Band Saw

MEBA - Vollautomat ECO 335 A

Condition: new, weight max. 5,0 t workpiece diameter 100 - 2500 mm total power requirement 2 x 0,37 kW load capacity drive unit max. 2500 kg load capacity rotating unit max. 2500 kg table turning speeds 100 - 1000 mm/min diameter of running wheel 250 x 140 mm weight of the machine ca. 0,9 t Incl. double foot pedal (start-stop / left-right) Incl. remote control (on the cable) Pgedpogvwgcjfx Angsu

Condition: good (used), Year of construction: 2000, machine/vehicle number: 6535, Offer 25230 Hydraulic Twin-Column Guided Bandsaw Machine Technical Specifications: - Automatic operating cycle for the cutting process, hydraulic lifting/lowering of the saw frame - Manual mitre adjustment with hydraulic clamping - Automatic material feed unit, motorized mitre adjustment - Saw blade dimensions: 4400 x 34 x 1.1 mm - Infinitely variable cutting speed: 15 – 150 m/min - Infinitely adjustable cutting pressure: 10 – 15 bar - Feed rate: 0 – 300 mm/min - Cutting range at 90° Psdpfx Asw I Scfsngegu – Max round: 335 mm – Max square/flat: 500 x 335 mm - Automatic material feed: 5 – 2300 mm - Drive: 400 V / 6.5 kW - Space requirement (approx.): W 2400 x H 1950 x D 2200 mm - Weight (approx.): 1800 kg

Condition: good (used), functionality: fully functional, Year of construction: 2015, Four-Roller Plate Rolling Machine Manufacturer: FACCIN Model: 4HEL 2122 Year: 2015 Technical Specifications Brand: FACCIN Model: 4HEL 2122 Year of manufacture: 2015 Working width: 2050 mm Roll geometry: Linear guides Top roll diameter: 225 mm Bottom roll diameter: 210 mm Side roll diameter: 165 mm Bending force against top roll: 100 t Motor power: 9 kW Dimensions (approx.): L 3.50 x W 1.20 x H 1.10 m Weight (approx.): 4,200 kg Performance Psdpfxozguumj Angsgu Rolling capacity (full working width): 12 mm Pre-bending capacity (full working width): 8 mm From tube diameter: 1,125 mm With yield strength: 260 N/mm² Rolling capacity (full working width): 8 mm Pre-bending capacity (full working width): 6 mm From tube diameter: 295 mm With yield strength: 260 N/mm² Rolling capacity (full working width): 8 mm Pre-bending capacity (full working width): 6 mm From tube diameter: 1,125 mm With yield strength: 360 N/mm² Rolling capacity (full working width): 6.5 mm Pre-bending capacity (full working width): 5 mm From tube diameter: 295 mm With yield strength: 360 N/mm² Rolling capacity (half working width): 15 mm Pre-bending capacity (half working width): 10 mm From tube diameter: 1,125 mm With yield strength: 260 N/mm² Equipment - Double linear guide system for roller movement - Extra wide bearing blocks - MCS double bearing system for roll rotation - Extra heavy-duty, doubly supported drop end bearing - Electronic parallelism system (EPS) - Hardened rolls for maximum wear protection and reduced sheet damage - All rolls polished after heat treatment - SIEMENS S7 PLC touch control - Safety cable with emergency stop and CE certification - Water cooler for hydraulic unit All details without guarantee. A live demonstration under power is possible at any time in our showroom.

Condition: new, Year of construction: 2024, operating hours: 50 h, machine/vehicle number: 305, Available: February 2023 Control: Osai X-axis: approx. 3,100 mm Y-axis: approx. 2,100 mm Z-axis: approx. 1,000 mm A-axis: ± 115° Pgedswwq Hcspfx Angju C-axis: ± 360° Clamping table Clamping surface: approx. 3,100 x 2,100 x 213 mm Aluminum with T-slots across every 250 mm Max load: 1000kg distributed over the entire surface 2-axis milling head ST7 Spindle power: 10 kW Spindle speed: max. 24,000 min-1 Torque: 15.3 Nm Tool holder: HSK 63F Tool clamping: pneumatic Blowing air / MMS: outside Drives linear axes Feed speed X and Y axes: up to 50 m/min Z-axis feed rate: up to 30 m/min Color Housing, portal, control cabinet: light gray Z-slider and milling head: orange Additional equipment - 15-way tool changer - Control in a separate, rollable desk

Condition: new, Year of construction: 2024, Protec KT 10000 welding positioner Complete set with hand-held remote control 10,000 kg load capacity Diameter of the clamping plate: 2000 mm Height when tilted: up to 1600 mm to the center Height in horizontal position: 1920 mm Speed: continuously adjustable from 0.01 to approximately 0.35 RPM (higher speeds possible) Pgsdeid Szvjpfx Angeu Tilting angle: up to 120° Length: 2800 mm Width: 1920 mm Foot pedal remote control available at an additional cost of €390.

