 13.5 kg Standard shipping set: • Drilling machine • Metal box • Safety strap • Cooling system bottle • Chip guard • 4 mm hex wrench • Operator’s Manual

Condition: good (used), Item: D-1717-Fischer Labeler Dkedpoidmvrsfx Aiwel Fischer Labeling Double machine Mount at stainless steel frame. Adjustable position of labels. Transport conveying belt 1600 x 200 mm. Labeling at top and from side of product! Label width max. 100 mm? Sensor read Stationed in Denmark!

Condition: ready for operation (used), Year of construction: 2009, A fully automatic rotary labeling machine Anker (KHS Group) is available. Labeling method: wet glue labels, bottle formats: 250ml/500ml/750ml, label dimensions 1 X/Y: 33mm/119mm, label dimensions 2 X/Y: 36mm/150mm, label dimensions 3 X/Y: 48mm/158mm, labeling capacity: 20000bottles/h. Including formats for wet glue and VE+RE. Documentation available. An on-site inspection is possible. Dedpfx Asyv H Iyoiwskl

Condition: used, Year of construction: 2005, Overview  This linear labeling machine was manufactured in 2005 by Mecatronic. The machine is designed for applying self‑adhesive labels on bottles. Technical data Formats: 3/8 L and 3/4 L up to 1.5 L Application: Bottle labelling Configuration: Linear machine, 4 labeling heads Labeling system: Self-adhesive Dedpfx Aisyq Iu Ajwjkl

Condition: ready for operation (used), Diameter range: 50 mm - 135 mm Height range: 80 mm - 340 mm Heads: 10 Production capacity: 2,500 - 6,500 cans per hour Djdpfx Aeyv Addoiwjkl Label length: 40 mm - 130 mm Two labelling stations (front and back labelling) Includes several tooling sets for different bottle types

Condition: used, functionality: fully functional, With this offer, you are purchasing a used ‘Watkiss Auto SpineMaster’ book spine press. Dkedpjym Nlnefx Aiwol Item for sale: 1 x Watkiss Auto SpineMaster Condition: This offer is for a used device, which may show signs of wear (minor scratches or yellowing). The device has been tested for functionality. Packaging and shipping: You are welcome to view the device during our business hours. Please make an appointment! Seaworthy packaging and worldwide shipping available on request! A functionality test will be recorded on video for you before shipping or collection. For more information, please feel free to contact us personally.

Condition: used, functionality: fully functional, With this offer, you are purchasing a used ‘ALTech ALbelt’ labelling device. Item for sale: 1 x ALTech ALbelt with the following features: Dkedjymwqfopfx Aiwel From 2018 Condition: This offer is for a used device, which may show signs of wear (minor scratches or yellowing). The device has been tested for functionality. Packaging and shipping: You are welcome to view the device during our business hours. Please make an appointment! Seaworthy packaging and worldwide shipping available on request! For more information, please feel free to contact us personally.

Condition: used, Year of construction: 2016, Marel labeling machine Djdpfx Aijxnkh Sjwekl - Concept 500 - Top labeller

Condition: as good as new (ex-display), Year of construction: 2026, The BTS-Drum Crusher AUTO is ideal for compacting 30 to 220 Ltr drums / barrels, but also plastic and cardboard drums can be easily reduced to their minimum of volume. In many cases this compacted material can then even be marketed again. The drum press impresses with its ease of use, safe operation and high throughput quality. By crushing these valuable and recyclable materials you achieve a volume reduction of up to 90%, a significant saving on your disposal costs and you properly return the material back into the recycling cycle. Pressing force: 24 Ton Machine size: 2587 H x 1190 W x 1000 D mm Machine weight: 690 kg Transport height: 1800 mm Compaction rate: 8:1 Cycle times: 40 seconds Motor: 11 kW 32 Amp Power supply: 380 - 400 V (3 phase) Noise level: 68 dB AUTO compaction cycles Compaction head with spikes to punch the drum to drain out any residual liquids Maximum safety standards by totally enclosed chamber Dodoc Spguspfx Aiwskl 30 Ltr. collection tray with tap connection Useable for 30 to 220 Ltr. steel drums, plastic drums and cardboard drums A quality product “Made in Europe” Suitable for compacting Steel drums Plastic drums Cardboard drums Fiber and paper drums Optional extras Machine colour RAL Can and filter crush insert Multi head to compact inside a 200 Ltr steel drum Drum Crusher, Drum Press, Drum Compactor, Barrel Crusher, Barrel Press, Barrel Compactor

