Used Auto Label Dispenser for sale (7,623)

Condition: used, Year of construction: 2013, Overview Hedpfx Afoz Et Uyo Sju This KOSME FLEXA 15/720 P3 MM is a rotary labelling machine for pre-cut labels, built in 2013. It carries two wet-glue labelling stations, and a third station adds hot-melt labelling, so one machine covers several labelling tasks. It suits bottlers who work with pre-cut labels and need to switch between different labelling jobs. Bottles enter and leave the labelling carousel via infeed and outfeed starwheels, guided through the carousel by container plates and top centring bells. Brush units and side pressing belts in the outfeed area press the labels on. The machine is fully enclosed by transparent safety doors and panels and is operated from a KOSME touch panel that shows machine and production data. The machine is set up with 4 formats, covering containers from 400 to 450 g/ml, and reaches an output of up to 15,000 bottles per hour. Technical data - Manufacturer: KOSME - Model: FLEXA 15/720 P3 MM - Year of manufacture: 2013 - Machine type: rotary labeller, wet glue and hot melt - Labelling stations: 2 x wet glue, 1 x hot melt - Label feed: magazines for pre-cut labels - Formats set up: 4, covering 400-450 g/ml containers - Output: up to 15,000 bottles per hour - Dimensions (L x W): approx. 3,800 x 3,000 mm - Operating hours: 33,275 h (HMI counter) - Containers processed: approx. 302.5 million (HMI counter) Equipment - Infeed and outfeed starwheels - Container plates and top centring bells - Brush units and side pressing belts in the outfeed - Transparent safety doors and panels - KOSME touch panel with production statistics Condition Used, with normal signs of wear and glue residue from production. The machine is still installed at the operator's site in Germany and can be inspected by arrangement. Availability Available after decommissioning in week 43 of 2026 (late October 2026). Location: Germany.

Condition: good (used), Year of construction: 2010, total length: 1,600 mm, total width: 1,900 mm, total height: 3,200 mm, overall weight: 600 kg, For Sale: Hsdozv S Nmopfx Af Seu Dosing unit / flour discharge point from Kaak / Silowacht Brand: Kaak / Silowacht Type: flour discharge point Year of construction: 2010 The height is adjustable, the total height is approximately 3.20 meters. The flour discharge point can be mounted on a pole / column. Diameter of the lower filling point: 99 cm Maximum weight of flour: 100 KG Included: - weighing hopper for flour / meal - load cells - water weighing hopper unit - filter unit - pneumatic valves - level gauges - liquid yeast meter, valve and connection - Siemens S7-1500 (Siemens control system) - piping, if required It is possible to inspect this machine on-site. If you have any questions or comments, please feel free to contact us.

Condition: used, Year of construction: 2008, Zebra110pax4 label printer and pneumatic stamp. RA2315 Printer manufacturer: Zebra Printer type 110pax4 Control panel: LCD display with status display and buttons on printer, manual control panel on the side and control via PLC I/O Print type: Thermal transfer printing or direct thermal printing selectable Interfaces: Ethernet/control cable Print media: Standard media, tags and RFID media (reading and encoding of RFIF labels) Current label size: 90x36mm, applicator is designed for this size Label length min: 12.7mm Print media width: 16-114mm Ribbon width: 25.4-107mm Ribbon length max: 900m Roll size core diameter: 25.4mm Roll size maximum diameter: 101.6mm Resolution: 203 dots/inch (8 dots/mm) Dot size: 0.125mm x 0.125mm Print speed: 12 inches/second Base area: 700x700mm, with 100mm protruding control panel/compressed air maintenance unit Applicator height: 800mm lower edge Hedjux Sfzopfx Af Sou Print speed: approx. 2 seconds/label with application Electrical circuit diagram enclosed Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, Gattingerstraße 11 B & C, 97076 Würzburg, Germany

