Used Atos for sale (396)

Condition: used, Programmable AC power source voltage regulator Laboratory Power Supply, Power Supply, Programmable AC Power Source CHROMA Type 6415 : 64150296 Year of manufacture approx. 2000 Input values - Input voltage: 190 ~ 250 Volt AC Input frequency: 47-63 Hz Input current: max. 12 Amp. Output values- Output voltage range: 0 to 150 VAC / 0 to 300 VAC Max. Output current: 15 A / 7.5 A Output power: 1500 VA Efficiency 80% Number of output phases: 1 Accuracy: 0.2% + 0.2% of F.S. Resolution: 0.1V Distortion: 0.5% for frequencies 45 - 500 Hz 1.0% for frequencies >500 - 1 kHz Line regulation: 0.1% Load regulation 0.1% Output frequency: 45 - 1000 Hz. Accuracy: 0.1 Resolution: 0.1Hz Measurement: V, F, I, P, PF, CF MAIN FUNCTIONS: - High measurement accuracy for RMS voltage, RMS current, active power, frequency, power factor and current crest factor - Built-in power factor correction circuit - Programmable current limiting - Integrated output cut-off relays - EEPROM memory for user-defined voltage and frequency combination for instant recall at any time - Optional GPIB, RS-232 and analog programming interface - Over voltage, under voltage, over power, over current, over temperature and short circuit protection - Temperature-controlled fan speed - Self-test when switching on - Supplied as shown, without additional accessories and connection cable Additional connections: - BNC (EXT VREF) - 9 Pol. D-Sub (RS-232C interface) Dusdpfxsdz Sras Aaaep - 24 Pol. Centronic (GPIB) Space requirement H x W x D 221.5 x 425 x 567 mm Weight: 23 kg good condition

Condition: used, Programmable AC power source voltage regulator Laboratory power supply, power supply, Programmable AC Power Source CHROMA Type 6415 : 641500000 363 Year of manufacture approx. 2000 Input values - Input voltage: 190 ~ 250 Volt AC Input frequency: 47-63 Hz Input current: max. 12 Amp. Output values - Output voltage range: 0 to 150 VAC / 0 to 300 VAC Max. output current: 15 A / 7.5 A Output power: 1500 VA Efficiency 80% Number of output phases: 1 Accuracy: 0.2% + 0.2% of F.S. Resolution: 0.1V Distortion: 0.5% for frequencies 45 - 500 Hz 1.0% for frequencies >500 - 1 kHz Line regulation: 0.1% Load regulation 0.1% Output frequency: 45 - 1000 Hz. Accuracy: 0.1 Resolution: 0.1Hz Measurement: V, F, I, P, PF, CF MAIN FEATURES: - High measurement accuracy for RMS voltage, RMS current, active power, frequency, power factor and current crest factor - Built-in power factor correction circuit - Programmable current limit - Integrated output isolation relays - EEPROM memory for user-defined voltage and frequency combination for immediate recall at any time - Optional GPIB, RS-232 and analog programming interface - Overvoltage, undervoltage, overpower, overcurrent, overtemperature and short circuit protection - Temperature controlled fan speed - Self-test when switched on Additional connections: - 9-pin D-Sub (Trigger In, AC On, etc.) - 25-pin D-Sub (printer) Dedpfx Ajdz Srbjaajup - BNC (EXT VREF) - 9-pin D-Sub (RS-232C interface) - 24-pin Centronic (GPIB) - 25-pin D-Sub (System I/O) - 3x BNC (Sync / Clock / VREF) - Manual in PDF format Space required H x W x D 221.5 x 425 x 567 mm Weight: 23 kg good condition 2 pieces available, price per piece

Condition: ready for operation (used), A vibratory finishing trough Trowal for the aging of parquet strips is available. Maximum product length: 2400mm. An on-site inspection is possible. Dodpfxoynlt Do Aaaeup

Condition: like new (used), functionality: fully functional, Stainless steel tomato reception tank with 2 water guns. Length: 16 m Duodpfxeynkmpo Aaaep

Condition: used, machine/vehicle number: 2405, functionality: unexamined, input voltage: 200 V, input frequency: 50 Hz, rotational speed (max.): 14,000 rpm, Used Hettich Mikro 200R Centrifuge with cooling. Dodpjynhwxofx Aaasup Model: Mikro 200R Manufacturer: Hettich Zentrifugen Capacity: 24 tubes Max RPM: 14,000 Voltage: 200-240 V (50Hz) | 1.8A

Condition: good (used), Stainless vibratory conveyor, internal dimensions 1800mm x 650mm, hopper height 1550mm, discharge height 850mm, 3Ph Dusdjfhdwaepfx Aaasp