Condition: used, Used Premier Labellers model P150 tamper evident labeller. Can do front and back tamper evident seals/labels to cartons and boxes. Approximate capacity 150PCS/min. Dkedsymazyepfx Aiwol

Condition: used, Year of construction: 2017, VWS Nederland – Top/Base Labeling Machine (R → L) Manufacturer: VWS Nederland Type: Top / Base Labeling Machine (Right → Left) Year of manufacture: 2017 Description The VWS Nederland Top/Base Labeling Machine is designed for automatic labeling of products on both the top and bottom sides. The system operates from right to left (R → L) and is suitable for integration into automated packaging and production lines. This labeling system is commonly used in the food, pharmaceutical, and consumer goods industries where accurate and consistent label placement is required. Technical Specifications - Manufacturer: VWS Nederland - Machine type: Top and bottom labeling machine - Labeling direction: Right → Left (R → L) - Label positions: Top and base (bottom) - Year of manufacture: 2017 - Application: Automatic labeling of trays, containers, and packaged products - Integration: Suitable for inline production and packaging lines Key Features - Automatic top and bottom labeling - Right-to-left product flow - Designed for high labeling accuracy - Suitable for various product sizes and packaging formats Dodpfx Aieyt Hmvswjkl - Robust industrial construction Applications - Food packaging lines - Pharmaceutical products - Cosmetics and consumer goods - Industrial packaging operations Condition Used Manufacturer: VWS Nederland

Condition: good (used), mileage: 188,964 km, power: 132 kW (179.47 HP), first registration: 12/2018, fuel type: diesel, axle configuration: 4x2, wheelbase: 3,640 mm, fuel: diesel, fuel tank capacity: 75 l, color: white, driver cabin: day cab, gearing type: automatic, number of gears: 8, emission class: euro6, Year of construction: 2018, Equipment: ABS, AdBlue, USB port, air conditioning, central locking, electric window regulation, electronic stability program (ESP), fog lights, full service history, onboard computer, power assisted steering, power mirror, soot filter, traction control, trailer coupling, = Further options and equipment = - Armrest - Exterior mirrors with indicator light - Automatically dimming interior rear-view mirror - AUX input - Cup holder - Passenger bench seat - Rev counter - Third brake light - Driver airbag - Height-adjustable driver’s seat - Remote central locking - Windscreen - Tinted glass - Height-adjustable steering wheel - Height-adjustable front seats - Foldable exterior mirrors Dsdpfex Hqp Nox Aiwjkl - Air conditioning - Rear headrests - LED lighting - Centre armrest - Particulate filter - Radio/CD player - Disc brakes - Headlamp height adjustment - Immobiliser - Partition wall with window = Remarks = Very well-maintained VW Crafter 2.0 TDI 180 hp tractor unit, automatic, first registered on 03.12.2018, 3 seats, Belgian registration, permissible total weight 7,000 kg, air conditioning, electric windows, 2 keys, service booklet. For further photos or information, please contact us by email at or by phone at . You can find our entire portfolio at = Additional information = General information Number of doors: 2 Cab: single Technical information Number of cylinders: 4 Engine capacity: 1,968 cc Front axle: steered Weights Unladen weight: 2,245 kg Payload: 4,755 kg Gross vehicle weight: 7,000 kg Functional Body manufacturer: DSG Condition Technical condition: good Optical condition: good Damage: none = Company information = Nidro Cars Holland is located in the centre of the country and is the right address for the purchase of your car, van or truck. The price stated is the 'internet take-away price'. For questions or a test drive, please contact us: LOOK FOR OUR ENTIRE STOCK AT All types of trade-ins welcome! (Our advertisements are compiled with the utmost care, but no rights can be derived from their contents).