Condition: excellent (used), Year of construction: 2020, Baling press, MACFAB, – used –: Price ex works: €13,500.00 (net)! Manufacturer: MACFAB Systems Ltd Type: BMF650 Auto HT RAL - MM9.8 Year of manufacture: 01/2020 Serial number: MF J144 Weight: 1770 kg Operating hours: approx. 16h Automatic operation & "Bale ready" indicator Horizontal door that pivots to the side Surface / Color: RAL6018 Feed opening: 1,500x880x769mm (WxHxD) Dimensions, press: 2,100x1,524x3,217mm (WxDxH) Former new price: €18,921.00 Hjdpfx Afezxciis Ssu Condition: The machine was only used once for testing purposes. Available: immediately Location: 72336 Balingen

Condition: refurbished (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: AK2-SCBS201, input current: 230 A, For sale is a used ELS labeler/labeling station with a conveyor belt. The machine was acquired by us after we installed our own labeling system on our thermoforming packaging machine. The labeler was subsequently completely overhauled and tested for functionality. The system is mounted on a sturdy stainless steel/aluminum frame and features an integrated conveyor belt. The photos show labeling heads, roll holder, control panels, sensors, and mechanical adjustment options for adapting to different products or packaging. Data / Features: Manufacturer: ELS Type / Designation according to nameplate: AK2-SCBS201 Machine no. according to nameplate: 16615 / 2024 Labeling station with conveyor belt Height and position adjustment Stainless steel / aluminum construction Control panels on the labeling head Sensors included Completely overhauled Function tested Condition: used, ready for operation The machine is suitable for use in packaging lines, e.g., for labeling packaged products, trays, boxes, or similar items. Before use, the system should be adjusted to the specific product and adapted to the corresponding label format. Hsdpfx Afjzkucfs Seu Note: Technical data such as label width, label length, belt width, connection values, and exact dimensions can be requested separately if needed or checked on-site. Inspection and testing possible by appointment. Errors and prior sale excepted.

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, Complete craft beer bottling line: Cime Careddu GOLD DPS 6/6/1 rotary triblock (rinser – isobaric filler with double pre-evacuation – crown capper) and matching Compatta self-adhesive labeler. Both manufactured in 2018, installed in 2019 by Coenco (official Cime Careddu agent for the Benelux), professionally maintained, with low operating hours. Available immediately from a brewery in Dokkum, the Netherlands, due to production shutdown. 1. Triblock – Cime Careddu GOLD DPS 6/6/1 CROWN Type: rotary triblock (rinser – isobaric filler – crown capper) in stainless steel Year of manufacture: 2018 (serial no. 708) Rinser: 6 grippers, water rinse Filler: 6 isobaric (counter-pressure) filling valves with double pre-evacuation (DPS) and CO₂ pressurization for low dissolved oxygen Capper: 1 head for 26 mm crown caps, with crown feeder Capacity: approx. 1,000–1,200 bottles/hour (33 cl) Bottle formats included: [e.g. 33 cl longneck Ø 60 mm, 33 cl Steinie Ø 69 mm, 75 cl Ø 85 mm – fill in] CIP: cleaning-in-place connections for internal and external sterilization Electrical: 400 V / 50 Hz / 3-phase + N Hjdpszza Risfx Af Seu Operating hours: approx. [xxx] hours (approx. [xxx,xxx] bottles filled) CE certified, safety guarding fitted 2. Labeler – Cime Careddu / ENOS Compatta Type: linear self-adhesive labeling machine, one label station (front or wrap-around label) Year of manufacture: 2018 (serial no. 720) Capacity: up to approx. 1,800 bottles/hour Electrical: 400 V / 50 Hz / 3-phase + N Manual station adjustment, suitable for round bottles from 25 to 75 cl

Condition: used, Year of construction: 2017, Overview This SACMI KUBE 60 is a rotary self-adhesive labelling machine built in Italy in 2017. It carries six self-adhesive labelling stations and eighteen servo-driven bottle plates, and reaches a maximum output of 12,000 bottles per hour in its current configuration. Hjdpfx Afsz Durwj Sju The machine labels 750 ml glass bottles in a sparkling wine line, where it currently runs at about 5,000 bottles per hour. A LINX SL301 laser marking system is integrated for coding. Technical data - Manufacturer: SACMI - Model: KUBE 60 - Year of manufacture: 2017 - Machine type: rotary self-adhesive labeller - Maximum output: 12,000 bottles/h - Current production speed: about 5,000 bottles/h - Containers: glass bottles, 750 ml - Self-adhesive labelling stations: 6 - Bottle plates: 18, servo-driven - Electrical supply: 400 V, 3 phases + N + PE, 50 Hz - Rated current: 13 A Equipment - Six self-adhesive labelling stations with their own operator displays - Main touch-screen operator panel - LINX SL301 laser marking system for coding Condition The machine is still installed and in production and can be inspected by arrangement. Dismantling and loading are not included. Availability Available from 29 January 2027.