Condition: like new (used), Eillert C25 H Potato rumbler Duedpfehpqyksx Aaasp Stainless, 25Kg capacity, suitable for potatoes, carrots and other root veg, 3Ph

Condition: good (used), FMC vibratory conveyor Model: VF10 Dusded Thbvopfx Aaaop Serial: 1540 Stainless vibratory conveyor, variable speed, internal dimensions 1800mm x 1100mm, discharge height 1000mm,

Condition: used, Używany mieszalnik dwuwałowy łopatowy produkcji Alco Food Machines (DE) model AMP 300-S o całkowitej pojemności komory 330 l. Pojemność robocza ok. 230 l. Komora mieszania ma wymiary wewnętrzne D 900 mm x S 805 mm x G 535 mm. Góra otwarta. Mieszalnik posiada dwa wały mieszające, każdy napędzany przez przekładnię silnikiem elektrycznym o mocy 0,9/1,5 kW, 705/1415 obr/min, 380/400V, 50 Hz. Każdy wał jest wyposażony w dwie pół-wstęgi i siedem łopat. Rozładunek przez dwa otwory rozładunkowe w ścianie frontowej, każdy wyposażony w klapę ze stali ko, sterowaną pneumatycznie. Maszyna jest zamontowana na czterech nogach ze stali ko i posiada lokalny panel sterowania. Ostatnio pracowała w przemyśle spożywczym. Dedpjykpaajfx Aaajup

Year of construction: 2025, operating hours: 50 h, condition: like new (used), functionality: fully functional, DSC 300 Caliris® Select - Dostosowany do potrzeb użytkownika Dujdpfjymd Iqex Aaasp W Select wersji DSC 300 Caliris®istnieje możliwość wyboru pomiędzy trzema aktualnie dostępnymi modułami. Maksymalny zakres temperatur dostępny w DSC 300 Caliris® Select wynosi od -170°C do 650°C. Wersja Select umożliwia wymianę modułów tego samego typu, co pozwala uniknąć przestojów urządzenia. Posiada zintegrowany kolorowy wyświetlacz dotykowy, pasek stanu LED i może być opcjonalnie wyposażony w automatyczny podajnik próbek. DSC 300 Caliris® Select to kompleksowe, niezawodne i wszechstronne urządzenie DSC do charakteryzacji materiałów, dostosowane do indywidualnych zastosowań. Niezależnie od tego, czy chodzi o badaniaarch & development, kontrolę jakości, testy kontraktowe czy specyfikację materiałów do określonych zastosowań, ważne są informacje o zachowaniu materiału w zmiennej temperaturze i różnych atmosferach. DSC 300 Caliris® może w tym pomóc: Identyfikację materiału Optymalizację procesu Kontrola jakości Diagramy fazowe Analiza kinetyczna Kompatybilność

Condition: excellent (used), For sale: Complete set of ATORN Germany tool holders – high quality, premium brand Hahn+Kolb. Technical specifications: • Manufacturer: ATORN • Model: 20723200 • Standard: DIN 69871 SK40-1/10-100 • Length: 100 mm • Set includes: several pieces, some with mounted drills (see photos) Condition: Very good, practically stored as new. Only used for testing, no operational wear. Suitable for CNC machining centers and milling machines. Dujdpfsw Ulrajx Aaasp - Price per piece.

Condition: used, THERMATOOL HF welder CFI 200KW In excellent working conditions. Solid State HF welder: CFI200 Dujdpfsymad Ijx Aaasp Output power: 200 kW Welding frequency: 400 KHz Scope of supply - DC Power cabinet - HF cabinet with auto-match system and output busbar to coil holder - Single axis adjustment table - Operator HMI diagnostic system/controls - Closed loop Water cooling pump/heat exchanger - Spare electrical cards x 12 - Spare thyristors/power supplies(4) / spare auto-match drive belts - Approximately 40-45 induction coils in various sizes to suit tube range 19-89mm Solid State HF welder: CFI200 Output power: 200 kW Welding frequency: 400 KHz

Year of construction: 2007, condition: used, THERMATOOL High Frequency Welding CFI 350 kW VF Fully revised in 2025 by Thermatool specialists Djdsymadbspfx Aaajup Technical specifications Output power: 350 kW Welding frequency: 180 - 300 KHz Input voltage: 380 VAC / 50 Hz Total installed power 525 kVA Output power: 350 kW Welding-frequency: 180 - 300 KHz Input Voltage : 380 VAC / 50 Hz Total installed power: 525 kVA