Condition: new, Year of construction: 2026, The item is generally a project-based product or, depending on availability, available as a demonstration machine. The purpose of the labeller is to fully automatically label a cylindrical product. Dsdpfx Asq U Sihoiwekl Description - Machine materials: 1.4301 and anodised aluminium alloy - Control via Siemens PLC + HMI - Cylindrical products from Ø20mm to Ø110mm - Accuracy: ± 1 mm (excluding product and label faults) - Technical documentation provided via regional partners Label roll - Inner diameter: 76 mm - Outer diameter:

Condition: as good as new (ex-display), Year of construction: 2022, functionality: fully functional, machine/vehicle number: ET2-120-IP19, The aim of the labeler is to label flat bags from one side. Dkjdpfx Aisq U Sfwewjl - Liner material: translucent paper (tear-resistant) - Repeat length: Label length + min. 3mm - Machine materials: SS304 and anodized aluminium alloy - Stepper and servo motors for precise positioning of the label - Controlled by a Siemens PLC - Label roll inside: 76 mm - Label roll outside: max. 350mm - Accuracy: ± 1 mm (except for product and label errors) - Label dimensions (LxW): 15-300mm x 10-130mm - Power: 2.0kW / 230V / 50Hz - Dimensions (LxWxH): 2,000mm x 800mm x 1,500mm - Weight: approx. 180 kg

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: 18033, We offer this used Bobst M5 430 8K machine, year of construction 2018. Manufacturing year: 2018 Machine type: M5 430 8K Serial number: 18033 Print width: 430 mm 8 colors GEW UV Chilled drums Automatic register control (digital cameras) Automatic pressure control Combo configuration Delamination / Relamination Corona treatment Turnbar Both-sided material cleaner Combo (cold foil, peel-off labels) Video inspection 3 x die-cut stations (also semi-rotary option included) 2 x DigiGap Fully servo-driven SMARTSCAN (E+L system) 200% inspection of the web, web monitoring, label counter, defect signal output If you have any questions or need more information, feel free to send us a message or give us a call. Dkodpfxeytc Ipo Aiwsl

Condition: used, Year of construction: 2003, Labeler, make Krones, type: Universella 10-4-4, for 10.000 - 14.000 bph, parallel machine, with 10 bottle dishes and 4 glue pallets, with 3 bottle sets, with 2 aggregates for body, shoulder- and back label, with 2 heatable glue pumps, built 2003, already dismantled Dedeunh T Eepfx Aiwskl

Condition: new, Year of construction: 2025, Metal roof snap lock machine SLP-1 auto with side punching option is the latest project of our company in the direction of equipment for metal roofing production. Snap lock machine SLP-1 auto can produce click-seam panels with fixation holes and punch off side parts of the panels, it makes possible to bend the edge of the panel and join it to the roof elements after. Our machine is equipped with an automation system and make production in a fully automatic mode. This process comes following way: operator of machine put end of metal roll to the pulling rollers of the machine, which moves it to the rolling part of the equipment. At the beginning of the rolling process, two pneumatic punching presses from each side of machine make side cuts of panels. After cutting, the rolling process goes to the next rolling rollers. They gradually form the roofing panel profile and cut out fixation holes with special cutting tool rollers. After rolling, special automatic shear at the end of machine cut off the panel into length with necessary sizes. As machine cuts side parts of panels at the beginning of production process, so it cuts only flat part of panel in the end of production. It makes panel quality better and there are no any deformations as with a profile cutting happens, when guillotine shear has to cut not only flat part but also the lock part of panel. Specifications: Dimensions (mm): Dodpfxsuzv Tzj Aiwskl rolling machine 3000x1400x900 guillotine shears 400x1120x1130 Weight (kg): rolling machine 643 guillotine shears: 110 Drive power: rolling machine: 1.5 kW, 220V (or 380V on request) guillotine shears: 1.1kW Maximum thickness of sheet metal (mm): 0.6-0.7mm Workpiece Width (mm): 250-700 Rolling speed (m/min): up to 10 Metal roof panel machine SLP-1 auto has an automation system so help to make minimum part of operator works - he just sets necessary number of panels and their length on the computer to produce, and the machine automatically rolls and cuts them. Therefore reducing the influence of the human factor, manufacturing errors are minimum and panels are all the same sizes and ready for further installation. SLP-1 auto click lock roll forming machine has easy width adjustment system, so to change machine from one panel width to another, the operator just needs to turn the adjustment wheel, so the readjustment takes a very short time for such operation. As additional options metal roof panel roll forming machine SLP-1 auto can have: Cutting knife to cut metal from coil at the end of the metal rolling process to reduce the amount of possible waste material; Ribbed panel rolls, to roll narrow or wide ribs in the center of the roofing snap lock panel; Microwave panel module- device to form small bends along the entire width of the roofing panel, making the appearance of the roof more interesting and eye-catching. Metal unwinder (can be floor-standing, manual console, automatic console).