Year of construction: 1985, condition: used, functionality: fully functional, For sale: Auto Diesels / Dorman 12STCA diesel generator, approximately 730 kVA A powerful industrial diesel generator with a British Dorman 12STCA V12 diesel engine is for sale. This is a heavy-duty industrial generator set designed for electricity generation in industrial facilities, factories, construction sites, as a backup power source, or in other locations where high electrical power is required. Key specifications: Manufacturer/Assembler: Auto Diesels Engine: Dorman 12STCA Engine Type: V12 Diesel Speed: 1500 rpm Frequency: 50 Hz Hsdpfx Aez Du D Tjf Seu Generator: AC, 3-phase Voltage: Approximately 400/415 V Generator Power: Approximately 730 kVA Engine Power: Approximately 500 kW class Engine Serial No.: 12132/0785/005 Engine Manufacturer: Dorman Diesels, Stafford, England Generator Manufacturer: Auto Diesels, Uxbridge, Middlesex, U.K. Operating Mode: S1 Ambient temperature according to generator plate: 40 °C The Dorman 12STCA was used in high-power industrial generators; documented 12STCA units in the 800–1000 kVA class are available on the market, so this unit belongs to the same heavy-duty industrial category. Package includes: Auto Diesels / Dorman 12STCA generator Dorman 12STCA V12 diesel engine Generator head / alternator Fuel tank Exhaust system Muffler Engine and generator control/starting equipment Main generator frame / platform Auxiliary equipment related to the generator The fuel tank and muffler are included in the package.

Condition: good (used), Mirus Anleger printing machine, in working order. Hjdpfxeud Awvs Af Ssu

Condition: used, Year of construction: 2017, functionality: fully functional, machine/vehicle number: SNDE106744, input voltage: 400 V, input frequency: 50 Hz, Vacuum casting system was used to cast epoxy resin into plastic housings Hodpfxevnrz De Af Sju

Year of construction: 2010, condition: good (used), 1 x Ravenwood Nobac500 Labeller Serial Number: 0540 Hjdpfx Aoz Ehgkjf Ssu

Condition: excellent (used), Year of construction: 1996, functionality: fully functional, NEWFOIL 2000 MKII year 1996 web with 125mm Max. printing area 125x150mm Hjdpfx Ajyrzzfsf Seu Max. die cutting area 125x150mm Speed 6000 cycles Re-register cell can use 2-foils unwind rewind

Condition: good (used), Ram punch AMC Hydromatic 220 Label die cutter A professional machine made in Italy. Hsdpfoz Dtbwjx Af Seu AMC is a world leader in the production of label die-cutting machines. Very good condition. The machine is 100% functional and ready for production. This is the model currently in production. Technical specifications: Maximum format: 220 x 220 mm Number of cycles: 18/min Productivity: 900,000 sheets/h Weight: 700 kg The machine is equipped with a hydraulic quick-action unit. Photo safety barriers. Adjustable feed table in all directions. Two operating modes: semi-automatic and manual. Tail on the delivery.

Year of construction: 2026, condition: new, functionality: fully functional, Make best 3D effects using simple and modern screen printing technology connected with a hot rotary cylinder. High build varnish, high build metallic silk foils, different special colors and effects. 1. Screen unit + heated cylinder with foil unwinding/rewinding 2. Machine works in roll to roll mode 3. Maximum web width 350mm or 450mm depending on the model 3. UV curing or LED curing 4. Configure this machine as you want. 5. New machine with a warranty If to make the screen plate with laser technology then you can almost consider this machine as a digital embellishment machine. Hedpfsz Hwfxjx Af Seu Very effective machine with reasonable price. Welcome to our demoroom in Poland, near Copernicus Airport Wroclaw

