Used Kasto Kastotec A5 for sale (128)

Condition: used, Year of construction: 2016, cutting diameter 430 mm saw band length 6830 mm cutting range 430 x 430 mm control Siemens Simatic HMI cutting speed 80 m/min height of material-table 700 mm dimensions of the machine ca. 5,36 x 6,83 x 2,41 m total power requirement 25 kW weight of the machine ca. 4920 kg Equipment/accessories: Knedoxb Edzjpfx Affjf - Infinitely variable cutting feed rate - Pump capacity 75 l/min - Roller conveyor - Chip conveyor - Technical documentation

Condition: good (used), Year of construction: 2003, Sawing capacity round 330 mm Sawing capacity flat 330 x 330 mm Max. Sawing speed 12 - 120 Knsdpfx Afsu Sq Eysfsf Saw blade dimensions 6830 x 41 x 1.3 mm Power 7.5 kW Saw weight 4300 kg

Year of construction: 2007, condition: ready for operation (used), Cutting range round: 560mm, cutting range flat (W x H): 620/560mm, material feed length, single: 900mm, multiple feed: 9999mm, shortest cut length: 6mm, minimum diameter to be cut: 15mm, minimum remnant in single cut: 15mm, shortest remnant length in automatic mode: 80mm, saw motor power, frequency-controlled: 5.5kW, cutting speed, stepless: 13-127m/min, saw blade dimensions: 7400/54/1.6mm, material support height: 700mm, total drive capacity in basic configuration: 12kW, length: 2370mm, width: 3610mm, overall dimensions with chip conveyor (L/W): 2370/3610mm, machine table height lowered: 2230mm, weight: approx. 5.2t with chip conveyor. An inspection on site is possible. Knjdpfxsxg Rhvo Affef

Condition: good (used), Year of construction: 2001, Manufacturer: KASTO Type: KASTOtec A3 Year of construction: 2001 Specifications: Metric Metric US Standard Sawing capacity round 90 330 Sawing capacity flat 90° 330 x 330 mm Max. Sawing speed 12 - 120 Saw blade dimensions 6830 x 41 x 1.3 mm Saw power 7.5 kW Dimensions (estimate) length 4600 mm width 2150 mm Kodpfju R R Acox Affsnf height 2310 mm weight 4300 kg Please note: The information on this page has been obtained from the manufacturer to the best of our knowledge and belief, and where possible, the information is given in good faith but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.

Year of construction: 2004, condition: ready for operation (used), A fully automatic Kasto band saw system is available. Cutting range at 90°: round material: 530mm, square material: 530mm/530mm, flat material: 530mm/640mm, saw blade length: 7675mm, saw blade width: 54mm, saw blade thickness: 1.6mm, cutting speed: 120m/min. Overall system dimensions X/Y/Z: approx. 5200mm/2700mm/2700mm, weight: approx. 6000kg. Including roller conveyors. Documentation available. On-site inspection is possible. Knsdpsv S E Edjfx Affjf

Condition: used, Year of construction: 1987, Technical details: cutting diameter: 520 mm Ksdpfxjvb Dqqe Affsnf saw band length: 7239 mm cutting width: 520 mm sawing motor: 5,5 kW cutting speed: 20 - 130 m/min cutting width at rectangle material: 520 mm total power requirement: 9,5 kW weight of the machine ca.: 3,8 t Machine with multi feed device chip conveyor infeed roller stand *

Condition: used, Year of construction: 1997, cutting diameter 520 mm saw band length 7239 mm cutting range square 520 x 520 mm feed length 500 mm feed length 4500 mm cutting length min. 6 mm 10/100 mm cutting speed 20 - 130 m/min dimensions of saw-band 7239 x 50 x 1,3 mm weight of the machine ca. 4,2 t dimensions 2300 x 3420 x 2385 m Control MINIPOS 807 CNC control Minipos 807 Special accessories: Knsdexfwd Iepfx Affof - Coolant device - Chip conveyor - Removal roller conveyor - Standard jaws