Condition: new, Year of construction: 2025, Metal siding “Soffit” production line SPM-1 auto Metal siding “Soffit” production line SPM-1 auto is an excellent solution for companies with business in metal siding and metal decor elements production for various buildings and structures. Soffit profiles are very popular to arrange gables, cornices and attics, and without perforation, they can be part of cladding building facades of various configurations. Perforation holes provide additional ventilation of the under-roof space and, therefore, optimal conditions for the roofing system. Air circulation helps to avoid the formation of condensation and extra humidity, as well as corrosion of metal tiles or corrugated sheets. Metal siding Soffit SPM-1 auto is fully automatic line. This equipment can go as a separate automatic machine, consisting of a rolling mill with an automatic system and an automatic profile guillotine, or in combination with an uncoiler. The metal uncoiler can be manual for working with metal rolls up to 800 kg or automatic, with a loop converter and speed control for working with rolls up to 1500 kg. Specifications: Dimensions (mm) 6650x1200x1600 Weight, kg): 2900 Drive power rolling machine: 3 kW, 380V Dkodpfx Ajwwip Aoiwjl Drive power guillotine shears: 1.1kW Maximum thickness of sheet metal (mm.): 0.6 Forming steps number -18 Shaft diameter (mm) – 55 Rolling speed (m/min.): 10-15 Automatic roll forming soffit panels production machine SPM-1 auto makes panels with unlimited length. The machine has 18 pairs of forming rolls, providing high quality of the final products. There is special perforating module on the final stands of machine, responsible for cutting out perforation holes during roll forming. It is possible to use the machine both with and without this module, thus it is possible to obtain panels both with and without perforation, depending on the customer’s needs. We use alloy tool steel for rollers of machine and make them on high-precision CNC turning equipment, ensuring high product standards. Guillotine profile shears is at the machine exit and has electric drive to work. The electric drive of the shears is a more reliable solution compared to pneumatic or hydraulic systems for working on cutting shears of other line manufacturers. The rolling speed of the line is 10-15 meters per minute with the possibility of programmatic adjustment of this parameter. Specifications: Material width (mm) 409 The material thickness (mm) 0,4-0,6 Engine power (kW) 3 + 1,1 Rolling speed (m/min) 10-15