Condition: used, Year of construction: 2023, Overview This Gernep Soluta 6-720 2SK SD is a rotary self-adhesive labelling machine built in 2023. It carries two self-adhesive labelling stations on a 720 mm container table with twelve servo-driven bottle plates, and runs at a rated output of 11,000 bottles per hour with an adjustable range of 2,000 to 12,000 bottles per hour. Containers are fed in through a single infeed worm and an eight-division star, held on servo-driven bottle plates while the labels are applied, and discharged through the same star pitch. Height adjustment is electric, the labelling stations and the bottle-plate drive are servo-controlled, and the machine is operated from a touch panel with a free-standing control cabinet. Broken-container detection is fitted, and a VPN router for remote maintenance is installed. Technical data - Manufacturer: Gernep - Model: Soluta 6-720 2SK SD - Year of manufacture: 2023 - Machine type: rotary self-adhesive labeller - Rated output: 11,000 bottles/h - Adjustable range: 2,000 - 12,000 bottles/h - Container table diameter: 720 mm - Container plates: 12 - Pitch: 188.4 mm - Infeed/discharge star: 480 mm diameter, 8 divisions - Self-adhesive labelling stations: 2 - Labelling station drive: servo - Container plate drive: servo - Main drive: asynchronous - Infeed worm: single worm, mechanical drive - Height adjustment: electric - Running direction: left-hand machine - Installation variant: linear - Pneumatics: Festo Bottle formats Built for two glass bottle formats, each at 11,000 bottles per hour: - Glass bottle, 250 mm high, 75 mm diameter - Glass bottle, 215 mm high, 65 mm diameter - Labels on both formats: paper body label 110 x 75 mm, paper back label 50 x 75 mm Equipment - Two self-adhesive labelling stations - Touch panel operation, free-standing control cabinet, swivel arm - Frequency converter - Broken-container detection - Remote maintenance including VPN router - Prepared for dating and coding - Prepared for optical orientation - Format parts included: one infeed worm, one infeed/discharge star, one set of container plates, one set of centring bells Not fitted: label inspection, mechanical orientation. Hedpfoz Dimpjx Af Sju Condition The machine is set up and under power and can be inspected by arrangement. Availability Immediately available.

Condition: used, Year of construction: 2023, Offered for sale is a self-adhesive labeling machine. Nominal output: 11000bottles/h, reference circle diameter: 720mm, control range: 2000 to 12000bottles/h, number of container plates: 12, pitch: 188.4mm, starwheel diameter: 480mm, starwheel pitch: 8, number of self-adhesive labeling stations: 2, direction of operation: left-hand machine, control: touch panel. Equipped with infeed screw 1x, infeed/outfeed starwheel 1x, bottle plates 1 set, centering hoods 1 set, swivel arm, free-standing control cabinet. Inspection possible by appointment. Hjdpfjzzdybox Af Seu

Condition: used, Year of construction: 2023, Labelling machine for the cold-glue application of paper front, back and belly labels onto glass bottles. Equipped with a Domino CO₂ laser for label marking. The labelling machine was upgraded in 2023 with a mechanical overhaul and a refurbishment of the electrical systems. Additional title: cold glue labeling Capacity appr.: 60000 bo/h Hodozu Rzlepfx Af Seu Current: 32 A Voltage: 400 / 230 V Frequency: 50 Hz Formats: 0.5 l Longneck Operation / Control: Simatic S7-1500 Position: in stainless steel housing on feet Base construction: carousel-type machine Features: label magazines; glue pumps; safety doors; control cabinet; operator terminal with visualisation