Condition: used, Year of construction: 1994, cutting diameter 520 mm saw band length 7239 mm cutting width 1,3 mm Control POSIMOD cutting range - square - 520 x 520 mm feed length 500 mm feed length: multiple 4500 mm min. cut-off length 6 mm length of rest piece min/max 10 / 100 mm cutting speed 20 - 130 m/min dimensions of saw-band 7239 x 50 x 1,3 mm sawing motor 5,5 kW total power requirement 10,0 kW weight of the machine ca. 3,8 t Kjdpfjwm Rm Isx Affenf dimensions of machine L x W x H 3,42 x 2,30 x 2,40 m - 2 column guided - Accessories: roller track 2500 mm length, chip conveyor, coolant

Condition: used, Year of construction: 2009, cutting diameter 15 - 560 mm 560 x 630 mm dimensions of saw-band 7.400 x 54 x 1,60 mm Kedpfx Aovxwkfsffsnf Control KASTO material feed - single 900 mm multiple feeding length max. 9.999 mm cutting length min. 6,00 mm sawing motor 5,50 kW cutting speed 13 - 127 m/min height of material-table 700 mm total power requirement 12,00 kW weight of the machine ca. 6,00 t dimensions of the machine ca. 3,70 x 2,50 x H2,50 m Automatic two-column band saw with KASTO Compact Control; frequency-controlled saw band drive; chip conveyor; infeed roller-conveyor electrically driven (6m), 3x roll-conveyor 1m and outfeed roller 2m; Machine can be inspected under power.

Condition: used, Year of construction: 1994, Cutting diameter 520 mm Blade length 7239 mm Kedjwqz Azjpfx Affonf Cutting width 1.3 mm POSIMOD control Cutting area square 520 x 520 mm Feed length 500 mm Feed length multiple 4500 mm Smallest section length 6 mm Remaining piece length min./max. 10 / 100 mm Cutting speed 20 - 130 m/min Saw band dimensions 7239 x 50 x 1.3 mm Saw motor 5.5 kW Total power requirement 10.0 kW Machine weight approx. 3.8 tons Machine dimensions L x W x H 3.42 x 2.30 x 2.40 m - 2-column-guided - Accessories: Roller feeder 2500 mm long, chip conveyor, cooling system

Condition: good (used), Year of construction: 2001, Machine-Details : Stock-No. 1022-2408 Type of machine Band Saw - Automatic - Horizontal Make KASTO Type POS A 2 Year of manufacture 2001 Type of control CNC Storage location Monheim (Germany) Country of origin Germany Delivery time Immediately Freight basis Ex warehouse, loaded on truck Technical details : cutting diameter 280 mm saw band length 4930 mm cutting width 280 mm capacity 90 degrees: square 280 x 280 mm saw diameter min. 10 mm cutting length min. 6 mm Weight of Material maxium 400 kg/m cutting speed 20 - 110 m/min sawing motor 2,2 kW dimensions of saw-band 4930 x 34 x 1,1 mm total power requirement 7 kW weight of the machine ca. 1,8 t dimensions of the machine ca. 2280 x 2680 x 2050 mm Additional information : Shortest Remaining Piece Length in Single Cut 15 mm Shortest Remaining Piece Length in Automatic Operation 80 mm Feed Length 700 mm Multiple Feed Length 9999 mm Cutting Speed Infinitely Variable 20-110 m/min Cutting feed: Infinitely variable Material clamping: Hydraulically infinitely variable, clamping pressure: 20-60 bar Equipment: CNC control Knjdpfox Nialox Affof Machine roller conveyor, dimensions: 2000 x 550 x 700 mm, weight: approx. 150 kg Machine documentation

Condition: ready for operation (used), total height: 1,915 mm, total length: 2,500 mm, total width: 1,290 mm, throat depth: 400 mm, empty load weight: 950 kg, nominal power: 6 kW (8.16 HP), Rond materiaal: Ø 400 mm Rechthoekig: 400 x 400 mm Maximaal materiaalgewicht: 1000 kg/m Snijsnelheid: 20 tot 110 m/min Afmetingen zaagblad: 5090 x 41 x 1,3 mm Hydraulische klemming spaantransportband Max height of workpiece: 400 mm Sawspeed: 20-110 m/min Kedpsxpymasfx Affenf Length of band saw: 5700 x 41 x 1.3 mm