Condition: used, Tube mill OTO 101.3 Manufacturers: OTO MILLS, SEUTHE & THERMATOOL The line is in operation and inspection during production is possible. The line is complete with: - OTO MILLS Entry line with Double uncoiler, Strip joiner & Strip accumulator - CANTI-SAG Forming, Sizing line & Turks heads TWL RS90 - THERMATOOL HF welder CFI 300kW - SEUTHE Flying saw TS90 - ATTL Automatic packaging unit - ITIPACK Strapping unit - OSU Metallization Technical data: - Diameter range: 32 – 101 mm - Squares: 20 x 20 - 70 x 70 mm - Rectangular: 40 x 20 - 80 x 50 mm - Thickness: 0.8 – 3.0 mm - Tube Length: 4 – 10 m - Voltage: 380 / 50 VAC / Hz - Direction: Left - Right - Material: Carbon steel – Hot rolled, pickled, galvanised, cold rolled - Tensile: 330 – 520 N/mm2 - Coil Weight: 2x6.000 Kg - Coil Width: 50 – 250 mm - Coil ID: 508 – 610 mm - Coil OD: 1100 – 2000 mm Scope of supply: 1. Entry line OTO MILLS with Double uncoiler, Strip joiner & Strip accumulator 2. Forming, Sizing line & Turks heads 3. THERMATOOL 300kW welder Dodpfx Ajyl Uicsaaeup 4. Fume exhaust system 5. Cooling tunnel 6. Detwister unit 7. Flying saw Seuthe 8. Roll way 9. Automatic packaging machine 10. Itipack strapping machine 11. Electrical System 12. Pneumatic System 13. Hydraulic Systems Tube diameter: 32 - 101 mm Squares: 20 x 20 - 70 x 70 mm Rectangular: 40 x 20 - 80 x 50 mm Thickness: 0,8 - 3,0 mm Tube Length: 4 – 10 m Direction: Left - Right Material: Carbon steel – Hot rolled, pickled, galvanized, cold rolled Tensile: 330 – 520 N/mm2 Coil Weight: 2x6.000 Kg Coil Width: 50 – 250 mm Coil ID: 508 – 610 mm Coil OD: 1100 – 2000 mm

Condition: ready for operation (used), Walther Type CC 315 / Vibratory Finishing System -Model CC 315 -Speed range: 945–1445 rpm -Separate control: ON / OFF / TIMER etc. -Soundproof lid -Wastewater drainage device -Vibratory media -Dimensions (LxWxH): 2x1.6x1.6 meters / Weight: 850 kg Dujdpfx Aeyl Sg Ejaaop Subject to errors and input mistakes.

Condition: new, Year of construction: 2020, functionality: fully functional, Equipment: documentation/manual, Package 15 PP6715 – CS6715 Brinox LEP 11 – Pharma Chromatography and CIP System New – original packaging – Factory New Manufacturer: Brinox Model: LEP 11 Version: PP6715 with CIP System CS6715 Condition: New, unused, original packaging Description For sale is a high-quality pharmaceutical chromatography system Brinox LEP 11, consisting of the PP6715 control panel and the corresponding CS6715 CIP unit. The system is completely new, unused, and in the manufacturer's original condition. It was designed for industrial C1-INH chromatography and meets the highest GMP standards. Scope of Functions - Slurry transfer - Washing and elution processes - Transfer to pre-precipitation tanks - Gel disposal - Independent CIP loop Technical Features Dujdpfx Aaeyl Rqpeaep - Product-contacting components in stainless steel 1.4435 - Electropolished, Ra ≤ 0.8 µm - FDA-compliant sealing systems - CIP/SIP-capable - Operating pressure up to 6 bar - Temperature range up to 95°C - Fully drainable piping CIP Skid CS6715 - Stainless steel frame - Centrifugal pump - Shell-and-tube heat exchanger - Temperature control of cleaning media - Adjustable feed pressure The system is in factory-new condition with zero operating hours.