Condition: used, Year of construction: 2020, Overview Krones Ergomodul modular container labeller. Containers run anticlockwise after the infeed in a frontal arrangement with two discharge starwheels. Finish RAL 9018 papyrus white in the wet-line section. Two docking positions at the carrousel, both in operation, accept the four labelling stations without tools, so cold-glue and self-adhesive labelling run on the same carrousel; height adjustment of the top part and each station is motorised with container type preselection. Technical data - Manufacturer: Krones - Model: Ergomodul - Year of manufacture: 2020 - Table pitch diameter: 1,200 mm - Rotary plates: 30 - Machine pitch: 125.6 mm - Main drive: controlled servo motor; Danfoss servo motors, container table - Cold-glue stations (2x): ERGOMATIC-CL, 8-shaft glue pallet carrousel, 8-section gripper cylinder d = 350 mm, unwinding length 40-130 mm, steel glue roller, integrated glue pump, gluing height 5-215 mm, housing stainless steel, AISI 304-similar - Self-adhesive stations (2x): AUTOCOL-TS 120, web speed 120 m/min, supply tolerance +/- 0.5 mm, four-axis stand (application height, container diameter, conicity, sloping position), two-reel holder with automatic splicing and end-of-reel detection, driven carrier-film rewinder, ionisation unit, reels up to 390 mm outer diameter, carrier film up to 150 mm - Container infeed: worm with servo drive; detects damaged and fallen-over containers - Container orientation: prepared for camera orientation at the carrousel (360-degree monitoring, one camera); electrical interface prepared, mechanical adjustment unit not installed - Coding: prepared for a laser coder at the carrousel, with laser guarding, safety switch, clock pulse, oil-free air supply - Conveyors: flat-top chain, 83.8 mm wide, stainless steel (AISI 304-similar); servo-driven infeed, PM-motor discharge, centralised frequency inverter control - Machine guarding: lifting doors at the carrousel (polycarbonate), hinged doors at the front table (tempered safety glass) - Pneumatics: Festo; Bosch-Aventics, Norgren Herion, SMC, Bürkert components - Electrical: 400/230 V, AC 3/N/PE, 50 Hz, 28 A full load, 50 A back-up fuse; UPS 400/230 V, 17 A - Media: 92.4 m³/h oil-free compressed air, 0.009 m³/h process water - Weight: approx. 10,600 kg total (carrousel 3,200 kg, front table 3,000 kg, 1,100 kg per cold-glue station, control cabinet 1,000 kg) Hodpfx Ajzzz N Hef Sju Equipment - 2x ERGOMATIC-CL cold-glue labelling stations, interchangeable - 2x AUTOCOL-TS self-adhesive labelling stations, interchangeable - Stand-alone control cabinet with Krones iPanel operator terminal - Central lubrication (Lincoln progressive distributor with motor pump) - Ecopush rejection module - Handling parts set on trolleys The inspection unit (Checkmat) and the container coding device used with this labeller are not part of this machine. Condition Used, still installed and under power in an operating line; on-site inspection possible before purchase. Availability Available now. The machine is in Belgium and will be dismantled and moved to our location in Germany; dismantling, loading and transport quoted on request.

Condition: excellent (used), Manufacturer: MORETTO S.P.A. -type: Hopper Loader; Serial.: 1302868; Model: F3F40 -electrical data: 230V; 50/60Hz; 1kW -capacity: 50dm3/h -weight: 11 kg Hodpfjt H Ndpsx Af Ssu

Condition: used, Year of construction: 2011, Automatic labeling machine for glass bottles Manufacturer/Model: Makro MAK-1 4P Ua2 L2 Version with 2 self-adhesive labeling units MAK-A50 Suitable for front label and back label Output: up to approx. 3,000–3,500 bottles/hour Container diameter: 40–130 mm, container height: 140–380 mm Label length: 10–195 mm, label height: 10–180 mm Stainless steel version AISI 304, safety enclosure in accordance with CE PLC control with touch-screen display Automatic speed regulation and electric head height adjustment Optical orientation via sensors, plate rotation via stepper motors Installed power: approx. 4 kW Technical data: working direction: left-right, clockwise capacity bph max.: 4500 labels: self adhesive labels number of labelling stations: 2 number of bottle plates: 4 orientation: bottle plate with stepper motor, optical orientation using a photocell bottle diamater max (mm): 130 Hodpfxez Abkaj Af Sou bottle diamater min (mm): 40 bottle height max (mm): 380 bottle height min (mm): 140 motor height adjustment: yes speed adjusment: frequence converter