Condition: used, Year of construction: 2002, cutting range 260 x 260 mm Kedpfex I Siysx Affsnf cutting speed 20 - 110 m/min weight approx. 2.100 kg In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - Chip conveyor Accessories, tools, and clamping devices shown are only included in the scope of delivery if specifically stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: used, Year of construction: 2005, Technical Data: Cutting Capacity: 90° round: 260 mm 90° flat: 300 x 260 mm 90° square: 260 x 260 mm +45° round: 200 mm Ksdpfx Afex Irx Ijfjnf +45° flat: 200 x 240 mm +45° square: 200 x 200 mm +60° round: 165 mm +60° flat: 160 x 120 mm +60° square: 150 x 150 mm -45° round: 200 mm -45° flat: 200 x 240 mm -45° square: 200 x 200 mm Shortest remnant length: 35 mm Total connected load: 2.0 kW Saw motor, frequency controlled output: 1.5 kW Infinitely variable cutting speed (frequency controlled): 20 – 110 m/min Saw blade dimensions: 2910 x 27 x 0.9 mm Dimensions and Weight: Length, approx.: 1020 mm Width, approx.: 1830 mm Height (upper section lowered), approx.: 1460 mm Height (upper section raised): 1900 mm Material support height: 950 mm Total weight, approx.: 510 kg Equipment: - Carbide saw blade guides, replaceable - Mechanical material clamping - Hydraulic feed for cutting - Mechanical saw blade tensioning - Saw blade cleaning by a driven, easily replaceable wire brush - Coolant system: feed via 1 coolant nozzle and 1 coolant hose, tank capacity approx. 45 l, pump performance 16 l/min

Condition: used, cutting diameter 320 mm Kodpsxb Eduofx Affsnf saw band length 6300 mm cutting range 420 x 320 mm control Siemens Simatic HMI cutting speed 20 - 130 m/min height of material-table 950 mm total power requirement 15 kW weight of the machine ca. 2920 kg dimensions of the machine ca. 6,35 x 6,76 x 2,41 m Machine overhauled by Kasto in 2016 Equipment/accessories: - Cutting feed continuously adjustable - Pneumatic connection 6 bar - Coolant 75 l - Pump capacity 40 l - Roller conveyor - Chip conveyor - Technical documentation

Condition: used, Bandsaw with infeed and outfeed conveyor Make: KASTO Kodpsx Hx Adefx Affsnf

Year of construction: 1989, condition: used, cutting diameter 420 mm saw band length 6300 mm table height 700 mm 0 5,5 kW cutting speed 20-130 m/min min. cut-off length 6 mm min. dia. 10 mm weight of the machine ca. 2,9 t dimensions of the machine ca. 2,4x3,3x2,4 m Fully automatic band saw, saw band tension hydraulic, cutting feed continuously variable, material feed hydraulic, automatic feed with horizontal vice. Clamping force: approx. 400-2000 daN Coolant supply via three coolant nozzles, approx. 135 l, approx. 30 l/min. Kedorc I H Eopfx Affsnf

Condition: good (used), Year of construction: 1980, functionality: fully functional, Band Saw Kasto BSM 420Article number: 19-03-028Manufacturer: KastoGood overall conditionMachine workshop-testedDelivery time: Immediate - Sale subject to prior saleYear of manufacture: approx. 1980Dimensions (L x W x H): approx. 1300 x 800 x 1400mmWeight: approx. 1000kgSaw blade dimensions: approx. 650 x 55 x 2.5mmCutting area: 90 degreesRound: approx. Ø420mmSquare: approx. 300 x 300mmFlat: approx. 420 x 420mmCutting area: 45 degreesRound: approx. Ø320mmSquare: approx. 260 x 260mmFlat: approx. 320 x 260mmMiter cutting: approx. 0-45 degreesAccessories:Adjustable cutting pressureAdjustable stroke rateCoolant systemFoot switchRotary tableFurther accessories on requestPrice and additional technical data on request Kjdewl Aprepfx Affonf