Condition: new, Year of construction: 2025, Automatic snap lock roof panel machine Sl-1 auto is designed by our company for the self-locking roof panels production in automatic mode. This machine forms a roof lock by rolling with the help of special rolling rolls. At the same time while rolling it cuts fastening holes for roof panel’s fixation. Automatic snap lock roof panel machine SL-1 auto consist of: - Roll forming part, which directly forms the desired profile of the panel with the help of rolling rollers. The machine is equipped with width easy adjustable system - to change the width; you just need to turn a special adjustment wheel. The rolling machine has 10 pairs of forming rolls to form a click-seam lock. It has special tool to cut fastening holes in panels. - Automatization system of machine, with the main elements as follows: automatic control panel, manual control panel, control cabinet, measuring wheel. With the help of this system, machine operator can program it to perform metal rolling and cutting operations in automatic mode. It is easy to set the number of panels for rolling and their lengths, so you just need to feed metal into machine, and it will roll panels of click-seam of the desired length and quantity in automatic mode. It is possible to perform several tasks (multi-tasking). If use manual control panel you can check each operation step of the automatic mode before put it to full automatic process. Dkedpfx Aion Hqmmowol - Guillotine shear, designed for cutting click panels of various widths. The special configuration of blades makes it possible to cut such profile and to get high quality final product. Shear system has electric motor to make cutting operations easy. As an additional equipment for the machine, we offer: - metal uncoiler for convenient installation of roll metal and feeding it into the machine. - full automatic decoiler to make roll forming process maximum automatic. - ribbed panel rolls, to form additional ribs to the click-fold panels, so it gets more interesting look to the roof and increasing the rigidity of the system. - ribbed panel forming machine RPFM (microwave panels machine) to form microwaves on roofing panels. Due to its low weight, the automatic roll forming machine for self-locking panels SL-1 auto can be used in the construction of civil and industrial facilities, in factory workshops and workshops, as well as directly on the roofing site. Using of machine close to the place of installation avoids transportation costs and the associated risk of damage to the roofing sheets. The high of snap lock roof panel profile when installed is 26mm: As an option, we can also make machine for 31mm lock high production: The maximum workpiece width for rolling can be 700mm. The minimum workpiece width is 250mm. Automatic snap lock roof panel machine Sl-1 auto has special protective cover that prevents foreign objects from getting to working part of machine. So snap lock automatic roll forming machine SL-1 auto is convenient to use with the help of automatic mode so you can minimize operator’s work and to get high-quality roofing panels with high productivity.

Condition: new, Year of construction: 2025, Dura fence metal automatic roll forming machine MPF-1 auto Dura fence metal automatic roll forming machine MPF-1 auto can be efficient solution for companies who decide to increase or start production of metal picket durafence planks. A metal picket fence is a type of profile that you can get by rolling flat metal through the rolling rollers of a machine with further use in the process of metal fences manufacturing and installation. A dura fence (euro picket fence) has an attractive look and can be perfect part of any design without cluttering it up or loading it with unnecessary elements. A dura fence will be an excellent solution for the construction of houses, cottages or any other buildings. Dura fence metal roll forming line MPF-1 is fully automatic and can proceed metal fence planks production process in fully automatic mode. The line consists of following parts Automatic metal decoiler can work with rolls weight up to 1.5 tons and coil width up to 350 mm. Decoiler helps to feed metal into a roll forming machine, so you need to install roll to unwinder shaft, to adjust inner diameter of the roll and put the metal under the compensation mechanism of the machine. After you have to take it to roll forming machine. As an option, we can also make a line and equip it with a manual metal unwinder or install a line without it at all. The rollformer part of the machine, consisting of rolling rollers of various diameters and configurations to roll metal and form the required profile. Guillotine shear for cutting final products of the machine. The guillotine works in automatic mode, giving the opportunity to cut fences with necessary length and quantity. Line automation system consist of a manual control panel, an automatic control panel and a stand with a display. The manual control panel allows you to set up the machine in manual mode and check it before automatic operation. The automatic control panel is used when the line is operating in automatic mode, allowing you to set the quantity and length of forming products and program their cutting with the line. Thus, using dura fence metal line MPF-1 auto, you can get a full automatic solution for the production of a metal fence profile, applying minimum efforts to production and receiving high-quality products with sizes and numbers you need. Specification: The material thickness maximum (mm) 0.55 Engine power (kW) 1.5+1.1+2.2 Dkodpfxjtp H Ero Aiwsl Rolling speed (m/min) 10-15