Condition: ready for operation (used), Graziano parallel lathe, model SAG 210, center height 210 mm, distance between centers 1500 mm, maximum swing over cross slide 268 mm, maximum swing in the natural gap 580 mm. Bed width 320 mm, spindle bore 57 mm, spindle nose CAM-LOCK type D1-6", 24 spindle speeds, rpm from 38 to 2000. Machine weight 2200 kg. Dimensions (mm): 3095x1030xh1450. Pgodpfoy N S H Isx Angsu

Condition: used, Year of construction: 2008, functionality: fully functional, overall weight: 420 kg, iDEAL BAS 065-11 is a resistance butt welding machine for band saw blades, made in Germany by IDEAL-Werk C.+E. Jungeblodt GmbH + Co., Lippstadt. Serial no. 235529, year of manufacture 2008. Rated power 20 kVA at 50% duty cycle, primary voltage 400 V, 50/60 Hz, secondary voltage 2.5 – 4.0 V, maximum upsetting force 50 kN. Hydraulic clamping (the "-11" version): both clamping jaws are operated hydraulically by foot switch, so the operator keeps both hands free to position the blade. The hydraulic power unit with clamping pressure gauge is mounted on the machine. Welding current is selected with the step switch, flashing speed and annealing time are set on the front control panel, with a Panasonic timer for the annealing cycle. A flexible work light is fitted above the welding zone. Capacity: bi-metal band saw blades 10 x 0.7 – 41 x 1.6 mm, wood band saw blades 10 x 0.7 – 60 x 1.0 mm, stainless steel band saw blades 10 x 0.4 – 35 x 0.8 mm, band knives 10 x 0.4 – 40 x 0.8 mm, strip steel 7 – 100 mm2 cross-section (stainless up to 50 mm2), band thickness 0.4 – 2.5 mm, clamping width 60 mm. The machine is used, in working condition and repainted. Electrical cabinet, hydraulics and controls are shown in the photographs. Machine weight approx. 420 kg net / 480 kg gross, packing dimensions approx. 1150 x 1150 x 1150 mm. Make and Model: iDEAL BAS 065-11 Year of manufacture: 2008 Serial no.: 235529 Clamping: hydraulic, foot switch operation Max. upsetting force: 50 kN Voltage: 400 V Frequency: 50/60 Hz Power: 20 kVA (at 50% duty cycle) Secondary voltage: 2.5 – 4.0 V Fuse protection: 20 A Bi-metal band saw blades: 10 × 0.7 – 41 × 1.6 mm Wood band saw blades: 10 × 0.7 – 60 × 1.0 mm Stainless steel band saw blades: 10 × 0.4 – 35 × 0.8 mm Band knives: 10 × 0.4 – 40 × 0.8 mm Strip steel, cross-section: 7 – 100 mm² (stainless up to 50 mm²) Band thickness: 0.4 – 2.5 mm Clamping width: 60 mm Pedpfxezz Sdzs Angjgu Machine weight: approx. 420 kg net / 480 kg gross Packing dimensions: approx. 1150 × 1150 × 1150 mm Condition: Used, in working order

Condition: used, Year of construction: 2015, turning diameter 250 mm turning length 600 mm control FANUC Series 31i-Model A total power requirement 23 kW weight of the machine ca. 7,7 t dimensions of the machine ca. 2.880 x 2.130 x 1.990 mm m Pgodpfx Ajy Ralnsngsu

Condition: used, Year of construction: 1997, pressure 225 t chamfer lenght 3050 mm distance between columns 2550 mm column arm 300 mm ajustment speed 110 mm/sec work speed 9.0 mm/sec return speed 130 mm/sec work stroke 240 mm dayligth 320 - 560 mm Pgodpexaa Dtofx Angju table height 1000 mm table width 200 mm oil volume 350 ltr. operating pressure max. 296 bar air pressure 4.5 - 6.0 bar voltage 400 Volt total power requirement 18.5 kW weight 14900 kg range L-W-H 5180 x 2400 x 3100 mm - in checked condition - machine video - ?v=ebbbzSYMxKw Furnishing: - electro-hydraulic CNC die bending/press brake - CYBELEC CNC control "ModEva 12S", swiveling at the front right * High-resolution graphic color screen 14 inches * Representation as a line, area or volume drawing of the product * Clear, concise menus in the operator's language * Large tools and products library - CNC-controlled back gauge adjustment (X-axis) * Stop range X axis of bending line .. 5.0 - 1.000 mm * Adjustment speed .. max. 250 mm/sec. - CNC-controlled vertical adjustment of the stop fingers (R axis) * Adjustment range of table surface .. 115 - 265 mm * Adjustment speed .. max. 100 mm/sec. * Adjustment via SERVO motors - CNC-controlled adjustment of the stop fingers left-right (Z1+Z2 axis) * Adjustment range Z1 .. 405 - 2565 mm * Adjustment range Z2 .. 485 - 2645 mm * Adjustment speed .. max. 1000 mm/sec. - WILA CNC-controlled electric table crowning - pneumatic EHT upper tool clamping - manual lower tool clamping - 1x freely movable 2 hand/foot control - 2x front, movable support arms - rear protective device (sliding protective grille) - side protection device (pivoting protective grille) - 1x set of EHT deer foot upper tool - split (not complete) - 1x set of EHT lower tools - split (3.000 mm) - original operating instructions (machine + control)

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, operating hours: 3,000 h, number of axes: 5, number of slots in tool magazine: 24, We are offering this well-maintained, young COSMEC 5-axis CNC milling machine, model CONQUEST 515, from 2021. The machine is currently in production and operates on a single-shift basis. It can be inspected and tested while powered on. - Training/instruction for your employees can be provided at our facility before the machine is disassembled. - Year of manufacture: 2021, commissioning date: 05/2021 - Work table: 4000mm x 1500mm - OSAI control system - 24-position tool changer (2 disks with 12 tools each) - Portal clearance: 500mm - 5-axis swivel head: 18KW, 500 - 24,000 RPM - NC-controlled extraction hood - Bumper safety system - Control cabinet with air conditioning unit - Mobile control panel - Central lubrication system - Vacuum pump: 250 m³/h - Approximately 24 HSK63F tool holders - Automatic tool length measurement - Nesting table - Nesting CNC milling machine - Swivel machining is possible The price is "Ex Works". We will gladly assist with disassembly and loading. Similar to Reichenbacher Vision or Homag CNC. Pgodjzukurjpfx Angou If you have any questions or would like to arrange a viewing, please feel free to contact me by phone or email.