Condition: used, Year of construction: 2009, cutting range 260 x 260 mm cutting speed 20 - 110 m/min weight approx. 1.700 kg In our assessment, the machine is in good used condition and can be inspected under power by appointment. Kodpfx Ajx I Siteffsnf Technical features & accessories: - Roller conveyor - Chip conveyor Accessories, tools, and clamping devices shown are only included in the scope of delivery if specifically stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Year of construction: 2009, operating hours: 36,000 h, condition: ready for operation (used), General Data Measurements width 1500 mm Measurements depth 4800 mm Measurements height 1900 mm Machine weight 2700 kg Additional Equipment Voltage: 400 V With automatic feed Residue bunker Coolant device Mitre cut Kodpex D Sf Djfx Affsnf Loading station, chain magazine with 20 compartments on the infeed side Discharge sorting station, discharge side with 5 m long apron conveyor and programmable discharge stations on both sides Minimum quantity lubrication including 2x shelfs from Kasto This KASTO KASTOflex F Circular Metal Saw was manufactured in 2009. It features a weight of 2700 kg, operates on 400 V, and includes an automatic feed, residue bunker, and coolant device. It supports mitre cuts and has a loading station with a 20-compartment chain magazine. The discharge side boasts a 5 m long apron conveyor with programmable discharge stations. Consider the opportunity to buy this KASTO KASTOflex F Circular Metal Saw. Contact us for more information. Application Types Sawing

Condition: good (used), Year of construction: 2007, functionality: fully functional, Technical details cutting diameter 730 mm saw band length 9195 x 67 x 1,6 mm cutting width 830 mm Control Kasto EasyControl saw band speed 12 - 120 m/min total power requirement 30 kW Knjdex D Td Iopfx Affjf weight of the machine ca. 11,6 t dimensions of the machine ca. 4800 x 2600 x 2870 mm Additional information Machine is in good condition. On 7th. October 2025 the bearings of the roller wheel (belt tensioning side) have been replaced by KASTO and the switch for the belt tension was replaced. The machine can be demonstrated under power in our warehouse. Heavy-duty, high-performance band saws with a horizontally and parallel-traversing saw blade for cutting solid material, profiles, and pipes of all qualities, including difficult-to-cut materials such as titanium, Hastelloy, Inconel, etc. The optimal use of carbide or bi-metal saw blades was consistently considered during the development of these machines. Cutting range Cutting diameter: 730 mm Cutting width: 830 mm Saw blade size: 9195 x 67 x 1.6 mm Total power requirement: 30 kW Machine weight: 11600 kg Machine dimensions (L x W x H): 4800 x 2600 x 2870 mm Equipment: Carbide package With driven heavy-duty roller conveyors for the infeed and outfeed sides. Roller conveyor on the inlet side, dimensions (LxWxH) 4000x1000x500 mm Roller conveyor on the outlet side, dimensions (LxWxH) 3000x1000x500 mm Weight 2000 kg Chip conveyor

Condition: good (used), Year of construction: 1998, Semi-automatic circular sawing machine Make KASTO Type:V350 U Year 1998 with mitre cut, roller conveyor and stop Saw blade dm.350mm Pneumatic vice and saw feed Stepless. Machine little used in good condition. Kodpfx Ajfym Ewjffjnf

Year of construction: 1976, condition: used, cutting diameter 460 mm saw band length 4623 mm table height mm 0 4 kW Knjdpfxsrc I Hto Affof cutting speed 8-80 m/min weight of the machine ca. 2,5 t dimensions of the machine ca. 2,3y2,7x2 m

Condition: good (used), Year of construction: 2000, Hacksaw, KASTO, Type: PSB 280U, Year 2000 Cutting range: Round max.: 280 mm Flat max.: 280 mm x 160 mm Square max.: 240 mm x 240 mm 2 motor speeds Transport weight approx. 500 kg. Kjdpfx Afswgnk Rsfsnf With miter cut, length stop, coolant system, machine documentation available. Machine in good technical and visual condition.

Condition: excellent (used), Year of construction: 2012, KASTO circular saw, type: radial M6, year of manufacture 2012 In very good condition, like new. Barely used. Cutting range: Circular max: 90 mm Knsdewah E Uopfx Affsf Cutting speed: 26/53 m/min Saw blade: 315 x 2.5 x 32 mm Coolant system. Weight approx. 210 kg. Machine documentation available. For further information, see data sheets.