Year of construction: 2019, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: T2C100295, The T2-C bridges the gap between compact, affordable desktop label printers and costly, large-scale commercial label presses to deliver a highly flexible and productive solution for medium to large volume label production. Outfitted with cost-effective 2-liter ink tanks, the T2-C offers an ideal balance of enhanced print accuracy and reduced ink costs, resulting in notable operational savings throughout its lifespan. - Rapid print speed up to 12 inches per second (60 feet per minute) - Superior image clarity with up to 1600 dpi resolution - Adjustable print width from 2” to 8.6” - Compact footprint – occupies less than 4 square feet - The first desktop press offering the throughput and precision of a full-scale digital press - The T2-C stands as the first high-capacity, high-volume tabletop label press able to sustain precision during extended print runs. Delivering consistent, large volumes in 24/7 production, the T2-C redefines possibilities in the label printing sector. This high-output tabletop press is perfectly suited for brand owners, print shops, and small-scale label converters aspiring to diversify their portfolio with high-resolution color inkjet labels. Furthermore, the T2-C operates quietly and, thanks to its compact 4-square-foot design, integrates seamlessly into any printing facility. Additionally, the T2-C produces commercial-grade labels with exceptional print resolution of up to 1600 dpi. The adjustable print width (2” to 8.8”) enables printing of multiple labels or single oversized labels in a single print job. Most importantly, with an impressive print speed of up to 12 inches per second, users can handle extensive print runs efficiently. Key Features of the T2-C: - Straight-feed, short web path for precise printing and minimized material waste - Servo-driven web handling and tensioning system for optimal media control - Dynamic web guide with servo-controlled unwind/rewind shafts ensures precise registration, supporting full-bleed printing on pre-die cut labels and perfectly wound rolls - Advanced ink system and printhead combination extends printhead longevity and lowers ink consumption, reducing overall operating costs Dodpfx Aioyr Hx Aowekl Advanced T2-C Ink System: - Yields approximately 500,000 4" x 4" (100 mm x 100 mm) labels at 50% ink coverage - 1.5 to 3 times increased lightfastness - Significant enhancement in water resistance - Improved black (K) ink performance while reducing Cyan, Magenta, and Yellow usage - Approximately 10% lower total cost of ownership versus previous ink formulations The T2-C is an optimal desktop label printing solution, providing both business owners and users with peace of mind through the perfect fusion of ease of use, precision, print quality, and reliability. Printer Specifications: - Print Technology: Memjet Waterfall Technology - Ink Type: Dye ink, 4 individual CMYK tanks or cartridge option - Print Resolution: 1600 x 800 dpi or 1600 x 1600 dpi - Print Speed: 6 ips (150 mm/s) or 12 ips (300 mm/s) - Maximum Print Width: 8.6”

Condition: excellent (used), Year of construction: 2008, machine/vehicle number: 800425, Labelling of cardboard boxes with an Italian vignette top label and 2-sided sealing labels. The sealing of the reverse tuck-in flaps must be performed over the leading corner (right side) and over the trailing corner (left side), viewed in the product flow direction, which is from left to right. Working height: 810 mm +50 mm/-20 mm Dsdpfx Aeyr Hdreiwskl Labeller: 1 HERMA 400 PPS 8 L vignette labeller 2 HERMA 400 PPS 8 L/R seal labellers Product description: Cardboard boxes: Actual sizes (A x B x H / mm): 68 x 56 x 143, weight approx. 90 g 85 x 85 x 210, weight approx. 170 g Label specification: Label size: Vignette label: 40 x 25 mm, winding specification 5 Seal label: 15 x 25 mm Label make: Core inner diameter: 76 mm Reel outer diameter: 300 mm Winding outside

Condition: good (used), Logopak 920 IIP labeller Serial: 2040294 Dksdpfx Aieu U I A Eswsl 2004, Print and apply labelling system, high speed pallet labelling, with label and ribbon rolls of up to 1200m, up to 240 pallets per hour, touch screen controls, with manual, 3Ph

Condition: used, Combina Side labeller Dkjdpsb Uac Isfx Aiwel Model: 01-120RH Pneu Wipe Automatic side self adhesive label applicator with pneumatic wipe on arm conveyor 1250mm (l) x 250mm (w)

Condition: used, Year of construction: 2014, Overview  This pallet labeller was manufactured in 2014 by LOGOPAK. The machine is designed for applying self‑adhesive labels on pallets. It was in service until September 2025 in a complete RGB line (330 ml) and is currently stopped, still installed, with energy disconnected. The machine is available immediately and can be visited on request. Technical data  Capacity: 60 pallets/hour Application: Self-adhesive pallet labelling Regular maintenance was carried out with two maintenances per year; the last maintenance took place in January 2025 Dsdpeykz Txofx Aiwekl