Condition: refurbished (used), Year of construction: 2013, functionality: fully functional, PAGO System L600 Pharmaceutical Labeling Machine | Extensively modernized | GMP | Immediately available Manufacturer: PAGO Etikettiersysteme GmbH (Fuji Seal) Model: System L600 Year of manufacture: 2013 For sale is a high-quality PAGO System L600 labeling machine for the pharmaceutical industry. The machine is suitable for labeling vials, injection bottles, and other cylindrical containers in a GMP environment. The machine was already upgraded and modernized at the factory in 2018 to handle additional product formats. Hedpfxszpzbfe Af Sou In 2022, we purchased the machine used and immediately took it to the manufacturer, Fuji Seal / PAGO Germany. There, it was completely inspected, serviced, and extensively modernized. Investments of €60,200 were made in these measures. Before delivery, a complete Factory Acceptance Test (FAT) was carried out at the Fuji Seal factory. The machine is in very good technical condition and is ready for immediate use. Equipment Laetus/Keyence vision system for print and code inspection New Allen / Novexx thermal transfer printer Siemens PLC control Touchscreen operation Unwinding station Outfeed station Servo drives Stainless steel GMP design Complete protective enclosure Original documentation Technical data Output up to 120 products/min For vials and injection bottles GMP-compliant design Year of manufacture 2013 Manufacturer: PAGO Etikettiersysteme GmbH Why is the machine being sold? For our new pharmaceutical CMO plant, we have purchased two new labeling machines. Due to space limitations, this machine is no longer needed. Advantages Extensive modernization by Fuji Seal / PAGO Documented investment of €60,200 Factory upgrade already in 2018 Complete FAT at the manufacturer Very well-maintained condition Immediately available Significantly cheaper than a new machine A comparable PAGO/Fuji Seal pharmaceutical labeling machine costs over €450,000 in 2026, depending on the equipment and automation. Inspection is possible at any time by appointment. We will gladly send you further photos, videos, and technical documentation upon request.

Condition: used, Year of construction: 2022, All-around labeling machine 132M HC Machine running direction: from left to right, as viewed from the operator side. Machine structure, machine number 837121: - All-around labeling of cylindrical glass vials - Includes printing system and camera control - Working height: 850 – 1,000 mm Hodpjzr Uvzofx Af Ssu - Machine length: approx. 4,665 mm - Rotary table - Format sets for 2R vials Further information available upon request. Additional demonstration machines are regularly available in our standard range. We would also be happy to invite you to our showroom to learn about the machines during a visit or live demonstration. Please feel free to bring your own products so that we can demonstrate the application in a practical way under your individual conditions.

Condition: ready for operation (used), Year of construction: 1979, A wet glue rotary labeling machine Krones for bottles is available. Bottle formats: 1l/0.75l. Including various format parts and variable label magazine. An on-site inspection is possible. Hedpfx Ajy Eg Ekef Ssu

Condition: like new (used), Year of construction: 2026, functionality: fully functional, machine/vehicle number: 837192, total width: 1,300 mm, total length: 2,110 mm, total height: 1,500 mm, outer diameter of label roll: 300 mm, inside diameter of label roll: 76 mm, input voltage: 230 V, All-around labeling machine 152C Machine running direction from left to right, viewed from the operator side - Aluminum frame + plate - Machine is mobile - Equipped with the HERMA 500 labeling unit - Printer integration possible after technical evaluation - Product diameter possible after technical evaluation from 20-100 mm Hedjziygtjpfx Af Sou - Roll separator diameter 100 mm - Belt conveyor belt length approx. 1,540 mm, width 100 mm with a conveyor belt that can handle accumulating products - Lockable main switch with emergency stop function mounted on the top of the base frame Further information available upon request. Additional demonstration machines are regularly available in our standard range. We would also be pleased to invite you to our showroom to familiarize yourself with the machines during a visit or live demonstration. Please feel free to bring your own products so that we can demonstrate the application in a practical manner under your individual conditions.

Condition: used, Year of construction: 2011, Cold glue labelling machine for applying paper labels to glass bottles. Additional title: Neck-, body- and back-labeling for bottles Capacity: 4500 bottles/h Power: 6 kW Voltage: 400 Volt Frequency: 50 Hz Compressed air: 6 bar; 120 l/min Hedpfxoztwyxs Af Sju Formats: 0.33 l longneck, 0.5 l Euro, crown cap, and 0.5 l, 0.75 l swing-top bottles Running direction: from right to left Operation / Control: Control cabinet with control buttons, automation with Siemens Simatic S7-300