Year of construction: 2020, condition: new, functionality: fully functional, Equipment: documentation/manual, Package 14 PP6713 – CS6713 Brinox LEP 11 – GMP Chromatography System with CIP Skid New – unused – in original packaging Manufacturer: Brinox Model: LEP 11 Version: PP6713 with CIP System CS6713 Condition: New – in original packaging – never installed Description Offered is a pharmaceutical chromatography system LEP 11, consisting of the chromatography panel PP6713 and the corresponding CIP skid CS6713. The system is completely new, unused, and remains in the manufacturer’s original condition. The unit was designed for GMP-grade protein purification as part of C1-INH chromatography. System Features Cleanroom panel for wall integration Transfer lines to sieve-bottom tanks Precipitation vessel connection Gel waste disposal line Complete utility/process piping Technical Specifications Design pressure: –0.9 to +6 bar Design temperature: +2 to +95 °C Electropolished surfaces Ra ≤ 0.8 µm Material: 1.4435 stainless steel Fully drainable GMP-compliant design CIP System CS6713 Stainless steel frame construction Centrifugal pump Shell-and-tube heat exchanger Conductivity, pressure, and temperature monitoring Adjustable CIP supply flow The system is brand new and has never been in operation. Dsdpfx Asyl Rnneaajup

Condition: used, Hydraulic Profile Bending Machine, Pipe Bending Machine LANG Type Ondomat 60 Dedpsyi Hrwefx Aaaeup Serial No. 2589 Year of manufacture: 1970 Bending capacity max.: Ø 60 x 2 mm Pressing force: 20 tons Counterforce: 7.5 tons Maximum bending angle: 135° Tool stroke: 250 mm Maximum tool width: 125 mm External width of tool rocker: 90 mm Motor power: 18 kW Power supply: 380 Volt, 50 Hz - Hydraulic bending process with counterpressure cylinder for wrinkle-free bending - Up to 10 different bending angles in sequence via automatic indexing turret - Two-hand control panel - 1 set of bending dies Ø 30 mm, die width rocker = 78 mm, die width counterholder = 50 mm Required space (L x W x H): 2000 x 750 x 1500 mm Weight: approx. 2 tons Good condition

Condition: excellent (used), functionality: fully functional, Brabender Single Screw Extruder 30 mm – 30 L/D – with K-Tron Twin Screw Feeder – Strand Die For sale is a fully functional Brabender single screw extruder in a compact design, ideal for laboratory, development, or small-scale production applications. Technical Data: • Manufacturer: Brabender • Screw diameter: 30 mm • Process length: 25 L/D • Drive: 5.5 kW • Multi-zone heating system (5 zones) • Compact control cabinet with digital temperature control • Strand die adapted Features: • K-Tron twin screw feeder • Compact, clearly arranged control unit • Multiple heating zones with individual control Dsdpeyi Am Rofx Aaasup • Melt temperature & melt pressure monitoring Condition: • Fully functional • Well-maintained overall condition • Ready for immediate use A trial run with customer material is available upon prior arrangement.

Condition: new, Year of construction: 2020, functionality: fully functional, Equipment: documentation/manual, Brinox LEP 11 – Pharmaceutical Chromatography System with CIP Unit New, unused, original packaging Manufacturer: Brinox Model: LEP 11 Version: PP6711 with associated CIP unit CS6711 Condition: New – unused – original packaging (Factory New Condition) Description For sale is a Brinox LEP 11 pharmaceutical chromatography system, consisting of the chromatography panel PP6711 and the associated CIP unit CS6711. The system is completely new, unused, and in its original packaging. It was designed, manufactured, and delivered, but has never been installed or put into operation. Dodpfoyl Ndnox Aaaeup This unit is designed for C1-INH chromatography and is used for controlled protein purification using sieve-bottom vessels in a GMP environment. Process Functions • Transfer of loaded QAE resin (slurry) • Washing and elution processes • Transfer of eluate to pre-precipitation vessel • Gel disposal via container station • Fully automatic CIP and SIP cleaning Technical Data • Fully CIP and SIP capable • Design pressure: –0.9 to +6 bar • Design temperature: +2°C to +95°C • Flow rate up to 10 m³/h • Adjustable slurry transfer 0.2 – 3 m³/h Design Features • Product-contact parts made of stainless steel 1.4435 • Electropolished Ra ≤ 0.8 µm • FDA and EU-compliant seals • Drainable construction • Cleanroom panel with tri-clamp connection points • Magnetically monitored transfer arcs • 0.2 µm vent filter CIP Unit CS6711 • Compact stainless steel skid • Centrifugal pump • Shell-and-tube heat exchanger • Adjustable operating pressure • GMP-compliant design The system is in factory-new condition and has never been used in production.

Condition: good (used), Leco Type: Leco CS230 / Model: 619-000-300 Carbon / Sulfur Analyzer LECO CS230 Carbon/Sulfur Analyzer Carbon/Sulfur Determinator – Laboratory Instrument Description: For sale is a LECO CS230 Carbon/Sulfur Analyzer from the professional laboratory and industrial sector. This device is used for precise determination of carbon (C) and sulfur (S) in metallic and inorganic materials. Measurement is performed via high-temperature combustion with infrared detection, providing fast, reproducible, and highly accurate results. Typical areas of application include materials testing, metallurgy, quality control, research, foundries, universities, and industrial material analysis. Device includes PC, monitor, printer, software, manuals, and accessories as shown in the pictures. Features: - Analysis of Carbon (C) and Sulfur (S) - High-temperature combustion furnace - Infrared detection for precise measurement results - Fast analysis times - High reproducibility - Suitable for metals, steel, cast iron, minerals, ceramics, and more - Professional laboratory and industrial unit - CE compliant Technical specifications: Manufacturer: LECO Corporation (USA) Model: CS230 Model No.: 619-000-300 Available connections: - Oxygen (O₂) - Compressed air / Pneumatic - Vacuum connection - Data and printer interface Electrical data: - Mains voltage: 230 V AC - Frequency: 50 / 60 Hz Dusdpoyh I N Esfx Aaajp - Power consumption: 14 A - Phase: single-phase Device dimensions: Height: approx. 78 cm, Width: approx. 70 cm, Depth: approx. 60 cm Weight: approx. 133 kg Important note: The tables shown in the photos are not included in the sale. Condition: used Scope of delivery: (see photo) - LECO CS230 analyzer - PC + monitor + keyboard + mouse - Printer - Software / manual CDs - Documentation / paperwork - Accessories as seen in the photos (Subject to change and error in technical data and specifications!) If you have further questions, we would be pleased to answer them by phone.

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: ZCVS125, total width: 870 mm, total height: 950 mm, overall weight: 185 kg, input voltage: 380 V, warranty duration: 24 months, nominal power: 1.13 kW (1.54 HP), power: 1.13 kW (1.54 HP), workpiece width (max.): 150 mm, workpiece length (max.): 150 mm, ZCVS 125 CIRCULAR TYPE OF VIBRATORY MACHINE * Net 125 liter volume * Highly wear resistant P.U.Lining (90 Shore) * Dosing pump included. * Changeable valf for the wastewater decharging *According to requested diameter size for seperator MOTOR: * High performance three phase current drive motor. * 1,1 kW 1500 rpm (Italian OLI) * The motor is lubrication free. You don’t need motor lubrication. CONTROL PANEL: * Main switch and emergency stop switch. * Timer and working hours timer * Control box with switch for engine right/left running * CE safety standard PAINTING: *Colour in RAL 5011 & RAL 7036 Dujdpjh Agr Hjfx Aaaop *Epoxy paint is used to ensure long life of the paint

Condition: used, Vibratory parts feeder, vibratory finishing machine, circular vibratory bowl, tumbling drum, used machine Manufacturer: Rösler Oberflächentechnik Overall dimensions: Width: 1310 mm Depth: 1185 mm Height: 1440 mm Weight: 690 kg Trough size : Ø 1090, depth to discharge height : 240 mm Electrical data: 400 V Applications: deburring, grinding, polishing, cleaning Dodpjyh En Eofx Aaasup The Rösler R185 vibratory finishing machine is ideally suited for deburring, edge rounding, cleaning, and surface finishing of metal and other components. Reliable, industrial-grade German machine designed for continuous operation.

Condition: new, functionality: fully functional, This listing is for informational purposes only and does not constitute a legally binding offer. Vibratory Plate Compactor MS95 TECHNICAL DATA Model: MS95-2 CE Marking: Yes Frequency (vpm): 5,500 Power (kW): 4.8 Speed (cm/s): 40 Operating weight (kg): 95 Centrifugal force (kN): 15 Compaction depth (cm): 30 Year of manufacture: 2024 12-month warranty. Even after the warranty period, we offer all spare parts and professional service as needed. PRICE: €620 net Dsdpfxoyk T Ius Aaaoup €737.80 gross

Condition: new, functionality: fully functional, This listing is for informational purposes only and does not constitute a legally binding offer. Reversible Plate Compactor MS125 TECHNICAL DATA Model: ETP65-2 Engine: Petrol, LONCIN Engine type: G200F Power [kW/hp]: 4.8 / 6.5 Weight [kg/lbs]: 65 / 143 Vibrations per minute: 5400 Centrifugal force [kN]: 10 Compaction depth [cm/in]: 20 / 8 Forward travel speed [cm/s/in/s]: 40 / 16 Theoretical performance [m²/h/ft²/h]: 450 / 4800 Plate width [cm/in]: 50×36 / 20×14 Dimensions [cm/in]: 108×40×80 / 43×16×31 12-month warranty; after this period, we continue to provide all spare parts and professional service as needed. PRICE: Dsdpsyk T Hkjfx Aaasup €800 net €952 gross